Deckel Lk kúpiť použité (674)

Stav: veľmi dobrý (použitý), Rok výroby: 1978, Funkcionalita: plne funkčný, Universal milling machine Deckel FP1 with 3-axis K&C digital display, stepless feed in light grey, excellent condition Technical data: >> Year of manufacture: 1978, Machine no. 2101-0465 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Stepless feed on 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Rapid traverse >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be shifted 100 mm on spindle carrier >> Vertical quill and horizontal quill - ISO 40 taper >> Drawbar system S20x2 >> Weight approx. 700 kg Accessories and equipment: Bdedet Aav Ijpfx Afaek >> 3-axis digital display K&C, newly installed with manufacturer’s warranty and operating manual. Display unit: Set reference points and zero points, enter coordinates, mm/inch switch, absolute and incremental coordinates, circular functions, hole array, radius milling functions, etc. >> Coolant system About the machine: A Deckel FP1 universal milling machine in very good condition is being offered. The machine has very little play in the cranks and all spindles move smoothly. All bellows are new. On this newer FP1 model, the feed is steplessly adjustable in two axes; the machine also has rapid traverse. An oil change has been performed. Mechanically and electrically tested. The new K&C digital display makes working easier and more precise. Take the opportunity to view and test this machine under power on site.

Stav: dobrý (použitý), Rok výroby: 2005, Funkcionalita: plne funkčný, Technical details X travel: 1040 mm Y travel: 600 mm Bjdpfxsxwuu Ie Afaodk Z travel: 500 mm Control: Heidenhain iTNC 530 Table size: 1250 x 600 mm Table load capacity: 600 kg Tool holder: SK 40 Spindle speeds: 1 - 8,000 rpm Spindle torque (S1/S6): 140/200 Nm Feed rate: 40,000 mm/min Rapid traverse (X and Z axes): 70 m/min Rapid traverse (Y axis): 40 m/min Spindle motor (100/40% duty cycle): 13/19 kW Total power requirement: 39 kVA Machine weight approx.: 8.9 t Additional information Power-on hours: 70,278 Spindle hours: 23,335 Please note the attached geometry measurement protocol with the tool drawbar force test. Equipment: - CNC path control Heidenhain iTNC 530 - Electronic handwheel Heidenhain HR 410 - Motor spindle with increased torque - Direct measuring system in Y and Z axes - Prepared for probe systems - 30-position tool changer, tool diameter 100/140 mm, length 300 mm, weight 7 kg - ROTOCLEAR - Production package 2 - Internal coolant supply through the spindle, 20 bar - Coolant system with paper band filter - Air blast cooling via spindle center selectable via M function - Chip conveyor - Bed flushing - Linear drive in X axis - Operation mode 4: program check with extended manual intervention - Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Stav: dobrý (použitý), Univerzálny stôl DECKEL, plocha stola 800 x 380 mm Bdedjxvxfhjpfx Afaek 8 drážok typu T, stav podľa fotografií.

Stav: dobrý (použitý), Rok výroby: 1976, Deckel FP1 nástrojová frézka, pevný uhlový stôl, upínanie vretena SK 40. Brzda vretena, príslušenstvo: protidržiak, rôzne upínacie puzdrá. Dobrý prevádzkyschopný stav. Po dohode možné predviesť pod prúdom. Bsdpfxjxw T Efe Afaodk

Stav: použitý, Univerzálna frézka DECKEL FP1 Posuv X: 300 mm Posuv Y: 150 mm Posuv Z: 300 mm Bdjdpfxoxyymbs Afaek Horizontálne aj vertikálne vreteno Otáčky vretena: od 40 do 2000 ot./min. Horizontálne naklápateľná hlava Motor vretena: 2 rýchlosti Motor: 1,5 kW Posuvy: X - Z automatické / Y ručne Dodávané bez stola, iba s jedným 4-čeľusťovým súosovým skľučovadlom Ø 140 mm Napätie: 380 V Šírka: 1200 mm Hĺbka: 1200 mm Celková výška: 1600 mm Hmotnosť: cca 900 kg

