Miwe Co 1.0806 kúpiť použité (29 986)

Stav: takmer ako nový (použitý), Elektrická pec 4 poschodia a kvasná komora Nerezová oceľ Jednoduché čistenie Rozmery plechu: 80 x 60 cm Napätie: 400 / 230V / 50Hz / 3/N/PE Výkon jednej etáže: 5,9 kW Hedpfoxulhmsx Aa Uel

Stav: dobrý (použitý), Funkcionalita: plne funkčný, vstupné napätie: 400 V, vstupná frekvencia: 5 Hz, typ vstupného prúdu: trojfázový, číslo stroja/vozidla: 73185, Viacposchodová elektrická pec Miwe Condo Model: Typ: CO.3.1208 AS ovládanie Spodný a horný ohrev nastaviteľný samostatne 3 pečiace poschodia 1200 x 800 3 pece s parou Podstavec pojazdný so zámkom Pripojenie 400V, 3 x 16A CEE zástrčka Prívod vody 3/4 palca, odtok vody DN 40 Rozmery: 1500 x 1300 x 1950 mm, ŠxHxV Použitá pec Hedpfxjxduxae Aa Uel Navštívte náš veľký sklad pekárenských strojov!

Stav: dobrý (použitý), Funkcionalita: plne funkčný, celková dĺžka: 1 300 mm, celková šírka: 1 500 mm, celková výška: 1 950 mm, vstupné napätie: 400 V, vstupná frekvencia: 50 Hz, typ vstupného prúdu: trojfázový, Poschodová elektrická pec Miwe Condo Model: Typ: CO.5.1208 Riadenie AS Spodné a vrchné vyhrievanie nastaviteľné samostatne 5 pečiacich úrovní 1200 x 800 Pojazdný podvozok so zarážkou Hsdpfx Aasv N Tkce Usl Prípojka 400 V, zástrčka 5 x 16A-CEE Rozmery: 1500 x 1300 x 1950 mm, ŠxHxV Použitá pec Navštívte našu veľkú výstavu!

Stav: takmer ako nový (použitý), Pec na pečenie s 4 poschodiami a kysiarňou Výrobca: Miwe Model: Condo CO 4.0806 2D S 4 policami s rozmermi 80x60 cm Max. teplota: 320°C Výška vstupu police: 13 cm S kysiarňou S odsávacím krytom a kondenzačným zariadením na paru Rok výroby: 2013 Výkon: 18,9 kW Hodpfxjxulhye Aa Uol Napätie: 400V / 50Hz Vonkajšie rozmery: 110x115x210 cm

Stav: použitý, Pekárska pec S tromi etážami a podstavcom Výrobca: Miwe Model: CO 3 Vonkajšie rozmery: 150 x 130 x 140 cm Vnútorné rozmery: 120 x 80 cm Kapacita: 3 x 4 plechy (60 x 40 cm) Hodpeur Ixpefx Aa Uel

Stav: generálne opravený (použitý), Funkcionalita: plne funkčný, Použitá cukrárenská pec Miwe Condo CO 4.1208, repasovaná, 4 etáže, s digestorom a pečiacim priestorom, etáže 120 x 80 cm, elektrická, vymenené 4 magnetické ventily, 4 pohony, vymenený parný valec pečiaceho priestoru, vyčistený zvlhčovač, výrobné číslo 703 774, 33,8 kW, 400/230 V, 50 Hz Hodpfxexwp Nts Aa Ujl

Stav: dobrý (použitý), Použitá cukrárska pec Miwe Condo CO 4.120/120, repasovaná, 4 poschodia, s digestorom a pekáčom, pečiace plochy 120 x 120 cm, elektrická, 4 magnetické vetracie otvory, výška pečiaceho priestoru 20 cm, 47,2 kW, 400/230 V. Hjdpfx Aaoy E Hrwe Usl

Stav: takmer ako nový (použitý), Miwe Econo: Elektrický 400 V, rok výroby: 2022, spotreba: 16,1 kW, pre plechy 60x40 cm, pre 10 plechov, s digestorom, pekárenský priestor a parný kondenzátor, vo veľmi dobrom elektrickom stave. Hedpfxey Avpgj Aa Ujl

