Rummel Kunststofftechnik Gmbh Temp2 150 9A Ssr kúpiť použité (74 951)

Stav: nový, Rok výroby: 2025, General: - Maximum temperature range: 150°C for oil (heat transfer fluid) - Robust sheet steel housing - Unit on castors Hydraulics: - Seal-less immersion pump - Q max. 60 l/min – P max. 3.8 bar - Tank and heater made of stainless steel - Heating capacity: 9 kW - Tank volume: approx. 20 litres - Fittings made of brass/stainless steel - Manual oil filling - Mechanical level indicator - Indirect cooling system (shell-and-tube heat exchanger) - Cooling capacity: approx. 40,000 kcal/h - Pressure gauge - Bypass Dodpfx Asddv Itjbxokp - Solenoid valves for cooling Electrics and control: - Electronic PCB control - Solid state relay - Safety thermostat - Sensor break monitoring - Connection cable with plug Available in approx. 4 weeks!

Stav: nový, Rok výroby: 2025, TEMP 90 W9 SSR - DM General Information: - Maximum temperature range: 90°C water Dkedsd Aathepfx Abxop - Robust sheet steel housing - Unit mounted on castors Hydraulics: - Immersion pump (Speck brand) with pressure/vacuum function (leak-stop mode) - Max. flow rate: 60 l/min. / Max. pressure: 3.8 bar - Tank and heater made of stainless steel - Heating capacity: 9 kW - Tank volume: 12 liters - Fittings made of brass/stainless steel - Automatic water refill - Electronic level monitoring - Indirect cooling system (plate heat exchanger) - Cooling capacity approx. 40,000 kcal/h (10 plates) - Pressure gauge - Integrated bypass - Solenoid valves for cooling and refilling Electrical and Control: - Electronic, self-optimizing PCB control - Electronic flow measurement - Control voltage in the unit: 24 V AC - Acoustic and visual alarm indication - Solid-state relays - Safety thermostat - Sensor break monitoring - Hose rupture and leakage monitoring - Connection cable with plug - Dimensions: 295 x 575 x h495 mm - Weight: 40 kg

Stav: nový, Rok výroby: 2025, TEMP 90 W9 SSR General Information: - Maximum temperature range: 90°C water - Sturdy sheet steel housing - Unit on castors Hydraulics: - Immersion pump (manufacturer: Speck) with pressure/vacuum function (leak-stop mode) - Qmax: 60 l/min, Pmax: 3.8 bar - Tank and heater made of stainless steel - Heating capacity: 9 kW - Tank capacity: 12 litres - Fittings made of brass/stainless steel - Automatic water refill - Electronic level control - Indirect cooling system (plate heat exchanger) - Cooling capacity approx. 40,000 kcal/h (10 plates) - Display manometer - Integrated bypass - Solenoid valves for cooling and filling Electrical and Control: - Electronic, self-optimizing PCB control - Control voltage in the unit: 24 V AC - Acoustic and visual alarm indicator - Solid state relay - Safety thermostat - Sensor break monitoring - Monitoring of hose rupture and leakage - Connection cable with plug - Dimensions: 295 x 575 x h495 mm - Weight: 40 kg Dkjdpfxod Aaruj Abxop

Stav: ako nová (výstavný stroj), Rok výroby: 2026, výkon: 1,5 kW (2,04 k), S&F vibračná triediaca triedička | Triedička typ ASM-150 Predvádzací stroj Výrobca: S&F GmbH Typ: ASM-150 Výkon triedenia: cca 15 – 25 m³/h (v závislosti od materiálu) Počet frakcií: 3 Triediaca plocha: 1,5 m² na každé sito Počet sítových úrovní: 3 ks Veľkosť ôk sít: - 1. úroveň: dierovaný plech, D = 40 mm, prípadne podľa dohody - 2. úroveň: dierovaný plech, D = 10 mm, prípadne podľa dohody Výkon pohonu: 1,5 kW, 3 x 400 V, 50 Hz Rozmery (D x Š x V): 2 700 x 1 500 x 1 300 mm Prevedenie: Profi Line Hmotnosť stroja: cca 1 200 kg Farba stroja: RAL 7043 (dopravná sivá B) // Ochranný kryt: RAL 3020 (dopravná červená) Dodpfjy Sixmox Abxekp Sítové vložky voliteľné Vývod materiálu podľa požiadaviek zákazníka Vhodné najmä na triedenie nasledujúcich sypkých materiálov: - Drevná štiepka - Piliny a drevný prach - Biomasa - Drevené pelety - Drevo uhlie - Odpadové drevo - Kôra Vibračné sito | Sito na štiepku | Vibračná triedička | Plansito | Vibračné sito | Bubnový triedič | Triedička na štiepku | Triedička pre BHKW

Stav: veľmi dobrý (použitý), Rok výroby: 2019, Funkcionalita: plne funkčný, 1 x miešací marinátor Glass GmbH na jemné potravinárske produkty, s manuálnym sklápáním a multifunkčným ovládacím displejom. Namontovaný na mobilnom ráme. Vhodný na polosypké, práškové aj tekuté produkty. Model / Typ – VSM 150. Sériové číslo – 4174 Rok výroby – 2019. Kapacita – 150 litrov. Elektrická prípojka – 400 V / 50 Hz / 3 fázy. Dedpfx Abjvuhiqjxokp Príkon – 16 A.

