Deckel Fp5 Cc/T kúpiť použité (76 265)

Stav: použitý, Rok výroby: 2003, x-travel: 780 mm y-travel: 560 mm z-travel: 560 mm Tool holder: SK40 Control: HEIDENHAIN iTNC 530 Machine weight approx.: 12.5 t Space requirement approx.: 3.40 x 3.30 x 2.60 m DECKEL MAHO DMC 60T Year 2003 Hodpjwm Rrwsfx An Iop Operating hours: 32,532.7 Working area Travel/ X-axis: 780 mm Y-axis: 560 mm Z-axis: 560 mm The machine DMC 60T (1659) is in very good condition and is ideally suited for precise milling operations thanks to its powerful motor spindles, high feed rates, and flexible tool magazine. All technical details are listed below. Work tables NC rotary table - clamping surface, pallet: diameter 500 x 630 mm Centering bore: diameter 50^H6, 20 mm deep Locating bore: diameter 20^H6, 20 mm deep Table top torque at: - 100% duty cycle: 1603 Nm - 25% duty cycle: 2813 Nm Max. table top speed: 30 rpm Feed: 7,200 mm/min Permissible table load: 400 kg Tool magazine With magazine: SK 40 Feed drive AC servo motors in digital technology for axes X, Y, Z Feed rates X, Y, Z axes infinitely programmable: 20–15,000 mm/min Rapid traverse X, Y, Z axes: 50 mm/min Setup mode X, Y, Z axes: 20–2,000 mm/min Position measurement system Resolution | X, Y, Z axes: 0.001 mm Input increment | X, Y, Z axes: 0.001 mm Position tolerance | X, Y, Z axes: 0.010 mm Main drive 12,000 rpm: Motor spindle without gearbox Main drive 18,000 rpm: Motor spindle without gearbox Spindle speed Infinitely programmable: 20–24,000 rpm In setup mode: 20–800 rpm Weight Machine with tool changer and transport base: approx. 10,100 kg Installation weight Machine with fixed table and tool changer: max. 11,500 kg Total weight incl. belt filter system: 12,400 kg Dimensions Machine: 3.40 x 3.30 x 2.60 m Chip conveyor: 2.77 x 1.00 x 2.07 m Belt filter unit 900 l: 2.22 x 1.40 x 2.20 m

Stav: veľmi dobrý (použitý), Rok výroby: 2002, Ovládanie 3 osí, aktívne riadenie dráhy Heidenhain TNC 123 Otáčky 40 - 2000 ot/min, geometricky odstupňovaná priamopohonom prevodovka so 16 stupňami pre maximálny krútiaci moment / frézovací výkon Posuv 5 až 500 mm/min, plynulo nastaviteľný Rýchloposuv 1,2 m/min Pinola: výsuvná pinola, vertikálny zdvih 60 mm, SK40, závit M16 na pritiahnutie Osi X/Y/Z: 300/160/340 mm Hedsyg I Nfjpfx An Iep Sklopný stôl 600 x 210 mm, max. zaťaženie 200 kg

Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, Universalna frézovačka Deckel FP3 s novým 3-osým FPS Aktiv digitálním odměřováním Heidenhain, generálně repasovaná společností FPS v roce 2015, v téměř novém stavu. Technické údaje: - Rok výroby: 1980, výrobní číslo: 2201-5045 - Pevný úhlový stůl - Otáčky: 25 – 2500 ot/min - Plynulé posuvy ve 3 osách - Rychloposuv ve 3 osách - Pohonný výkon: 2,0 / 4,0 kW - Vřetenová brzda - Pojezdy X/Y/Z: 500/300/400 mm - Svislá frézovací hlava na suportu posuvná o 200 mm - Výsuvná vertikální a horizontální pinola – SK40 - Upínací systém M16 - Hmotnost cca 1500 kg Příslušenství a vybavení: - 3-osé aktivní digitální odměřování Heidenhain (nejnovější provedení) - Zařízení na chlazení Hjdpfju Dm E Hjx An Iep - Centrální mazání O stroji: Nabízíme univerzální frézku Deckel FP3 v bezvadném, téměř novém stavu. V roce 2015 prošla generální opravou firmou FPS a od té doby byla jen málo používána. Stroj má minimální vůle na ručních kolech, všechny vřetena se pohybují hladce. U tohoto novějšího modelu FP3 lze posuv v osách plynule regulovat, stroj je také vybaven rychloposuvem ve všech osách. Velkou výhodou je aktivní 3-osé digitální odměřování. Pomocí Heidenhain odměřování můžete zadávat rozměry, na které stroj automaticky najede. Byl proveden výměna oleje. Stroj byl mechanicky i elektricky přezkoušen. Díky digitálnímu odměřování Heidenhain je práce snazší a přesnější. Využijte možnost si tento stroj pod napětím osobně prohlédnout a vyzkoušet. Stroj je ihned k dispozici.