Rok výroby: 2003, stav: dobrý (použitý), 297 POUŽITÁ PEC MIWE BACKCOMBI. Pec sa skladá z: - konvekčnej pece AERO (s ventilátorom) na 4 plechy: 60x40, - poschodovej pece CONDO, rozmery komory: 60x40 (dvojkomorová), - kysiarne na 8 plechov: 60x40. VONKAJŠIE ROZMERY (v cm): - šírka: 90, - výška: 222 - dĺžka: 104. TECHNICKÉ ÚDAJE: - rok výroby: 2003. Hedpfxeyg H A Do Aa Uel Možné platené služby: repas / doprava. Uvedená cena je bez DPH. HOVORÍME PO ANGLICKY, NEMECKY, FRANCÚZSKY, RUSKY, UKRAJINSKY.

Stav: dobrý (použitý), 228 POUŽÍVANÁ Pec Miwe Condo, cukrárenská, elektrická, trojposchodová. TECHNICKÉ ÚDAJE: - rozmery pečiacej komory: 60x80. VYBAVENIE: - zaparovanie komory, - kysiareň so zaparovaním, - digestor, - pec na kolieskach. Hodpfoxznx Ijx Aa Ujl Zariadenie pripravené na obhliadku sa nachádza v našom sklade (36-068 Bachórz, Poľsko). Dostupné platené možnosti: renovácia / doprava / montáž / uvedenie do prevádzky. Uvedená cena je bez DPH za jednu pec. HOVORÍME PO ANGLICKY, NEMECKY, FRANCÚZSKY, RUSKY, UKRAJINSKY.

Rok výroby: 2009, stav: použitý, Funkcionalita: plne funkčný, Spoľahlivá MIWE EC6.0604 pekárenská pec – použitá, ale vo vynikajúcom stave! Hsdev Hzn Rjpfx Aa Usl Na predaj je dobre udržiavaná použitá pec MIWE ECONO typ EC6.0604 s podstavcom, naparovaním a odsávaním pary, rok výroby 2009. Technické údaje: • Spotreba energie: 9,5 kW • Napätie: 400-230 V, 3/N/PE • Frekvencia: 50 Hz Ideálne pre vysoký výkon a náročné pekárenské prevádzky Aj keď ide o použitú pec, bola vždy pravidelne servisovaná a je vo vynikajúcom technickom stave. Je ihneď pripravená na použitie a vhodná na široký sortiment pekárenských výrobkov. Osobný odber alebo zaslanie je možné* Predaj bez akejkoľvek záruky

Stav: dobrý (použitý), Rok výroby: 2015,

Stav: veľmi dobrý (použitý), 370 POUŽÍVANÝCH pecí Miwe Ideal Thermoespress + nakladací a vykladací systém Athlet. Zariadenia sú funkčné. VYBAVENIE: - 2 etážové pece, každá s plochou 29 m2 (spolu 58 m2), - nakladací/vykladací systém Athlet, - vykurovací kotol, - dokumentácia. Zariadenie pripravené na prehliadku sa nachádza v našom sklade (36-068 Bachórz, Poľsko). Dostupné platené možnosti: doprava. Hodpfx Asy Egynsa Uol Uvedená cena je netto za súpravu. HOVORÍME PO ANGLICKY, NEMECKY, FRANCÚZSKY, RUSKY, UKRAJINSKY.

