Zariadenia Na Dopravu Granulátu kúpiť použité (94 987)

Stav: ako nová (výstavný stroj), Rok výroby: 2022, celková hmotnosť: 68 kg, tlak: 10 lišta, vstupné napätie: 230 V, dĺžka balíka hadíc: 5 000 mm, Suchý ľadový pieskovač CRYONOMIC COB62+. Demonštračný stroj používaný distribútorom v Poľsku na prezentácie, stav ako nový. Používaný približne 20 hodín na ukážky. V cene dodávky: zariadenie, 5 m hadica, pištoľ so štandardnou tryskou. Maximálny pracovný tlak: 10 bar. Spotreba vzduchu: 0,5 - 5,5 m³/min. Spotreba suchého ľadu: 20 - 80 kg/h. Lrsdpfxoq Rvako Afgjk Možnosť použitia dodatočného abrazívneho modulu pre intenzívnejšie čistenie pomocou abrazíva. Možnosť použitia LED osvetlenia na pištoli. Jednoduchá a spoľahlivá obsluha a konštrukcia, podporená viac ako 30 rokmi skúseností vo výrobe zariadení na čistenie suchým ľadom. Vyrobené v Belgicku.

Stav: dobrý (použitý), Položka: D-1717-Fischer etiketovačka Fischer dvojitý etiketovací stroj Namontováno na rámu z nerezové oceli. Nastavitelná poloha etiket. Lrjdpjidmvrofx Afgsk Dopravní pás 1600 x 200 mm. Etiketování shora a z boku produktu! Maximální šířka etikety 100 mm Snímač čte etikety Stroj se nachází v Dánsku!

Stav: dobrý (použitý), 107 POUŽITÝCH VOZÍKOV pre dávkovacie zariadenia na žemle a bagety. - 13 vozíkov s dávkovacími zariadeniami: - 3 vozíky na zariadenia bez plátien (pásy) ROZMERY DÁVKOVACÍCH ZARIADENÍ: - šírka 83 cm, - dĺžka 71 cm, - šírka plátna 77 cm. ROZMERY VOZÍKA: - 90x72 cm, - výška 213 cm, - počet úrovní: 18 POZOR: Cena za celý komplet, t.j. 18 zariadení + vozík: 700 €. Ljdpfx Asw A Rlpsfgork Zariadenie sa nachádza v našom sklade (36-068 Bachórz, Poľsko). Uvedená cena je bez DPH HOVORÍME PO ANGLICKY, NEMECKY, FRANCÚZSKY, RUSKY A UKRAJINSKY.

Rok výroby: 2018, stav: veľmi dobrý (použitý), Spoločnosť Metals Minerals Sp. z o. o. ponúka na predaj zariadenia 3VST 2000 P / INSON na ultrazvukové čistenie vstrekovacích a tlakových foriem, jadrových skriniek, vložiek a dielov. Kompletný systém ultrazvukového čistiaceho zariadenia pozostáva z: troch nádrží, odlučovača oleja, záchytnej vane, platformy so schodmi a koša s policami na čistenie drobných dielov a príslušenstva. Výrobcom zariadenia je spoločnosť FISA, popredný výrobca zariadení na ultrazvukové čistenie tlakových a vstrekovacích foriem, jadrových skriniek, vložiek a dielov. Zariadenie je možné po dohode obhliadnuť v meste Końskie. Ljdpjirfb Nefx Afgjrk

