Weiler Md 260 kúpiť použité (174)

Stav: veľmi dobrý (použitý), Rok výroby: 2020, Pevná luneta pre sústruh WEILER E 50 vo veľmi dobrom stave. Rozsah upínania: 10 - 150 mm. Kledpfxjtx Avke Ab Sjl

Rok výroby: 1986, Stav: použitý, Weiler Primus sústruh, rok výroby cca 1986, trojčeľusťové skľučovadlo, revolverové rýchloupínacie zariadenie Multifix. Stroj je v dobrom stave, po dohode je možné predviesť v chode pod napätím. Klodpfxsn Ard Dj Ab Sol

Stav: veľmi dobrý (použitý), Weiler Ergodor Lathe Max. turning diameter over bed: approx. 320 mm Max. turning diameter over cross slide: approx. 160 mm Max. turning length: approx. 470 mm Bar capacity: approx. 36 mm Spindle: Speed range: approx. 30 - 3550 rpm Spindle nose: A2-5 Ksdpfx Absq Ixxyj Ssll Drive power: approx. 3.0 kW Automatic longitudinal & facing feeds: Feed range: approx. 0.020 - 2.0 mm/rev Thread cutting capability: - Metric: 0.20 - 12 mm - Inch: 80 - 2 TPI - Diametral pitch: 160 - 5.5 DP - Module: 0.1 - 4

Stav: dobrý (použitý), Rok výroby: 1988, Weiler lathe Kodjvgmbvspfx Ab Sell Model Condor B 2-axis digital readout Center height: 165 mm Center distance: 750 mm Swing over bed: 330 mm Swing over cross slide: 185 mm Spindle bore: 40 mm Connected load: 3 kW Speed range: 22–2,800 rpm Tailstock taper: MT 3 Coolant pump (not connected) Work lamp Automatic longitudinal and face feed Spindle brake - Hinged chuck guard - Splash guard Weight: approx. 1,040 kg 3-jaw chuck Multifix B quick-change toolpost Live center

Stav: použitý, celková dĺžka: 1 500 mm, celková šírka: 750 mm, celková výška: 1 350 mm, Hmotnosť bez nákladu: 700 kg - Dostupná dokumentácia: Áno - CE certifikát k dispozícii: Nie - Ovládanie: Konvenčné - Výška hrotu [mm]: 150 - Priemer sústruženia nad lôžkom [mm]: 300 - Priemer sústruženia nad suportom [mm]: 160 - Vzdialenosť medzi hrotmi [mm]: 500 - Šírka lôžka [mm]: 210 - Priechod vretena [mm]: 36 - Min. otáčky vretena [rpm]: 15 - Max. otáčky vretena [rpm]: 3550 - Rozmery na prepravu: 1500mm x 750mm x 1350mm (d x š x v) - Prepravná hmotnosť [kg]: 700kg - Počet prepravných balíkov [ks]: 1 Finančné informácie DPH: Uvedená cena je bez DPH Kljdpjx D Tlrjfx Ab Sjl Možnosť odpočtu DPH: DPH odpočítateľná pre podnikateľov Doručenie a spätný odkup možný kedykoľvek pre všetko z priemyselného sektora Lukas van Rossum

Stav: dobrý (použitý), Vzdialenosť medzi hrotmi: 450 mm Výška hrotu: 120 mm Priemer vŕtania vretena: 23 mm Otáčky: 40 – 3000 ot/min Plynule nastaviteľný pohon s 3-stupňovou prevodovkou a digitálnym ukazovateľom otáčok Kedpfx Abjw I A Uxe Soll Koník: MK 2 Výkon pohonu: 1,5 kW Hmotnosť: 350 kg Rozmery: 1200 x 650 x 1330 mm Lakovanie: Resedová zelená RAL 6011. Digitálny displej: Na požiadanie za príplatok Príslušenstvo: Ďalšie príslušenstvo na vyžiadanie

