Gebr. Liebisch Soľná Sprejová Komora Zariadenia Na Testovanie Korózie kúpiť použité (95 889)

Stav: použitý, Type: TSD-100 100 litres of usable test chamber volume for larger test specimens up to 30 kg. Complies with all common international standards. Water-cooled Temperature range (hot chamber): +60 °C to +200 °C Temperature range (cold chamber): -70 °C to 0 °C Test chamber dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Programmable control via touch panel Automatic defrost Hsdexugq Aspfx Admonk Overtemperature protection Operating hours counter Mobile design 2 stainless steel specimen baskets Cable port Ø 100 mm Refrigerants: 3 kg R404A, 1 kg R23 Power supply: 400V 3Ph 50Hz Max. power consumption: 32A Condition: used Weight: 1100 kg Your safety as a buyer—please note the following information! The following procedures are performed on all chambers we offer, in advance: 1. Functional check and replacement of necessary components 2. New legally compliant refrigerant filling if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, výkon: 27,21 kW (37,00 k), typ paliva: nafta, typ prevodu: hydrostatický, Rok výroby: 2012, prevádzkové hodiny: 542 h, Výbava: pohon všetkých kolies, registrácia vozidla,

Rok výroby: 2025, stav: nový, Univerzálna skúšobná stroj PM50 Sila: 50 kN Zdvih priečnika: 1200 mm Montážny priestor: 400 mm Celková výška: 1817 mm Hmotnosť: cca 380 kg Rozlíšenie posunu: 0,01 mm Skúšobná rýchlosť: 0,03–1000 mm/min Rýchlosť návratu: 1000 mm/min Snímač sily: 50 kN Vrátane vyhodnocovacej elektroniky a základného softvéru. Naše skúšobné stroje sú ovládateľné v samostatnej prevádzke pomocou numerickej klávesnice, čo umožňuje „rýchle testovanie“ aj bez počítača. Pre skúšky, ktoré vyžadujú ukladanie dát a zaznamenávanie priebehových kriviek, ponúkame možnosť riadenia a vyhodnocovania prostredníctvom základného softvéru. Ten umožňuje generovanie rôznych testovacích sekvencií a vytváranie skúšobného protokolu. Okrem toho máte možnosť exportovať surové dáta na ďalšie spracovanie vo vlastných programoch. Hnedpfx Aded R Dp Eomsk Voliteľné príslušenstvo: - Dodanie a uvedenie do prevádzky - Kalibrácia podľa DAkkS alebo certifikácia podľa DIN EN ISO 7500-1 - Upínacie prípravky: tlakové platne, ohýbacie zariadenia, strihacie prípravky, klinové upínacie čeluste, nožnicové upínače, zariadenia na olúpanie, skrutkové upínače, pneumatické upínače a hydraulické upínače.

Stav: dobrý (použitý), Položka: D-1717-Fischer etiketovačka Fischer dvojitý etiketovací stroj Hsdoidmvrjpfx Admonk Namontováno na rámu z nerezové oceli. Nastavitelná poloha etiket. Dopravní pás 1600 x 200 mm. Etiketování shora a z boku produktu! Maximální šířka etikety 100 mm Snímač čte etikety Stroj se nachází v Dánsku!

