Gannomat Univerzálna Rámová Vŕtačka Na Výrobu Schodov kúpiť použité (91 367)

Stav: použitý, Rok výroby: 2002, Grinding diameter: 450 mm Grinding length: 1,500 mm Centre height: 225 mm Control: FAGOR EQUIPMENT: - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - T6: Internal grinding attachment - T7: Internal grinding attachment - Spindle motor, water-cooled, 9.8 kW - Marposs tool measuring system - Active longitudinal positioning - Kel-Set - GAP sensor (contactless by ELASO) at T1 and T2, integrated in the control interface - GAP at T3/T4 via fluid sensor - Semi-automatic balancing by ELASO for T1/T2, integrated into the control interface - Tailstock hydraulic, with fine adjustment +/-150 μm - Dressing device on the lower table, workpiece spindle side - Dressing device on the lower table, tailstock side - Dressing device on the upper table - New, service-friendly and operator-friendly enclosure SPECIAL EQUIPMENT: Workpiece spindle headstock with direct drive Iajdpfxouxfu No Ac Nor *Strongly recommended for non-circular grinding *Workpiece weight (chucked): max. 75 kg *Workpiece weight (between centres): 150 kg *Water-cooled *MK5 combined with short taper mounting DIN 55026 *Oriented spindle stop *Fixed lower part B-axis with direct drive, centre height 225 mm *Extremely torsion-resistant *High positioning accuracy *Resolution: ° *Water-cooled MECHANICAL RETROFIT: - Complete overhaul according to Kellenberger measuring protocol - Newly painted Hydraulics unit new: - Improved temperature control (oil cooler) - Energy saving: only one pump, not running continuously - Pressure monitoring - Monitoring of water content in hydrostatic oil (Early detection of bellows damage) Hydrostatic leadscrew in X: - Wear-free due to no contact during operation - No loss of accuracy, even under continuous full load at max. speed - Frictionless at low speeds - No stick-slip effect at low speeds - Precisely transmits even the smallest rotational movements - No backlash in case of change in rotational direction - No fluctuation in friction torque due to ball circulation - Higher axial rigidity than ball screws - Significantly better damping, leading to improved surface finish and tool life - No vibrations from ball return - Suitable for high speeds and accelerations - Cost-effective alternative to linear motor, higher accuracy, significantly lower heat generation - Significantly lower power loss and no issues with chips sticking to permanent magnets - Much lower cooling capacity needed compared to linear motors ELECTRICAL RETROFIT: - New, modern CNC CYLINDRICAL GRINDING MACHINE controller with BEMA grinding interface - Completely new electrical cabinet - New drive technology - Replacement of all wiring, pressure switches, etc. - New absolute glass scales on X and Z axes - New absolute rotary encoder (for B-axis) CONTROL SYSTEM: The grinding software consists of a base license and various options available depending on the machine's configuration. Software base: - External and internal oscillation grinding - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed on wheel) - Semi-automatic oscillation grinding - Workpiece...

Stav: použitý, Grinding diameter: 250, 350, 450 mm Grinding length: 1,000 mm Centre height: 125, 175, 225 mm Iodpfxjd Ih D Hs Ac Noar Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1,500, 1,700, 2,200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ±8° Longitudinal table movement: 1,300 mm Table feed rate: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg incl. clamping Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Photo shows similar machine with 225 mm centre height Version R: Machine equipped with central lubrication and roller guideway in the X-axis flat guide, as well as air lift in the grinding headstock. - Digital display on 2 axes. X-axis resolution: 0.5 µm Options: - Rotary encoder with digital readout on workpiece headstock - Rotary encoder with digital readout on grinding headstock (height adjustment by spindle not possible) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height to max. 225 mm - Variable speed control for grinding spindle Includes: - Operating tools - Clamping sleeve for chuck Further accessories available on request. The machine tool currently does not meet the basic safety and protection requirements as specified in the German Industrial Safety Regulation (BetrSichV 2015). A risk assessment pursuant to BetrSichV is required to determine whether the minimum safety objectives can be increased accordingly.