Stav: nový, Rok výroby: 2026, Funkcionalita: plne funkčný, výkon: 5,5 kW (7,48 k), vstupné napätie: 400 V, vstupná frekvencia: 50 Hz, typ vstupného prúdu: trojfázový, šírka brúsneho pásu: 150 mm, dĺžka brúsneho pásu: 9 000 mm, typ nastavenia výšky: elektrický, rýchlosť brúsneho pásu: 25 mm/s, celková výška: 2 200 mm, celková dĺžka: 4 640 mm, celková šírka: 2 650 mm, celková hmotnosť: 1 200 kg, dĺžka brúsenia: 2 500 mm, hmotnosť obrobku (max.): 80 kg, priemer odsávacieho pripojenia: 180 mm, šírka brúsenia: 950 mm, otáčky (max.): 1 435 ot./min, potrebná výška: 2 200 mm, požiadavok na dĺžku priestoru: 4 640 mm, požadovaná šírka: 2 650 mm, nastavenie výšky stola: 500 mm, Výbava: dokumentácia / manuál, Wide Belt Sander M2S92-150 with two sanding belts for manual grinding, matting, and polishing. Suitable for processing steel, stainless steel, and brass. Not suitable for aluminum or titanium! Scope of delivery includes: - Machine frame with connecting elements - Belt drive - Pneumatic belt tensioning and manual belt tracking control - Sanding unit with contact roller, manually shiftable from belt 1 to belt 2 - Electric table elevation - Flat machine table - Workpiece stop rule on the machine table - Initial set of sanding belts - CE-compliant version - Operating manual + manufacturer's declaration in accordance with Annex 2 The robust machine features a welded steel construction that ensures exceptionally smooth operation. Both machine stands are designed with a recess, allowing longer parts to be ground on the machine. The three-roller belt guidance system provides the operator with a maximally open working area, making it especially suitable for use with hand sanding blocks. The belt drive is powered by a three-phase motor with a dynamically balanced drive roller. Each sanding belt features individually adjustable pneumatic tensioning for optimal tensioning force per belt. The dust collection system is dimensioned to efficiently capture grinding dust and direct it towards the extraction nozzle, when connected to a proper extraction unit. For fatigue-free operation, the sanding unit is mounted in play-free roller guides. The machine table can be easily and quickly adjusted to the required workpiece height via motorized elevation, with maintenance-free elevation guides. For loading, the table can extend far enough so that workpieces do not need to be pushed under the sanding belt. All main function controls are ergonomically positioned at the center of the machine. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small casings in "light grey" The base configuration of the machine includes two initial equipment belts (W x L) 150 x 9000 mm and a contact roller approx. 50° Shore for 150 mm belt width. Optional accessories: Djdpfxev S Sr Rj Abxskp 3-axis table with integrated handling device for rotating and swiveling workpieces. The handling device is mounted at the center of the table underneath the insertion frame. To use the handling device, the insertion frame is removed from the machine table. The handling device is equipped with four vacuum suction cups for holding workpieces and consists of: a bearing with rotary axis (with a brake disc mounted on the rear). At the front of the rotary axis, a swivel mechanism is attached, which can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. The swivel head features an additional indexing plate for fine adjustment of the workpieces in relation to the sanding belt. Pneumatic foot switches unlock the rotation and swivel axes, while rotation is performed manually. Maximum workpiece weight using the table as a flat table with insertion frame = 80 daN; when using the handling device on the clamping plate = 25 daN or 120 Nm related to the rotary axis center.

