Deckel Fp 4 A kúpiť použité (699)

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Výbava: dokumentácia / manuál, Universal milling machine Deckel FP1 with 3-axis digital readout RSF 2006 Fully Refurbished TOP CONDITION Technical Data: >> Machine No. 53819/08 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical and horizontal quill - SK40 >> Spindle brake >> Drawbar system S20x2 >> Weight approx. 700 kg Accessories and Equipment: Cgodpfx Ajvb Ud Ujlyet >> 3-axis digital readout by RSF Elektronik >> Coolant system >> Machine mounts About the Machine: Offered here is a universal milling machine Deckel FP1 in excellent condition. The Deckel shows minimal backlash and all feeds run smoothly. An oil change has been performed. The FP1 was completely overhauled by Huttelmaier in 2006 and has seen only minimal use since then. The RSF digital readout makes operation easier and even more precise. Take advantage of the opportunity to inspect and test the machine under power on-site.

Stav: veľmi dobrý (použitý), Rok výroby: 1984, Funkcionalita: plne funkčný, Výbava: dokumentácia / manuál, Univerzálna frézka Deckel FP1 s aktívnym 3-osovým digitálnym odpočtom Heidenhain TNC 113 a plynulým posuvom – vynikajúci stav Technické údaje: >> Rok výroby: 1984, výrobné číslo: 2102-2601 >> Otočný/naklápací/stolček >> Otáčky: 40 – 2000 ot./min >> Plynulý posuv v 3 osiach >> Rýchloposuv v 3 osiach >> Výkon pohonu: 1,5 / 1,9 kW >> Vretenová brzda >> Pojezdy X/Y/Z: 300/160/340 mm >> Zvislá frézovacia hlava posuvná na konzole o 100 mm >> Vertikálne a horizontálne vreteno – SK40 >> Upínací systém S20x2 >> Hmotnosť cca 800 kg Príslušenstvo a vybavenie: >> 3-osový digitálny odpočet Heidenhain TNC113 >> Chladiace zariadenie >> Prevádzkový návod, zoznam náhradných dielov O stroji: Cedpfxeu Racre Alyegt Ponúka sa univerzálna frézka Deckel FP1, rok výroby 1984, vo výbornom stave. Stroj má minimálne vôle na kľukách a všetky vretená sa pohybujú ľahko. Aj pri maximálnych otáčkach beží frézka veľmi ticho. Pri tomto novšom modeli FP1 je posuv v troch osiach plynulo nastaviteľný, stroj má zároveň rýchloposuv v týchto osiach. Veľkou výhodou je aktívny 3-osový digitálny odpočet. S týmto Heidenhain systémom môžete zadať rozmery, ktoré stroj automaticky nastaví. Táto FP1 bola v školiacej dielni, kde bola využívaná iba príležitostne. Bol vykonaný servis – výmena oleja. Stroj je mechanicky aj elektricky skontrolovaný. Digitálne odpočty Heidenhain značne zjednodušujú a spresňujú prácu. Využite možnosť prezrieť a vyskúšať stroj osobne pod napätím priamo na mieste.

Stav: veľmi dobrý (použitý), Rok výroby: 1992, Funkcionalita: plne funkčný, Výbava: dokumentácia / manuál, F729 Universal Milling Machine Deckel FP1 with 3-Axis TNC 113 Heidenhain Digital Readout & Infinitely Variable Feed Very Good Condition Technical Specifications: >> Year of Manufacture: 1992 Machine No. 2102-6289 >> Fixed Angle Table (newly planed) >> Spindle Speed: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100 mm on spindle support >> Vertical and horizontal quill – ISO taper SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories & Equipment: >> 3-axis Heidenhain TNC113 digital readout >> Coolant system Cgedpeu T D Nrefx Alyjt >> Operating manual, spare parts list About the machine: Offered here is a Deckel FP1 universal milling machine, year 1992, in very good condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. With this newer FP1 model, the feed can be infinitely varied on all three axes, with rapid traverse also available on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain position control, you can enter values for the machine to automatically position itself. The FP1 was located in a training facility, where it was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take advantage of the opportunity to inspect and test the machine under power on site.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Výbava: dokumentácia / manuál, Universal Milling Machine Deckel FP1 with 3-axis active digital display Heidenhain TNC 111 2008 retrofit by FA Huttelmaier Very good condition Technical Data: >> Year of manufacture: 1985 Machine no. 2102-2891 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes Cgodpfx Aju Nvwvolyot >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X / Y / Z: 300 / 160 / 340 mm >> Vertical milling head can be moved 100 mm on spindle carrier >> Vertical quill and horizontal quill – SK40 >> Drawbar S20x2 >> Weight: approx. 800 kg Equipment and accessories: >> 3-axis digital display Heidenhain TNC 111 >> Coolant device >> Operating manual, spare parts list About the machine: For sale is a Deckel FP1 universal milling machine, year 1985, in very good condition. The FP1 was overhauled in 2008 by Huttelmaier. The machine has minimal play in the handwheels and all spindles move easily. Even at maximum speed, the milling machine runs very smoothly. On this newer FP1 model, the feed in all three axes is infinitely variable, and there is also rapid traverse in all axes. A major advantage is the active 3-axis digital display. This Heidenhain path control allows you to input dimensions, which the machine will approach automatically. The FP1 was located in a training workshop and only used occasionally. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to see and test this gem on site under power.