Stav: použitý, Grinding diameter: 350 mm Grinding length: 1500 mm Centre height: 175 mm Machine weight approx. 3 t High-end Kellenberger 1500U Ideal for spindle manufacturers or spindle refurbishers - BEMA internal grinding attachment with separate, cooled motor Grinding spindle and internal grinding spindle motor electrically interlocked! Internal grinding spindle can only be switched on when in position A quantum leap in terms of safety Iaedpet Ii Rrsfx Ac Nsr - Infinitely variable grinding spindle speed: 1000-1500 rpm - Infinitely variable internal grinding spindle speed: 0-100% - Digital display of spindle speeds - Swivel angle indicator for upper table - Swivel angle indicator for grinding spindle headstock - Marposs contact sensor for external grinding only - Marposs fluid touch sensor for internal grinding - Centre height up to 250 mm possible Machine is already delivered. Identical machine can be built with additional options. The machine tool currently does not comply with the essential health and safety requirements as stipulated in the BetrSichV 2015 regulations. The achievement of the required minimum safety standards must be determined by means of a risk assessment in accordance with BetrSichV.

Stav: použitý, Grinding diameter 250, 350, 450 mm Grinding length 1000 mm Center height 125, 175, 225 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20–400 rpm Workpiece headstock swiveling 360° Grinding spindle head swiveling 180 + - ° Grinding spindle speed 1500, 1700, 2200 rpm Plunge (per stroke) 0.001–0.030 mm/Ø Continuous infeed 0–0.95 mm/Ø Table swiveling ±8° Table longitudinal travel 1300 mm Table speed 0.02–6 m/min Workpiece weight between centers 130 kg Workpiece weight max. (overhung) 130 kg incl. clamping equipment Internal spindle mount 70 mm Total power requirement 6.5 kW Machine weight approx. 2.5 t Space requirement approx. 4.2 x 2.0 m As the world's leading company in the field of Kellenberger overhaul/retrofit, we are not only able to deliver machines in as-new condition and with warranty, but can also provide service for your machines—recently delivered equipment supplemented with additional options such as: - Splash guard doors - X-axis enclosure - Grinding spindle head swivel angle indicator Available at a surcharge. Geometrically overhauled and newly painted with original electrics. The machine is equipped as standard with central lubrication and roller guide in the X-axis flat slideway as well as air lift-off in the grinding spindle head. - Digital display in 2 axes. X-axis resolution 0.5 μm Iajdpfx Asuxftxec Nsr Options: - Rotary encoder with digital display for the workpiece spindle head - Rotary encoder with digital display for the grinding spindle head (no height adjustment with spindle possible) - New heavy-duty internal grinding unit, diameter 80 mm or 100 mm, with height adjustment - Increase in center height to max. 225 mm - Variable speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Additional accessories on request. The machine tool does not currently meet the fundamental safety and protection requirements specified in BetrSichV 2015. Raising the required minimum protection level must be established by means of a risk assessment in accordance with BetrSichV.

Stav: použitý, Rok výroby: 1982, Grinding diameter 630 mm Grinding length 600 mm Centre height 320 mm Machine has been overhauled according to Kellenberger test protocol and freshly repainted. The susceptible Güttinger control system has been replaced by the modern BEMA X control system. This means the machine also received a completely new electrical system as part of the upgrade. Iaedpsvq R Uzjfx Ac Njr Machine equipped with reinforced workpiece spindle stock for plunge grinding of heavy workpieces. The machine does not currently comply with the essential safety and protection requirements as specified in the BetrSichV 2015. Raising the required minimum safety standard must be determined by a risk assessment in accordance with BetrSichV.