Stav: veľmi dobrý (použitý), Rok výroby: 2015, prevádzkové hodiny: 20 331 h, Funkcionalita: plne funkčný, lisovacia sila: 100 t, šírka plniaceho otvoru: 970 mm, dĺžka plniaceho otvoru: 1 800 mm, dĺžka balíka: 1 200 mm, šírka balíka: 1 100 mm, výška balíka: 750 mm, hmotnosť balíka: 750 kg, celková hmotnosť: 33 000 kg, Good day, We hereby offer you, without obligation, a used, complete baling press line, consisting of the baler from manufacturer HSM, type VK 8818 R-FU, including conveying technology and wire tying stations. The following technical data have been taken from the manufacturer's operating manual and brochures, for which we cannot guarantee the correctness or completeness. Technical data baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Hsdpfeyz Af Ejx Aa Uol Number of bales pressed: 29,020 bales (as of September 2025) Pressing force main press: 1,000 kN Specific pressing force: 120 N/cm² Shear edge pusher force: 121 kN Feed chute dimensions: 970 x 1,800 mm Theoretical cycle time at idle: 8.3 seconds Theoretical throughput capacity: 643 m³/hour Bale dimensions: 1,100 x 750 mm, variable length 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency controlled Connected load: 110 kW Total current consumption: 213 A Main fuse: 250 A slow blow Tying system: 5-fold horizontal, fully automatic Throughput at bulk density: 20 kg/cbm: 12.86 t/hour 50 kg/cbm: 32.15 t/hour Bale weight at a bale length of approx. 1.2 m: 650 up to 750 kg/bale, depending on material Hydraulic oil tank volume: 2,000 L HVI 46 PLC: Siemens S7-300 Control panel: Siemens TP 700 Press dimensions (set up): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions press with conveying technology: 35,000 x 8,480 x 7,745 mm (L x W x H) Weight of press: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additionally ordered special equipment: Frequency-controlled main drive, 2 x 45 kW, providing up to 40% energy savings versus standard motorization 2 x 45 kW, with equal performance yield Manual activation or deactivation of the number of wire ties, to save tying wire for non-expansive material Shear edge pusher with 121 kN pressing force Sensor-based wire monitoring, with automatic press shutdown in case of wire break or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the baler: The entire press system (baler and conveying equipment) is in good, immediately operational condition, and has been cleaned weekly, lubricated, and serviced as per manufacturer guidelines by the operator. Technical data for chain belt conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain belt conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/sec Feed belt length: 7,000 mm Uphill belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: HSM baler VK 8818 R-FU Maintenance platform Bale chute Wire deflection stations Wire spool trolleys (without wire spools) Chain belt conveyor Stadler KF 1800 Transverse sliding belt conveyor Pit cover from infeed conveyor to pit Second control cabinet for operating the press at the conveyor Machine documentation in English Delivery time: The entire system has already been dismantled, stored and is ready for loading at short notice upon receipt of payment. We would be pleased if this or any of our other balers is of interest to you. Your Service Team Mertens & Frowein GmbH

Stav: dobrý (použitý), Rok výroby: 2000, Komorová pec Miwe Ideal - Model 600/6R - používaná - rok výroby 2000 - plocha 6 m² - manuálne ovládanie - 6 komôr 0,6 x 1,6 m - digestor s ventilátorom - olejový alebo plynový horák - pec z výroby Hodpfx Aeyzy Eija Ujl - technický stav dobrý - cena na vyžiadanie

Stav: veľmi dobrý (použitý), Rok výroby: 2006, 684 POUŽITÁ pekárenská pec, etážová pec, pec na plyn alebo olej. Máme k dispozícii 2 takéto pece. VONKAJŠIE ROZMERY: - šírka: 255 cm - hĺbka: 350 cm - výška: 256 cm ROZMERY KOMORY: - šírka: 180 cm - dĺžka: 200 cm Horák na plyn alebo olej. TECHNICKÉ ÚDAJE: - pečiaca plocha: 18 m² Hodpfsp N D I Hex Aa Uel - 5 komôr - možnosť voľby plyn/olej horáka - nerezové opláštenie Zariadenie je pripravené na obhliadku v našom sklade (36-068 Bachórz, Poľsko). Dostupné platené možnosti: renovácia / preprava / montáž / uvedenie do prevádzky. Uvedená cena je bez DPH. HOVORÍME PO ANGLICKY, NEMECKY, FRANCÚZSKY, RUSKY A UKRAJINSKY.