Stav: takmer ako nový (použitý), Rok výroby: 1987, Funkcionalita: plne funkčný, Výbava: dokumentácia / manuál, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Active Digital Display and Infinitely Variable Feed – Near Mint Condition Technical Data: >> Year of manufacture: 1987 Machine no.: 2102-3536 >> Fixed angular table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical quill and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: Cgodpou R D I Sofx Alyjt >> 3-axis Heidenhain TNC113 digital readout >> Electric central lubrication >> Machine lamp >> Coolant device >> Operating instructions, spare parts list About the Machine: Offered here is a Deckel FP1 universal milling machine, year 1987, in near mint original condition. The machine has very little backlash and all spindles move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. On this later FP1 model, the feed is infinitely variable in three axes; it also features rapid traverse in these axes. A major advantage is the active 3-axis digital display. With this Heidenhain control, you can enter coordinates that the machine will automatically approach. The FP1 was located in a training facility where it was only occasionally used. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more precise. Take advantage of the opportunity to view and test this gem under power on site.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Display TNC 113 Heidenhain and Infinitely Variable Feed, Light Grey, Excellent CONDITION Technical Specifications: >> Year of manufacture: approx. 1990, Machine No. 2102-5231 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle block by 100 mm >> Vertical and horizontal quill - SK40 taper >> Drawbar system M16 >> Weight approx. 800 kg Equipment and features: >> 3-axis digital readout Heidenhain TNC113 >> Electric central lubrication Cgjdpfx Ajxu E R Ijlyot >> Coolant system >> Operating manual, spare parts list About the machine: For sale is a Universal Milling Machine Deckel FP1 in very good condition in light grey. The machine has minimal backlash and all leadscrews move smoothly. Even at maximum speeds the milling machine runs smoothly and quietly. On this newer FP1 model, the feedrate is infinitely adjustable on all three axes, and the machine is also equipped with rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain traverse controller, you can input dimensions that the machine will approach automatically. The FP1 was located in a training workshop, where it was only occasionally used. An oil change has been carried out. Mechanically and electrically tested. Operation is made easier and even more precise thanks to the Heidenhain digital readout. Take advantage of the opportunity to inspect and test this gem under power on site. The machine is available immediately.

Stav: veľmi dobrý (použitý), Rok výroby: 1987, Funkcionalita: plne funkčný, Universal milling machine Deckel FP4M with 3-axis digital readout Heidenhain in special light grey paint, CE compliant! Technical Data: - Year of manufacture: 1987, Machine no. 2203-2790 - Fixed angle table (newly planed) - Speed: 50 – 2,500 rpm - Feed rate: 8 – 630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1,300 mm/min - Travel (X/Y/Z): 500/400/400 mm - Vertical milling head movable by 150 mm on the spindle carrier - Vertical and horizontal quill – SK40 - Vertical quill extendable by 90 mm - Drawbar system: M16 - Weight: approx. 1,500 kg Accessories and Equipment: - 3-axis digital readout (Heidenhain) - Coolant system - Chip tray - Central lubrication Codpfxexctyas Alysgt About the Machine: Offered is a universal milling machine Deckel FP4M, CE compliant, in very good condition. The machine is partially overhauled, with minimal backlash on the cranks, and all spindles move smoothly and evenly. Even at maximum spindle speeds, the milling machine runs quietly. Rapid traverse is available in all axes; all way covers are new. The fixed angle table has been newly planed. A reliable and user-friendly machine. An oil change has been performed. Mechanically and electrically checked. Working is made easier and more precise thanks to the Heidenhain digital readout. Take advantage of the opportunity to inspect and test the machine under power on site.