Stav: pripravené na použitie (použité), K dispozícii je CNC 3-osé univerzálne frézovacie centrum Deckel (DMG Mori). Pohyb v osiach X/Y/Z: 1200mm/600mm/500mm, upínanie nástrojov: SK40, otáčky: 5000 ot/min, posuv: 10m/min, rýchloposuv: 10m/min, rozmery stola X/Y: cca 1600mm/675mm, max. zaťaženie stola: 2000kg. Rozmery stroja X/Y/Z: cca 3300mm/2400mm/2400mm, hmotnosť: cca 7000kg, riadenie: Grundig Dialog 11. Možnosť obhliadky na mieste. Hsdpfx Ansycwq Do Isp

Rok výroby: 1987, stav: pripravené na použitie (použité), Ponúka sa vertikálna frézka Deckel FP4NC s riadením Heidenhain TNC 355. Rok výroby: 1987, vrátane skrine na náradie a rôzneho náradia. Pojazdy X/Y/Z: 560mm/500mm/410mm, rozmery X/Y/Z: cca 1800mm/1600mm/2000mm, hmotnosť: cca 2400 kg. Obhliadka možná po dohode. Hedpfx Anoxyk Upe Ijp

Stav: pripravené na použitie (použité), Rok výroby: 1998, Rozsah otáčok vretena: 9000 ot./min., pojazdy X/Y/Z: 500mm/400mm/400mm, posuvová rýchlosť: 10000mm/min, rýchloposuv: 12m/min. Rozmery stola X/Y: 700mm/500mm, max. zaťaženie stola: 200kg, počet T-drážok: 7, rozstup T-drážok: 63mm. Ovládanie: Heidenhain, menič nástrojov: 16-násobný, rozmery X/Y/Z: 4000mm/2200mm/2450mm, hmotnosť: cca 3500kg. Hedpfxsw Tc Nys An Isp

Stav: dielensky repasované (použité), Rok výroby: 1989, Dear Sir or Madam, For sale is a partially overhauled Deckel FP1 with 3-axis Heidenhain TNC113 active control, renowned for its particularly user-friendly operation. This later model from 1989 is equipped, among other features, with central lubrication, an electric coolant pump, and a machine lamp. The machine has undergone a thorough partial overhaul in our workshop and is therefore in excellent condition, which you are welcome to inspect on site. Delivery time: on request Machine No.: 2102-xxxx Table: fixed angle table or swiveling rotary table Travel paths: X 300 mm / Y 160 mm / Z 340 mm Quill travel: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool holder: SK40 Feed: stepless 5–500 mm/min Hedpfx Aopy Eldjn Isp Rapid traverse: 1200 mm/min Features and accessories: 3-axis digital readout Heidenhain TNC113 with active control, stepless feed regulation in all 3 axes, coolant system, centralised lubrication, technical documentation, leveling feet, safety features (optional) Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly checked - All lubricants and, where necessary, worn parts are replaced in advance - Upon request, we will completely or partially overhaul your selected machine - Upon request, you can order additional accessories such as tools directly - Upon request, we can also mount further equipment such as safety devices directly - We are happy to take care of shipping and/or installation