Stav: pripravené na použitie (použité), Rok výroby: 2004, otvor vretena: 41 mm, sústružnícky priemer: 330 mm, šírka v strede: 750 mm, otáčky (max.): 4 500 ot./min, riadenie Siemens kapacita 750x330 mm priemer vretenového otvoru 41 mm maximálne otáčky vretena 4000 ot./min turelový držiak typu multifix Kledpfxjxu Igxe Ab Ssl sada multifix upínacích čeľustí a klieští

Stav: takmer ako nový (použitý), Rok výroby: 1992, Sústruh WEILER Presný hrotový sústruh s ergonomickým dizajnom Weiler Ergodor je prvý nemecký ergonomicky navrhnutý sústruh. Poskytuje pracovné prostredie šetrnejšie k človeku a pomáha predchádzať zdravotným problémom. Hlavnou črtou je možnosť obsluhy v stoji aj v sede. Technické údaje: Vzdialenosť medzi hrotmi: 470 mm Obrábacia dĺžka: 430 mm Výška hrotu: 145 mm Maximálny priemer sústruženia nad saním: 160 mm Maximálny priemer otáčania nad lôžkom: 300 mm Vretenová hlava: kužeľový prírubový uzáver Bajonetové uchytenie DIN 55022 veľ. 5 alebo Camlock upínanie D 1-ASA-4 Priechod vretena: 36 mm Vnútorný kužeľ vretena podľa DIN 55022 veľ. 5 Otáčky vretena: Otáčky 30 – 3550 ot./min. S Otáčky 15 – 3550 ot./min. Brzdový motor 3 kW Brzdový motor 1,5/3 kW Pozdĺžny posuv saní: 150 mm Posuv horného sania: 100 mm Posuvy a závity: prepínateľné stupne na prevodovej skrini, 30 sekcií 2 1,5/3 kW 38 Prevod vo vretenníku: 3 20 Pozdĺžne posuvy: 150 mm cez prevodové kolesá, 100 mm cez ozubený remeň Priečne posuvy = 1/2 hodnoty pozdĺžnych posuvov Metrický závit: 0,2 – 12 mm Modulový závit: 0,1 – 4 mm Rozmery: 1450 x 640 x 1500 mm Čistá hmotnosť: 1000 kg Presnosť podľa normy DIN 8605 pre nástrojové stroje Ksdpfovgqu Hex Ab Sjll Vyrobené podľa pravidiel bezpečnosti práce, oficiálne skúšobné číslo A. EM 11 1545/80. Obrysové rozmery: 1450 x 640 x 1500 mm

Stav: dobrý (použitý), Vedený a vretenový sústruh WEILER PRAKTIKANT 800 R - Priemer sústruženia nad lôžkom: 300 mm Kjdpjx A Uktefx Ab Sell - Priemer sústruženia nad suportom: 150 mm - Dĺžka sústruženia: 800 mm - Priechod vretien: 42 mm - Rozsah otáčok vretena: 40 – 2000 ot./min - Automatické pozdĺžne / priečne posuvy - Rezanie závitov: metrický / palcový atď. - Koník: MK 3 - Trojčeľustové skľučovadlo - Ochranná stena proti trieskam + pracovné osvetlenie - Vanička na triesky - Výmenné ozubené kolesá - Skrinka na náradie - Dokumentácia Rozmery: DxŠxV: 1,8 × 0,8 × 1,6 m / Hmotnosť: 750 kg Možnosť chýb alebo preklepov vyhradená.

