Weiler E 80 kúpiť použité (191)

Stav: použitý, Funkcionalita: plne funkčný, Weiler Matador VS-2 Lead and Feed Screw Lathe Technical Specifications: >> Year of manufacture: approx. 1970 Machine No. M1012 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 30 – 3,550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet locking >> Tailstock Morse taper 3 Duodovv Etvepfx Abxew >> Feeds from 0.010 to 1.184 mm/rev >> Threads: metric, imperial, module and diametral pitch possible >> Metric thread pitches from 0.25 to 15 mm >> Weight: approx. 700 kg >> Dimensions: length 1.4 m, height 1.2 m, depth 0.55 m Accessories and Equipment: >> Collet chuck system with 32 collets (set incomplete) and matching receiver >> 1 three-jaw chuck incl. set of jaws >> 1 four-jaw chuck incl. set of jaws >> Multifix quick-change toolpost, size A, with 2 tool holders >> Change gears >> Bed stop About the machine: For sale is a used Weiler Matador VS-2 in fully functional condition. You are welcome to inspect the machine under power at our site and convince yourself of its condition.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of Manufacture: approx. 1990, Machine No. 3150 >> Center Height: 120 mm >> Center Distance: 430 mm >> Spindle Speed: 60 - 3000 rpm, 18 geared steps >> Spindle Bore: 23 mm >> Short Taper Spindle Nose DIN 4 >> Tailstock: Morse Taper No. 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible Threads: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.25 to 2.5 mm >> Engagable Spindle Brake >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: Djdevivmyopfx Abxjuw >> 1 piece 3-jaw chuck NEW 125 mm, with 2 sets of jaws >> Multifix size A with 2 tool holders >> Brand new collet chuck system with collets from 3 to 26 mm in 1 mm increments About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and uniformly. The bed guides are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and can produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Stav: veľmi dobrý (použitý), Rok výroby: 1991, Funkcionalita: plne funkčný, Weiler Centre Lathe Model Condor B Lead and Feed Screw Lathe with NEW 3-axis Digital Readout by K&C from Training Workshop!! Technical data: >> Machine-No. 91-1814, Year of manufacture: 1991 Dusdpsw Nw Dqofx Abxow >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock taper: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and equipment: >> 3-axis digital readout by K&C, new, 12 months manufacturer's warranty, with operating manual Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference mark, tool data for up to 200 tools, taper calculation, radius/diameter display, fast zeroing, counting direction reversal >> 1 piece new 160 mm 3-jaw chuck with 2 sets of jaws >> 1 piece 160 mm 4-jaw chuck with 1 set of jaws >> New collet chuck and new collets from 2 to 24 mm, incremented by 1 mm >> Multifix size B with 2 holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Fixed steady >> Machine feet For safety: electronic spindle guard, 2 emergency stop buttons, change gear case with limit switch, spindle brake About the machine: Offered is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and high-performance machine. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been done. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our site.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler engine lathe model Condor 81, leadscrew and feed shaft lathe with 3-axis Heidenhain digital readout Technical data: >> Year of manufacture: 1988, Machine No. 88-955 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock taper: MK 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types possible: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight approx. 1,100 kg >> Spindle brake selectable >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and features: >> 3-Axis Heidenhain digital readout >> 1 pc. three-jaw chuck (new) with 2 sets of jaws >> Collet chuck, collets from 3 to 30 mm (40 pcs, some duplicates) >> Multifixed size B with 3 tool holders >> Bed stop >> Machine feet Dodpfjxu Hlaex Abxsuw >> Drill chuck >> Live center Safety features: >> Leadscrew and feed shaft cover >> 2 emergency stop buttons >> Spindle brake About the machine: A used Weiler Condor 81 lathe, year of construction 1988, in very good condition is being offered. The machine is, of course, fully functional. For safety, the leadscrew and feed shaft are equipped with a protective cover. This is a very robust and high-performance machine. The 3-axis Heidenhain digital readout makes operation easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was carried out. This newer generation of Weiler lathes is extremely user-friendly. Take the opportunity to inspect and test this machine under power at our location.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 >> Center height: 120 mm >> Center distance: 430 mm >> Spindle speeds: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Camlock spindle nose KK4 DIN 55027 >> Tailstock quill: MT2 >> Feed rates from 0.03 to 0.15 mm/rev >> Threading capability: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Equipment and Accessories: >> 1 pc. 160 mm 3-jaw chuck with 1 set of jaws >> 1 pc. New 125 mm 3-jaw chuck with 2 sets of jaws >> Collet chuck system with collets from 1 mm to 20 mm, in 1 mm increments >> Multifix size A toolpost with 3 tool holders >> Stop Dujdou Aftgepfx Abxow >> Change gears About the Machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully operational. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was previously located in a training workshop. This newer generation of Weiler lathes is very user-friendly and can produce surfaces comparable to grinding. Take the opportunity to inspect this machine under power on site and see for yourself its condition.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: Dujdpsvtp Edefx Abxow >> Year of manufacture: approx. 1985 Machine No. 1191 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock Morse taper 2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Equipment and Accessories: >> 1 x 125 mm three-jaw chuck with 2 sets of jaws >> Collet chuck system with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electrical spindle guard About the machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is of course fully functional. The slides all operate very smoothly and evenly. The Weiler also runs quietly at high spindle speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and is capable of producing ground-like surface finishes. Take the opportunity to inspect this machine under power on site and verify its condition for yourself.