Stav: nový, Rok výroby: 2026, Funkcionalita: plne funkčný, výkon: 5,5 kW (7,48 k), vstupné napätie: 400 V, vstupná frekvencia: 50 Hz, typ vstupného prúdu: trojfázový, šírka brúsneho pásu: 150 mm, dĺžka brúsneho pásu: 7 000 mm, typ nastavenia výšky: elektrický, celková výška: 2 200 mm, celková dĺžka: 3 550 mm, celková šírka: 2 000 mm, celková hmotnosť: 870 kg, dĺžka brúsenia: 1 500 mm, hmotnosť obrobku (max.): 80 kg, priemer odsávacieho pripojenia: 180 mm, šírka brúsenia: 950 mm, otáčky (max.): 1 435 ot./min, potrebná výška: 2 200 mm, požiadavok na dĺžku priestoru: 3 550 mm, požadovaná šírka: 2 000 mm, nastavenie výšky stola: 500 mm, Výbava: dokumentácia / manuál, Wide Belt Sander MS92-150 3-roller deflected sanding belt 150x7100 mm For manual grinding, finishing, and polishing. Suitable for processing steel, stainless steel, and brass. Scope of delivery includes: - Machine stand with connection elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking adjustment - Grinding unit with contact roller - Electric table lift - Flat machine table - Workpiece stop ruler on the machine table - Initial supply sanding belt Dkjdpfxetwb U Ae Abxjp - Operating manual + manufacturer’s declaration - CE-compliant version The robust steel-welded machine frame ensures very smooth running. Both machine stands are offset to allow grinding of parts longer than the machine table. The 3-roller belt guidance provides a maximally open working area for the operator, especially facilitating work with hand sanding blocks. The belt drive is powered by a three-phase motor with a dynamically balanced drive roller. The belt has adjustable pneumatic tensioning. The dust extraction device is designed to effectively collect grinding dust and direct it to the extraction nozzle when connected to a suitable extraction system. To ensure fatigue-free operation, the grinding unit is mounted in play-free roller guides. The machine table can be quickly and easily set to the correct workpiece height by the electromotive table lift. The table lift guides are maintenance-free. For loading, the table can be retracted so far that workpieces do not need to be pushed under the sanding belt. The electrical controls for the main functions are centrally located for operator convenience. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small enclosures in "light grey" The basic machine is supplied with an initial equipment belt (W x L) 150 x 7100 mm and a contact roller approx. 50° Shore for 150 mm belt width. Additional accessory: 3-axis table with integrated handling device for rotating and swivelling the workpieces. The handling device is mounted in the centre of the table, under the insert frame. To use the handling device, the insert frame is removed from the machine table. The handling device is equipped with four vacuum suction pads for clamping the workpieces and consists of a rotary axis bearing with a brake disc at the rear. The swivelling device is attached to the front of the rotary axis, featuring locking positions at 0°, 22.5°, 45°, 67.5°, and 90°. An additional indexing disc on the swivel head allows for fine adjustment of the workpiece relative to the sanding belt. Release of the rotary and swivel axes is actuated pneumatically via a foot switch, while rotation is manual. Maximum workpiece weight using table with insert frame = 80 daN. Maximum workpiece weight using handling device, based on the clamping plate = 25 daN or 120 Nm relative to the centre of the rotary axis.

Stav: použitý, Funkcionalita: neoverené, Wostor Euromarker basic 150 - Rukoväť skrutky je zlomená a mierne ohnutá - Doručenie možné za príplatok Dksdpfx Abew U Ir Nsxsp