Stav: dobrý (použitý), Rok výroby: 1991, Type of machine: Cycle-controlled lathe Manufacturer: WEILER Model: E30 Year of manufacture: 1991 Control: Weiler Country of origin: Germany Additional information: Cycle-controlled lathe WEILER - E30 Technical details Turning diameter: max. 330 mm Turning length: 750 mm Control: Weiler Centre height: 165 mm Swing diameter over bed: 330 mm Max. swing diameter over cross slide: 160 mm Cross slide travel: 180 mm Bed saddle longitudinal travel: 395 mm Main spindle: Speed range – main spindle: 1 – 4,500 rpm Main spindle drive power: 9 / 11 kW Max. torque: 165 Nm Spindle nose: DIN 55027 / 5 Spindle diameter at front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: ( - ) mm Tool holder: Type: MultiFix Cutting tool shank section: 20 x 20 mm Tailstock: Quill stroke: 110 mm Quill diameter: 50 mm Tailstock taper: MK 3 Feeds: Rapid traverse: max. 10 m/min Feed force: 6 / 3 kN Feed range: 0 – 20 mm/min Thread cutting: Metric: 0.1 – 400 mm Inch: 1/4 – 56 TPI Module: 0.125 – 28 mm.II DP: 1 – 224 TPI.II Number of threads: max. 50 Kjdpfxjr Dvqzs Ab Sjll Total power requirement: 10 kVA Machine weight approx.: 1.5 t Space requirement approx.: 2.8 x 2.0 x 2.0 m

Stav: dobrý (použitý), Leit & Zugspindel sústruh WEILER CONDOR - Originálny lak - Výška hrotu 165 mm - Priemer sústruženia nad lôžkom 330 mm - Priemer sústruženia nad suportom 170 mm - Vzdialenosť medzi hrotmi 800 mm - Otáčky vretena 24 - 2800 ot./min Kjdpfx Aex A D Ubeb Soll - Automatické pozdĺžne / priečne posuvy - Priechodnosť vretena 38 mm - Koník MK 3 - Príslušenstvo na upínacie púzdra + 17x upínacích púzdier - Trojčeľusťové skľučovadlo - Multifix s vložkami - Elektrická ochrana skľučovadla - Zadná ochrana proti trieskam - Pracovné osvetlenie - Rôzne príslušenstvo - Dokumentácia Rozmery: DxŠxV 1,8x0,9x1,6 metra / Hmotnosť 800 kg Vyhradzujeme si právo na chyby a preklepy

Stav: pripravené na použitie (použité), Funkcionalita: plne funkčný, Weiler Commodor v dobrom pracovnom stave. Špecifikácia: Priemer sústruženia nad lôžkom: 380 mm Priemer sústruženia nad priečnym suportom: 190 mm Vzdialenosť medzi hrotmi: 1000 mm Priemer priechodu hlavného vretena: 56 mm Ksdpfx Abex Ngpdo Sell Otáčky: 25-2000 ot./min. Výkon motora: 4 kW Stroj je vybavený: 3-osým digitálnym odmeriavaním 3-čeľusťovým skľučovadlom s viacerými čeľusťami Chladiacim zariadením Držiakom nožov Multifix so 4 držiakmi Upínacím zariadením s upínacími puzdrami Doraz na lôžku