Stav: veľmi dobrý (použitý), Rok výroby: 1992, Funkcionalita: plne funkčný, Výbava: dokumentácia / manuál, Universal milling machine Deckel FP4MK with 3-axis Heidenhain digital readout, RAL 7035 light grey, in very good condition, CE compliant!!! Technical Data: >> Year of manufacture: 1992 Machine No.: 2203-8489 >> Fixed angle table >> Spindle speeds: 50 - 2500 rpm >> Feed range: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel distance X/Y/Z: 500/400/400 mm >> Vertical milling head adjustable on spindle carrier >> Vertical quill and horizontal quill - SK40 >> Vertical quill extendable by 90 mm >> Hydraulic drawbar system Cjdpfxsw Evq Ae Alyjgt >> Weight approx. 1,600 kg Accessories and Features: >> 3-axis active digital readout by Heidenhain >> Coolant system >> Swarf tray >> Centralized electric lubrication >> Operating manual, spare parts diagrams About the machine: For sale is a Deckel FP4MK universal milling machine in very good condition with CE conformity. The machine has very little play in the cranks, and all leadscrews move smoothly. The milling machine runs quietly even at maximum spindle speed. It is equipped with hydraulic tool clamping. On this newer FP4 model, the feed on all three axes is infinitely variable and each axis features rapid traverse. A major advantage is the active 3-axis digital readout. With this Heidenhain control, you can input dimensions that the machine will automatically target. An oil change has been performed; the machine has been mechanically and electrically inspected. Thanks to the Heidenhain digital readout, operation is easier and even more precise. Take the opportunity to view and test the machine under power at our site.

Stav: veľmi dobrý (použitý), Rok výroby: 1984, Funkcionalita: plne funkčný, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout in Special Light Grey Paint, CE Compliant!!! Technical Data: >> Year of manufacture: 1984 Machine no.: 2203-1429 >> Rigid angle table (freshly planed) >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel range X/Y/Z: 500/400/400 mm >> Vertical milling head on spindle support can be shifted by 150 mm >> Vertical quill and horizontal quill – ISO 40 (SK40) >> Vertical quill extendable by 90 mm >> Tool clamping system: M16 >> Weight approx. 1500 kg Accessories and equipment: >> 3-axis Heidenhain digital readout >> Coolant device >> Chip tray >> Central lubrication system About the machine: Csdpfx Aew N Sfvelyegt Offered is a Universal Milling Machine Deckel FP4M, CE compliant, in very good condition. The machine has been partially overhauled, has minimal backlash, and all spindles move smoothly and evenly. Even at maximum spindle speeds, the milling machine runs quietly. Rapid traverse in all axes, all bellows are as new. The rigid angle table has been recently planed. A reliable and user-friendly machine. Oil change has been carried out. Mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the machine under power on site.

Stav: použitý, číslo stroja/vozidla: 2810 - 4271, x-pozdĺžna os: 500 mm y-bočná os: 400 mm z-zvislá os: 450 (390) mm Rozmer upínacej plochy stola: 710 x 430 mm Max. otáčky vretena: 40 - 4000 ot./min Rozsah posuvu: 10–2000 mm/min Rýchloposuv: 4,0 m/min Výkon pohonu vretena: 4,0 kW Upínanie nástrojov: SK40 Cedeh Ra Izjpfx Alyegt Ovládanie: CNC Contour 3 Celkový výkon pohonu: 9 kW Hmotnosť stroja cca: 2 t Priestorové nároky cca: 2,4 x 2,3 x 2,3 m Univerzálna CNC obrábacia frézka s riadením Contour 3, prípravou pre štvrtú os, plynulo nastaviteľnými otáčkami a posuvmi, otočnou vertikálnou frézovacou hlavou +/-130°, pevným uhlovým stolom, 20-pozíciovým meničom nástrojov, hydraulickým upínaním nástrojov, automatickým centrálnym mazacím systémom, prenosným ovládacím pultom s odnímateľným ručným ovládačom, zariadením na chladenie/mazanie s oddelenou nádržou na chladiacu kvapalinu, ochranným krytom proti striekaniu s pracovným osvetlením pracovného priestoru, samostatným rozvádzačom so systémovým hlavným bezpečnostným vypínačom, bezpečnostným núdzovým stop tlačidlom na ovládacom pulte, držiakom na náradie a výmennou pozíciou nástrojov, kompaktným dizajnom, stroj vo veľmi dobrom stave.

