Engel ES650H/200W-200HL-2F

Engel ES650H/200W-200HL-2F

Stav: pripravené na použitie (použité), Rok výroby: 2000, prevádzkové hodiny: 63 929 h, upínacia sila: 2 000 kN, výrobca ovládačov: ENGEL, model regulátora: CC 200 (CC200), This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2000. It features a clamping force of 2000 kN, tie bar spacing of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with two injection units, hydraulic locking system, and rotary table control, it ensures precise and efficient operation. If you are looking for a high-quality injection molding machine, consider the Engel ES650H/200W-200HL-2F machine we have for sale. Contact us for further information. • Condition: Well-maintained and serviced • Clamping unit: • Max. mold weight: 1500 kg • Total weight: 3000 kg • Tie bar spacing (H × V): 920 × 750 mm • Platen size: 1150 mm • Opening stroke: 700 mm • Daylight (open): 700 mm • Min. mold height: 450 mm • Max. mold height: not specified • Ejector stroke: 150 mm • Ejector force: 61 kN • Retraction force: not specified • Centering diameter (A side): 110 mm • Centering diameter (B side): 90 mm • Locking system: Hydraulic / Pneumatic • Number of cores: 4 • Rotary table control: Yes • Core pull control: Yes • Index plate control: Yes • Injection Unit 1 (650H): • Max. shot volume: 200 cm³ • Stroke volume: 392 cm³ • Screw diameter: 50 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1240 bar • Injection speed: 120 g/s • Plasticizing rate: 41 g/s • Nozzle opening: 15 mm • Installed pump: 30 / 12.3 kW • Injection Unit 2 (200W): • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection speed: 60 g/s • Plasticizing rate: 12 g/s • Nozzle opening: 15 mm • Installed pump: ~6.8 kW • Controls and Functions: • SPC (Statistical Process Control): Yes • Printer interface: Yes • 2nd injection cylinder: Yes • Mold monitoring: No • Special programs: Yes Hnedpfjyf Htysx Agmoi Additional Equipment • Part removal device (robot): ERC 23/1-E • Travel paths: X = 500 mm, Z = 1400 mm • Max. mold dimensions (Y-axis): 1000 mm • Hotrunner control: 18 zones • Mold sensors: p-z-t-σ (Kistler) • Additional equipment: GealanXcomp • Automation cell: No • Filter dryer: No

Stav: dielensky repasované (použité), Rok výroby: 2001, Funkcionalita: plne funkčný, číslo stroja/vozidla: 3595, Dear Ladies and Gentlemen, Hnodpfx Aothd Shjgmoi For sale is a Weiler Commodor B lathe, year of manufacture 2001, equipped with a Heidenhain 3-axis digital display. The machine has undergone extensive partial overhauling in our workshop. Among other things, the main spindle bearing as well as the feed/lead screw bearing have been completely renewed! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to verify on-site. Availability: on request Machine no.: 3595 Year of manufacture: 2001 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 – 0.888 mm/rev Possible thread types: metric, imperial, module, diametral pitch Metric thread pitches: 0.35 – 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (L x H x W) Weight: approx. 1.8 t Further equipment and accessories: 3-axis digital display, coolant system, chuck guard, pull-out chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various clamping jaws, etc. Our service promise to you: - We are a certified master enterprise in mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul the selected machine - On request, we can repaint the selected machine in your desired color - On request, you can order additional accessories such as tools directly - On request, we can install further accessories such as safety devices - We are happy to assist with shipping and/or installation

Stav: pripravené na použitie (použité), Rok výroby: 2004, prevádzkové hodiny: 96 194 h, upínacia sila: 2 000 kN, priemer skrutky: 40 mm, vstrekovacia hmotnosť: 216 g, This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2,000 kN and platen size of 920 x 760 mm. The machine is equipped with a two-component system with screw diameters of 40 mm and 25 mm, as well as an ERC 23/1-E robotic system for enhanced automation. Ideally suited for precise hydraulic injection molding applications. Please contact us for further information about this machine. • Configuration: 2K (Two-component injection molding machine) • Clamping Unit: • Platen dimensions (H x V): 920 x 760 mm • Min. mold height: 500 mm • Opening stroke: 750 mm • Max. daylight (distance between platens): 1,150 mm • Max. mold weight: 3,000 kg (1,500 kg per side) • Ejector stroke: 150 mm • Ejector force: 80 kN • Core pulls: 3 (ejector side) • Centering ring diameter (ejector side): 200 mm • Injection Unit 1 (Primary – 650H): • Screw diameter: 40 mm • Injection pressure: 1,946 bar • Shot volume (overflown): 251 cc • Shot weight (PS): 216 g • Screw speed: 290 rpm • L/D ratio: 20 • Nozzle radius: 15 mm • Injection Unit 2 (Secondary – 200W): • Screw diameter: 25 mm • Injection pressure: 2,089 bar • Shot volume (overflown): 69 cc Hodpfeyfrb Nox Agmsni • Shot weight (PS): 60 g • Screw speed: 480 rpm • L/D ratio: 24 • Interfaces/Control: Printer interface; process control available Additional Features • Robot system: ERC 23/1-E linear robot • X-axis travel: 500 mm • Y-axis travel: 1,000 mm • Z-axis travel: 1,600 mm • Hot runner controller: 16 zones