Stav: veľmi dobrý (použitý), Rok výroby: 2008, Funkcionalita: plne funkčný, Kompletná inštalácia chladiaceho systému na báze amoniaku: Typ: Piestový chladiaci systém Kolbenverdichterkalteanlage V1 412 E a VF 612 E Rok výroby: 2008 Chladiaci výkon: 760 kW Chladivo: amoniak NH3/ R717 Povolené prevádzkové tlaky: nízkotlaková strana -1/12 bar, vysokotlaková strana -1/17 bar Chladiaca inštalácia pozostáva z: 2 piestových chladiacich kompresorov GEA Grasso, typ: (1x) Grasso 612E package, (1x) Grasso 412E package, tlaková nádoba EM Polar, typ: DM1600; výparníkový kondenzátor Kühlturm GmbH, typ: KIV 2/12-28-12, 2; rozvádzače a riadiaca skriňa, 3 palety s ventilmi, doplnkové náhradné diely Hnedpfx Ajxg Ruijdmek - Grasso 612E package: 1 kus piestový kompresor Grasso/GEA typ 612E Elektromotor Leroy Somer 200 kW /1468 ot./min Rozmery: 3200 mm x 1900 mm x 2150 mm Chladiaci výkon 418,5 kW pri -10ºC/+40ºC Rok výroby: 2008 - Grasso 412E package: 1 kus piestový kompresor Grasso/GEA typ 412E Elektromotor Leroy Somer 132 kW /1468 ot./min Rozmery: 3200 mm x 1900 mm x 2150 mm Chladiaci výkon 325 kW pri -10ºC/+40ºC Rok výroby: 2008 - Tlaková nádoba EM Polar: 1 kus tlaková nádoba EM Polar, typ: DM1600 kapacita: 9580 litrov rozmery: 5200 mm x 1650 mm x 1900 mm Hmotnosť prázdnej nádoby: 2400 kg Rok výroby: 2008 - Výparníkový kondenzátor Kühlturm GmbH: 1 kus výparníkový kondenzátor Kühlturm GmbH, typ: KIV 2/12-28-12, 2 rozmery (2 časti): 6900 mm x 2500 mm x 2500 mm a 3200 mm x 2500 mm x 2150 mm Chladiaci výkon: 1098 kW Rok výroby: 2008 Ďalšie informácie na požiadanie.

Stav: ako nová (výstavný stroj), Rok výroby: 2022, celková hmotnosť: 68 kg, tlak: 10 lišta, vstupné napätie: 230 V, dĺžka balíka hadíc: 5 000 mm, Suchý ľadový pieskovač CRYONOMIC COB62+. Demonštračný stroj používaný distribútorom v Poľsku na prezentácie, stav ako nový. Používaný približne 20 hodín na ukážky. V cene dodávky: zariadenie, 5 m hadica, pištoľ so štandardnou tryskou. Maximálny pracovný tlak: 10 bar. Spotreba vzduchu: 0,5 - 5,5 m³/min. Spotreba suchého ľadu: 20 - 80 kg/h. Možnosť použitia dodatočného abrazívneho modulu pre intenzívnejšie čistenie pomocou abrazíva. Možnosť použitia LED osvetlenia na pištoli. Hnsdpfx Asq Rvaksdmjk Jednoduchá a spoľahlivá obsluha a konštrukcia, podporená viac ako 30 rokmi skúseností vo výrobe zariadení na čistenie suchým ľadom. Vyrobené v Belgicku.

Stav: použitý, Funkcionalita: plne funkčný, výkon: 260 kW (353,50 k), prvá registrácia: 05/2001, typ paliva: nafta, farba: oranžová, konfigurácia náprav: 1 náprava, palivo: nafta, Rok výroby: 2001, prevádzkové hodiny: 2 590 h, číslo stroja/vozidla: 15, SCHMIDT - VAMMAS SB 3600 H Hjdepgvlkopfx Admenk Pripravený na použitie

Stav: dobrý (použitý), 107 POUŽITÝCH VOZÍKOV pre dávkovacie zariadenia na žemle a bagety. - 13 vozíkov s dávkovacími zariadeniami: - 3 vozíky na zariadenia bez plátien (pásy) ROZMERY DÁVKOVACÍCH ZARIADENÍ: - šírka 83 cm, - dĺžka 71 cm, - šírka plátna 77 cm. ROZMERY VOZÍKA: - 90x72 cm, - výška 213 cm, Hnjdpfxsw A Rlpo Admjk - počet úrovní: 18 POZOR: Cena za celý komplet, t.j. 18 zariadení + vozík: 700 €. Zariadenie sa nachádza v našom sklade (36-068 Bachórz, Poľsko). Uvedená cena je bez DPH HOVORÍME PO ANGLICKY, NEMECKY, FRANCÚZSKY, RUSKY A UKRAJINSKY.

Stav: pripravené na použitie (použité), Rok výroby: 2021, K dispozícii je automatický skúšobný stroj Gise pre klince. Skúšobný postup: systém spracovania obrazu, kamerový systém: Keyence CV-X300F, priepustnosť: cca 60 klincov/min, presnosť detekcie: 98 %, rozmery stroja X/Y/Z: cca 1200mm/1000mm/1100mm, hmotnosť: cca 150kg, riadenie: Siemens S7-1500. Vrátane segmentového dopravníka. Dokumentácia k dispozícii. Obhliadka na mieste je možná. Hnodsyarqajpfx Admek

Stav: nový, Počet: 33 pozícií Hmotnosť: 52 kg Stav: nový Priemer otvoru: 28 mm Sada 1: 33-dielna, systém 28 mm, pozostáva z: Sverky: 4 x 280610.N Sverky: 2 x 280630.N Prizma: 2 x 280648.1.N Čap: 12 x 160511 Doraz: 4 x 280410.N Doraz: 4 x 280420.N Uholník: 2 x 160110.N Uholník: 2 x 280152.N Hodpjfh N Ekjfx Admonk Príslušenstvo – súprava: 1 x 283999 Cena nezahŕňa balenie a dopravu.