Stav: dielensky repasované (použité), Rok výroby: 1984, Univerzálna nástrojárska frézka DECKEL FP 3 So 3-osovým aktívnym digitálnym odpočtom Heidenhain TNC 11 Rok výroby: 1984 Posuv: X 500 Y 300 Z 400 mm Rozsah otáčok: 25 – 2500 ot/min Bodpfexuh Rdox Afajdk S nasledujúcim príslušenstvom: Pevný uhlový stôl 850 mm x 400 mm upínacia plocha Naklápací otočný stôl Ø 450 mm s deliacimi kotúčmi Hlava na strihanie Posuvná zvislá frézovacia hlava Vysúvateľná vŕtacia pinola Plynulý posuv cez potenciometer Rôzne frézovacie tŕne SK 40 / S22 x 2 Vanička na triesky Automatické centrálné mazané čerpadlo pre osi X, Y, Z Strojové svietidlo Chladiace zariadenie 4 ks strojových nôh Návod na obsluhu

Stav: veľmi dobrý (použitý), Rok výroby: 1985, Funkcionalita: plne funkčný, Universalná frézka Deckel FP1 s 3-osovým digitálnym odpočtom K&C (novinka) a plynulým posuvom v 3 osiach, vo vynikajúcom stave Technické údaje: >> Rok výroby: 1985, výrobné číslo: 2102-2867 >> Otočno-sklopný stôl (nový hobľovaný) >> Otáčky: 40 – 2000 ot./min >> Plynulý posuv v 3 osiach >> Rýchloposuv v 3 osiach >> Výkon pohonu: 1,5 / 1,9 kW >> Brzda vretena >> Pojezdy X/Y/Z: 300/160/340 mm >> Vertikálna hlava posuvná na stojane 100 mm >> Vertikálna a horizontálna pinola – SK40 >> Upínací systém M16 >> Hmotnosť cca 800 kg Príslušenstvo a výbava: >> 3-osý digitálny odpočet K+C, novo namontovaný, s výrobnou zárukou a návodom na obsluhu. Bdsdst Aarpspfx Afaek Odpočtová jednotka: Referenčné body, nastavenie nulových bodov, zadávanie súradníc, prepínanie mm/palec, absolútne alebo inkrementálne súradnice, kruhové funkcie, radenie otvorov, funkcie frézovania rádiusov a pod. >> Chladiace zariadenie >> Návod na obsluhu, zoznam náhradných dielov Informácie o stroji: Na predaj je univerzálna frézka Deckel FP1, rok výroby 1985, vo vynikajúcom stave. Stroj má minimálnu vôľu na kľukách a všetky vretená sa pohybujú ľahko. Dokonca aj pri najvyšších otáčkach beží frézka veľmi ticho. Pri tomto novšom modeli FP1 je posuv v troch osiach plynule nastaviteľný, navyše stroj disponuje rýchloposuvom vo všetkých týchto osiach. Bola vykonaná výmena oleja. Mechanicky aj elektricky skontrolované. Nová digitálna odpočtová jednotka K&C podstatne uľahčuje a spresňuje prácu. Využite príležitosť pozrieť si stroj naživo pod prúdom a vyskúšať si ho.

Stav: pripravené na použitie (použité), Rok výroby: 1996, prevádzkové hodiny: 23 198 h, Riadiaca jednotka Značka: DECKEL MAHO Model: Millplus V400 Bdodoxr Rztjpfx Afaek Hlavný pohon Počet osí: 3 Toto trojosové vertikálne obrábacie centrum DECKEL MAHO DMU 60T bolo vyrobené v roku 1996. Disponuje meničom nástrojov na 24 pozícií, NC otočným stolom a rýchlosťou vretena až 6300 ot./min. Pracovné priestory majú rozmery 600 mm (dĺžka), 525 mm (šírka) a 500 mm (výška). Je vybavené chladiacim systémom s objemom 150 litrov. Neváhajte a zvážte kúpu tohto vertikálneho obrábacieho centra DECKEL MAHO DMU 60T. Kontaktujte nás pre viac informácií o tomto stroji. Typy aplikácií Frézovanie