Stav: veľmi dobrý (použitý), Rok výroby: 2011, Funkcionalita: plne funkčný, výkon: 9,7 kW (13,19 k), Technical data of cardboard shredder (2-shaft shredder): Manufacturer: Presto GmbH & Co. KG Model: PZA Year of manufacture: 2007 Throughput capacity: 130 m³/hour Speed: 37/9 rpm Motor power: 7.5 / 2.2 kW Electrical connection: 32 A Shredder inner dimensions: 1,490 x 1,320 x 530 mm (L x W x H) Shredder external dimensions (without cover): 2,308 x 1,320 x 685 mm (L x W x H) Machine weight: 0.45 t Application: The PZA cardboard shredder was used in a Dutch logistics center to pre-shred loose, set-up cartons from the returns department before compacting them into bales. Cartons were manually placed onto the infeed conveyor and transported directly to the shredder via a slide belt conveyor. The pre-shredded cartons were then conveyed over several hundred meters to the baler for compaction. Scope of delivery: Hjdpfxsu Tha Ij Aa Uol 1 piece Presto cardboard shredder (2-shaft shredder) model PZA Remarks: The cardboard shredder was an essential component of the disposal line and was well maintained to ensure high operational availability in the returns department. The machine is in good condition and ready for immediate use. Price is per piece ex works from our warehouse in Siddeburen, Netherlands. All documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. Inspection by appointment is possible. We accept no liability for the technical data or possible errors.

Stav: dobrý (použitý), Rok výroby: 2010, prevádzkové hodiny: 3 641 h, Funkcionalita: plne funkčný, lisovacia sila: 36 t, šírka plniaceho otvoru: 1 100 mm, dĺžka plniaceho otvoru: 1 080 mm, šírka balíka: 1 100 mm, výška balíka: 750 mm, výkon: 15 kW (20,39 k), objemový prietok: 90 m³/h, Technical Data Compactor: Manufacturer: Presto GmbH & Co. KG Model: CC 36 M Year of manufacture: 2010 Operating hours: 3,641 h Main press force: 36 t Specific press force: 467 N/cm² Feed chute dimensions: 1,080 x 1,100 mm (L x W) Hodpou Thh Eefx Aa Ujl Cycle time: 34 seconds Fill volume per press cycle: 0.85 m³ Theoretical throughput: 90 m³/hour Throughput under operating conditions with a bulk density of 35 kg/m³: approx. 51 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 15 kW Tying: 4-fold vertical, semi-automatic, with polyester twine Throughput at a bulk density of: - 35 kg/m³: 1.8 t/hour - 60 kg/m³: 2.5 t/hour - 100 kg/m³: 3.1 t/hour Transport dimensions (press only): 4,200 x 1,640 x 2,200 mm (L x W x H) Machine weight (press): approx. 4 t Remarks: The machine was function-tested in our workshop, then stored and is therefore available at short notice. The machine documentation (operating manual, CE certificate, electrical and hydraulic schematics) is available. Inspection by appointment is possible. We do not accept liability for the technical data or possible errors.

Stav: dielensky repasované (použité), Rok výroby: 2009, prevádzkové hodiny: 22 029 h, Funkcionalita: plne funkčný, lisovacia sila: 80 t, šírka plniaceho otvoru: 1 000 mm, dĺžka plniaceho otvoru: 1 400 mm, šírka balíka: 1 100 mm, výška balíka: 750 mm, hmotnosť balíka: 600 kg, celková hmotnosť: 16 000 kg, výkon: 45 kW (61,18 k), rok poslednej generálnej opravy: 2025, Technical data baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours, as of December 2025 Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Feed opening dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length adjustable Drive power: 45 kW Total connected load: 75 kW Binding: 4-fold vertical, fully automatic Throughput capacities at a bulk density of: - 30 kg/m³: approx. 6.0 t/hour - 50 kg/m³: approx. 10.5 t/hour - 100 kg/m³: approx. 17.5 t/hour Bale weights (bale length approx. 1.2 m): up to 600 kg, depending on material PLC control: Siemens S7-300 Display panel: pulsotronic Installed press dimensions: 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight (baler): 16 t Special equipment: - Wear-resistant floor made of HARDOX steel - Special press ram for compacting "difficult" materials and loose bulk materials of small particle size - Control cabinet air conditioning - Machine base elevation 200 mm Remarks: The machine was serviced and partially overhauled in our workshop. The following tasks were performed and parts replaced: • Disassembly of the press ram, breakdown into individual parts, overhaul of the mechanism, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Central plastic main wear plate (support plate) under the press ram • Steel guide rails left/right at the top of the frame replaced • Complete base plate replaced (in four sections), made of wear-resistant HARDOX steel • Wire feed rails in the press base newly welded and smoothed • Counter knife assembly (two-part) in the frame replaced • Knife gap adjusted to approx. 2.5 mm • Disassembly of the tying and twisting unit, breakdown into individual parts, overhaul of the mechanism, replacement of all groove ball bearings and axial ball bearings of the twisting shafts, wire cutters cleaned and re-aligned, chains lubricated and tensioned Hsdpfxex A U Nce Aa Usl • Carrier roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil and air filters replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, chemically analyzed, in good condition and therefore has not been replaced and can continue to be used • General maintenance performed Afterwards, the baler was subjected to a machine test in manual and automatic mode (see video of machine function test).