Stav: nový, Počet pozícií: 37 Priemer otvoru: 28 mm Stav: nový Hmotnosť: 29 kg Basic-Set 1, 37-dielny, systém 28 mm, pozostáva z: Prítlačné zvierky: 4x 280604 Kolíky: 8x 280511 Hodpsgazl Rsfx Admonk Dorazy: 6x 280420.N Uholníky: 2x 280110.G Závitové čapy: 8x 280543 Dorazy: 8x 160415 Príslušenstvo: 1x 163999 Cena bez obalov a dopravy.

Rok výroby: 2025, stav: nový, Výber NOVÝCH bezvzduchových striekacích zariadení Q-Tech QT550 – 220/240V – dostupné ako hromadná sada alebo na individuálny nákup. Hnedpfxjy Ambgj Admsk Využitie: vnútorné steny a stropy, vonkajšie steny a strechy. Prietok: 5,5 l/min. Maximálna veľkosť trysky: 0,031". Max. pracovný tlak: 227 bar/3 300 psi. Motor: 1 500 W DC. Kompletná výbava: striekacia pištoľ QTech Q345 Airless, trysky QTech Contractor 517 a 531, ochrana Contractor, hadica s textilným opletením 3/8" x 15 m, hadica s textilným opletením 1/4" x 1 m. Hmotnosť: 59 kg. Sériové číslo: 2025047001 (2025).

Rok výroby: 2018, stav: veľmi dobrý (použitý), Spoločnosť Metals Minerals Sp. z o. o. ponúka na predaj zariadenia 3VST 2000 P / INSON na ultrazvukové čistenie vstrekovacích a tlakových foriem, jadrových skriniek, vložiek a dielov. Kompletný systém ultrazvukového čistiaceho zariadenia pozostáva z: troch nádrží, odlučovača oleja, záchytnej vane, platformy so schodmi a koša s policami na čistenie drobných dielov a príslušenstva. Výrobcom zariadenia je spoločnosť FISA, popredný výrobca zariadení na ultrazvukové čistenie tlakových a vstrekovacích foriem, jadrových skriniek, vložiek a dielov. Zariadenie je možné po dohode obhliadnuť v meste Końskie. Hnjdpsirfb Nofx Admok