Stav: použitý, Funkcionalita: plne funkčný, Brúska Friedrich Deckel Typ S1 V dobrom stave Bdedjxzpq Sspfx Afajk

Stav: takmer ako nový (použitý), Rok výroby: 2011, Funkcionalita: plne funkčný, Universal milling machine Deckel FP1 repowered by FPS, year 2010, equipped with 3-axis Heidenhain ND 780 digital readout, as new condition!! Technical data: - Machine no.: 2101-51084, year 2011 Bodpfswpi Dqjx Afaedk - Fixed angular table - Spindle speed: 40 - 2000 rpm - Feed on 2 axes - Drive power: 1 / 1.5 kW - Travel X/Y/Z: 300/150/340 mm - Vertical quill SK40 and horizontal quill SK40 - Drawbar system S20x2 - Weight approx. 700 kg Accessories and features: - 3-axis Heidenhain ND 780 digital display - Hydraulic vise - Collets - Tool holders - Milling cutters - Operating manual - Coolant system About the machine: For sale is a universal milling machine Deckel FP1, repowered by FPS, in excellent, like-new condition. The accessories include a hydraulic vise with rotary base, collets, tool holders, and milling cutters. The machine has been mechanically and electrically inspected. The Heidenhain digital readout greatly facilitates and enhances precision during operation. Take advantage of the opportunity to inspect and test the Deckel machine under power on site. The machine is immediately available.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Výbava: dokumentácia / manuál, Universal milling machine Deckel FP1 with 3-axis digital readout RSF 2006 Fully Refurbished TOP CONDITION Technical Data: >> Machine No. 53819/08 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical and horizontal quill - SK40 Bdsdpfsvb Ud Uox Afask >> Spindle brake >> Drawbar system S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout by RSF Elektronik >> Coolant system >> Machine mounts About the Machine: Offered here is a universal milling machine Deckel FP1 in excellent condition. The Deckel shows minimal backlash and all feeds run smoothly. An oil change has been performed. The FP1 was completely overhauled by Huttelmaier in 2006 and has seen only minimal use since then. The RSF digital readout makes operation easier and even more precise. Take advantage of the opportunity to inspect and test the machine under power on-site.

Stav: veľmi dobrý (použitý), Rok výroby: 1984, Funkcionalita: plne funkčný, Výbava: dokumentácia / manuál, Univerzálna frézka Deckel FP1 s aktívnym 3-osovým digitálnym odpočtom Heidenhain TNC 113 a plynulým posuvom – vynikajúci stav Technické údaje: >> Rok výroby: 1984, výrobné číslo: 2102-2601 >> Otočný/naklápací/stolček >> Otáčky: 40 – 2000 ot./min >> Plynulý posuv v 3 osiach >> Rýchloposuv v 3 osiach >> Výkon pohonu: 1,5 / 1,9 kW >> Vretenová brzda >> Pojezdy X/Y/Z: 300/160/340 mm >> Zvislá frézovacia hlava posuvná na konzole o 100 mm >> Vertikálne a horizontálne vreteno – SK40 >> Upínací systém S20x2 >> Hmotnosť cca 800 kg Príslušenstvo a vybavenie: >> 3-osový digitálny odpočet Heidenhain TNC113 Bodpou Racrjfx Afaodk >> Chladiace zariadenie >> Prevádzkový návod, zoznam náhradných dielov O stroji: Ponúka sa univerzálna frézka Deckel FP1, rok výroby 1984, vo výbornom stave. Stroj má minimálne vôle na kľukách a všetky vretená sa pohybujú ľahko. Aj pri maximálnych otáčkach beží frézka veľmi ticho. Pri tomto novšom modeli FP1 je posuv v troch osiach plynulo nastaviteľný, stroj má zároveň rýchloposuv v týchto osiach. Veľkou výhodou je aktívny 3-osový digitálny odpočet. S týmto Heidenhain systémom môžete zadať rozmery, ktoré stroj automaticky nastaví. Táto FP1 bola v školiacej dielni, kde bola využívaná iba príležitostne. Bol vykonaný servis – výmena oleja. Stroj je mechanicky aj elektricky skontrolovaný. Digitálne odpočty Heidenhain značne zjednodušujú a spresňujú prácu. Využite možnosť prezrieť a vyskúšať stroj osobne pod napätím priamo na mieste.

Stav: veľmi dobrý (použitý), Rok výroby: 1992, Funkcionalita: plne funkčný, Výbava: dokumentácia / manuál, F729 Universal Milling Machine Deckel FP1 with 3-Axis TNC 113 Heidenhain Digital Readout & Infinitely Variable Feed Very Good Condition Technical Specifications: Bdodpfx Afeu T D Nreajk >> Year of Manufacture: 1992 Machine No. 2102-6289 >> Fixed Angle Table (newly planed) >> Spindle Speed: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100 mm on spindle support >> Vertical and horizontal quill – ISO taper SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories & Equipment: >> 3-axis Heidenhain TNC113 digital readout >> Coolant system >> Operating manual, spare parts list About the machine: Offered here is a Deckel FP1 universal milling machine, year 1992, in very good condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. With this newer FP1 model, the feed can be infinitely varied on all three axes, with rapid traverse also available on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain position control, you can enter values for the machine to automatically position itself. The FP1 was located in a training facility, where it was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take advantage of the opportunity to inspect and test the machine under power on site.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Výbava: dokumentácia / manuál, Universal Milling Machine Deckel FP1 with 3-axis active digital display Heidenhain TNC 111 2008 retrofit by FA Huttelmaier Very good condition Technical Data: >> Year of manufacture: 1985 Machine no. 2102-2891 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake Bdsdpfsu Nvwvox Afaok >> Travel X / Y / Z: 300 / 160 / 340 mm >> Vertical milling head can be moved 100 mm on spindle carrier >> Vertical quill and horizontal quill – SK40 >> Drawbar S20x2 >> Weight: approx. 800 kg Equipment and accessories: >> 3-axis digital display Heidenhain TNC 111 >> Coolant device >> Operating manual, spare parts list About the machine: For sale is a Deckel FP1 universal milling machine, year 1985, in very good condition. The FP1 was overhauled in 2008 by Huttelmaier. The machine has minimal play in the handwheels and all spindles move easily. Even at maximum speed, the milling machine runs very smoothly. On this newer FP1 model, the feed in all three axes is infinitely variable, and there is also rapid traverse in all axes. A major advantage is the active 3-axis digital display. This Heidenhain path control allows you to input dimensions, which the machine will approach automatically. The FP1 was located in a training workshop and only used occasionally. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to see and test this gem on site under power.

Stav: takmer ako nový (použitý), Rok výroby: 2010, Funkcionalita: plne funkčný, Universal Milling Machine Deckel FP1 repowered by FPS, year of manufacture 2010 with 3-axis Heidenhain ND 780 DRO – As new condition! Technical Data: >> Machine no. 55249/08, year of manufacture 2010 >> Fixed angle table >> Spindle speed: 40 – 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar system S20x2 >> Weight approx. 700 kg Equipment and Accessories: >> 3-axis digital readout Heidenhain ND 780 >> Hydraulic vice >> Collets >> Tool holders >> Cutters >> Operating manual >> Coolant system About the machine: Bedpfexu Hbhjx Afajdk For sale is a Universal Milling Machine Deckel FP1 repowered by FPS in like-new condition. Included accessories are hydraulic vice with rotary base, collet chuck, tool holders, and cutters. Mechanically and electrically inspected. The Heidenhain DRO ensures easier and more precise operation. Take the opportunity to visit and test the machine under power on site. The machine is available immediately.

Stav: veľmi dobrý (použitý), Rok výroby: 1979, Funkcionalita: plne funkčný, Univerzálna frézka Deckel FP2 s 3-osým aktívnym digitálnym odpočtom Heidenhain TNC 113 a plynulým posuvom vo vynikajúcom stave Technické parametre: >> Rok výroby: 1979, výrobné číslo 2202-10777 >> Pevný uhlový stôl (novorezkaný) >> Otáčky: 25 - 2500 ot/min >> Plynulý posuv v 3 osiach >> Rýchloposuv v 3 osiach Bodpfx Afjuc Ubwsaedk >> Výkon motora: 2,2 kW >> Vretenová brzda >> Pohyb v osiach X/Y/Z: 400/220/400 mm >> Vertikálna frézovacia hlava nastaviteľná na stojane o 150 mm >> Výsuvné vertikálne a horizontálne vreteno - SK40 >> Závit upínania S20x2 >> Hmotnosť cca 1 400 kg Príslušenstvo a výbava: >> 3-osý aktívny digitálny odpočet Heidenhain TNC 113 >> Chladiace zariadenie >> Centrálne mazanie O stroji: Ponúkaná je univerzálna frézka Deckel FP2 vo veľmi dobrom stave. FP2 pochádza z laboratória štátneho podniku, kde bola používaná len obmedzene. Stroj má zanedbateľnú vôľu v kľukách a všetky vretená je možné ľahko ovládať. Frézka pracuje ticho aj pri najvyšších otáčkach. Pri tomto novšom modeli FP2 je posuv v troch osiach plynulo nastaviteľný, stroj má rýchloposuv v každej osi. Veľkou výhodou je aktívny 3-osý digitálny odpočet. Pomocou tohto Heidenhain riadiaceho systému môžete zadať rozmery, do ktorých stroj automaticky najazdí. Bol vykonaný výmenný oleja. Stroj je mechanicky i elektricky skontrolovaný. Digitálny odpočet Heidenhain výrazne zjednodušuje a spresňuje prácu. Využite možnosť prezrieť a vyskúšať si tento stroj priamo na mieste pod napätím.

Stav: takmer ako nový (použitý), Rok výroby: 1987, Funkcionalita: plne funkčný, Výbava: dokumentácia / manuál, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Active Digital Display and Infinitely Variable Feed – Near Mint Condition Technical Data: >> Year of manufacture: 1987 Machine no.: 2102-3536 Bdjdpfx Asu R D I Ssfask >> Fixed angular table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical quill and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis Heidenhain TNC113 digital readout >> Electric central lubrication >> Machine lamp >> Coolant device >> Operating instructions, spare parts list About the Machine: Offered here is a Deckel FP1 universal milling machine, year 1987, in near mint original condition. The machine has very little backlash and all spindles move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. On this later FP1 model, the feed is infinitely variable in three axes; it also features rapid traverse in these axes. A major advantage is the active 3-axis digital display. With this Heidenhain control, you can enter coordinates that the machine will automatically approach. The FP1 was located in a training facility where it was only occasionally used. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more precise. Take advantage of the opportunity to view and test this gem under power on site.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Display TNC 113 Heidenhain and Infinitely Variable Feed, Light Grey, Excellent CONDITION Technical Specifications: Bodpfxexu E R Ij Afasdk >> Year of manufacture: approx. 1990, Machine No. 2102-5231 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle block by 100 mm >> Vertical and horizontal quill - SK40 taper >> Drawbar system M16 >> Weight approx. 800 kg Equipment and features: >> 3-axis digital readout Heidenhain TNC113 >> Electric central lubrication >> Coolant system >> Operating manual, spare parts list About the machine: For sale is a Universal Milling Machine Deckel FP1 in very good condition in light grey. The machine has minimal backlash and all leadscrews move smoothly. Even at maximum speeds the milling machine runs smoothly and quietly. On this newer FP1 model, the feedrate is infinitely adjustable on all three axes, and the machine is also equipped with rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain traverse controller, you can input dimensions that the machine will approach automatically. The FP1 was located in a training workshop, where it was only occasionally used. An oil change has been carried out. Mechanically and electrically tested. Operation is made easier and even more precise thanks to the Heidenhain digital readout. Take advantage of the opportunity to inspect and test this gem under power on site. The machine is available immediately.

Stav: dobrý (použitý), Rok výroby: 1977, Funkcionalita: plne funkčný, Deckel S0E Pantograph Cutter Grinder with Accessories Technical Data: >> Machine No.: SOE 77-3997, Year of manufacture: 1977 >> Drive motor speed: 2800 rpm >> Grinding spindle speed: 4500 rpm >> Power output: 0.55 kW / 380 Volt >> Weight: approx. 200 kg Accessories and features: >> Collets >> Grinding wheels Bdodpewrm Nvjfx Afaok >> Machine stand / base >> Dressing device >> Tools >> Grinding dust extraction unit About the machine: Offered here is a Deckel SOE pantograph cutter grinder complete with accessories. The machine has been mechanically and electrically tested. A neat and fully functional machine. Take the opportunity to view and test this machine under power on site.

Stav: veľmi dobrý (použitý), Rok výroby: 2002, Funkcionalita: plne funkčný, Universal tool grinding machine Michael Deckel S11 speed, year of manufacture 2002, excellent condition!! Technical Data: >> Year of manufacture: 2002 >> Serial No.: 2197 Clamping Range: >> Clamping surface of the tool slide: 500 x 180 mm >> Max. tool diameter between centers: 130 mm >> Max. tool length between centers: 270 mm >> T-slot width in machine base: 12 mm Travel Range: >> Working travels: Grinding stroke: 190 mm Grinding stroke for spiral grinding: 190 mm Cross movement of tool slide: 100 mm Vertical adjustment of grinding head: 325 mm Longitudinal adjustment of grinding spindle: 5 mm >> Coarse adjustment travels: Tool carrier: 220 mm Grinding head carrier: 800 mm >> Swivel angles: Grinding head carrier: 360 degrees Grinding head: 360 degrees Tool carrier: 360 degrees Grinding Spindle: Three-phase drive motor: 1.1 kW at 2800 rpm Spindle speeds, stepless: 2000 to 12000 rpm Max. grinding wheel diameter: 125 mm Max. cutoff wheel diameter: 200 mm Bdedpfewrnf Ejx Afask Dimensions: Weight: 520 kg Dimensions (Depth x Width x Height): 800 x 1100 x 1760 mm Required space (including operation): 2.5 x 2.3 m Accessories and Equipment: >> See pictures About the machine: Offered is a universal tool grinding machine from the brand Michael Deckel S11 speed. The machine is suitable for grinding high-precision parts. With the S11, single pieces and small batches can be ground astonishingly quickly, economically and flexibly, all while maximizing operating comfort. The Deckel S11speed is in excellent condition, both mechanically and electrically tested. Take the opportunity to inspect and test this machine under power on site.

Stav: veľmi dobrý (použitý), Rok výroby: 1992, Universal Tool Grinder Michael Deckel S11 – Excellent Condition!! Technical Specifications: >> Year of manufacture: 1992 >> Serial No.: 1651 Clamping Range: >> Table size of tool slide: 500 x 180 mm >> Max. tool diameter between centers: 130 mm >> Max. tool diameter for cantilevered setup in universal dividing head: 620 mm >> Max. tool length between centers: 270 mm >> T-slot size, machine base: 12 mm >> T-slot size, grinding head, tool slide, and accessories: 8 mm Movement Range: >> Working travel -- Grinding stroke: 190 mm -- Grinding stroke (helix grinding): 190 mm -- Cross movement of tool slide: 100 mm -- Vertical movement of grinding head: 325 mm -- Longitudinal adjustment of grinding spindle: 5 mm >> Coarse setting paths -- Tool support: 220 mm -- Grinding head support: 800 mm -- Universal dividing head on tool slide: 330 mm >> Swivel angles: -- Grinding head support: 360° -- Grinding head: 360° -- Tool support: 360° Grinding Spindle: Bdjdpsm E T Anefx Afask -- Three-phase drive motor: 1.1 kW at 2800 rpm -- Spindle speeds, stepless: 2000 to 10000 rpm -- Max. grinding wheel diameter: 125 mm -- Max. cut-off wheel diameter: 200 mm Dimensions: Weight: 520 kg Dimensions (D x W x H): 800 x 1100 x 1760 mm Required space (including operation): 2.5 x 2.3 m Accessories and Equipment: >> Optoelectronic measuring device with microscope and digital display >> Radius grinding fixture SK40 >> Handwheel attachment for tool slide >> Extraction unit >> Machine lamp About the machine: Offered here is a universal tool grinding machine from Michael Deckel, model S11. This machine is suitable for grinding high-precision parts. With the S11, single parts and small batches can be ground remarkably quickly, economically, and flexibly, all with the highest level of operating comfort. The Deckel S11 is in excellent condition. Mechanically and electrically tested. Take the opportunity to view and test this machine under power on site.

Stav: veľmi dobrý (použitý), Rok výroby: 1995, Tool Grinding Machine Michael Deckel S5 in Very Good Condition Technical Data: >> Year of manufacture: 03/1995 >> Maximum grinding wheel diameter: 100 mm >> Spindle speed: 5600 rpm >> Power consumption: 1.5 kW >> Weight: 450 kg Accessories: >> Swiveling dividing head SK40 >> Various SK40 holders Bsdpspr U Etsfx Afajdk About the machine: Offered here is a Michael Deckel S5 tool grinding machine. This machine is suitable for grinding high-precision parts. The Deckel S5 is in very good condition. Both mechanically and electrically inspected. Take advantage of the opportunity to inspect and test this machine under power at our premises.

Stav: veľmi dobrý (použitý), Rok výroby: 1992, Funkcionalita: plne funkčný, Universal tool grinding machine Michael Deckel S11 with accessories and tool cabinet in very good condition!! Technical data: >> Year of manufacture: 1992 >> Serial no.: 1673 Clamping range: >> Clamping surface of tool carriage: 500 x 180 mm >> Max. tool diameter between centers: 130 mm >> Max. tool diameter for cantilever clamping in the universal indexing head: 620 mm >> Max. tool length between centers: 270 mm >> T-slot (machine base): 12 mm >> T-slots (grinding head, tool carriage, and accessories): 8 mm Movement range: >> Traverse paths Grinding stroke: 190 mm Grinding stroke for helical grinding: 190 mm Cross adjustment tool carriage: 100 mm Bdjdexu E Nqopfx Afajk Vertical adjustment grinding head: 325 mm Longitudinal adjustment grinding spindle: 5 mm >> Coarse adjustment paths Tool holder: 220 mm Grinding head support: 800 mm Universal indexing head on tool carriage: 330 mm >> Swivel angles Grinding head support: 360 degrees Grinding head: 360 degrees Tool holder: 360 degrees Grinding spindle: Three-phase drive motor: 1.1 kW at 2800 rpm Spindle speeds, stepless: 2000 to 10000 rpm Max. grinding wheel diameter: 125 mm Max. cutting disc diameter: 200 mm Dimensions: Weight: 520 kg Size (D x W x H): 800 x 1100 x 1760 mm Space required (including operation): 2.5 x 2.3 m Accessories and equipment: 1 pc. tool cabinet with contents >> See pictures About the machine: For sale is a universal tool grinding machine Michael Deckel S11. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small series can be ground surprisingly quickly, economically, and flexibly, while offering the highest level of operating comfort. The Deckel S11 is in very good condition and comes with a wide range of accessories. Mechanically and electrically tested. Take the opportunity to visit and test this machine under power on site.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Univerzálna frézka Deckel FP3 s 3-osovým digitálnym odpočtom RSF Elektronik Z-530!! Technické údaje: >> Rok výroby cca 1975, výrobné číslo 0681 >> Otočno-sklopný stôl (nový, repasovaný) >> Otáčky: 40 – 2000 ot./min >> Pracovný posuv a rýchloposuv v 3 osiach >> Výkon pohonu: 3 kW >> Pohyb v osiach X/Y/Z: 500/300/400 mm >> Výbava: vertikálne a horizontálne vreteno >> Vertikálna pinola a horizontálna pinola výsuvná – SK-40 >> Uťahovací systém M16 >> Hmotnosť cca 1300 kg Príslušenstvo a vybavenie: >> 3-osový digitálny odpočet RSF Elektronik Z-530 >> Zariadenie na prívod chladiaceho média >> Centrálne mazanie O stroji: Ponúka sa univerzálna frézka Deckel FP3 vo veľmi dobrom stave. Všetky vretená sa pohybujú hladko. Teleskopické kryty sú takmer všetky nové. Otočno-sklopný stôl je takmer nový. Bol vykonaný výmenný olej. Stroj je mechanicky aj elektricky odskúšaný. Digitálny odpočet umožňuje jednoduchšiu a presnejšiu prácu. Využite možnosť obhliadky a vyskúšania stroja Deckel priamo u nás pod prúdom. Bjdpexu E I Hofx Afajdk Stroj je okamžite k dispozícii!!!

Stav: veľmi dobrý (použitý), Universal tool grinding machine Michael Deckel S11 with accessories and tool cabinet in very good condition!! Technical Data: >> Year of manufacture: 1986 >> Serial number: 759 Clamping Range: >> Clamping surface of tool carriage: 500 x 180 mm >> Max. tool diameter between centers: 130 mm >> Max. tool diameter for cantilever setup in the universal dividing head: 620 mm >> Max. tool length between centers: 270 mm >> T-slots machine base: 12 mm >> T-slots grinding head, tool carriage and accessories: 8 mm Travel Range: >> Working travels: Grinding stroke: 190 mm Grinding stroke during helical grinding: 190 mm Cross travel of tool carriage: 100 mm Vertical adjustment of grinding head: 325 mm Longitudinal adjustment of grinding spindle: 5 mm >> Coarse adjustment: Tool holder: 220 mm Grinding head support: 800 mm Universal dividing head on tool carriage: 330 mm >> Swivel angles: Grinding head support: 360 degrees Grinding head: 360 degrees Tool holder: 360 degrees Grinding Spindle: Three-phase drive motor: 1.1 kW at 2800 rpm Spindle speeds, stepless: 2000 to 12,000 rpm Max. grinding wheel diameter: 125 mm Max. cut-off wheel diameter: 200 mm Dimensions: Bdodpsqd N S Defx Afajk Weight: 520 kg Dimensions (D x W x H): 800 x 1100 x 1760 mm Required space (incl. operation): 2.5 x 2.3 m Accessories and Equipment: 1 pc tool cabinet including: >> Universal dividing head SK40 >> Helical and relief grinding attachment >> Radius grinding attachment SK40 >> Tailstock >> Swiveling support finger >> Machine vice >> SK40 tool holders >> Gauge holder >> Intermediate bearing >> Setting gauge >> Support finger for radius cutters >> Tooth supports >> Dividing head center >> Protective covers >> 1 set collets, as new, from 1 to 17.5 mm in 0.5 mm increments >> Grinding wheel arbors >> Various grinding wheels >> Index plates >> Extraction unit with vacuum cleaner >> Various holders and much more (see photos) About the machine: For sale is a universal tool grinding machine by Michael Deckel S11. The machine is suitable for grinding high-precision parts. With the S11, single parts and small batches can be ground surprisingly quickly, economically, and flexibly, all while maintaining maximum operator comfort. The Deckel S11 is in very good condition and comes with extensive accessories. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test this machine under power on site.