Stav: dobrý (použitý), WEILER COMMODOR L&Z sústruh z nemeckej armády - Dobrý prevádzkyschopný stav - Sústružnícky priemer 180 mm - Dĺžka sústruženia 1000 mm - Priechod vretenom 56 mm - Rozsah otáčok 25 - 2000 ot./min - Závity / metrické / palcové atď. - Automatické pozdĺžne a priečne posuvy - Koník MK 4 - Trojčeľusťové skľučovadlo 250 mm - Elektrická ochrana skľučovadla - Multifix základný držiak a vložky - Chladiace zariadenie - Ochranná zadná stena proti trieskam Dsdpfxsykknfs Abxeuw - Dokumentácia stroja Rozmery: D x Š x V 2,5 x 1,3 x 1,7 m / Hmotnosť: 1500 kg Možnosť omylov a chýb vyhradená

Stav: dobrý (použitý), Hrotový sústruh WEILER COMMODOR B zo vzdelávacieho zariadenia -GS - identifikácia -3-osý digitálny odpočet "NOVÝ" -Výška hrotu 180 mm -Vzdialenosť medzi hrotmi 1000 mm -Prechod vretena 56 mm -Otáčky vretena 15 - 2000 ot./min -Automatické pozdĺžne a čelné posuvy -Rezanie závitov / metrický / palcový / modul / diametrálny -Elektrická ochrana skľučovadla -2x núdzové vypnutie -Multifix s vložkou Dedpjyf U E Dofx Abxjuw -Štvorčeľusťové skľučovadlo - Röhm -Zadná stena na triesky -Chladiace zariadenie -Veľmi udržiavaný pôvodný stav -Dokumentácia Rozmery: DxŠxV 2,3 x 1,2 x 1,7 metra / Hmotnosť 1600 kg Vyhradzujeme si právo na chyby a omyly pri zadávaní.