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Hnsdsfz Dubepfx Admok Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, 7-inch touch panel The large color touch panel makes parameter input even easier and more convenient. 5 programs with 50 steps each It is possible to program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Information about gas and oil consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate the consumption and cost of each firing process. USB storage Every firing process is logged, and the data can be transferred to a USB stick for analysis on a PC. Each file is automatically created for a single firing process, recording extreme temperatures and exact timing. Files are saved in *.csv (Excel spreadsheet) format. For all customers until the end of 2016, this feature is free of charge. At other companies, this can cost several thousand euros. Storage of the last 20 firing processes Is something wrong? Did too few items come out of the kiln? Now you can check the exact parameters of the firing process, such as duration or potential issues. New! Timer It is possible to set the start time, allowing the kiln to turn on automatically before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction system can be programmed to open a few minutes before the end of the firing process to vent smoke from the chamber. The smoke extractor can also be controlled via the touch panel. Hnsdpfx Asfz Apqsdmek Process duration timer Using the heating dynamics, the process duration is calculated and the end time of the firing process is displayed. Self-closing doors To open, simply pull the door. To close, just push—it will close automatically. Exhaust hood above the door (optional) To minimize hall heating caused by opening the door, an exhaust hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for customers purchasing a large kiln who wish to use only part of the kiln. The oven is equipped with a movable partition wall and dedicated control system. 2 in 1 (optional) It is possible to use both chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. Hnodpfx Aefz Dt Nsdmek - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. Hnjdpefz I D Dsfx Admjk All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Hedpfx Aefz I Ededmonk Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, 7-inch touch panel The large color touch panel makes parameter input even easier and more convenient. 5 programs with 50 steps each It is possible to program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Information about gas and oil consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate the consumption and cost of each firing process. USB storage Every firing process is logged, and the data can be transferred to a USB stick for analysis on a PC. Each file is automatically created for a single firing process, recording extreme temperatures and exact timing. Files are saved in *.csv (Excel spreadsheet) format. For all customers until the end of 2016, this feature is free of charge. At other companies, this can cost several thousand euros. Storage of the last 20 firing processes Is something wrong? Did too few items come out of the kiln? Now you can check the exact parameters of the firing process, such as duration or potential issues. New! Timer It is possible to set the start time, allowing the kiln to turn on automatically before the workday begins. Made by professionals for professionals Hodjfzkrnjpfx Admonk Automatic smoke extraction The smoke extraction system can be programmed to open a few minutes before the end of the firing process to vent smoke from the chamber. The smoke extractor can also be controlled via the touch panel. Process duration timer Using the heating dynamics, the process duration is calculated and the end time of the firing process is displayed. Self-closing doors To open, simply pull the door. To close, just push—it will close automatically. Exhaust hood above the door (optional) To minimize hall heating caused by opening the door, an exhaust hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for customers purchasing a large kiln who wish to use only part of the kiln. The oven is equipped with a movable partition wall and dedicated control system. 2 in 1 (optional) It is possible to use both chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Use of Photoelectric Sensors Hnjdpfoflmdwox Admsk The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. Hnedpjfz Nb Tofx Admsk In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Hodpfx Aefz U S Eodmonk Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, 7-inch touch panel The large color touch panel makes parameter input even easier and more convenient. 5 programs with 50 steps each It is possible to program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Information about gas and oil consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate the consumption and cost of each firing process. USB storage Every firing process is logged, and the data can be transferred to a USB stick for analysis on a PC. Each file is automatically created for a single firing process, recording extreme temperatures and exact timing. Files are saved in *.csv (Excel spreadsheet) format. For all customers until the end of 2016, this feature is free of charge. At other companies, this can cost several thousand euros. Storage of the last 20 firing processes Is something wrong? Did too few items come out of the kiln? Now you can check the exact parameters of the firing process, such as duration or potential issues. New! Timer It is possible to set the start time, allowing the kiln to turn on automatically before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction system can be programmed to open a few minutes before the end of the firing process to vent smoke from the chamber. The smoke extractor can also be controlled via the touch panel. Process duration timer Using the heating dynamics, the process duration is calculated and the end time of the firing process is displayed. Self-closing doors To open, simply pull the door. To close, just push—it will close automatically. Exhaust hood above the door (optional) To minimize hall heating caused by opening the door, an exhaust hood can be installed above the door to remove hot air. Partition wall (optional) Hnsdpfx Aefz U Tiodmjk The partition wall is suitable for customers purchasing a large kiln who wish to use only part of the kiln. The oven is equipped with a movable partition wall and dedicated control system. 2 in 1 (optional) It is possible to use both chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Stav: takmer ako nový (použitý), Rok výroby: 2010, Funkcionalita: plne funkčný, You are planning to expand your central drying system but do not want to accept the high costs of original manufacturers. We are pleased to offer you an economical and technically reliable solution for this. Your in-house electrical engineering allows you to flexibly connect the SIMAR conveying separators to any existing control system. To commission the units, all that is required is the control signal 'Start Conveying' (flap closed) – after that, the conveying process runs automatically. The equipment was exclusively operated in a cleanroom using PP material without glass fibers and is, accordingly, in very good condition. 22 conveyor separators by SIMAR – from a cleanroom production line near Karlsruhe. Features: - With machine hopper. - Some units equipped with shut-off valve for suction discharge and mixing slide. - All units made of stainless steel. If you wish to purchase a unit, the price is €785 each, including machine hopper, valves, magnets, and more! If you buy all 22 units, the total price is €11,500 including all accessories. The estimated original price is at least €35,000. This is definitely worth a look! Hnodpfxewub E Re Admek

Stav: použitý, Priemer koša: 410 mm Priemyselný umývací automat Emsa Rotatherm Mini na čistenie dielov a náradia od tuku, oleja, živice, vosku, farieb, triesok a mnohých ďalších nečistôt. Hjdpfsx Sx Ecox Admonk