Stav: pripravené na použitie (použité), Deckel Maho 5100027000 dotykový panel pro Deckel Maho CNC 432 řízení, sériové číslo dle fotografie, použité, běžné známky používání, 100% funkční, rozsah dodávky dle fotografií Csdpsi D Upgofx Alysgt

Stav: dobrý (použitý), Funkcionalita: plne funkčný, DECKEL FP1 Aktiv Milling Machine Manufacturer: Deckel Model: FP1 Aktiv Condition: very good Type of control: conventional Control system: Aktiv HEIDENHAIN TNC X-travel: 300 mm Cedpfx Aljxnniajyjgt Y-travel: 160 mm Z-travel: 340 mm Tool holder: SK40 Spindle speed: 40–2000 rpm Control system: Aktiv HEIDENHAIN TNC Total power requirement: 2 kW Machine weight: approx. 0.73 t Space requirements (LxWxH): approx. 1200x1100x1600 mm

Stav: dielensky repasované (použité), Rok výroby: 1989, Dear Sir or Madam, For sale is a partially overhauled Deckel FP1 with 3-axis Heidenhain TNC113 active control, renowned for its particularly user-friendly operation. This later model from 1989 is equipped, among other features, with central lubrication, an electric coolant pump, and a machine lamp. The machine has undergone a thorough partial overhaul in our workshop and is therefore in excellent condition, which you are welcome to inspect on site. Cgodspy Eldopfx Alyet Delivery time: on request Machine No.: 2102-xxxx Table: fixed angle table or swiveling rotary table Travel paths: X 300 mm / Y 160 mm / Z 340 mm Quill travel: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool holder: SK40 Feed: stepless 5–500 mm/min Rapid traverse: 1200 mm/min Features and accessories: 3-axis digital readout Heidenhain TNC113 with active control, stepless feed regulation in all 3 axes, coolant system, centralised lubrication, technical documentation, leveling feet, safety features (optional) Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly checked - All lubricants and, where necessary, worn parts are replaced in advance - Upon request, we will completely or partially overhaul your selected machine - Upon request, you can order additional accessories such as tools directly - Upon request, we can also mount further equipment such as safety devices directly - We are happy to take care of shipping and/or installation

Stav: pripravené na použitie (použité), pojazdová vzdialenosť osi X: 300 mm, zdvih osi Y: 160 mm, zdvih osi Z: 340 mm, maximálna rýchlosť vretena: 2 000 ot./min, otáčky vretena (min.): 40 ot./min, poloha frézovacej hlavy: SK40, vstupné napätie: 400 V, Deckel FP1 2-osový Active Posuvy: X = 300 mm Y = 160 mm Z = 340 mm Otáčky vřetena 40-2000 ot./min Automatický posuv a rychloposuv na osách X, Y a Z. Plynule nastavitelné. Rozměr stolu 600 x 260 mm 2osé Aktivní řízení, řízení bod od bodu. 3osý digitální odpočet Heidenhain. Csdpfx Aovuzg Aolyegt Upínání vřetena SK40 Deckel (vnější závit)