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Use of Photoelectric Sensors Lsdpfx Afsfz Dubogjrk The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, 7-inch touch panel The large color touch panel makes parameter input even easier and more convenient. 5 programs with 50 steps each It is possible to program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Information about gas and oil consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate the consumption and cost of each firing process. USB storage Every firing process is logged, and the data can be transferred to a USB stick for analysis on a PC. Each file is automatically created for a single firing process, recording extreme temperatures and exact timing. Files are saved in *.csv (Excel spreadsheet) format. For all customers until the end of 2016, this feature is free of charge. At other companies, this can cost several thousand euros. Storage of the last 20 firing processes Is something wrong? Did too few items come out of the kiln? Now you can check the exact parameters of the firing process, such as duration or potential issues. New! Timer It is possible to set the start time, allowing the kiln to turn on automatically before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction system can be programmed to open a few minutes before the end of the firing process to vent smoke from the chamber. The smoke extractor can also be controlled via the touch panel. Process duration timer Using the heating dynamics, the process duration is calculated and the end time of the firing process is displayed. Self-closing doors To open, simply pull the door. To close, just push—it will close automatically. Exhaust hood above the door (optional) Lrodpfx Afjfz Apqsgok To minimize hall heating caused by opening the door, an exhaust hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for customers purchasing a large kiln who wish to use only part of the kiln. The oven is equipped with a movable partition wall and dedicated control system. 2 in 1 (optional) It is possible to use both chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. Ljdpfefz Dt Nex Afgork In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Lrodpfxefz I D Dj Afgsk Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Lrodpfx Ajfz I Edefgjk Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, 7-inch touch panel The large color touch panel makes parameter input even easier and more convenient. 5 programs with 50 steps each It is possible to program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Information about gas and oil consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate the consumption and cost of each firing process. USB storage Every firing process is logged, and the data can be transferred to a USB stick for analysis on a PC. Each file is automatically created for a single firing process, recording extreme temperatures and exact timing. Files are saved in *.csv (Excel spreadsheet) format. For all customers until the end of 2016, this feature is free of charge. At other companies, this can cost several thousand euros. Storage of the last 20 firing processes Is something wrong? Did too few items come out of the kiln? Now you can check the exact parameters of the firing process, such as duration or potential issues. New! Timer It is possible to set the start time, allowing the kiln to turn on automatically before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction system can be programmed to open a few minutes before the end of the firing process to vent smoke from the chamber. The smoke extractor can also be controlled via the touch panel. Process duration timer Using the heating dynamics, the process duration is calculated and the end time of the firing process is displayed. Self-closing doors To open, simply pull the door. To close, just push—it will close automatically. Exhaust hood above the door (optional) To minimize hall heating caused by opening the door, an exhaust hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for customers purchasing a large kiln who wish to use only part of the kiln. The oven is equipped with a movable partition wall and dedicated control system. 2 in 1 (optional) Lsdpfx Afsfzkrnsgork It is possible to use both chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Rok výroby: 2020, stav: nový, Transport Systems Lrsdpfxsflmdwo Afgok Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Lredpfsfz Nb Tex Afgsk Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. Lrodofz U S Espfx Afgek In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, 7-inch touch panel The large color touch panel makes parameter input even easier and more convenient. 5 programs with 50 steps each It is possible to program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Information about gas and oil consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate the consumption and cost of each firing process. USB storage Every firing process is logged, and the data can be transferred to a USB stick for analysis on a PC. Each file is automatically created for a single firing process, recording extreme temperatures and exact timing. Files are saved in *.csv (Excel spreadsheet) format. For all customers until the end of 2016, this feature is free of charge. At other companies, this can cost several thousand euros. Storage of the last 20 firing processes Is something wrong? Did too few items come out of the kiln? Now you can check the exact parameters of the firing process, such as duration or potential issues. New! Timer It is possible to set the start time, allowing the kiln to turn on automatically before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction system can be programmed to open a few minutes before the end of the firing process to vent smoke from the chamber. The smoke extractor can also be controlled via the touch panel. Process duration timer Using the heating dynamics, the process duration is calculated and the end time of the firing process is displayed. Lodpfx Aofz U Tiefgerk Self-closing doors To open, simply pull the door. To close, just push—it will close automatically. Exhaust hood above the door (optional) To minimize hall heating caused by opening the door, an exhaust hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for customers purchasing a large kiln who wish to use only part of the kiln. The oven is equipped with a movable partition wall and dedicated control system. 2 in 1 (optional) It is possible to use both chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Stav: použitý, Funkcionalita: plne funkčný, výkon: 260 kW (353,50 k), prvá registrácia: 05/2001, typ paliva: nafta, farba: oranžová, konfigurácia náprav: 1 náprava, palivo: nafta, Rok výroby: 2001, prevádzkové hodiny: 2 590 h, číslo stroja/vozidla: 15, SCHMIDT - VAMMAS SB 3600 H Lodpfepgvlksx Afgsrk Pripravený na použitie

Stav: použitý, Priemer koša: 410 mm Priemyselný umývací automat Emsa Rotatherm Mini na čistenie dielov a náradia od tuku, oleja, živice, vosku, farieb, triesok a mnohých ďalších nečistôt. Ledpfxox Sx Ecs Afgjrk

Stav: nový, Počet: 33 pozícií Hmotnosť: 52 kg Stav: nový Priemer otvoru: 28 mm Sada 1: 33-dielna, systém 28 mm, pozostáva z: Lredpofh N Ekjfx Afgsk Sverky: 4 x 280610.N Sverky: 2 x 280630.N Prizma: 2 x 280648.1.N Čap: 12 x 160511 Doraz: 4 x 280410.N Doraz: 4 x 280420.N Uholník: 2 x 160110.N Uholník: 2 x 280152.N Príslušenstvo – súprava: 1 x 283999 Cena nezahŕňa balenie a dopravu.

Stav: nový, Počet pozícií: 37 Priemer otvoru: 28 mm Stav: nový Hmotnosť: 29 kg Basic-Set 1, 37-dielny, systém 28 mm, pozostáva z: Lrsdpfxegazl Re Afgjk Prítlačné zvierky: 4x 280604 Kolíky: 8x 280511 Dorazy: 6x 280420.N Uholníky: 2x 280110.G Závitové čapy: 8x 280543 Dorazy: 8x 160415 Príslušenstvo: 1x 163999 Cena bez obalov a dopravy.