Stav: použitý, Rok výroby: 2022, Funkcionalita: plne funkčný, číslo stroja/vozidla: 410798, typ vstupného prúdu: trojfázový, The Kraft VPS100/1500 is a high-precision, fully automatic carton cutting machine for flexible and efficient production of shipping and protective packaging from continuous corrugated cardboard – ideal for operations with a wide variety of small batches or on-demand production. The patented multi-tool enables creasing, perforating, and cutting in a single pass, both longitudinally via the processing roller and transversely via the integrated cutting bar. 🎛 Processing & Tools - 6× multifunction tools for longitudinal processing - 1× multifunction tool for transverse processing - Creases are applied gently to the material via creasing slides – reducing carton bursting - Perforation with oscillating cutting blade; adjustable intensity - Cutting with a serrated blade on a rubberized roller → clean, fibre-minimized, grippy cut edge ⚙ Drive & Mechanics - Maintenance-free, high-dynamic linear drives for precise feed - Segmented upper pressure for reliable carton infeed - 2 rubberized rollers as counter-cut and transport media 📐 Technical Data - Max. working width: 1,500 mm - Min. working length: 380 mm Carton thickness: - Min. 1.5 mm (E-flute 1.3) - Max. 7.0 mm (BC-flute 2.7) Tool width: approx. 45 mm ➕ Carton Feeding (Feeder Frame) - Max. stack height: 2,100 mm + 120 mm pallet - Max. feed rate: 100 m/min - Min. web width: 300 mm - Max. web width (VPS 1500): 1,500 mm - Total width “side by side”: max. 1,350 mm 💻 Control & Software Hardware - BECKHOFF industrial PC C6930 (Intel® Core™ i5-7500T, 2.7 GHz, 4 cores) - 16 GB RAM, 240 GB SSD - Windows 10 IoT Enterprise - 21" multitouch panel Djdjx Emguspfx Abxjkp - Control cabinet integrated in base machine Software Functions - Multi-stage cutting optimization - Dynamic tool management - Bidirectional multi-line processing - User management (User, Service, Admin, Kraft) - Comprehensive production, carton, and design management - Message statistics, manufacturer documentation, training videos, service portal etc. Documentation - Operating manual in local language - Circuit diagrams in German or English - Spare parts drawings Additional Equipment - Standard interface for barcode scanner, file import (XML), database import - Operating console mounted on left on swing arm 🔄 Setup Times & Performance - Changeover time with automatic carton changer: approx. 4.5 seconds - Pure tool repositioning: approx. 2.5 seconds - Machine is supplied with several FEFCO formats and is ready for production (e.g. 0201, 0331, 0403, 0410, 0412, 0421, 0401 incl. perforation) 🚚 Assembly, Transport & Year of Manufacture - Demonstration and test machine, year of manufacture 2019 - In single-shift operation since 2022 - Dismantling, packaging, and delivery carried out by seller - For unloading, a 3.5 t forklift with long forks is required 🎨 Colour Scheme - Base machine: RAL 7015 (Slate Grey) & RAL 7035 (Light Grey) - Safety guard: RAL 7015 - Guard posts: RAL 7035 💡 Key Advantages of This Machine - Very short setup times → ideal for diverse packaging production - Fibre-minimized cut edges → less risk of injury & better appearance - Intuitive user interface - Fully automatic operation with high precision - Immediately ready for use thanks to provided design templates - Low-maintenance linear drives - High process stability due to upper pressure segments

Stav: takmer ako nový (použitý), Výbava: Dostupný typový štítok, Použitá nerezová prepravná nádrž Dkodpjr A Engsfx Abxop Pripravená na miešadlo Typ: SBPA150 Číslo artiklu: 10796 Objem: 173 litrov Typ: stojatá konštrukcia na palete Prevedenie: jednoplášťová, hrúbka steny 1,5 mm Materiál (v styku s médiom): nerezová oceľ 1.4301 Povrch: vonkajší saténový, vnútorný IIId Zvárané švy vo vnútri: morené, pasivované a kartáčované Prevádzkový tlak: atmosférický Vrchná časť: 1/2 výklopné veko Spodná časť: dno Klöpper s výpustným žliabkom Rozmery nádrže: Priemer nádrže: 650 mm Celková výška: 815 mm Paleta: 675 x 719 mm Vybavenie: 1x 1/2 výklopné veko na vrchnej časti, aretačná funkcia (veko je možné zaistiť v otvorenej 90° polohe) Nerezový rošt pod výklopným vekom, skrutkovaný, vyberateľný DN50 guľový kohút - výpusť armatúra podľa DIN 11851 Pozinkovaná prepravná paleta Typový štítok

Stav: nový, Brand new electrically heated stainless steel agitator tank with insulation and propeller agitator, including operating manual and CE declaration of conformity. EBB150RWP Alternatively available with other agitator types and in different sizes. Capacity: 152L Approx. dimensions: Ø 660mm x cylindrical height 625mm Overall height: 910mm (+ agitator motor) Material: 1.4301 stainless steel V2A Surface finish: IIIc / 2B Weld seams ground Max. operating temperature: 110°C Operating pressure (tank): ATM - Stationary design on castors - Top: split lid, half screwed, half hinged with stainless steel finger guard grating (removable) - Bottom: flat base with lateral outlet DN50 DIN11851 and butterfly valve, gasket EPDM - Agitator flange nozzle on top cover - 2x push handles - 1x nameplate Agitator: Propeller agitator Power: 0.25kW Dkodpfx Aoym Uclobxjp Speed: 980rpm Operating voltage: 3PH 400V

Stav: nový, Factory-new electrically heated 1150L stainless steel agitator tank with insulation and propeller agitator, including operating manual and CE declaration of conformity. Type: EBB1150RWP Also available with alternative agitators and in other sizes. Volume: 1150L Dimensions approx.: Internal Ø 1190mm x cylindrical height 1000mm External: Ø 1390mm Total height: Approx. 1300mm plus agitator motor Material: 1.4301 / AISI304 stainless steel Surface finish: IIIc/IIId / satin finish Internal weld seams ground Max. operating temperature: 110°C Max. operating pressure: ATM - Upright design on four tubular feet with forklift tunnel - Top: Central traverse with two folding lid halves - Bottom: Flat bottom angled with side outlet DN50 DIN11851 and disc valve, EPDM gasket - Insulation: 50mm mineral wool around cylinder, hermetically welded insulation jacket, stainless steel 1.4301 Equipment: 1x Top as central traverse with two folding lid halves, clamp function for folding lid, Stainless steel grid below lid, bolted and removable 1x Agitator flange on the top 1x Inlet nozzle DN50 DIN11851 on the top 1x Outlet fitting disc valve DN50 DIN11851, EPDM gasket 1x Nameplate Propeller agitator for low-viscosity media Power: 0.75 kW Speed: 1410 RPM Operating voltage: 3PH 400V Dodpfx Abew Dy D Doxekp