Stav: takmer ako nový (použitý), Weiler Primus Dedpoyy Ngtefx Abxjuw Špičkový stav! S príslušenstvom

Stav: veľmi dobrý (použitý), Rok výroby: 1992, Weiler Condor 81 Lathe with Heidenhain Digital Readout, Year 1992, in excellent original condition The machine originates from the training workshop of a renowned German mechanical engineering company. Technical Data: Year of manufacture: 2003 Engine and toolroom lathe WEILER Type Condor 81 Centre distance: 750 mm Swing over bed: 330 mm Centre height over bed: 165 mm Dujdpfx Abew T U Sgoxow Swing over cross slide: 180 mm Centre height over cross slide: 90 mm Spindle bore: 40 mm Chuck fitting: Short taper DIN 55027, size 5 Tailstock quill taper: MT 3 Quill stroke: 110 mm Spindle speed: 45 – 2800 rpm, 16 steps Drive power: 3 kW Power supply: 400 V, 50 Hz Spindle speed via 16-step gearbox Dimensions (L x W x H): 1850 x 950 x 1400 mm Weight: 1100 kg Accessories and Equipment: Röhm 3-jaw chuck Multifix quick-change toolpost Coolant system Heidenhain digital readout About the machine: We are offering a Weiler Condor 81 lathe with Heidenhain digital readout, year of manufacture 1992, in excellent condition. Of course, the machine is fully operational. All slides run very smoothly and evenly. Even at high speeds, the Weiler operates very quietly. This newer generation of lathes is extremely user-friendly and allows for the production of ground-like surface finishes. Take the opportunity to inspect this machine under power at our premises and see its condition for yourself. Further lathes from renowned manufacturers can be found on our website.

Stav: použitý, Dĺžka sústruženia 500 mm Priemer sústruženia nad lôžkom 297 mm Priemer sústruženia nad suportom 160 mm Dujdpfxoxaccxs Abxsw Vrtanie vretena 36,0 mm Upínanie podľa DIN 55022, veľkosť 5 Vreteník: kužeľ 3 MK Posuv pinoly 90,0 mm Rozsah otáčok 30 – 3550 ot./min Otáčky motora: 1410 / 2830 ot./min Celkový výkon 3,3 kW Napätie 380 V Hmotnosť približne 620 kg. Rozmery D-Š-V 1420 x 700 x 1200 mm Pôvod zo strednej odbornej školy - veľmi dobrý stav (!!) Pravidelne servisovaný spoločnosťou WEILER Obzvlášť vhodný na stredne veľké presné sústružené dielce Vybavenie: - robustný sústruh s vodiacim a ťažným vretenom - KLOPFER štvorčeľusťové skľučovadlo Ø 140 mm - Držiak upínacích klieštín s množstvom klieštin - Kľúč na skľučovadlo - MULTIFIX držiak nožov typu A s 3 novými vložkami - Posuvný koník - Nastaviteľný doraz lôžka - Ovládací panel vpredu vľavo - Automatické posuvy pre priečny a horný suport - Motor s prepínateľným počtom pólov - Stojan stroja so skrinkovými dvierkami (úložný priestor) - Zadná ochranná stena proti trieskam

Stav: použitý, Dreh length: 500 mm Swing diameter over bed: 297 mm Swing diameter over cross slide: 160 mm Spindle bore: 36.0 mm Mounting: DIN 55022 size 5 Quill taper: 3 MT Quill travel: 90.0 mm Spindle speeds: 30 - 3550 rpm Motor speeds: 1410 / 2830 rpm Total power requirement: 3.3 kW Voltage: 380 V Machine weight approx.: 620 kg Dimensions (LxWxH): 1420 x 700 x 1200 mm Dsdpfxsxacirs Abxeuw From a vocational school – very good condition (!!) Regularly serviced by WEILER factory service Especially suitable for medium-sized precision turned parts Equipment: - Robust leadscrew/feed shaft lathe - KLOPFER 4-jaw chuck Ø 140 mm - KLOPFER 3-jaw chuck Ø 140 mm - Collet chuck with extensive set of collets - Hinged chuck guard - Chuck key - MULTIFIX toolpost A, with 3x new tool holders - Adjustable tailstock - Adjustable bed stop - Control panel, front left - Automatic feeds for facing and cross slide - Pole-changing drive motor - Machine base with cabinet door (storage compartment) - Chip splash guard (rear) - Emergency stop button, lower right - Machine leveling feet - Original operating manual