Stav: použitý, Rok výroby: 2002, Grinding diameter 250 mm Grinding length 400 mm Centre height 125 mm Control system Fanuc 21i-T Machine serviced and partially overhauled. -New grinding spindle bearings -New X-axis spindle -Upper table reground Iasdpfxevx Dvuo Ac Nor -New table geometry -New geometry from tailstock to grinding spindles B-axis with 1° Hirth coupling Longitudinal positioning HF internal grinding spindle GAP control Paper band filter

Stav: použitý, Grinding diameter: 350, 450 mm Grinding length: 600 mm Centre height: 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20-400 rpm Iodpfxjd Ih D Eo Ac Noar Workpiece headstock swivels: 360° Grinding head swivels: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001-0.030 mm/Ø Continuous infeed: 0-0.95 mm/Ø Table swivels: ±10° Table longitudinal travel: 900 mm Table speed: 0.02-6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (flying): 130 kg including chucking system Internal spindle bore: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Required space approx.: 3.1 x 2.0 m As a global leader in Kellenberger overhauls and retrofits, we are not only able to deliver machines in like-new condition with warranty, but also offer overhaul and repainting services for your machines in metric execution. Photo shows a previously delivered machine, possibly with different options. The machine is equipped as standard with central lubrication and roller guideways in the flat bed of the X-axis, as well as air lift-off in the grinding headstock. BEMA standard equipment includes: - Digital read-out in 2 axes. X-axis resolution: 0.5 µm - Spindle speed display for grinding spindle - Infinitely variable speed control for grinding spindle (70-100%) - Infinitely variable speed control for internal grinding spindle (70-100%) - Workpiece spindle drive by three-phase motor, continuously variable via frequency converter Optional extras (at additional cost): - Rotary encoder with digital display in workpiece headstock - Rotary encoder with digital display in grinding headstock (no height adjustment possible with spindle) - Sine bar - New robust internal grinding attachment (80 mm or 100 mm diameter), with height adjustment - Increase in centre height to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Of course, all of our completely refurbished machines come with a 12-month warranty (valid only in neighbouring countries). Further accessories available on request. Please note: At present, the machine tool does not meet the fundamental safety and protection requirements as described in the BetrSichV 2015. The increase of the required minimum safety standard must be determined by a risk assessment in accordance with BetrSichV.

Stav: použitý, Rok výroby: 1982, Brúsny priemer 630 mm Brúsna dĺžka 600 mm Výška hrotu 320 mm Stroj so zosilneným vretenníkom na obrobky na vyložené brúsenie ťažkých obrobkov. Stroj prechádza veľkou údržbou/čiastočnou generálnou opravou vrátane geometrického protokolu podľa smerníc pre nové stroje Kellenberger. Obrábací stroj v súčasnosti nespĺňa základné požiadavky na bezpečnosť a ochranu, ako je uvedené v BetrSichV 2015. Stanovenie požadovaného minimálneho cieľa ochrany sa určuje prostredníctvom posúdenia rizika podľa BetrSichV. Isdpfx Acsv Dxxzs Njar

Stav: použitý, Brúsny priemer 250, 350, 450 mm Brúsna dĺžka 1000 mm Výška hrotu 125, 175, 225 mm Priemer brúsneho kotúča 400 mm Šírka brúsneho kotúča 50 mm Otvor (upnutie kotúča) 127 mm Kužel vretien na obrobok MK5 Otáčky vretena na obrobok 20-400 min⁻¹ Vreteno na obrobok otočné 360° Brúsny vreteník otočný 180° ± Otáčky brúsneho vretena 1500, 1700, 2200 min⁻¹ Prísuv (prerušovaný) 0,001-0,030 mm/Ø Prísuv (spojitý) 0-0,95 mm/Ø Stôl otočný ±8° Pozdĺžny pohyb stola 1300 mm Rýchlosť stola 0,02-6 m/min Hmotnosť obrobku medzi hrotmi 130 kg Max. hmotnosť obrobku na konzolu 130 kg vrátane upnutia Vnútorný otvor vretena 70 mm Celkový príkon 6,5 kW Hmotnosť stroja cca 2,5 t Pôdorys cca 4,2 x 2,0 m Okamžite k dodaniu, samozrejme s 12-mesačnou zárukou! Geometricky repasovaný a novo lakovaný s novou elektroinštaláciou. V KELLENBERGER kvalite! - Digitálny odpočet v 2 osiach. Rozlíšenie os X 0,5 µm - Moderný vretenník na obrobok s kužeľom MK5 - Moderný koník s kužeľom MK3 - Moderná hydraulická jednotka Iajdpsv I Eq Sofx Ac Nor - Papierový pásový filter Ďalšie príslušenstvo na požiadanie Stroj v súčasnosti nespĺňa základné bezpečnostné a ochranné požiadavky uvedené v BetrSichV 2015. Určenie požadovaného minimálneho bezpečnostného cieľa je potrebné stanoviť posúdením rizík podľa BetrSichV.