Stav: nový, Factory-new stainless steel transport container with anchor agitator Type: SLA1150RWA Volume: Approx. 1150L Design: Vertical model with forklift mount Construction: Single-walled, minimum 1.5mm wall thickness Material (product contact): 1.4301 stainless steel Surface: Satin finish outside, IIId inside Internal weld seams: Pickled, passivated and brushed Operating pressure: Atmospheric Top: Central traverse with two hinged lid halves Bottom: Dished end with drainage groove Container dimensions: Container diameter: 1190mm Cylindrical height: 1000mm Total height: 1300mm (plus agitator motor) Features: - Central traverse with two hinged lid sections, stainless steel grating under the lid as reach-in protection, bolted, removable - Container on stainless steel transport base with forklift pockets - DN50 disc valve outlet fitting DIN1185, EPDM gasket Dodpow Dy Ngofx Abxskp - Nameplate Agitator: Central anchor agitator Brand: Schwarzer Rührtechnik GmbH Type: SRTGMK/0.75-13 Power: 0.75kW Speed: 13 rpm Operating voltage: 3PH 400V Product contact material: 1.4301 stainless steel - Gearbox brand: Getriebebau NORD - Solid agitator shaft fixed to the agitator motor with clamp coupling, removable - Shaft balanced for smooth operation across speed range - Large-area stainless steel anchor agitator, welded construction, weld seams pickled, passivated, and brushed - Stainless steel flange with shaft seal, EPDM Agitator control: CEE plug switch on the container, on/off switch, no-voltage release, emergency stop Fully wired

Stav: nový, Factory-new electrically heated stainless steel agitator tank Article number: EBB150RWAD Volume: 152L Dimensions approx.: Ø 660mm x cylindrical height 625mm Total height: 910mm Material: 1.4301 stainless steel V2A Surface: Matt ground inside and outside Weld seams ground Max. operating temperature: 110°C Tank operating pressure: ATM -Upright design on castors -Top: Central traverse for agitator with two folding lid halves -Bottom: Flat bottom with side discharge outlet DN50 DIN11851 and disk valve -Agitator flange nozzle on the upper lid -2x handles for pushing -1x nameplate Heating system: Indirect heating Double jacket around the tank filled with glycerine as heat transfer medium. Heating via electric heating element in double jacket. Power: 9KW Operating voltage: 3PH 400V Incl. power supply cable with 16A CEE plug Central agitator: Slow-running anchor agitator with wall scrapers Type: SRTGMK/0.37-9.5 Manufacturer: Schwarzer Rührtechnik GmbH Power: 0.37KW Speed: 0-9.5RPM Operating voltage: 1PH 230V Product-contacting parts material: 1.4301 stainless steel -Gearbox and motor in latest aluminium technology, manufacturer Getriebebau NORD -Gearbox with food-grade oil filling "Klüber" -Solid agitator shaft attached to the agitator motor with clamping coupling, removable -Agitator shaft dynamically balanced for smooth operation within the speed range -1 large‑format anchor agitator in the tank, welds ground, positioned close to tank wall -2 Teflon wall scrapers in the cylindrical area, one at the bottom -Stainless steel flange with shaft seal, EPDM Speed control: Compact frequency inverter on the agitator motor with ON/OFF switch and potentiometer Control: 5m cable and RCD-Schuko plug switch, no-voltage release Eccentric agitator: Variable-speed dissolver agitator Type: SRTMKD/1.1-1500-Vari Manufacturer: Schwarzer Rührtechnik GmbH Power: 1.1KW Speed: 0-1690RPM Operating voltage: 3PH 400V Product-contacting parts material: 1.4301 stainless steel -Motor in latest aluminium technology, manufacturer Getriebebau NORD Dkjdpfxsh Hxxfo Abxjp -Solid agitator shaft attached to the agitator motor with clamping coupling, removable -Agitator shaft dynamically balanced for smooth operation within the speed range -1 dissolver disk Ø 125mm, screwed to the end of the agitator shaft, O-ring seal, EPDM -Stainless steel flange with V-ring seal, EPDM -Stainless steel spacer pieces for motor mounting Speed control: Frequency inverter mounted on the motor, manufacturer Getriebebau NORD. ON/OFF switch, potentiometer, phase inverter Control: CEE plug switch on tank with no-voltage release and phase inverter, emergency stop