Rok výroby: 1987, stav: pripravené na použitie (použité), K dispozícii sú tri staré frézky Hermle a Deckel. 1) Horizontálna frézka Hermle FW 801, uchytenie nástroja: SK40, pojazd X/Y/Z: 430mm/150mm/420mm, otáčky: 2000 ot./min, rozmery stroja X/Y/Z: cca 2250mm/1700mm/1500mm, hmotnosť: cca 1000kg. 2) Univerzálna frézka Hermle FW 710, uchytenie nástroja: SK30, rozmery stola X/Y: 710mm/190mm, pojazd X/Y/Z: 400mm/150mm/350mm, otáčky: 2240 ot./min, rozmery stroja X/Y/Z: cca 1500mm/1000mm/1800mm, hmotnosť: cca 700kg. 3) Deckel FP 2, rok výroby: 1987, uchytenie nástroja: SK40, pojazd X/Y/Z: 300mm/220mm/400mm, rozmery stola X/Y: 620mm/390mm, max. zaťaženie stola: 250kg, otáčky: 3150 ot./min, posuv: 3600mm/min, rýchloposuv: 4000mm/min, rozmery stroja X/Y/Z: cca 2500mm/2100mm/1800mm, hmotnosť: cca 1250kg, riadenie: Heidenhain TNC 355. Obhliadka na mieste je možná. Predaj po kusoch možný, prednosť má však balíkový predaj. Cgjdpfx Alsy I Adhoyot

Stav: pripravené na použitie (použité), Deckel FP 2 NC universal milling machine TNC 320 / 321 Travel distances: x - 300 mm | y - 300 mm | z - 400 mm Stepless speed range: 31.5 - 5000 rpm Feeds: 2-4000/min Rapid traverse: 4000/min Tool holder: SK 40 Quill stroke: 80 mm Machine weight: 1350 kg You are welcome to visit for an inspection. We are happy to organize an affordable shipping service for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and discover our other offers. The specified company names and trademarks are the property of their respective owners and are used only for identification and description of the products. Technical data may deviate and errors in the item description may occur; these are reserved. Cedpfx Ajxfkm Aolysgt

Stav: dobrý (použitý), Rok výroby: 1962, Spindle mount, vertical + horizontal SK / ISO 40 Angular table clamping surface: 700 x 285 mm Travel paths: X-axis: 500 mm Y-axis: 200 + approx. 250 mm Z-axis: 400 mm Quill stroke: approx. 80 mm 18 main spindle speeds: 40 - 2000 rpm 18 feed rates: 8 - 400 mm/min Rapid traverse: 1200 mm/min Drive power: 2.2 kW Cgodpfx Aem Uygvjlyst Dimensions (L x W x H): 1150 x 1050 x 1650 mm Machine weight: 1000 kg Accessories / Special Features: • Vertical milling head, swiveling left/right • Fixed angular clamping table • Feed and rapid traverse in all axes Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Stav: veľmi dobrý (použitý), Rok výroby: 2000, Funkcionalita: plne funkčný, Technické údaje Posuv v osi X 300 mm Posuv v osi Y 160 mm Posuv v osi Z 290 mm Plocha stola 600 x 210 mm Upínanie nástroja SK 40 Otáčky vretena (16) 40 - 2000 ot./min Plynulé posuvy 5 - 500 mm/min Rýchloposuv 1,2 m/min Pohon vretena 1,5 / 1,9 kW Celkový príkon 9,5 kVA Hmotnosť stroja cca 830 kg Priestorové nároky cca 2000 x 2200 x 1655 mm Dodatočné informácie Cedpey Idfmsfx Alysgt Stroj je vo veľmi dobrom stave a pochádza z výučbového strediska. Výbava: * 3-osé polohovacie riadenie s aktívnym digitálnym ukazovateľom Heidenhain TNC 123 - Manuálny režim: ručná prevádzka a polohovanie s ručným zadaním - Automatický režim: krokové spúšťanie programu, vkladanie programov * Pevný uhlový stôl * Posuvná zvislá frézovacia hlava, natáčanie +/- 90°, posuv pinoly 60 mm * Chladiace zariadenie * Centrálne mazanie * Protipodpera s protiuložením * Tlmiace nožičky * Dokumentácia

Stav: pripravené na použitie (použité), Nástrojová frézka DECKEL FP 2 z výučbového zariadenia - Udržiavaný originálny stav - Pojazdové dráhy X/Y/Z 400x200x400 mm - Digitálny ukazovateľ 3-osí "NOVÝ" - Sklopný stôl - upínacia plocha stola 700x350 mm - Rozsah otáčok 40 - 2000 ot./min - Automatické posuvy / rýchloposuvy vo všetkých troch osiach - Držiak nástrojov ISO 40 - Vertikálne / horizontálne frézovanie - Vertikálna hlava naklápateľná s vŕtacou pinolou - Zariadenie na chladenie - Matica vretena osy X "NOVÁ" - Strojná noha - Rôzne držiaky na nástroje - Ochranný kryt na triesky na nohe stola - Dokumentácia Rozmery: D x Š x V 1,5 x 1,7 x 1,8 metra / hmotnosť: 1500 kg Cgsdpjx Hyuhefx Alyjt Možné chyby a preklepy vyhradené.

Stav: pripravené na použitie (použité), Rok výroby: 1995, Ihneď k dispozícii zo skladu: CNC nástrojová frézka Deckel Typ FP 5 – 80 Rok výroby: 1995 Cgedsy I N T Nepfx Alyet CNC riadenie Dialog 12 Univerzálny stôl: 750 x 520 mm Pojezdy osi X / Y / Z: 800/ 550 / 500 mm Výkon pohonu: 9 kW Výsun pinoly: 80 mm Elektronické ručné koliesko Otáčky vretena: 32 – 5000 ot./min Posuvy: 0 – 6000 mm/min Hmotnosť: 4,5 t Cena: 2.750 eur – bez DPH, zo skladu

Stav: pripravené na použitie (použité), Nástrojárska frézka / DECKEL FP 2 s 3-osým digitálnym odpočtom Heidenhain ND 780 - Pracovné posuvy X/Y/Z: 450x230x400 mm - Automatické posuvy/rýchloposuvy vo všetkých 3 osiach - 3-osý digitálny odpočet Heidenhain ND 780 - Rozsah otáčok: 40–2000 ot./min - Univerzálny naklápací/otočný stôl - Horizontálne/vertikálne frézovacie zariadenie s vertikálnou posuvnou hlavou - Upínanie náradia ISO 40 - Chladiace zariadenie - Vanička na triesky - Rôzne upínače nástrojov a klieštiny - Dokumentácia Rozmery: DxŠxV 1,5x1,7x1,8 metra / Hmotnosť 1600 kg Zmena a chyby vyhradené Cgedjy Ipgijpfx Alyjt

Stav: dobrý (použitý), Nástrojová frézka DECKEL FP 33 vrátane 3-osového digitálneho odpočtu / Heidenhain - Trojosový digitálny odpočet Heidenhain - Technický dátový list viď obrázok Cgsdsy Efyajpfx Alyst - Rôzne príslušenstvo - Žeriav - Dokumentácia Rozmery: DxŠxV 2x5x2x2,8 metra / hmotnosť 4500 kg Možnosť výskytu chýb a preklepov vyhradená.

Stav: dielensky repasované (použité), Rok výroby: 1975, Funkcionalita: plne funkčný, 3-osá digitálna indikácia FAGOR Rok výroby: 1975 Pojazd: X 500 Y 200 Z 400 Rozsah otáčok: 40 – 2000 ot./min S nasledujúcim príslušenstvom: Univerzálny stôl 660 x 380 mm upínacia plocha Vertikálna frézovacia hlava Výsuvné vŕtacie vreteno Ochranný kryt frézy Strojové osvetlenie Rôzne držiaky nástrojov SK 40 Vanička na triesky Chladiace zariadenie 4 ks strojových nôh Návod na obsluhu Cjdpfx Aljyw H Eujyjgt STROJ JE VO VEĽMI DOBROM STAVE !!!

Stav: takmer ako nový (použitý), pozdĺžny posuv (x): 300 mm tvárny posuv (y): 220 mm zvislý posuv (z): 400 mm pracovná plocha: 620 x 390 mm otáčky vretena: 31 - 3150 ot./min rozsah posuvu: 1 - 3600 mm/min rýchloposuv: 4000 mm/min Cgsdpfx Aeh Ty Hkjlyot

Stav: dobrý (použitý), Upínacia plocha pevného uhlového stola: 195 x 605 mm Cedpfxjyvgf Rj Alyogt Pozdĺžny/vertikálny pohyb stola automaticky a ručne: 290/300 / 330/340 mm Ručný priečny pohyb vretienkovej hlavy: 150 mm Upínanie vretena: ISA 40 16 rýchlostí vretena: 40 - 2000 ot./min 16 posuvov: 10 - 500 mm/min Motor pohonu vretena: 380 V, 1/1,4 kW Hmotnosť cca: 660 kg Potrebný priestor: 1200 x 900 x 1570 mm