Stav: použitý, Rok výroby: 2010, Brúsny priemer: 350 mm Brúsna dĺžka: 1000 mm Výška hrotu: 175 mm Riadenie: Fanuc 310is Kompletne mechanicky repasovaný. Vrátane brúsneho procesu a nastavenia na jeden kus. Originálna fotografia stroja z výstavy EMO 2010. CNC riadenie GE Fanuc 310is Ručný panel pre CNC riadenie GE Fanuc S Wenger podávačom Otočný diel s automatickým indexovaním po 1° Brúsna hlava UR 1-2-3 Brúsny kotúč vľavo 500 x 80 mm Iaedpfx Acevdk N Es Ner Brúsny kotúč vpravo 400 x 63 mm Prevádzková jednotka pre vysokofrekvenčné vnútorné brúsne vreteno MFV / MFZ Vysokofrekvenčné vnútorné brúsne vreteno MFN 1090 Chladenie cez vreteno obrobku Zariadenie na orovnanie na hornom stole Otočný držiak pre PKD diamantové platne Základný modul pre KEL-TOUCH snímač kontaktu nástroja a KEL-BALANCE vyvažovaciu jednotku KEL-TOUCH snímač pre univerzálne varianty brúsnej hlavy R / RS / UR / URS KEL-TOUCH na hlavnom vretene pre vnútorné a vonkajšie brúsenie Príprava pre meracie ústrojenstvá Movomatic ESZ 400 alebo Marposs P7 ME Príprava pre externý filter Vypínanie chladiva pre stolové zariadenia Plné opláštenie pre emulziu Odsávacie zariadenie na brúsny hmlový emulzia Servisná jednotka pre pneumatické prídavné funkcie Príprava pre nakladač portálu KEL-VITA KEL-POS, MOVOMATIC: Merací snímač C25 Hydraulická príprava pre lunetu Arobo

Stav: použitý, Rok výroby: 1995, Brúsiaci priemer 350 mm Brúsiaca dĺžka 1000 mm Výška stredov 175 mm Čiastočne repasovaný stroj s meracím protokolom podľa tolerancií nového stroja NOVÉ riadenie Eckelmann ENC s brusiacim softvérom BEMA Numericky riadená os B Vnútorná brúsna jednotka priemer 80 mm Brúsny kotúč vľavo priemer 400 mm Brúsny kotúč vpravo priemer 300 mm Ijdpfx Acoyatx Sj Near Vnútorné brúsne vreteno HJN 828 Hydraulická koníková podpera Mikronastavenie Merací systém KEL SET