Stav: vyžaduje opravu (použité), Dĺžka sústruženia 1000 mm Priemer sústruženia nad lôžkom 380 mm Priemer sústruženia nad suportom 190 mm Otáčky vretena 25 - 2000 ot/min Počet rýchlostí 18 Priemer vretenového otvoru 56,0 mm Upnutie pinoly koníka MK DIN 228 / MK 4 Výsun pinoly 150 mm Šírka lôžka 310 mm Príruba vretena DIN 55027 / 6 Pozdĺžne posuvy 0,022 - 0,8 mm/ot Priečne posuvy 0,011 - 0,4 mm/ot Závity metrické 0,3 - 10,0 mm Prevádzkové napätie 380 V Celkový príkon 7,5 kW Hmotnosť stroja cca 1600 kg Základné funkcie sú prítomné Stroj má viacero netesností Predaj v aktuálnom stave za špeciálnu cenu! Sústruh s presne brúseným a indukčne kaleným lôžkom. Veľmi vhodný napr. na použitie v dielňach a školiacich strediskách. - Video stroja - ?v=zCGu4i6V5dM Duodsw U U Uqjpfx Abxjw Vybavenie: - robustný sústruh s vodiacou a ťažnou skrutkou - FORKARDT 3-čeľusťové skľučovadlo Ø 200 mm, s kľúčom - MULTIFIX držiak nožov - veľkosť B - s 3x vložkami - posuvný koník vrátane rýchloupínacieho skľučovadla - ochrana proti trieskam, zadná stena - núdzové vypínač vpredu - nastaviteľný doraz lôžka - chladiace zariadenie vrátane zbernej nádoby - návod na obsluhu (PDF)

Stav: použitý, Priemer sústruženia nad lôžkom: 370 mm Priemer sústruženia nad suportom: 200 mm Dĺžka sústruženia: 1000 mm Výška hrotov: 185 mm Priechod vretena: 56 mm Upnutie pinoly koníka: MK 4 Otáčky: 50 - 2000 ot/min Príkon pohonu: 4,0 kW Hmotnosť stroja: cca 1,4 t Priestorové nároky: cca 2,3 x 1,1 x 1,3 m Sústruh s vodicou a ťahovou skrutkou Trojčeľusťové skľučovadlo 200 mm Držiak nožov Multifix veľ. B Dodsxfwckopfx Abxjuw 3 ks Multifix kazety Zariadenie núdzového zastavenia

Stav: pripravené na použitie (použité), Funkcionalita: plne funkčný, Weiler Commodor v dobrom pracovnom stave. Duodpjx Ngpdefx Abxsw Špecifikácia: Priemer sústruženia nad lôžkom: 380 mm Priemer sústruženia nad priečnym suportom: 190 mm Vzdialenosť medzi hrotmi: 1000 mm Priemer priechodu hlavného vretena: 56 mm Otáčky: 25-2000 ot./min. Výkon motora: 4 kW Stroj je vybavený: 3-osým digitálnym odmeriavaním 3-čeľusťovým skľučovadlom s viacerými čeľusťami Chladiacim zariadením Držiakom nožov Multifix so 4 držiakmi Upínacím zariadením s upínacími puzdrami Doraz na lôžku

Stav: pripravené na použitie (použité), Rok výroby: 2004, Funkcionalita: plne funkčný, sústružnícky priemer nad priečnym suportom: 160 mm, otvor vretena: 43 mm, dĺžka sústruženia: 750 mm, sústružnícky priemer: 330 mm, maximálna rýchlosť vretena: 4 500 ot./min, TECHNICKÉ PODROBNOSTI Dĺžka sústruženia: 750 mm Priemer sústruženia: 330 mm Priemer nad saním: 160 mm Vretenový otvor: 43 mm Maximálne otáčky vretena: 4 500 ot/min DETAILY STROJA Riadenie: Siemens VYBAVENIE Upínače (pružné klieštiny) Dusdpfjxf Hiaex Abxjw Čeľuste Držiak nástrojov