Stav: nový, Rok výroby: 2026, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with a free-standing bending head can be easily converted for complex geometries to both right- and left-hand bending. Plug-in bending tools allow for quick changeover to other tube sizes. A high-speed hydraulic system for reducing non-productive times is a key factor for series production. The clamping pressure for tube clamping is optimally adjustable. The PLC control (USB-stick expandable), with data storage and the latest X2X interface, can store an almost unlimited number of programs for bending angles, length measurements, and twist angles for up to 50 bending sequences on a single tube. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine offers two operating modes: In "Simple Bending" mode, length and rotation of the bends are displayed automatically. In "Controlled Bending" mode, the data is pre-stored and a continuous set-actual value comparison is performed during bending. This eliminates mispositioning within a tolerance window and thus minimizes user-dependent error rates. General error messages are displayed in full text on the large screen. The mandrel retraction is programmable and can be automatically returned early upon reaching the bending angle. The compact drive unit with detachable mandrel support offers advantages for on-site installation as well as for special designs with very long tube loading, and is also available as a stationary variant with an organizing system for tools and mandrel rods. The cost-effective alternative to fully controlled CNC machines. POSSIBLE FIELDS OF APPLICATION: • Hydraulic piping • Pipeline construction • Plant engineering, e.g., chemical industry • Metal construction • Prototype construction • Technical data: • Bending capacity Ø 6 to 50 x 4 mm, depending on material • Bending radius min/max: 10 mm/140 mm • Minimal bending radii: 1.5 x Ø (standard 2 x Ø) • Multi-function machine control, bending angle setting (0.1°) • Mandrel support lengths 1500/3000/4500/6000 mm (special versions longer available) • Maximum 180º bending result Hsdpfeng Exasx Aa Uel • Weight 800-900 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-action chuck • Length and rotation positioning via automatic brake function or manual stops via foot switch • Automatic length and rotation positioning via servomotors • Pneumatic rotation stop • Tube calculation software • Laser-assisted tool monitoring for checking tool tension • 10-inch touch screen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our in-house demo room • Consultation/information session at your site • Consulting and processing as a leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your premises