Stav: použitý, Rok výroby: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m Photos show an identical machine with a centre height of 225 mm Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Isdpfx Asuxfucsc Nsar Grinding head UR with T1-T2-T3 Standard Equipment: - T1 500 mm grinding wheel diameter - T2 400 mm grinding wheel diameter - B-axis infinitely variable, high-resolution - Marposs measuring device for tool measurement - Active longitudinal positioning - GAP monitoring for T1 and T2 from ELASO, contactless, integrated in the control interface - Semi-automatic balancing from ELASO integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mounting DIN 55026 - Internal grinding device, belt-driven Options at extra charge: - New high-precision workpiece spindle head with torque drive - Internal grinding device for high-frequency spindles, diameter 120 mm - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm, with integrated GAP sensor (delivery time required) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic ballscrew on X-axis - New hydrostatic system with only one pump and accumulator for improved energy efficiency - Monitoring of the water content in the hydrostatic system - Extraction unit Other options available on request Mechanical Overhaul: - Complete overhaul of the machine according to Kellenberger measurement protocol - New, service-friendly machine enclosure - New paintwork Electrical Overhaul: - New, modern CNC CYLINDRICAL GRINDING MACHINE control system with BEMA cylindrical grinding interface - Newly built switch cabinet - New drive technology - Replacement of all electrical cables, pressure switches, etc. - New absolute glass scales on X and Z axes - New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a basic license and various options depending on the machine’s configuration. Software Basic - External and internal longitudinal grinding - External and internal plunge grinding - External and internal face longitudinal grinding - External and internal face plunge grinding - External and internal taper longitudinal grinding - External and internal radius grinding, radius dressed onto the wheel - Semi-automatic longitudinal grinding - Workpiece zero setting - Grinding wheel zero setting - Measurement of dressing diamonds - 2 form diamonds - 1 form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - 3 flat dressers - Corrections - Z-position measuring (probe required) - GAP measurement (pre-grinding device required) OPTIONS at extra charge: Software Profile Plunge Grinding: - External and internal profile plunge grinding with profile wheel Software Profile Grinding: - External and internal profile grinding with straight wheel Software Thread Grinding: - Single and multi-start external and internal thread grinding with thread dressed onto the wheel. Dressing of single and multi-groove wheels. Flank angle freely selectable. Software Trapezoidal Thread Grinding: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular longitudinal grinding Software Non-circular Grinding: For non-circular grinding, the workpiece axis must be equipped with a high-resolution encoder in order to operate the axis as a C-axis. The non-circula

Stav: použitý, Priemer brúsenia: 250, 350, 450 mm Dĺžka brúsenia: 1000 mm Výška hrotov: 125, 175, 225 mm Priemer brúsneho kotúča: 400 mm Šírka brúsneho kotúča: 50 mm Priemer upnutia (otvor): 127 mm Kužel vretena obrobku: MK5 Otáčky vretena obrobku: 20–400 ot./min Vreteník obrobku otočný: 360° Vreteník brúsneho vretena otočný: 180° ± Otáčky brúsneho vretena: 1500, 1700, 2200 ot./min Prísuv po zdvihu: 0,001–0,030 mm/Ø Priebežný prísuv: 0–0,95 mm/Ø Stôl otočný: ±8° Pozdĺžny pohyb stola: 1300 mm Rýchlosť stola: 0,02–6 m/min Hmotnosť obrobku medzi hrotmi: 130 kg Max. hmotnosť obrobku – letmo: 130 kg (vrátane upnutia) Vnútorný upínací priemer vretena: 70 mm Celkový príkon: 6,5 kW Hmotnosť stroja cca: 2,5 t Pôdorysný rozmer cca: 4,2 × 2,0 m Ako svetový líder v oblasti repasovania/modernizácie Kellenberger strojov zabezpečujeme nielen dodávky strojov v kvalite nových strojov so zárukou, ale aj servis pre Vaše zariadenia. Geometricky repasované a nanovo lakované s originálnou elektronikou. Fotografia znázorňuje typ 600U nedávno dodaný zákazníkovi. -Digitálny odpočet v 2 osiach. Rozlíšenie os x: 0,5 μm Možnosti: -Elektronický odčitávač otočiek vo vretene obrobku s digitálnym displejom -Elektronický odčitávač otočiek v brúsnom vretene s digitálnym displejom (nie je možná výšková regulácia cez vreteno) -Nové robustné vnútorné brúsne zariadenie s priemerom 80 mm alebo 100 mm s nastavením výšky -Zvýšenie výšky hrotov až na max. 225 mm -Regulácia otáčok brúsneho vretena Iajdst Ii Nuspfx Ac Nsr Vrátane: -Obslužné náradie -Upínacia trubica pre skľučovadlo Ďalšie príslušenstvo na požiadanie. Táto obrábacie stroj momentálne nespĺňa základné bezpečnostné a ochranné požiadavky podľa BetrSichV 2015. Splnenie požadovaných minimálnych cieľov ochrany je potrebné stanoviť prostredníctvom posúdenia rizika podľa BetrSichV.