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, číslo stroja/vozidla: 19-1134P, Rok výroby: 2020, prevádzkové hodiny: 4 h, nosnosť: 1 500 kg, zdvíhacia výška: 3 300 mm, typ stožiara: duplex, typ prevodu: hydrostatický, napätie batérie: 24 V, Výbava: Označovanie CE, hydraulika uchopovača, svorka, Výrobca: APE Engineering GmbH Typ: Univerzálny paletový vozík UHW 1500-27/E-Tele-SO Rok výroby: 2020 Napätie: 24V Výška zdvihu: cca 3 300 mm (stred otočného zariadenia) Nosnosť: 1 500 kg Prevádzková doba: 4 h (odčítané) Zariadenie je určené na používanie na rovných podlahách na zdvíhanie, prepravu, uchopenie a otáčanie kelímkov. Kelímky je možné uchopiť a nakloniť. Vybavenie: - 360° hydraulický otočný systém Dksdpfx Ajw Izrcobxjp - Počiatočný zdvih cca 100 mm - Hydraulické upínacie zariadenie - Integrovaná nabíjačka 230V - 24V trakčná batéria Hawker Dodávka zahŕňa: - Univerzálny paletový vozík - Komplet dokumentácia vrátane elektrických schém a vyhlásenia o zhode CE Rozmery: Šírka: cca 1 650 mm Výška: cca 2 300 mm Dĺžka: cca 1 950 mm bez prídavného zariadenia a cca 2 400 mm s prídavným zariadením Stroj je možné predviesť na mieste. Všetky informácie sú bez záruky. Predaj vyhradený. Predmet kúpy sa predáva s vylúčením akejkoľvek záruky. Toto vylúčenie sa nevzťahuje na nároky na náhradu škody z hrubého alebo úmyselného porušenia povinností predávajúceho, ako aj na akékoľvek porušenie života, tela alebo zdravia.

Rok výroby: 2023, stav: použitý, Naše nejmenší bubnové síto, REMAV RS1500, je navrženo pro úsporné třídění na malém prostoru a dokáže zpracovat větší objemy materiálu na omezené ploše s možností předávání materiálu dopravníky na hromadu! Dkjdpshg Epasfx Abxop Jako přívěs pro osobní automobil se silniční homologací (80 km/h) a TÜV certifikátem s celkovou hmotností 2,4 t je snadno přepravitelný. Zpracování všech druhů půd, drceného stavebního odpadu nebo kompostu – RS 1500 je ideální pro zahradní a krajinářské práce, pozemní stavby nebo výstavbu inženýrských sítí. >>> Domluvte si nezávaznou konzultaci

Rok výroby: 2023, stav: použitý, The REMAV drum screening machine RS1500 is designed for space-saving screening and can separate larger quantities of screened material even in confined areas and deposit them via conveyor belts or stockpile. As a road-approved trailer for passenger cars (up to 80 km/h) with TÜV certification and a total weight of 2.4 tonnes, it is easy to transport. It is ideal for processing all types of soil, crushed construction debris, or compost—making the RS 1500 the perfect choice for gardening and landscaping, civil engineering, or pipeline construction projects. With the RS1500 recycling screen, we offer you a compact drum screen that requires very little space while being capable of separating significant amounts of material. A major advantage is that this drum screen is TÜV-approved as a car trailer compliant with 80 km/h road regulations, allowing highly flexible operation at different sites once you buy a drum screen. This is especially valuable for use in civil engineering, pipeline construction, and landscaping. The compact drum screen itself weighs only 2.4 tonnes. For challenging soils, we recommend the compact screens KS220 and KS275. With a total weight of 3.5 tonnes, these can also be conveniently transported to your construction sites, just like the smaller drum screen. Thanks to the hydraulic tipping grid, larger stones or clay lumps can be separated right at the beginning of the process. With appropriate mesh sizes, fine chippings can be screened as well. As a result, it provides valuable support for processing topsoil and recycling concrete, saving you considerable landfill costs when you invest in a drum screen. Quickly transported to site, mobile compact screening plants can efficiently and easily convert large quantities of debris or topsoil into profit. Typically, these compact screening plants process construction debris, humus, gravel, crushed stone, demolition material, and even wood chips in no time. Important for the user: a mobile compact screening plant is suitable both for short-term use on private construction sites as well as for continuous operation on large commercial sites. A key advantage is the manoeuvrability of compact screening plants. Thanks to road approval for 80 km/h, the unit can be hitched to any car or standard vehicle with a towing capacity of 2.5 tonnes and transported to the next site just like a trailer. This results in savings on tipping and landfill costs, as well as on transportation and loading of materials. For which materials is a mobile compact screening plant suitable? Although mobile compact screening plants are relatively small, they can handle a wide variety of materials. For example, topsoil, humus, gravel, and crushed stone can be fed into the screening plant without any issues. Likewise, broken demolition material and wood chips pose no challenge for the mobile compact screening plant. Mini excavators, mobile excavators, tracked excavators, compact excavators, or short-tail excavators—these small, agile machines are known by many names. They are frequently used by private individuals for garden remodelling when shovels and spades are not sufficient, or on small sites in earthworks or landscaping. Furthermore, they have long been standard fleet additions for large construction companies as essential construction equipment. Dkedpfxjrrvy Ae Abxsp