Stav: neskontrolované (použité), Funkcionalita: neoverené, Magnet za dvigalo ali bager Lrodpfx Afjtp Iqvogsk

Rok výroby: 2002, stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Vážený pán/pani, máme možnosť Vám ponúknuť zariadenie na plazmové (iónové) nitridovanie značky PLATEG. Komora je s horúcou stenou. Zariadenie je vo vynikajúcom stave, plne funkčné, bez akýchkoľvek problémov, pripravené na okamžité použitie. Charakteristika zariadenia: - Rozmery konštrukcie: 2700 mm x 1250 mm x 800 mm - Rozmery komory: priemer 1000 mm x 1200 mm - Maximálny rozmer vsádzky na nitridáciu: priemer 900 mm x 900 mm Ljdpfovfm I Hox Afgjrk - Celkový príkon zariadenia: 70 kVA - Výkon vyhrievačov: 30 kW - Výkon plazmového napájania (BIAS): 30 kW - Plazmové napájanie je unipolárne, napätie 0–1000V, prúd 0–60A, DC až 33 kHz, nastaviteľné impulzy (Pulse On a Pulse Off) - Plazmový zdroj (BIAS) je starý iba jeden rok, zakúpený v Nemecku (firma El Connect) - Vákuová pumpa: Pfeiffer Vacuum 65 - Vákuový systém je riadený novou elektrickou skriňou s PLC a HMI - 4 MFC na dávkovanie plynov - Proces plazmového nitridovania, proces pooxidácie Spoločnosť Planit poskytuje aj montáž zariadenia, údržbový manuál, používateľský návod, technológiu (nitridácie a oxidácie) ako aj servis. V prípade akýchkoľvek otázok nás neváhajte kontaktovať. S pozdravom.

Rok výroby: 2025, stav: nový, Výber NOVÝCH bezvzduchových striekacích zariadení Q-Tech QT550 – 220/240V – dostupné ako hromadná sada alebo na individuálny nákup. Ledoy Ambgopfx Afgork Využitie: vnútorné steny a stropy, vonkajšie steny a strechy. Prietok: 5,5 l/min. Maximálna veľkosť trysky: 0,031". Max. pracovný tlak: 227 bar/3 300 psi. Motor: 1 500 W DC. Kompletná výbava: striekacia pištoľ QTech Q345 Airless, trysky QTech Contractor 517 a 531, ochrana Contractor, hadica s textilným opletením 3/8" x 15 m, hadica s textilným opletením 1/4" x 1 m. Hmotnosť: 59 kg. Sériové číslo: 2025047001 (2025).

Rok výroby: 2003, stav: použitý, Rôzne otryskávacie zariadenia na predaj! Valčeková otryskávacia linka Otryskávacie zariadenie s korýtkovým pásom Lredpfxo Hq S Ds Afgek Závesná otryskávacia linka Otočný stôl otryskávacie zariadenie Otryskávacia kabína Tlaková otryskávacia nádoba

Stav: ako nová (výstavný stroj), Funkcionalita: plne funkčný, Rok výroby: 2006, číslo stroja/vozidla: 6770-22060, LEICA 6770 - Zarovnávač lúčov Lsdpfx Afethlausgork Zariadenie je NOVÉ, nikdy nebolo použité!!!

Stav: nový, - Špeciálne stroje na výrobu montážnych dielov pre solárne systémy vo veľkosériovej výrobe - Pílenie - Vŕtanie - Frézovanie - Rezanie závitov Lredpfxjmft Dqo Afgok - Modulárna konštrukcia: možné prispôsobiť Vašim individuálnym požiadavkám

Stav: použitý, REWA 470 /27 Item No.: RE-HU-2015-0801-1 Lrsdpfx Afsb U Du Aogjk System: Dewatering unit, refurbished Type: Chamber filter press 470/27 with Abel piston diaphragm high-pressure pump Design: Side bar guided Filter plate size: 470x470 mm Number of plates: 27 Filter plates: PP (polypropylene) Cake thickness: 30 mm Discharge: open Filter cloths: optionally available, selected to match the medium Open filter area: approx. 10.1 m² Press volume: approx. 135 dm³ Plate pack length: approx. 1600 mm Filtration pressure: approx. 15 bar Closing pressure: approx. 380-410 bar Plate transport: manual Pump technology: Abel piston diaphragm high-pressure pump Accessories: Available depending on configuration and customer requirements Special services: We offer between 6 and 12 months warranty on this unit. Condition: The equipment is in good condition and ready for immediate use. Purchase or rental: Systems can be inspected at our facility by prior arrangement. Would you like to rent or purchase this unit? Contact us—we are happy to assist you.