Stav: použitý, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivel range: 360° Grinding headstock swivel range: 180 ±° Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed per stroke: 0–9.99 mm/Ø Continuous feed: 0–9.99 mm/Ø Table swivel: ±8° Longitudinal table travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Cross travel max.: 270 mm Max. workpiece weight (unsupported): 130 kg including clamping Internal spindle mount: 80 mm Tailstock quill taper: MT3 Quill stroke: 30 mm Power requirement: approx. 6.5 kW Machine weight: approx. 3.05 t Space required: approx. 4 x 2 m Overhauled according to Kellenberger guidelines, including a new, modern, and future-ready control system. Photo shows a previously delivered machine. - Operation via touch panel is extremely user-friendly. - The symbols on the control panel are practically identical to the original controls, so no retraining is necessary. - Diagnostic functions with PLC indications and digital I/O display. - Dressing functions can be expanded or modified to customer specifications. - Spindle orientation stop for the workpiece spindle available upon request. - New maximum infeed: 40 mm, expandable upon request. Iasdpfx Aeuxfupoc Ner - Digital readout on two axes. X-axis resolution: 0.5 μm. Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment possible with spindle) - New robust internal grinding device, diameter 80 mm or 100 mm - Increased centre height up to max. 225 mm - Variable speed control for grinding spindle Included: - Operating tools - Clamping sleeve for chuck Further accessories available on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic longitudinal and rapid traverse table feed. Versatile applications in production for external cylindrical and internal grinding or for external, face, and internal grinding in a single setup of individual parts. Available options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control Current safety compliance: The machine tool does not currently meet the fundamental safety and protective requirements as specified in the German Industrial Safety Regulation (BetrSichV 2015). The required minimum safety level must be determined by a risk assessment in accordance with BetrSichV.

Stav: použitý, Rok výroby: 2006, Brúsny priemer 350 mm Brúsna dĺžka 1000 mm Výška hrotov 175 mm Hmotnosť stroja cca 3,5 t Stroj kompletne generálne opravený v štýle BEMA s 12-mesačnou zárukou Mechanicky a vizuálne ako nový Fotografia novo dokončeného stroja s čiastočne inými možnosťami výbavy. Iodpfx Acst Ii Nbo Nsar Ovládanie Fanuc 21i -Brúsna hlava UR 1-2-3 vonkajšie/vnútorné/čelné brúsenie -B-os automaticky 1° Hirth ozubenie -Aktívne pozdĺžne polohovanie KEL-POS Movomatic -Polautomatické vyvažovacie zariadenie KEL-BALANCE -Pravé brúsne koleso s priemerom 400 mm -Ľavé brúsne koleso s priemerom 300 mm -Zariadenie na vnútorné brúsenie s remeňovým pohonom -Koník s mikro-nastavením -Jemné nastavenie horného stola -Pásový papierový filter SBP4 240 l

Stav: nový, Rok výroby: 2026, Number of spindles: 1 Max. drilling depth: 150 mm Motor power: 1.5 kW Götzinger System Hoffmann Frame and Slot Mortising Machine HF 150 E The alternative to the classic slot mortising machine The HF 150 E model offers beginners the opportunity to do more than just mortise slots. This model provides everything required for precise frame drilling – at an affordable price. Proven linear guides ensure vibration-free precision drilling. Drill feed is manual. The workpiece stop systems guarantee clear, user-oriented operation. Convincing advantages: - Universal in application – the use of the machine can be fully adapted to user requirements. Whether as a frame drilling machine for cross and corner joints, or used purely as a slot mortiser. The machine has a solution for every need. - Ergonomic and user-oriented – all adjustments, operation, and tool changes are performed exclusively from the operator side. Workpiece clamping is pneumatic via manual valves – no physical effort required as with mechanical lever clamping. - Precise work results – repeated accuracy of drilling patterns and positions is ensured via a precise 12 mm pitch setting. The drilling level is set manually using a digital display (0.1 mm increments). - Expandable and upgradable with special accessories for every requirement, e.g., longitudinal stop systems in various designs, adjustable side stop systems, line laser for scribe line drilling, mitre angles, quick-change drill head device for multiple spindle heads, and much more. Technical Data Drilling Unit ----- Height adjustment via digital indicator Manual height adjustment: 100 mm Drill stroke/depth: 150 mm (manual) Cross adjustment: 320 mm (incremental) Drilling pattern width: 12 mm pitch (standard) Three-phase motor: 230/400 V, 50 Hz, 2850 rpm, 1.5 kW Stop System ----- 2 side stops, swivelling in/out Tool Holder ----- Special drill chuck with 2 tool holders, 1 x M10, 1 diameter of your choice Ijdpeytx Uxofx Ac Njar Workpiece Clamping ----- Pneumatic via manual slide valve The machine is delivered ready for operation on a mobile base. (Technical data as per manufacturer’s information – subject to change!) Special accessories – see PDF attachment!