Stav: takmer ako nový (použitý), Rok výroby: 1987, Funkcionalita: plne funkčný, Výbava: dokumentácia / manuál, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Active Digital Display and Infinitely Variable Feed – Near Mint Condition Technical Data: >> Year of manufacture: 1987 Machine no.: 2102-3536 >> Fixed angular table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical quill and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis Heidenhain TNC113 digital readout Hjdpfx Aju R D I Ssn Ijp >> Electric central lubrication >> Machine lamp >> Coolant device >> Operating instructions, spare parts list About the Machine: Offered here is a Deckel FP1 universal milling machine, year 1987, in near mint original condition. The machine has very little backlash and all spindles move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. On this later FP1 model, the feed is infinitely variable in three axes; it also features rapid traverse in these axes. A major advantage is the active 3-axis digital display. With this Heidenhain control, you can enter coordinates that the machine will automatically approach. The FP1 was located in a training facility where it was only occasionally used. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more precise. Take advantage of the opportunity to view and test this gem under power on site.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Výbava: dokumentácia / manuál, Universal Milling Machine Deckel FP1 with 3-axis active digital display Heidenhain TNC 111 2008 retrofit by FA Huttelmaier Very good condition Technical Data: >> Year of manufacture: 1985 Machine no. 2102-2891 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X / Y / Z: 300 / 160 / 340 mm >> Vertical milling head can be moved 100 mm on spindle carrier >> Vertical quill and horizontal quill – SK40 >> Drawbar S20x2 >> Weight: approx. 800 kg Equipment and accessories: Hodpeu Nvwvefx An Iep >> 3-axis digital display Heidenhain TNC 111 >> Coolant device >> Operating manual, spare parts list About the machine: For sale is a Deckel FP1 universal milling machine, year 1985, in very good condition. The FP1 was overhauled in 2008 by Huttelmaier. The machine has minimal play in the handwheels and all spindles move easily. Even at maximum speed, the milling machine runs very smoothly. On this newer FP1 model, the feed in all three axes is infinitely variable, and there is also rapid traverse in all axes. A major advantage is the active 3-axis digital display. This Heidenhain path control allows you to input dimensions, which the machine will approach automatically. The FP1 was located in a training workshop and only used occasionally. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to see and test this gem on site under power.

Stav: veľmi dobrý (použitý), Rok výroby: 1992, Funkcionalita: plne funkčný, Výbava: dokumentácia / manuál, F729 Universal Milling Machine Deckel FP1 with 3-Axis TNC 113 Heidenhain Digital Readout & Infinitely Variable Feed Very Good Condition Technical Specifications: >> Year of Manufacture: 1992 Machine No. 2102-6289 >> Fixed Angle Table (newly planed) >> Spindle Speed: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100 mm on spindle support >> Vertical and horizontal quill – ISO taper SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories & Equipment: >> 3-axis Heidenhain TNC113 digital readout >> Coolant system >> Operating manual, spare parts list About the machine: Offered here is a Deckel FP1 universal milling machine, year 1992, in very good condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. With this newer FP1 model, the feed can be infinitely varied on all three axes, with rapid traverse also available on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain position control, you can enter values for the machine to automatically position itself. The FP1 was located in a training facility, where it was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take advantage of the opportunity to inspect and test the machine under power on site. Hsdpfju T D Nrox An Iep

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Výbava: dokumentácia / manuál, Universal milling machine Deckel FP1 with 3-axis digital readout RSF 2006 Fully Refurbished TOP CONDITION Technical Data: >> Machine No. 53819/08 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW Hodovb Ud Ujpfx An Isp >> Travel X/Y/Z: 300/150/340 mm >> Vertical and horizontal quill - SK40 >> Spindle brake >> Drawbar system S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout by RSF Elektronik >> Coolant system >> Machine mounts About the Machine: Offered here is a universal milling machine Deckel FP1 in excellent condition. The Deckel shows minimal backlash and all feeds run smoothly. An oil change has been performed. The FP1 was completely overhauled by Huttelmaier in 2006 and has seen only minimal use since then. The RSF digital readout makes operation easier and even more precise. Take advantage of the opportunity to inspect and test the machine under power on-site.