Stav: pripravené na použitie (použité), Rok výroby: 2004, Funkcionalita: plne funkčný, 1,0 ks použitý dvojzložkový vstrekovací lis s robotom Výrobca: ENGEL Typ: ES650H/200W-200HL-2F Rok výroby: 2004 Uzváracia sila: 200 ton Vzdialenosť medzi stĺpmi: bezstĺpová konštrukcia Min. montážna výška: 500 mm Hjdpfoyak A Iex Agmeni Otvorenie stroja: 750 mm Priemer skrutky 1: 40 mm Max. dávkovací objem: 251 cm³ Hmotnosť výlisku v PS: 216 g Priemer skrutky 2: 25 mm Max. dávkovací objem: 69 cm³ Hmotnosť výlisku v PS: 60 g Ovládanie: CC100 Technické vybavenie: -Robot Engel, typ: ERC23/1-E -4 kusy jadrových ťažných zariadení -Ovládanie otočného stola

Rok výroby: 1988, stav: použitý, číslo stroja/vozidla: 103.071.3156.78192, Priemer pílového kotúča: 400 a 425 mm Hodpfx Agsz N Amemsni Rezací rozsah pri 90° kruhové: 130 mm Rezací rozsah pri 90° štvorcové: 120 x 120 mm Rezací rozsah pri pokose 45° kruhové: 130 mm Rezací rozsah pri pokose 45° štvorcové: 110 x 110 mm Rezné rýchlosti: 11 a 22 m/min Posuvné rýchlosti: 670 mm/min Dĺžka odrezku: s automatickým podávaním do 1200 mm Elektrické pripojenie: 380 V, cca 4 kVA Pohon píly: 1,6/2,5 kW Potrebný priestor: 1800 x 3800 x 2000 mm Hmotnosť: cca 1800 kg

Stav: nový, Vzdialenosť medzi hrotmi ----- 1000 mm Výška stredu ----- 180 mm Priemer sústruženia ----- 360 mm Priemer otvoru hlavného vretena ----- 40 mm Hodpoga Ty Esfx Agmjni Šírka lože ----- 260 mm Otáčky vretena ----- 40-1800 ot/min Motor ----- 2,4 kW Hmotnosť ----- 1350 kg OBSAHUJE * 3-osé digitálne odpočítavanie značky SINO * Rýchloupínací držiak nožov typu Multifix TOOE5 so 4 vozíkmi * 3-čeľusťové skľučovadlo 200 mm * 4-čeľusťové skľučovadlo 200 mm * Upínacia doska 250 mm * LED pracovné svetlo a chladiaci systém * Pevná a nasledujúca luneta ŤAŽKÉ PREVEDENIE S LIATINOVÝM PODSTAVCOM

Stav: dielensky repasované (použité), Rok výroby: 2002, Arburg Allrounder 420C 1000-350/150 Arburg bimaterial injection moulding machine with a clamping force of 100 tonnes. Year of manufacture: 2002. 79,115 operating hours. The machine will be delivered completely refurbished by our expert technical team and in perfect working condition. We can offer installation and commissioning at your facility, ensuring correct operation. Extras: Rotary table, Geiger robot, Wanner granulator. Technical Details CLAMPING FORCE: 1000 kN SCREW DIAMETER: Horizontal 40mm Bimetallic SCREW DIAMETER: Vertical 25mm INJECTION PRESSURE: 2500 BAR vertical / 2120 BAR horizontal INJECTION VOLUME: Horizontal 182 cm³ Hnjdpop Audqjfx Agmei INJECTION VOLUME: Vertical 54 cm³ TIE BAR DISTANCE: 420 x 420 mm MINIMUM MOULD HEIGHT: 250 mm MAXIMUM DISTANCE BETWEEN PLATENS: 750 mm OPERATING HOURS: 79,115 YEAR OF MANUFACTURE: 2002

Stav: dobrý (použitý),

Rok výroby: 2003, stav: generálne opravený (použitý), číslo stroja/vozidla: 50/140/03, GENERAL CHARACTERISTICS Grinding Wheel Dimensions (OD x ID x width): 508 mm Regulating Wheel Width: 254 mm Dressing Speed: Ø508 x 254 mm Lubrication (Auto/Manual): centralized automatic CNC Brand: FANUC CNC Model: Series 18i - T Number of CNC Axes: 8 Grinding Wheel Width: 254 mm ELECTRICAL CHARACTERISTICS Total Power: 25 kW Voltage: 220/380 V DIMENSIONS AND WEIGHTS Length: 2150 mm Width: 2200 mm Hsdpfx Agjd Nw T Iemoni Height: 3400 mm Weight: 8000 kg

Stav: veľmi dobrý (použitý), Rok výroby: 1998, Engel ES 330/80 HLS Uzatváracia sila: 80 ton Rok výroby: 1998 Skrutka: 35 mm Zdvihový objem: 154 cm³ Zväčšená rozpínacia doska: 660 x 560 mm Minimálna výška vstavaného nástroja: 200 mm Hsdpfxjpdr Aie Agmjni