Stav: nový, Rok výroby: 2026, Number of spindles: 1 unit Maximum drilling depth: 150 mm Motor power: 1.8 kW Götzinger HR 150 - Hoffmann system This machine guarantees you the highest precision when drilling in two planes. Frame and slot mortising machine, enables drilling in two planes in a single clamping. - Well-designed, precise, and practical stop system - Exceptionally smooth and backlash-free indexing, feed, and cross adjustment - Guide systems for the highest demands - Special drill chuck – precise, smooth running - Drilling planes with digital display - Two lateral stops offer significant advantages, center stop available upon request - Continuous front stop with position markings Iasdpfxsytx T Io Ac Nsr - Drilling pattern freely selectable according to wood profile, in 12 mm grid; special grids available - Integrated dust extraction - Exchangeable additional devices (e.g., drill heads, miter stops, balustrade/railing device, side and drop-down stops) can be mounted and removed without tools. Technical Data: Drill Unit ----- Height adjustment in 2 planes via digital display Height adjustment 100 mm pneumatic Drilling stroke/depth 150 mm manual Cross adjustment 320 mm via indexing Drilling pattern width 12 mm pitch, standard Three-phase motor with 2 speeds, 230/400 V, 50 Hz, 1,420/2,840 rpm, 1.3–1.8 kW Tool Holder ----- Special drill chuck with 2 tool change inserts: 1 x M10, 1 x D 16 Stop System ----- 2 lateral stops, pivotable in/out 1 longitudinal stop (tube) with adjustable flip stop approx. 1,500 mm Slot mortising stop on left and right Workpiece Clamping ----- Pneumatic via foot pedal Dust Extraction Special accessories – see PDF attachment (Technical data according to manufacturer – subject to change without notice!)

Stav: použitý, Rok výroby: 1990, Brúsiaci priemer 360 mm Ijdpfoxbh Ebex Ac Near Brúsna dĺžka 1000 mm Výška hrotu 180 mm Hmotnosť obrobku medzi hrotmi max. 250 kg Stroj s veľmi malým počtom prevádzkových hodín po generálnej oprave v odbornom servise Karstens. Posuvové riadenie Jetter Digitálny ukazovateľ Zariadenie na vnútorné brúsenie Koník s jemným nastavením valcovitosti Hydraulický pinol koníka A pod. Rýchle nastavenie polohy brúsneho vretienka pomocou vzduchového vankúša

Stav: použitý, Rok výroby: 1986, Brúsiaci priemer 360 mm Iedpexyadmjfx Ac Near Brúsna dĺžka 3000 mm Výška stredov 180 mm Celková požiadavka na výkon 17 kW

Stav: nový, Rok výroby: 2026, Funkcionalita: plne funkčný, Naša spoločnosť sa zaoberá výrobou stolov na výrobu paliet. V ponuke máme niekoľko typov stolov, s pneumatickým ovládaním aj bez. Výhody našich stolov: - robustná a jednoduchá konštrukcia - možnosť výroby rôznych druhov paliet s rôznymi rozmermi - minimálna pracovná plocha stola: 800 mm x 600 mm Ijdpfx Acewn Irqj Near - maximálna pracovná plocha stola: 3300 mm x 1200 mm - balansery (vyvažovače) na podopretie klincovačiek - rýchly a jednoduchý spôsob prestavenia stola na iný rozmer palety - na obsluhu stola postačuje iba jedna osoba - nízka cena Možnosť zaslania stola kuriérom. Možnosť vyhotovenia stola na mieru podľa neštandardných rozmerov paliet.

Stav: použitý, Condition: NEW with pneumatic clamping device. The universally applicable assembly station for the production of wall, ceiling, and roof elements in timber frame construction. - Heavy-duty, base frame construction for a flat working surface. Iajdpfx Ajwv Tqboc Njr - Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. Cylinder stroke is 320 mm, clamping force per cylinder approx. 420 kg/4,200 N at 10 bar operating pressure. Clamping can be carried out in two groups (5 and 4 units), enabling two elements to be clamped/processed simultaneously. - Working surface can be covered with wooden panels as technically feasible. (As an option, a perforated sheet metal panel is available as shown in the photo.) - Stop system at the bottom with 9 plug-in bolts and laterally with 7 plug-in bolts for precision-sized elements. - Tilting mechanism of the assembly station using 3 hydraulic cylinders, suitable for element weights up to 4,000 kg at 85° (95°) tilt. The hydraulic system is compactly integrated within the frame area of the assembly station. - The electrical control cabinet is also securely installed beneath the assembly station. - Operation of the functions is via a control pendant. - At both ends of the station, a compressed air connection and socket are installed, and on each longitudinal side of the station, there are 2 sockets and 2 compressed air connections for connecting hand tools. - The stations are designed as modular units, allowing for immediate or later expansion with a receiver station to form a complete turning station. A turning station is shown in picture 3. - Additional options: Assembly table without tilting function, perforated sheet metal panels, other working dimensions upon request. Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Stroke of clamping cylinders: 320 mm - Height of stop/plug-in bolts: 120 mm - Working height: approx. 700 mm - Colour RAL 7035 light grey

Stav: použitý, Rok výroby: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workhead swiveling: 360° Grinding head swiveling: ±180° Grinding spindle speed: 1500, 1700, 2200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±8° Longitudinal table travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight – cantilevered: 130 kg incl. clamping Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Delivered new to university. Taken over in 2018. Then fully serviced by BEMA and delivered to a sole proprietorship. The machine will now be serviced again and the table geometry reconditioned. 2-axis Fagor digital readout retrofitted. - Tailstock with fine adjustment - Internal grinding attachment - Coolant system Iedpfx Aceynmpgs Nsar Accessories on request

Stav: použitý, Technické údaje: Brúsny priemer: 600 mm Iaedpfx Acjw Rktbs Nsr Brúsna dĺžka: 2600 mm Výška hrotov: 180 mm Priemer obrobku - max.: 360 mm Obežný priemer: 600 mm Priemer brúsneho kotúča: 600 x 305 x 160 mm Celkový potrebný výkon: 17,6 kW Zariadenie na chladenie: 90 l/min Otáčky vretene obrobku: 12,5-250 ot./min Posuv plynule: 0,05 - 6,0 mm Hmotnosť stroja cca: 8,2 t Rozmery stroja cca DxŠxV: 6,4 x 2,2 x 1,9 m Finibalanz vyvažovacie zariadenie Koník s digitálnou korekciou valcovej chyby X=0,001 - Z=0,01 Zariadenie na rádius 2-10 mm

Stav: dobrý (použitý), Funkcionalita: plne funkčný, vstupné napätie: 400 V, pracovná šírka: 800 mm, celková šírka: 1 400 mm, celková dĺžka: 800 mm, celková výška: 1 695 mm, Certifikované DGUV do: 04/2027, typ vstupného prúdu: trojfázový, celková hmotnosť: 1 000 kg, šírka dopravného pásu: 50 mm, Deliaca a tvarovacia stroj na cesto Kopfmaschine König Rex Classic Hmotnostný rozsah cca od 30 do 85 gramov s výstupným pásom Pripojenie 400V, zástrčka 16A-CEE Ijdox N Hgcspfx Ac Nsar Použitý stroj Navštívte náš veľký sklad pekárskych strojov!

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Priečna viacpíla na výrobu hranolov a sústružníckych polotovarov Isdpfx Aeych N Djc Near