Stav: použitý, výkon: 7 kW (9,52 k), Rok výroby: 2023, S recyklačným sitom RS1500 získate kompaktné bubnové sito, ktoré zaberá veľmi málo miesta, no napriek tomu dokáže oddeliť veľké množstvo triedeného materiálu. Hlavnou výhodou je, že bubnové sito môžete prevážať po verejných komunikáciách ako príves schválený TÜV pre osobné vozidlá, pri maximálnej rýchlosti 80 km/h, čo vám poskytuje mimoriadnu flexibilitu pri výbere miesta nasadenia. Toto je obzvlášť výhodné pri použití v oblasti inžinierskych sietí, výkopových prác a v krajinných úpravách. Zariadenie váži len 2,4 tony. S celkovou hmotnosťou 3,5 tony je preprava na stavby rovnako jednoduchá ako pri menšom bubnovom site. Vďaka hydraulickej sklopnej roštovej mriežke môžete už na začiatku procesu odstrániť väčšie kamene alebo hrudy ílu. Pri zvolenej veľkosti oka možno preosiať aj jemný drvený kameň. Zariadenie je tak veľmi užitočné pri spracovaní ornice a recyklácii betónu a výrazne znižuje náklady na skládku, ak si zakúpite bubnové sito! Dedperrvyuofx Abxjkp Spoločnosť REMAV GmbH je technologicky popredný výrobca recyklačných a triediacich zariadení. V sídle spoločnosti vo Viernheime sa špecializujeme na výrobu zariadení na spracovanie druhotných surovín v oblastiach piesku, štrku a recyklačných materiálov.

Stav: pripravené na použitie (použité), Ponúka sa opraviteľné Maka 5-osé CNC obrábacie centrum na hliník, plast alebo drevo. Pohyby X/Y/Z: 2500mm/1500mm/650mm, max. výška prípravku: 180mm, rýchloposuv X/Y/Z: 60m/min, otočná os C: 540°, výkyvná os A: +/-98° (spolu 196°), počet pracovných stolov: 2, veľkosť stola na každý stôl: 2500mm x 1500mm, zásobníkové miesta: 20 nástrojov na zásobník, celkovo miest na nástroje: 2x20. Pohonový motor osi Z je chybný. Obhliadka možná po dohode. Djdpjzcyq Hofx Abxskp

Rok výroby: 2018, prevádzkové hodiny: 100 h, stav: použitý, Funkcionalita: plne funkčný, HI-magnetický bubon Typ KHP 500x1500 9 Prevádzkové napätie 3×400 V Djdpfxelhqbro Abxskp Frekvencia 50 Hz Menovitý prevádzkový prúd 18,70 A Prevádzkové otáčky 30 – 90 ot./min Maximálna hladina akustického tlaku 50 dB Hmotnosť stroja 850 kg Lokalita: Rakúsko K dispozícii ihneď

Rok výroby: 2023, stav: nový, - moderný ergonomický dizajn - manuálny testovací proces s analógovým meracím hodinovým indikátorom (presnosť odčítania 0,2 HR-jednotky) - jednoduchá obsluha a rýchly testovací proces - výška testovacieho priestoru cca 185 mm - hĺbka testovacieho priestoru cca 160 mm - rozmery 545x182x755 mm Skúšobné zaťaženie: 60 / 100 / 150 kg Skúšobné metódy: HRA/HRB/HRC Dkedpfxopbbc Hs Abxep Štandardný dodávaný obsah: - tvrdosti tester - prizmatická opora - rovinný skúšobný stôl Ø150 mm - rovinný skúšobný stôl Ø50 mm - držiak guľôčky 1/16" s guľôčkou - diamantový vtláčateľ 120° Rockwell - ochrana vretena - kufrík s príslušenstvom