Stav: nový, Rok výroby: 2025, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with a freestanding bending head can be easily converted for complex geometries to allow both right- and left-hand bending. The plug-in bending tools enable quick changeover to other tube sizes. A high-speed hydraulic system reduces non-productive times and is a key factor for series production. The clamping pressure for tube holding can be optimally adjusted. The PLC control (expandable via USB stick), featuring data storage and the latest X2X interface, can store a virtually unlimited number of programs for bending angles, length measurements, and torsion angles for up to 50 bends per tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine features two operating modes: In ‘Simple Bending’, the system automatically displays the length and twist of the bends relative to each other. In ‘Controlled Bending’ mode, the data is pre-stored and a permanent target/actual comparison is done during the bending process. This guarantees precise positioning within a defined tolerance window, minimizing operator-related errors. General fault messages are displayed in full text on the large screen. Mandrel retraction is programmable and can be triggered automatically upon reaching the bending angle. Hedpfx Aasndn Age Uel The compact drive unit with the detachable mandrel carrier offers advantages both for on-site assembly and for special constructions requiring large tube feed, and is also available as a stationary variant with an organization system for tools and mandrel shafts. The cost-effective alternative to a fully automated CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering, e.g. chemical industry • Metalworking • Prototype construction Technical data: • Bending capacity Ø 6 to 50 x 4 mm depending on material • Bending radius min/max: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunctional machine control, bending angle setting (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special versions longer on request) • Maximum 180º bending result • Weight: 600-700 kg (depending on configuration) • Ergonomic operation with safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-action chuck • Length and torsion positioning via automatic braking function or manual stops with foot switch • Semi-automatic length and torsion positioning via servomotors • Pneumatic rotation stop • Tube calculation software • Laser-assisted tool monitoring for checking tool clamping • 10-inch touchscreen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: • Welcome to test production in our in-house demo room • Consultation and information session at your site • Leasing/financing consultation and handling via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Stav: nový, Rok výroby: 2025, NADSTAVEC NA OHÝBANIE PROFILOV PB20 Ideálnym doplnkom pre ohýbanie rúr na modeloch 3000 a 6000 je nadstavec na ohýbanie profilov PB20. Zariadenie je možné jednoducho a rýchlo nasadiť na hriadeľ ohýbačky bez potreby použitia náradia. Obrábaný kus je upnutý na otočný tanier so zvernými čeľusťami a ťahaný okolo ohýbacieho nástroja. S týmto systémom je možné presne zmerať a opakovateľne ohýbať dĺžky ramien s využitím dorazu. TECHNICKÉ ÚDAJE: • Ohývacia kapacita oceľ 37: 100 x 10 mm, Ø 20 mm • Dostupné mnohé štandardné nástroje • Možnosť špeciálnych nástrojov • Nástroje na ostré hrany s ohýbacím rádiusom R2 alebo 5 mm • Okrúhle nástroje R 10 až 25 mm pre ohyby max. 260°, voliteľné NAŠE SLUŽBY: Hsdpfx Asnh R Ekoa Ujl • Možnosť testovacej výroby v našich priestoroch v demo miestnosti • Konzultačné a informačné stretnutie priamo u vás • Konzultácia a realizácia financovania/leasingu cez spoločnosť JUTEC • Možnosť odkúpenia vašej aktuálnej stroja protihodnotou • Servisné zmluvy, údržba priamo u vás