Stav: veľmi dobrý (použitý), Rok výroby: 1984, Funkcionalita: plne funkčný, Výbava: dokumentácia / manuál, Univerzálna frézka Deckel FP1 s aktívnym 3-osovým digitálnym odpočtom Heidenhain TNC 113 a plynulým posuvom – vynikajúci stav Technické údaje: Hedpfx Aju Racren Isp >> Rok výroby: 1984, výrobné číslo: 2102-2601 >> Otočný/naklápací/stolček >> Otáčky: 40 – 2000 ot./min >> Plynulý posuv v 3 osiach >> Rýchloposuv v 3 osiach >> Výkon pohonu: 1,5 / 1,9 kW >> Vretenová brzda >> Pojezdy X/Y/Z: 300/160/340 mm >> Zvislá frézovacia hlava posuvná na konzole o 100 mm >> Vertikálne a horizontálne vreteno – SK40 >> Upínací systém S20x2 >> Hmotnosť cca 800 kg Príslušenstvo a vybavenie: >> 3-osový digitálny odpočet Heidenhain TNC113 >> Chladiace zariadenie >> Prevádzkový návod, zoznam náhradných dielov O stroji: Ponúka sa univerzálna frézka Deckel FP1, rok výroby 1984, vo výbornom stave. Stroj má minimálne vôle na kľukách a všetky vretená sa pohybujú ľahko. Aj pri maximálnych otáčkach beží frézka veľmi ticho. Pri tomto novšom modeli FP1 je posuv v troch osiach plynulo nastaviteľný, stroj má zároveň rýchloposuv v týchto osiach. Veľkou výhodou je aktívny 3-osový digitálny odpočet. S týmto Heidenhain systémom môžete zadať rozmery, ktoré stroj automaticky nastaví. Táto FP1 bola v školiacej dielni, kde bola využívaná iba príležitostne. Bol vykonaný servis – výmena oleja. Stroj je mechanicky aj elektricky skontrolovaný. Digitálne odpočty Heidenhain značne zjednodušujú a spresňujú prácu. Využite možnosť prezrieť a vyskúšať stroj osobne pod napätím priamo na mieste.

Stav: veľmi dobrý (použitý), Rok výroby: 1983, Funkcionalita: plne funkčný, Universal milling machine Deckel FP1 with 3-axis digital readout K&C (new) and stepless feed on all 3 axes – EXCELLENT CONDITION Technical data: >> Year of manufacture: 1983 Machine no.: 2102-2444 >> Rigid angle table >> Spindle speed: 40 – 2000 rpm >> Stepless feed in 3 axes >> Rapid traverse in all 3 axes >> Motor power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300 / 160 / 340 mm >> Vertical milling head adjustable 100 mm on spindle carrier >> Vertical and horizontal quill – SK40 >> Drawbar thread: S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout K+C, newly installed with manufacturer's warranty and operating manual. Functions include: setting reference points, zero points, input of coordinates, mm/inch toggle, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. Hodpfx Anstwlwzo Isp >> Coolant system >> Operating manual, spare parts diagram About the machine: Offered is a Deckel FP1 universal milling machine, year 1983, in exceptionally good condition. The machine has minimal play in the handwheels and all slides move smoothly. Even at maximum speeds, the milling machine runs quietly. On this newer FP1 model, feed in all three axes is stepless and rapid traverse is also provided in these axes. The FP1 was located in a training workshop and was used only occasionally. An oil change has been carried out. Mechanically and electrically tested. The brand-new K&C digital readout makes operation easier and more precise. Take this opportunity to view and test this outstanding machine under power on site.

Stav: veľmi dobrý (použitý), Rok výroby: 1992, Funkcionalita: plne funkčný, Universal milling machine Deckel FP4M with 3-axis Heidenhain active digital readout, excellent condition, CE compliant! Technical Data: >> Year of manufacture: 1992, Machine no.: 2203-8449 >> Fixed angular table >> Spindle speed: 50 – 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake Hsdju Tuk Hepfx An Iop >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head adjustable on spindle carrier >> Vertical and horizontal quill – SK40 taper >> Vertical quill extendable by 90 mm >> Hydraulic drawbar system >> Weight approx. 1,600 kg Accessories and Equipment: >> 3-axis active Heidenhain digital readout >> Coolant device >> Swarf tray >> Central electric lubrication >> Operating manual, spare parts diagrams About the Machine: Offered here is a Deckel FP4M universal milling machine, Active variant, in very good condition. The machine exhibits minimal backlash, and all axes can be moved smoothly. Even at maximum spindle speed, the milling machine runs smoothly and quietly. The machine features hydraulic clamping. The FP4M was only occasionally used for training purposes in a government facility. This newer FP4 model offers infinitely variable feed in all three axes, plus rapid traverse for each axis. A major advantage is the 3-axis Heidenhain digital readout. With this Heidenhain position control, you can enter dimensions and the machine will automatically move to those positions. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the machine under power at our premises.

Stav: veľmi dobrý (použitý), Rok výroby: 1978, Funkcionalita: plne funkčný, Universal milling machine Deckel FP1 with 3-axis K&C digital display, stepless feed in light grey, excellent condition Technical data: >> Year of manufacture: 1978, Machine no. 2101-0465 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Stepless feed on 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Rapid traverse >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be shifted 100 mm on spindle carrier >> Vertical quill and horizontal quill - ISO 40 taper >> Drawbar system S20x2 >> Weight approx. 700 kg Accessories and equipment: >> 3-axis digital display K&C, newly installed with manufacturer’s warranty and operating manual. Display unit: Set reference points and zero points, enter coordinates, mm/inch switch, absolute and incremental coordinates, circular functions, hole array, radius milling functions, etc. Hjdot Aav Ispfx An Iep >> Coolant system About the machine: A Deckel FP1 universal milling machine in very good condition is being offered. The machine has very little play in the cranks and all spindles move smoothly. All bellows are new. On this newer FP1 model, the feed is steplessly adjustable in two axes; the machine also has rapid traverse. An oil change has been performed. Mechanically and electrically tested. The new K&C digital display makes working easier and more precise. Take the opportunity to view and test this machine under power on site.

Stav: veľmi dobrý (použitý), Rok výroby: 1978, Funkcionalita: plne funkčný, Universal milling machine Deckel FP2 with 3-axis Heidenhain digital readout, stepless feed, in very good condition Technical data: >> Year of manufacture: 1978, Machine No. 2202-10163 >> Fixed angle table >> Spindle speed: 25 – 2500 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 3.0 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head adjustable on spindle carrier by 150 mm Hedexghtvopfx An Iop >> Extendable vertical and horizontal quill – SK40 taper >> Drawbar system S20x2 >> Weight approx. 1400 kg Accessories and features: >> 3-axis Heidenhain digital readout >> Coolant system >> Central mechanical lubrication system About the machine: Offered here is a Deckel FP2 universal milling machine in very good condition. The FP2 has very little backlash and all lead screws move smoothly. Even at maximum speeds, the milling machine runs quietly. On this newer FP2 model, the feed is steplessly adjustable in three axes, and each axis also features a rapid traverse. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes working easier and even more precise. Take advantage of the opportunity to view and test the machine under power on site.

Stav: použitý, Rok výroby: 1999, X-pojazd 500 mm Y-pojazd 400 mm Z-pojazd 400 mm Ovládanie Heidenhain Hedpfxey Aa Nkj An Ijp Hmotnosť stroja cca 3200 kg ISO40

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, pojazdová vzdialenosť osi X: 500 mm, zdvih osi Y: 400 mm, zdvih osi Z: 400 mm, maximálna rýchlosť vretena: 2 500 ot./min, otáčky vretena (min.): 50 ot./min, ťah perom: 90 mm, Dear Sir or Madam, We are pleased to offer you a very well-maintained milling machine, model Deckel FP4M (K) aktiv, featuring a rotary-tilt-swivel table and 4-axis digital readout. Thanks to its comprehensive equipment, this model is a true highlight among conventional machine tools. The machine has been thoroughly inspected in our workshop, is in excellent condition, and is immediately available for operation. We look forward to your inquiry! Delivery time: Immediately available Machine No.: xxxx-xxxx Year of manufacture: xxxx Table configuration: Rotary-tilt-swivel table Spindle speed: 50 - 2,500 rpm Feed rate: 8 - 630 mm/min, stepless Rapid traverse: 1,300 mm/min Drive power: 3.7 kW / 4.4 kW Rapid traverse: 1,300 mm/min Hjdevvtlgopfx An Iop Travel (X/Y/Z): 500/400/400 mm Tool holder: ISO 40 (SK40) Drawbar system: Hydraulic Vertical quill stroke: 90 mm Weight: approx. 1,600 kg Further features and accessories include, among others: Heidenhain 4-axis digital readout, 3-axis active control, hydraulic tool clamping, rotary-tilt-swivel table, coolant system, leveling feet, operating manual, and much more on request.... Our service promise to you: - We are a certified master craftsman’s business in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can fully or partially overhaul your chosen machine - You can freely choose the paint color of the selected machine - Upon request, you can order additional accessories such as tools etc. directly - Upon request, we can install additional accessories for you, such as safety devices - We are happy to handle shipping and/or installation for you

Stav: dielensky repasované (použité), Funkcionalita: plne funkčný, pojazdová vzdialenosť osi X: 500 mm, zdvih osi Y: 400 mm, zdvih osi Z: 400 mm, ťah perom: 90 mm, maximálna rýchlosť vretena: 2 500 ot./min, otáčky vretena (min.): 50 ot./min, Výbava: dokumentácia / manuál, Dear Sir or Madam, We are pleased to offer you a partially overhauled milling machine of the type Deckel FP4M (K) active. Thanks to its extensive features, this model is truly a highlight among conventional machine tools. The Deckel FP4MK has undergone a thorough partial overhaul in our workshop, putting it in absolutely top condition—technically, visually, and geometrically, it is virtually indistinguishable from a new machine. We look forward to receiving your inquiry! Delivery time: on request Spindle speed: 50 - 2500 rpm Feed rate: 8 - 630 mm/min, infinitely variable Rapid traverse: 1300 mm/min Drive power: 3.7 kW / 4.4 kW Travels X/Y/Z: 500/400/400 mm Tool holder: SK40 Clamping system: hydraulic Vertical quill travel: 90 mm Weight: approx. 1600 kg Table versions: Fixed angle table or rotary-swivel-tilt table Further equipment and accessories: incl. 3-axis Heidenhain digital readout with active control, hydraulic tool clamping, coolant system, machine leveling pads, technical documentation, and much more upon request. Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced in advance - On request, we can completely or partially overhaul the machine of your choice - You are free to choose the paint color of your machine Hsdjx Irwdopfx An Iop - If desired, you can order additional accessories such as tools together with the machine - Upon request, we can install further accessories such as safety equipment - We are happy to handle shipping and/or on-site installation for you

Stav: veľmi dobrý (použitý), Rok výroby: 2014, Funkcionalita: plne funkčný, výrobca ovládačov: Mitsubishi, Výbava: dokumentácia / manuál, dopravník triesok, llalalalalaaaa Hodowg Dabspfx An Iep

Stav: takmer ako nový (použitý), Rok výroby: 2013, prevádzkové hodiny: 39 945 h, Funkcionalita: plne funkčný, pojazdová vzdialenosť osi X: 450 mm, zdvih osi Y: 580 mm, zdvih osi Z: 400 mm, výrobca ovládačov: Heidenhain iTNC 530, celková výška: 2 900 mm, celková dĺžka: 5 500 mm, celková šírka: 2 650 mm, otáčky vretena (min.): 28 000 ot./min, prívod chladiacej kvapaliny: 40 lišta, Year of manufacture: 2013 CNC control: Heidenhain iTNC 530 Axes Travel X-axis mm: 450 Travel Y-axis mm: 580 Travel Z-axis mm: 400 C-axis indexing degrees: 360º (0.0001) A-axis indexing degrees: +10 / -110º Feed rates m/min: 80 Rapid traverse m/min: 80 Axis acceleration m/s²: 13 NC milling/rotary table: Number of pallets: System 3R (21 pallets type GPS 240, 30 pallets type GPS 120, and 24 pallets type ITS50) Pallet dimensions mm: Base plate for root pallet Max. workpiece size (D x H) mm: for pallet GPS 240 (275x275x200mm); for pallet GPS 120 (150x150x200mm); and for pallet ITS50 (ø70x200mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Max. spindle speed rpm: 28,000 Spindle drive power kW: 35/25 (40%ED/cont) Cooling Coolant supply through the spindle bar: 40 Tank capacity liters: 600 Tool System Tool holder: HSK-A 63 Number of tools in magazine: 120 Hjdpoxv Av Rofx An Isp Tool changer type: Double gripper Equipment Electronic handwheel Chip conveyor Infrared probe Internal coolant supply Rotating viewing windows Rinse gun Selectable air blast through spindle center via M-function Laser tool measurement for tool length and diameter 3D quickSET Preparation for external pallet transfer Precision package Internal coolant supply Electrical cabinet active cooling unit Spindle active cooling unit Tool holders not included in delivery Tools not included in delivery Paper band filter Machine operating hours: Power-on hours: 62,983 Spindle running time: 39,945 Total power requirement kVA: 55 Basic machine: dimensions/weight Length mm: 5,500 Width mm: 2,650 Height mm: 2,900 Weight kg: 9,500 + system 3R

Rok výroby: 2004, stav: pripravené na použitie (použité), Funkcionalita: plne funkčný, číslo stroja/vozidla: 1143 000084 3, TECHNICKÉ PODROBNOSTI Pohyb osy X: 780 mm Pohyb osy Y: 560 mm Pohyb osy Z: 560 mm Pohyb osy B: +30° až -120° Pohyb osy C: 360° plynule Ovládání: Heidenhain iTNC 530 Rozsah otáček vřetena: 0 – 12 000 ot./min Hodpsmiilbsfx An Iop Upínání nástroje: ISO SK 40

Stav: veľmi dobrý (použitý), Nástrojová frézka DECKEL FP 1, trojosý aktívny digitálny systém TNC 113 ez vzdelávacej inštitúcie -CE označenie -Pojazdy X / Y / Z: 300x160x340 mm -Heidenhain TNC 113 / zasúvacie riadenie Hjdpsyln Irsfx An Iop -Rozsah otáčok: 40 - 2000 ot./min -Plynulý posuv vo všetkých troch osiach -Rýchloposuv vo všetkých troch osiach -Vertikálna hlava posuvná o 100 mm -Vertikálne - horizontálne frézovacie zariadenie -Držiak nástrojov ISO 40 -Výkon pohonu 1,5 / 1,9 kW -Pevný uhlový stôl -Vanička na triesky -Chladiace zariadenie -Pracovné svetlo -Dokumentácia Rozmery: DxŠxV 1,3x1,2x1,7 metra / Hmotnosť: 950 kg Možné chyby a omyly sú vyhradené

Stav: použitý, Rok výroby: 2004, Funkcionalita: plne funkčný, pojazdová vzdialenosť osi X: 780 mm, zdvih osi Y: 560 mm, zdvih osi Z: 560 mm, rýchloposuv os X: 50 000 m/min, rýchly posuv osi Y: 50 000 m/min, rýchloposuv osi Z: 50 000 m/min, výrobca ovládačov: HEIDENHAIN, model regulátora: iTNC-530, počet pozícií v zásobníku nástrojov: 60, dĺžka nástroja: 315 mm, priemer nástroja: 160 mm, Výbava: dopravník triesok, Deckel Maho DMC-60T – 5-Axis Vertical Machining Centre The Deckel Maho DMC-60T is a high-precision 5-axis vertical machining centre, year of manufacture 2004, equipped with a Heidenhain iTNC-530 CNC control. The machine is ideal for complex and high-speed machining operations thanks to its ISO 40 taper spindle, maximum speed of 18,000 rpm and motor power of 19/28 kW (continuous/30 min). Main features: Axis travel: X = 780 mm, Y = 560 mm, Z = 560 mm Hsdpfxjwt N Tye An Iop Rotary axes: A = ±150° (head), B = 360° (table), continuous rotation with minimum increment of 0.001° Table: 630 x 500 mm, maximum load capacity 500 kg Rapid traverse: up to 50,000 mm/min Tool magazine: 60 stations, SK40 DIN-69871 tools, max Ø 80/160 mm, max length 315 mm, max weight 8 kg Additional equipment: Workpiece touch probe, chip conveyor, coolant tank with pumps, high-pressure through-spindle coolant pump, spindle chiller, transformer, manuals and CE documentation. Machine dimensions and weight: L 5,100 mm × W 5,000 mm × H 2,500 mm – Weight: 11,000 kg

Stav: dobrý (použitý), Upínací stůl, upínací úhelník, T-drážkový stůl, otočný stůl, stůl pro frézku - Rozměr stolu: 210 x 570 mm - T drážky: 3 - Otočný a naklápěcí - Vhodné pro Deckel, Mikron, WMW a další frézky - Hmotnost: 95 kg Hsdpfx Ansb A Iccs Isp