Rok výroby: 2025, stav: nový, Sací pás s dvěma sacími řemeny Vakuum lze nastavovat samostatně Rychlost až 160 m/min Plynulá regulace rychlosti Djdpfjhl H Ikox Abxjkp Výška nastavitelná Dostupné také v jiných délkách Základna pro inkjet

Rok výroby: 2022, stav: nový, Sací pás s dvěma sacími řemeny Vakuum lze nastavovat samostatně Rychlost až 160 m/min Dkodech Hcaspfx Abxep Plynulá regulace rychlosti Výška nastavitelná Dostupné také v jiných délkách Základna pro inkjet

Stav: nový, Rok výroby: 2025, Funkcionalita: plne funkčný, celková výška: 4 500 mm, celková šírka: 7 500 mm, celková dĺžka: 1 000 mm, SPECIAL OFFER – only €5,900 instead of €6,900! Save €1,000 now – limited-time special price. Industrial 4-in-1 Fiber Laser Welding Machine – Model LMH1500 Top performance at a fair price! Our new LMH1500 model with 1500 W Raycus CE-certified laser source offers four integrated functions for professional metalworking: ✅ Key Features: Laser Welding – precise, deep, and virtually distortion-free Laser Cutting – ideal for thin sheet metal up to approx. 4 mm Laser Cleaning – effective on rust, paint, and oxide Weld Seam Cleaning – clean seams immediately after welding 📌 Technical Specifications: Laser Power: 1500W Raycus (CE-certified) Wavelength: 1080 nm Optical Fiber Cable: 10 meters Cooling: Integrated water cooling Operating Modes: Welding, Cleaning, Cutting, Pulse Voltage: 3×400V / 50–60 Hz Welding Speed: up to 120 mm/s Dimensions (L×W×H): approx. 1000×760×450 mm Weight: approx. 170 kg 📦 Delivery Includes: 1× LMH1500 Laser Welding Machine Dksdpfx Aow Tfbrobxep 1× Handheld Welding Torch incl. nozzles 1× Automatic Wire Feeder 1× Laser Safety Glasses 1× User Manual (German) 1× CE Declaration of Conformity 1× Risk Assessment according to Machinery Directive 💼 Fields of Application: Suitable for stainless steel, galvanized sheets, aluminum, copper, brass, and more. Ideal for workshops, mechanical engineering, metal fabrication, body shops, or maintenance. 🔒 Certified & Safe: CE certificate incl. risk assessment compliant with EU directives. Supplied with all required documentation. 📍 Manufacturer / Distributor: TEC-POINT GmbH Kupferstraße 10, 33378 Rheda-Wiedenbrück 🚚 Shipping & Invoice: By freight forwarding (pallet shipping) within Germany & the EU – shipping costs on request. 🧾 Invoice with VAT shown will be issued. ✅ Buy now and have it delivered ready for immediate use!

Stav: nový, Rok výroby: 2024, Funkcionalita: plne funkčný, celková výška: 1 950 mm, stavebná výška: 300 mm, zdvíhacia výška: 1 650 mm, nosnosť: 1 500 kg, celková hmotnosť: 450 kg, celková dĺžka: 2 500 mm, celková šírka: 800 mm, šírka stola: 800 mm, výška stola: 1 950 mm, dĺžka stola: 2 500 mm, transportná dĺžka: 2 500 mm, prepravná šírka: 1 200 mm, šírka plošiny: 1 200 mm, dĺžka plošiny: 2 500 mm, požiadavok na dĺžku priestoru: 2 500 mm, potrebná výška: 1 950 mm, požadovaná šírka: 1 200 mm, výkon: 1,1 kW (1,50 k), Výbava: dokumentácia / manuál, Technický popis s nasledujúcimi hlavnými údajmi: Nosnosť: 1500 kg statické zaťaženie na trati Užitočný zdvih: 1650 mm Stavebná výška: 300 mm Celková výška: 1950 mm Dĺžka plošiny: 2500 mm Dodpfx Abouhphvexokp Šírka plošiny: 1200 mm Materiál: hladký plech Čas zdvíhania: cca 35 sekúnd na plný užitočný zdvih Čas spúšťania: v závislosti od zaťaženia Elektrické pripojenie: 3 x 400 V / 50 Hz + ochranné uzemnenie, s 16 A CEE zástrčkou a 3 m káblom Motor: 1,1 kW, 1400 ot./min Napätie ventilu: 24 V DC Stupeň krytia: IP 54 všeobecne, magnetický ventil a spínač IP 65 Povrchová úprava: prachová šedá RAL 7037 Umiesťnenie agregátu: integrované v zdvíhacom stole Ovládacia skrinka: mŕtvy muž ovládanie, vrátane 2 m kábla Celková hmotnosť: cca 450 kg