Stav: nový, Rok výroby: 2025, MOBILE PIPE BENDING MACHINE WITH HIGH PERFORMANCE: Hodpfenfvx Nex Aa Usl The compact, mobile design enables precise and repeatable bending both stationary and directly on-site, for pipe diameters up to 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox ensure strong drive power. The motor speed is automatically adjusted, allowing for a quicker return stroke and reduced cycle times. Direct position detection on the bending axis provides optimal bending accuracy and very high repeatability. The bending angle can be set to 0.5° quickly and easily via push buttons. The large LCD display clearly indicates angles. Up to three bending angles can be saved, allowing for efficient bending of pipes with different requirements. For transport, the compact unit including accessories can be stored safely and neatly in robust transport cases. The “stationary tube, rotating tool” principle means minimum space is needed during bending. Slide shoes are used for thin-walled pipes, enabling wrinkle-free bending and minimal deformation, e.g. for stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square and round bars can be bent effortlessly. POTENTIAL APPLICATIONS: • Hydraulic pipe assembly • Prototype construction • Plumbing and heating installation Technical data: • Bending capacity: Ø 6 to 35 mm, CU Ø 42 mm depending on material • Min./max. bending radius: 36 mm / 150 mm • Precise digital bending angle adjustment: 0.5° • Max. 180º bending result; continuous operation possible for special applications • 40 mm hexagonal shaft for quick tool changes • Safety foot switch with emergency stop • 230 V, single-phase connection • Weight: 29 kg • Frequency inverter and three-phase motor • Storage for 3 bending angles OPTIONAL ACCESSORIES: • Slide shoe mount • Double roller apparatus • PB20 Profile Bender – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod stand • Machine case • Tool case • Small bending device KBV • Special tools as per request OUR SERVICES: • Test production in our in-house demo room • On-site consultation at your facility • Leasing/financing purchase advice and processing via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Stav: nový, Rok výroby: 2025, číslo stroja/vozidla: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME APPLICATIONS: The compact bending machine enables precise and repeatable bending up to an outside diameter of 100 mm, both stationary and directly at the installation site. Transport is possible using a pallet truck or the optional rollers. A powerful three-phase motor and a precision gearbox ensure a robust drive. The machine stands out for its compact and slim design, as well as a very open bending area. Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle is set easily and quickly via a user-friendly, menu-guided interface available in 14 languages with touchscreen control, allowing for even more intuitive operation. For more complex bending tasks, it is possible to store up to 100 bending programs, with an angle sequence of max. 8 arcs per geometry. The multifunctional control allows the bending speed for forward and backward movement to be variably set, and features a parameterizable overbend function to compensate for material springback. With the help of four material characteristic curves, the material is automatically overbent to the required bending angle, achieving a precise bending result. The principle of “stationary tube and rotating tool” ensures minimal space requirements during bending. For thin-walled tubes, sliding shoes are used to produce wrinkle-free bends and to bend arcs with minimum deformation, e.g. from stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square, and round steel can be bent effortlessly. The small-radius bending device KBV, as an attachment, allows for extremely small bending radii. POSSIBLE APPLICATIONS: • Plant construction Hedpjndk N Aofx Aa Ujl • Hydraulic piping • Serpentine bending • Prototype construction • Plumbing and heating installation • Shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material Three-phase current 400 V • Bending radius up to 500 mm • Multifunctional machine control, bending angle setting (0.1°) • Maximum bending angle 240° • Safety foot switch with emergency stop • Weight 600 kg OPTIONAL ACCESSORIES: • Adapter system for tools from the 3000/6000 series with bending radii from 45 mm, incl. 40 mm hexagonal shaft • Profile bender PB20 – for bending flat and square steel up to max. 100 x 10 mm, round steel up to max. 20 mm • Small-radius bending device KBV • Special tools based on customer requirements • Software modifications for special applications OUR SERVICE: • Welcome to test production at our in-house demo room • Consulting and information session at your site • Consulting and processing for lease/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your site

Stav: nový, Rok výroby: 2025, číslo stroja/vozidla: 1018, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine with a manual eccentric quick-clamp for tube fixation enables efficient bending operations. The compact drive unit with a detachable mandrel carrier offers advantages for use directly at the installation site. By incorporating position detection directly on the bending axis, we achieve optimal bending accuracy. The bending angle is set quickly and easily via a convenient touchscreen control with a menu-driven user interface. The comfort control provides two speed options as well as a programmable overbend function to compensate for material springback. The bending process is significantly shortened by the automatic "free movement" at the end of the bend. For more complex bending tasks, bend programs can be stored with a sequence of up to 50 angles per geometry. An almost unlimited number of programs can be saved to the controller or a USB stick, along with up to 200 different materials. The plug-in bending tools allow for rapid changeover to other tube sizes. For tricky geometries, the machine can be reconfigured for right- or left-hand bending as standard. The open bending unit allows, for example, the bending of railing frames with only one weld seam. Optionally available calculation software determines the total cut length for the entire geometry as well as feed path, twist, and bending angle for each bend. The mandrel retraction is programmable and can retract automatically upon reaching a specified bending angle. POSSIBLE APPLICATIONS: • Plant construction, e.g. chemical plants • Hydraulic piping • Prototyping • Pipeline construction TECHNICAL DATA: • Bending capacity Ø 6 to 50 mm • Minimum/maximum bending radius: 10 mm/140 mm • Bending radii 2 x D • Multifunction machine control, bending angle setting (0.1°) • Mandrel carrier lengths 1500/3000/4500/6000 mm (custom lengths available) • Maximum bending result 180º • Weight 300-500 kg (depending on model) Optional accessories: • Automatic mandrel lubrication (minimal quantity) • Digital measurement of length and rotation (0.1 resolution) • Remote control of all functions on the carriage (rotation and length stop) • Bending radius up to 250 mm • PC-based tube calculation software OUR SERVICE: Hedpfxsnfvy Ue Aa Uol • Test production welcome in our in-house demo showroom • Consulting and information meeting at your location • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance