Weiler 160 Cnc kúpiť použité (197)

Stav: dobrý (použitý), Vodiaci a posuvový sústruh WEILER LZ330 z výučbového zariadenia - Priemer otáčania nad ložom: 330 mm - Priemer otáčania nad suportom: 165 mm - Dĺžka sústruženia: 800 mm - Priechod vretena: 36 mm - Rozsah otáčok: 25–2800 ot./min - Automatické pozdĺžne a čelné posuvy - Multifix nástrojový držiak s vložkami Hsdpswndcfofx Aguefn - Výkon pohonu: 3 kW - Upínacie klieštinové zariadenie + 20x klieštin - Trojčeľusťové skľučovadlo - Štvorčeľusťové skľučovadlo - Upínacia doska - Zadná stena proti trieskam - Rôzne príslušenstvo - Dokumentácia Rozmery: D x Š x V: 1,8 x 0,7 x 1,6 metra / Hmotnosť: 750 kg Zmena údajov a chýb vo vstupoch vyhradená

Stav: veľmi dobrý (použitý), Swing diameter over bed: 280 mm Swing diameter over cross slide: 160 mm Turning length: 500 mm Center height: 140 mm Distance between centers: 500 mm Spindle bore: 36 mm Spindle speeds: 15 - 3550 rpm Spindle nose: DIN 55022 size 5 Longitudinal feeds: 0.008 - 0.560 mm/rev Cross feeds: 0.004 - 0.280 mm/rev Thread cutting - metric pitch: 0.2 - 12 mm Lead screw diameter: 24 mm Lead screw pitch: 6 mm Tailstock quill taper: MT 3 Tailstock quill stroke: 90 mm Tailstock lateral offset from center position: 15 mm Total power requirement: 2.2 kW Hfjdpfewngkxsx Aguon Machine weight approx.: 0.6 t Machine dimensions (L x W x H): 1.40 x 0.70 x 1.20 m - Machine from training workshop - Accessories: 3-axis digital readout, 3-jaw chuck RÖHM 160 mmø, MULTIFIX tool post size A, live center Machine no. 4684

Stav: dobrý (použitý), Funkcionalita: plne funkčný, used L + Z lathe with 3-axis digital readout Manufacturer: WEILER Model: Condor 81 B Machine No.: 87596 Year of manufacture: approx. 1987 Centre distance: 750 mm Swing diameter over bed: Ø 330 mm Centre height over bed: 165 mm Swing diameter over cross slide: Ø 180 mm Centre height over cross slide: 90 mm Spindle bore: Ø 40 mm Tailstock taper: MT 3 Quill stroke: 110 mm Spindle speed: 45 - 2800 rpm (16 steps + 2 motor speeds) Feed range: 0.016 - 0.50 mm/rev Drive power: 1.6 + 3.2 kW (main motor, stages 1+2) Power supply: 400 Volt, 50 Hz Connected load: 32 kW Control voltage: 42 Volt Features & Accessories: - Heidenhain 3-axis digital readout, type VRZ 750 - Quick-change collet chuck and various collets + draw tube - 3-jaw power chuck Ø 160 mm Forkardt F160 - Multifix quick-change toolpost size B - LED work light Hfjdpfjvadqzsx Aguen - Bed stop - Automatic longitudinal and face feeds - Electromechanical spindle brake, selectable - 2x Emergency stop - Electric chuck key detection (via sleeve with pushbutton) - Coolant tank with pump in machine base - Foldable chuck guard - Splash guard - Wiring diagram - Adjustable machine feet Space required: 1850 x 950 x 1400 mm (L x W x H) Weight: approx. 1100 kg This newer generation of Weiler lathes is very operator-friendly and robust. Machine can be demonstrated under power on site. All information subject to change. Subject to prior sale.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, otvor vretena: 40 mm, výška stredu: 165 mm, šírka v strede: 750 mm, Dear Sir or Madam, Hfjdpew N Np Sjfx Agusn We are offering for sale a Weiler Condor B lathe. This model is particularly notable for its user-friendly operation and its excellent ratio of footprint to center height/center distance. The Condor B sits in terms of size between the Weiler Praktikant and Weiler Commodor, making it a true all-rounder for any workshop. The machine has been extensively partially overhauled in our workshop, ensuring it is in outstanding technical and visual condition. All guideways are in good order, the gearboxes run quietly, and the levers can be shifted smoothly. You are welcome to inspect the machine on site. Availability: On request Center height: 165mm Center distance: 750mm Spindle bore: Ø 40mm Tailstock taper: MK3 Chuck mount: Short taper DIN55027 size 5 with bayonet lock Quill travel: 85mm Speed range: 22–2800 rpm Thread types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.18–28mm Spindle brake: Switchable Voltage: 400V Dimensions: approx. 1.80x1.30x0.9m (LxHxW) Weight: approx. 1100kg Additional features and accessories: 3-axis digital readout K+C (NEW), chuck guard (NEW), coolant system, 2x emergency stop buttons, leadscrew and feed rod cover (optional), operating manual, and more upon request... Our Service Promise to You: - We are a certified master craftsman business in mechanical engineering - All machines are at least workshop-tested - All lubricants and any worn parts are replaced beforehand - Upon request, we can fully or partially overhaul your selected machine - Upon request, we can repaint your selected machine in your preferred color - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further accessories such as safety devices - We are happy to arrange shipping and/or installation for you

Stav: použitý, číslo stroja/vozidla: 1717, použitý hrotový a závitový sústruh WEILER PRAKTIKANT Výška hrotu: 140 mm Vzdialenosť hrotov: 500 mm Priemer vretena: 36 mm Hfsdpfx Asuqb Emjgujn Otáčky vretena: 42 - 2 000 ot./min S digitálnym odpočtom RSF pre 3 osi, 1 ks trojčeľusťové skľučovadlo Ø160 mm, Elektricky istený kryt skľučovadla, Multifix držiak nožov veľ. A s 3 vložkami, Pákové upínacie klieštinové zariadenie s 15 klieštinami. Stroj sa nachádza u nás na sklade v 71334 Waiblingen-Beinstein a je okamžite k dispozícii. Obhliadka stroja je možná po dohode.

Stav: použitý, Rok výroby: 1982, Obežný priemer nad lôžkom 297 mm Obežný priemer nad suportom 160 mm Dĺžka obrábania 500 mm Vzdialenosť medzi hrotmi 500 mm Otáčky 15 – 3550 ot./min Hjdpfevxwlpsx Aguofn Vretenová hlava veľ. 5 (DIN 55022) Vretenový otvor 36 mm Upnutie pinoly koníka MK 3 Zdvíh pinoly koníka 90 mm Posuv koníka 500 mm Otáčky motora 1440 / 2830 1/min Výkon motora 3 / 2,2 kW Hmotnosť 0,8 t Priestorové nároky cca 1,40 x 0,70 x 1,20 m Ochranné zariadenie skľučovadla s el. vypínačom Náradový kabinet s rôznym vybavením

Stav: dobrý (použitý), Hlavná a ťažná sústruh WEILER CONDOR z výučbovej inštitúcie - Originálny lak - Výška hrotu 165 mm - Priemer sústruženia nad lôžkom 330 mm - Priemer sústruženia nad suportom 170 mm - Dĺžka sústruženia 800 mm - Otáčky vretena 24-2800 ot./min - Automatické pozdĺžne a čelné posuvy - Priemer otvoru vretena 38 mm - Koník MK3 - Upínacie klieštinové zariadenie vrátane 17 ks klieštin - Trojčeľusťové skľučovadlo - Multifix s nadstavcami - Elektrická ochrana skľučovadla - Ochranná stena proti trieskam - Pracovné osvetlenie - Dokumentácia - Rôzne príslušenstvo Rozmery: Hfedowm I E Ispfx Aguen D x Š x V 1,9 x 0,9 x 1,6 m / Hmotnosť 800 kg Chyby a omyly vyhradené

Stav: veľmi dobrý (použitý), Swing over bed: 280 mm Swing over cross slide: 160 mm Turning length: 500 mm Centre height: 140 mm Distance between centres: 500 mm Spindle bore: 36 mm Spindle speeds: 15 - 3550 rpm Spindle nose: DIN 55022 size 5 Longitudinal feeds: 0.008 - 0.560 mm/rev Cross feeds: 0.004 - 0.280 mm/rev Hsdewm Rmuspfx Agusfn Metric threads (pitch): 0.2 - 12 mm Leadscrew diameter: 24 mm Leadscrew pitch: 6 mm Tailstock taper: MT 3 Tailstock quill stroke: 90 mm Tailstock lateral offset from centre: 15 mm Total power requirement: 2.2 kW Machine weight approx.: 0.6 t Machine dimensions (L x W x H): 1.40 x 0.70 x 1.20 m - Machine from training workshop - Accessories: 3-axis digital readout, RÖHM 4-jaw chuck 140 mm ø, MULTIFIX toolpost size A Machine number: 4743

Rok výroby: 1980, Stav: použitý, 2 lunety v balení Weiler W2 Priechod 280 mm Výška hrotu 440 mm Šírka lôžka 320 mm Hmotnosť stroja cca 200 kg . +++++ Upozorňujeme, že stroj je demontovaný a pripravený na nakládku. Z tohto dôvodu nie je možná predvádzacia prevádzka pod prúdom ani vyhotovenie videa. Okrem toho náš inzerát obsahuje najvýstižnejšie fotografie v čo najlepšej kvalite. Zaslanie ďalších obrázkov, žiaľ, nie je možné. Hedpefgv Dgofx Agujfn +++++

Stav: veľmi dobrý (použitý), Rok výroby: 1988, Funkcionalita: plne funkčný, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout Technical Data: >> Year of manufacture: 1988, Machine No. 88-955 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock MT 3 >> Feeds from 0.015 to 0.46 mm/rev >> Capable of metric, inch, module, and diametral-pitch threads >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg Hjdpfetlu Scjx Aguefn >> Spindle brake can be engaged >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Equipment: >> 3-axis Heidenhain digital readout >> 1 pc. new 3-jaw chuck with 2 sets of jaws >> Collet chuck system, collets from 3 to 30 mm, 40 pcs. collets, some duplicate sizes >> Multifix size B with 3 tool holders >> Bed stop >> Machine feet >> Drill chuck >> Live center Safety Features: >> Lead and feed screw guard >> 2 emergency stop buttons >> Spindle brake About the Machine: Offered is a used Weiler Condor 81 lathe from 1988 in very good condition. The machine is, of course, fully functional. The lead and feed screws are fitted with a guard for safety. This is a very robust and powerful machine. The Heidenhain 3-axis digital readout makes operation easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to inspect and test the machine under power at our site.

Stav: dobrý (použitý), WEILER Praktikant 800R / Engine Lathe with Lead and Feed Screw Hedpfx Agjwp S Aijusfn - Swing over bed: 300 mm - Swing over cross slide: 150 mm - Turning length: 800 mm - Spindle bore: 42 mm - Speed range: 40–2000 rpm - Automatic longitudinal and cross feeds - Thread cutting / Metric / Imperial - Tailstock Morse taper: MK3 - Three-jaw chuck - Multifix quick-change toolpost with inserts - Chuck guard - Chip guard with work light - Chip tray - Change gears - Tool cabinet - Documentation Dimensions: LxWxH: 1.8 x 0.8 x 1.6 meters / Weight: 750 kg Subject to errors and omissions

Stav: veľmi dobrý (použitý), Swing over bed: 280 mm Hfodpfowlvi Sjx Aguon Swing over cross slide: 160 mm Turning length: 500 mm Centre height: 140 mm Centre distance: 500 mm Spindle bore: 36 mm Spindle speeds: 42 - 2000 rpm Spindle nose: DIN 55022 Gr. 5 Feed range: 0.019 - 0.912 mm/rev Thread pitch - metric: 0.25 - 12 mm Tailstock quill travel: 90 mm Tailstock taper: MT 3 Leadscrew diameter: 24 mm Total power requirement: 3 kW Machine weight approx.: 0.7 t Machine dimensions (L x W x H): 1.48 x 0.69 x 1.46 m - Machine from training workshop - Accessories: 3-axis digital readout HEIDENHAIN, 3-jaw chuck RÖHM 160 mmø, MULTIFIX tool post size A M-No. 1749

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of Manufacture: approx. 1990, Machine No. 3150 >> Center Height: 120 mm >> Center Distance: 430 mm >> Spindle Speed: 60 - 3000 rpm, 18 geared steps >> Spindle Bore: 23 mm >> Short Taper Spindle Nose DIN 4 >> Tailstock: Morse Taper No. 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible Threads: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.25 to 2.5 mm >> Engagable Spindle Brake >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: >> 1 piece 3-jaw chuck NEW 125 mm, with 2 sets of jaws >> Multifix size A with 2 tool holders >> Brand new collet chuck system with collets from 3 to 26 mm in 1 mm increments About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and uniformly. The bed guides are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and can produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and see the condition for yourself. Hedjvivmyjpfx Agusfn

Stav: nový, Centre Lathe & Leadscrew Lathe WEILER COMMODOR 180 GSD - New machine / Demonstration machine / Unused Hjdpfxewucv Rs Aguefn - 3-axis digital readout - CE marking - Centre height: 180 mm - Distance between centers: 1000 mm - Spindle bore: 56 mm - Swing over bed: 380 mm - Swing over cross slide: 215 mm - Speed range: 25 - 2000 rpm - Automatic longitudinal / cross feeds - Thread cutting: Metric / Inch / Diametral - Tailstock quill taper: MT4 - Quill travel: 150 mm - Coolant system - Multifix tool post with insert - 3-jaw chuck 200 mm - Work lamp - Chip guard (rear panel) - Documentation Dimensions: LxWxH 2.4 x 1.4 x 1.7 meters / Weight 1700 kg Errors / input mistakes excepted.

Stav: veľmi dobrý (použitý), Swing diameter over bed: 280 mm Swing diameter over support: 160 mm Turning length: 500 mm Center height: 140 mm Distance between centers: 500 mm Spindle bore: 36 mm Spindle speeds: 42 - 2000 rpm Spindle nose: DIN 55022 size 5 Feed range: 0.019 - 0.912 mm/rev Thread cutting – metric pitch: 0.25 - 12 mm Tailstock quill stroke: 90 mm Tailstock taper: MT 3 Hsdpfewiilhjx Aguefn Leadscrew diameter: 24 mm Total power requirement: 3 kW Machine weight approx.: 0.7 t Machine dimensions (L x W x H): 1.48 x 0.69 x 1.46 m - Machine from training workshop - Accessories: 3-axis digital readout K+C ARBAH-L (=German manufacturer), 3-jaw chuck 160 mmø, MULTIFIX toolpost size A, collet chuck with various collets, steady rest Item no. 1277

Stav: veľmi dobrý (použitý), Rok výroby: 1983, Funkcionalita: plne funkčný, Weiler Centre Lathe Model Condor 81 - Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout from K&C Technical Data: >> Year of manufacture: 1983 Machine No. 83-067 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2,800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Spindle brake, switchable >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> NEW 3-axis digital readout from K&C, 12-month manufacturer warranty with instruction manual Functions: mm/inch switching, ABS/INC coordinate selection, value halving, reference point, 200-tool programming, taper calculation, radius/diameter display, quick zeroing, counting direction switching >> 1 piece new 160 mm 3-jaw chuck with 2 sets of jaws >> New collet chuck and new collets from 3 to 26 mm, increment 1 mm >> Multifix size B with 3 tool holders >> Electronic spindle protection Hedpfx Agjwb Supsuofn >> Rear splash guard >> Coolant system >> Machine feet About the Machine: Offered here is a used Weiler Condor 81 in very good condition. The machine is, of course, fully functional. It is a very robust and powerful lathe. The new 3-axis digital readout from K&C makes operation easier and more precise. The machine has been electrically and mechanically tested by us, and a complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test the machine under power on site.

Stav: dobrý (použitý), Lead and feed spindle lathe WEILER DA 260x1000 - Digital readout – three axes "NEW" - Centre height: 260 mm - Swing over bed: 535 mm - Swing over cross slide: 345 mm - Distance between centres: 1000 mm - Spindle bore: 71 mm - Speed range: 33 – 1500 rpm - 12 x spindle speeds via gearbox - Automatic longitudinal / cross feeds - Thread cutting / Metric / Inch / Diametral - Tailstock Morse Taper 4 - NEW THREE-AXIS DIGITAL READOUT - Drive power: 7.5 kW - Cross slide nut "NEW" - Multifix toolholder base with insert Hjdpfx Agowiztwjuefn - 3-jaw chuck 350 mm - 2 x emergency stop - Electric chuck guard "NEW" - Chip guard at rear - Coolant system - Drill chuck - Documentation Dimensions: LxWxH 2.7 x 1.5 x 1.7 meters / Weight: 1700 kg Errors / omissions excepted.

Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, Weiler Commodor Lead and Feed Shaft Lathe with 3-axis K&C Digital Readout, COMPLETELY OVERHAULED with Inspection Protocol according to New Machine Tolerances Technical Data: >> Machine No. 2020 >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Morse Taper 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Threads possible: Metric, Inch, Module, and Diametral Pitch >> Metric Pitch Range: 0.35 to 12 mm >> Weight approx. 1,500 kg >> Spindle Brake Switchable >> Drive Power: 2.0 / 4.0 kW >> Length 2.2 m, Height 1.5 m, Depth 1 m Hfsdpfx Agsvrckqsuen Accessories and Features: >> 3-axis K&C digital readout, new, 12 months manufacturer's warranty with user manual. Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, 200 tool memory, taper calculation, radius/diameter switching, quick zeroing, counting direction switching >> 3-jaw wedge bar chuck in almost new condition, 200 mm, 1 set of jaws >> Multifix size B with 2 tool holders NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle safety guard >> Spindle brake >> 2 emergency stops On request: Lead and feed shaft covers About the Machine: Offered is a Weiler Commodor lead and feed shaft lathe in geometrically overhauled condition. The guides have been reground or hand-scraped as new. Acceptance according to test protocol. Resprayed in 2K high-gloss white. Multifix toolpost and chuck are new. For safety: The machine features a brake motor, electronic spindle safety guard, and two emergency stops — an absolutely as-new condition lathe. Even at high spindle speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and surfaces with a ground finish can be produced. You are welcome to inspect the machine under power at our premises to verify its exceptional condition.

Stav: dobrý (použitý), WEILER Praktikant 800R Lead and Feed Screw Lathe - Swing over bed: 300 mm - Swing over cross slide: 150 mm - Turning length: 800 mm - Spindle bore: 42 mm - Speed range: 40 - 2000 rpm - Automatic longitudinal/cross feeds - Thread cutting / metric / imperial - Tailstock Morse taper 3 - Drive power: 3 kW - Multifix quick-change toolpost with tool holders - Collet quick-clamping system incl. collets - Chuck guard - Chip guard with work light - Emergency stop - Change gears Hodjwl Rlbjpfx Aguefn - Live centre - Drill chuck - Tool cabinet - Documentation Dimensions: LxWxH 1.8 x 0.8 x 1.6 m / Weight 750 kg Subject to errors and omissions

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus GS lead and feed screw lathe in very good original condition!!! Technical data: - Year of manufacture: approx. 1992, Machine No. 4549 - Centre height: 120 mm - Centre distance: 430 mm - Speed range: 60 - 3,000 rpm in 18 gearbox steps - Spindle bore: 23 mm - Short taper spindle nose DIN 4 - Tailstock: MT 2 - Feed range: 0.03 to 0.15 mm/rev Hsdpjwkh Abjfx Agujfn - Thread types: Metric, Whitworth, Module, and Diametral Pitch - Metric thread pitches: 0.25 to 2.5 mm - Switchable spindle brake - Weight: approx. 360 kg - Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and equipment: - Brand new collet chuck set, new collets from 3 to 25 mm - 1 three-jaw chuck with 2 sets of jaws - Multifix size A toolpost with 2 toolholders About the machine: For sale is a Weiler Primus GS lead and feed screw lathe in very good original condition. The machine is, of course, fully functional. All slides operate very smoothly and evenly. The bedways are in very good condition. Even at high speeds, the Weiler runs very quietly. The Primus was used in a training facility. This newer generation of Weiler lathes is extremely user-friendly and allows the production of ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and see its condition for yourself.

Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C NEWLY Refurbished with Inspection Protocol for New Machine Tolerances Technical Data: >> Machine No. 1824 >> Centre height: 180 mm >> Centre distance: 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55029 size 5 >> Tailstock Morse taper 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Supported thread types: metric, inch, module and diametral pitch threads >> Metric thread pitches: from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake, switchable >> Motor power: 2.0/4.0 kW Hfjdpevrcqdefx Agusn >> Dimensions (LxHxW): 2.2 m x 1.5 m x 1 m Accessories and Equipment: >> 3-axis K&C digital readout, new, 12 months manufacturer warranty with operating manual Functions: mm/inch switching, ABS/INC coordinate selection, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, fast zeroing, counting direction switching >> 200 mm three-jaw wedge bar chuck, as new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops Optional: Covers for lead and feed screw About the Machine: Offered here is a Weiler Commodor lead and feed screw lathe in a geometrically overhauled condition. The guides are newly ground or scraped. Acceptance according to test protocol. 2K white gloss paintwork. The Multifix tool post and chuck are new. Safety: The lathe features a brake motor, electronic spindle protection, and two emergency stops—an absolutely as-new lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and surface finishes comparable to grinding can be achieved. Take the opportunity to inspect this machine under power on-site and see the condition for yourself.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus GS lead and feed screw lathe with 3-axis digital readout Easson ES8 from a training workshop, excellent condition! Technical data: - Year of manufacture: approx. 1990, machine no. 3768 - Centre height: 120 mm - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm in 18 geared steps - Spindle bore: 23 mm - Short taper spindle nose DIN 4 - Tailstock: Morse taper 2 (MT2) - Feeds: from 0.03 to 0.15 mm/rev - Thread cutting: Metric, inch, module, and diametral pitch threads possible - Metric thread pitches: 0.25 to 2.5 mm - Weight: approx. 360 kg - Dimensions: 1.2 m (L) x 1.3 m (H) x 0.65 m (D) Hfsdpfxevkfhpj Aguon Equipment and accessories: - 3-axis digital readout by Easson ES8 - Collet clamping system from 1 to 20 mm, collets in 1 mm increments with mounting and drawtube - 1 three-jaw chuck with two sets of jaws - 1 four-jaw chuck with two sets of jaws - Multifix quick-change toolpost size A with 3 tool holders - Bed stop - Taper turning attachment About the machine: For sale is a Weiler Primus lead and feed screw lathe, year of manufacture approx. 1990, in outstanding condition. Naturally, the machine is fully functional. All slides move very smoothly and evenly. The bed guides are in very good condition. The Weiler runs quietly even at high speeds. The lathe comes from the training workshop of a large company. This newer generation of Weiler lathes is very user-friendly and capable of producing ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stav: veľmi dobrý (použitý), Rok výroby: 1987, Funkcionalita: plne funkčný, Weiler Precision Lathe Model Condor 81, Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout by K&C Technical Data: >> Year of manufacture: 1987 Machine no. 87 835 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Threads possible: Metric, Inch, Module and Diametral Pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Switchable spindle brake >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: Hfjdpfxowrmuxs Aguon >> NEW K&C 3-Axis Digital Readout, 12-month manufacturer's warranty with operating manual Functions: mm/inch display switch, coordinate selection ABS/INC, value halving, reference point, tool programming for up to 200 tools, taper calculation, radius/diameter mode, quick zero setting, direction of counting switch, etc. >> 1 piece 160 mm 3-jaw chuck, NEW, with 2 sets of jaws >> 1 piece 160 mm 4-jaw chuck, with 1 set of jaws >> Collet chuck and NEW collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 2 toolholders >> Bed stop >> Electronic spindle safety guard >> Rear panel >> Coolant system >> Machine feet About the Machine: Offered is a used Weiler Condor 81 in very good condition. The machine is, of course, fully functional, has been completely dismantled, and repainted. A very robust and high-performance machine. The new K&C 3-axis digital readout makes work even easier and more precise. The machine has been electrically and mechanically tested in our workshop. A complete oil change has also been performed. This newer generation of Weiler lathes is extremely user-friendly. Take the opportunity to inspect and test the machine under power at our facility.

Stav: veľmi dobrý (použitý), Rok výroby: 1991, Funkcionalita: plne funkčný, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-axis Digital Readout K&C NEW Excellent Condition!! Technical Data: >> Year of manufacture: 1991 Machine No. 91-160-2804 >> Centre height: 160 mm >> Centre distance: 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore: 40 mm >> Short-taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock Morse taper 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread cutting: Metric, Imperial, Module and Diametral Pitch possible >> Metric thread pitches: 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake switchable >> Length 1.6 m, Height 1.25 m, Depth 0.7 m Accessories and Equipment: >> NEW K&C 3-axis digital readout, 12 months manufacturer's warranty, with operating manual Functions: Switchable mm/inch, coordinate selection ABS/INC, halving of displayed value, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zero setting, count direction switching >> Quick-clamping device, collets from 1 to 29 mm in 1 mm increments >> NEW 160 mm three-jaw chuck with jaws >> Multifix size A with 2 tool holders >> Electrical chuck guard Hsdewv S Ufopfx Aguefn >> Bed stop >> Rear panel >> Machine feet >> Coolant unit About the Machine: Offered here is a Weiler Praktikant 160 B lead and feed screw lathe, built to toolmaker precision and in very good condition. The machine is, of course, fully functional. The Weiler was completely disassembled and repainted in light grey. All carriage movements are smooth and even. The Weiler also runs smoothly at high speeds. This newer generation of Weiler lathes is very user-friendly and capable of producing ground-like surface finishes. Take the opportunity to view and test the machine under power onsite and see the condition for yourself.

Stav: použitý, Funkcionalita: plne funkčný, Weiler Matador VS-2 Lead and Feed Screw Lathe Technical Specifications: >> Year of manufacture: approx. 1970 Machine No. M1012 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 30 – 3,550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet locking >> Tailstock Morse taper 3 >> Feeds from 0.010 to 1.184 mm/rev >> Threads: metric, imperial, module and diametral pitch possible >> Metric thread pitches from 0.25 to 15 mm >> Weight: approx. 700 kg >> Dimensions: length 1.4 m, height 1.2 m, depth 0.55 m Accessories and Equipment: >> Collet chuck system with 32 collets (set incomplete) and matching receiver >> 1 three-jaw chuck incl. set of jaws >> 1 four-jaw chuck incl. set of jaws >> Multifix quick-change toolpost, size A, with 2 tool holders >> Change gears >> Bed stop About the machine: Hsdjvv Etvopfx Agusfn For sale is a used Weiler Matador VS-2 in fully functional condition. You are welcome to inspect the machine under power at our site and convince yourself of its condition.