Stav: veľmi dobrý (použitý), Rok výroby: 2011, Weiler Primus VC presný sústruh Rok výroby: 2011 Technické údaje Maximálny priemer sústruženia: 250 mm Maximálna dĺžka sústruženia: 500 mm Výška hrotu: 140 mm Priemer obrobku nad ložom: 280 mm Max. priemer prekyvu nad suportom: 150 mm Hlavné vreteno: Rozsah otáčok hlavného vretena: 30 – 4 000 ot./min Výkon: 4,0 kW Počet stupňov prevodovky: 1 Upínacie čelo vretena: 5 / DIN 55027 Priemer vretena v čelnom ložisku: 70 mm Priemer priechodného otvoru vretena: 40 mm Použiteľný priemer tyče: 40 mm Držiak náradia: Systém: MultiFix B Priečny prierez držiaka noža: 20 x 20 mm Koník: Pohyb pinoly: 85 mm Priemer pinoly: 40 mm Kužeľ pinoly: MK 3 Posuvy: Počet posuvov: 24 Pozdĺžny posuv: 0,02 – 0,63 mm/otáčka Priečny posuv: 0,006 – 0,2 mm/otáčka Rezanie závitov: Metri cké: 0,25 – 8 mm Palcové: 80-2 1/'' Počet pojazdov: Pojazd v osi X (priečny suport): 150 mm Pojazd v osi Z cez suport: 500 mm Pojazd v osi Z cez horný suport: 110 mm Celkový príkon: 15 kVA Hmotnosť stroja: cca 800 kg Priestorové nároky: 1400 x 935 x 1550 mm Ksdpfow Ebdbex Ab Ssll Príslušenstvo / možnosti: - Dokumentácia - 3-čeľusťové skľučovadlo priemer 160 mm, s čeľusťami - 4-čeľusťové skľučovadlo priemer 160 mm, s čeľusťami - Skľučovadlo na upínanie klieštin, vrátane klieštin - Koník - Multifix držiak s kompletom držiakov - Luneta - Prevodové kolesá - Rôzne druhy náradia - Skrinka Lista - Náhradné diely - atď. Stroj je pod prúdom v našom sklade.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 >> Center height: 120 mm >> Center distance: 430 mm >> Spindle speeds: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Camlock spindle nose KK4 DIN 55027 >> Tailstock quill: MT2 >> Feed rates from 0.03 to 0.15 mm/rev >> Threading capability: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Equipment and Accessories: Kljdpfx Abeu Aftgo Ssl >> 1 pc. 160 mm 3-jaw chuck with 1 set of jaws >> 1 pc. New 125 mm 3-jaw chuck with 2 sets of jaws >> Collet chuck system with collets from 1 mm to 20 mm, in 1 mm increments >> Multifix size A toolpost with 3 tool holders >> Stop >> Change gears About the Machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully operational. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was previously located in a training workshop. This newer generation of Weiler lathes is very user-friendly and can produce surfaces comparable to grinding. Take the opportunity to inspect this machine under power on site and see for yourself its condition.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 Machine No. 1191 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock Morse taper 2 >> Feeds from 0.03 to 0.15 mm/rev Klodpovtp Edsfx Ab Ssl >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Equipment and Accessories: >> 1 x 125 mm three-jaw chuck with 2 sets of jaws >> Collet chuck system with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electrical spindle guard About the machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is of course fully functional. The slides all operate very smoothly and evenly. The Weiler also runs quietly at high spindle speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and is capable of producing ground-like surface finishes. Take the opportunity to inspect this machine under power on site and verify its condition for yourself.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus GS lead and feed screw lathe with 3-axis digital readout Easson ES8 from a training workshop, excellent condition! Technical data: - Year of manufacture: approx. 1990, machine no. 3768 - Centre height: 120 mm - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm in 18 geared steps - Spindle bore: 23 mm - Short taper spindle nose DIN 4 - Tailstock: Morse taper 2 (MT2) Kedpfxovkfhpe Ab Ssll - Feeds: from 0.03 to 0.15 mm/rev - Thread cutting: Metric, inch, module, and diametral pitch threads possible - Metric thread pitches: 0.25 to 2.5 mm - Weight: approx. 360 kg - Dimensions: 1.2 m (L) x 1.3 m (H) x 0.65 m (D) Equipment and accessories: - 3-axis digital readout by Easson ES8 - Collet clamping system from 1 to 20 mm, collets in 1 mm increments with mounting and drawtube - 1 three-jaw chuck with two sets of jaws - 1 four-jaw chuck with two sets of jaws - Multifix quick-change toolpost size A with 3 tool holders - Bed stop - Taper turning attachment About the machine: For sale is a Weiler Primus lead and feed screw lathe, year of manufacture approx. 1990, in outstanding condition. Naturally, the machine is fully functional. All slides move very smoothly and evenly. The bed guides are in very good condition. The Weiler runs quietly even at high speeds. The lathe comes from the training workshop of a large company. This newer generation of Weiler lathes is very user-friendly and capable of producing ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Kedovivmyepfx Ab Sell Technical Data: >> Year of Manufacture: approx. 1990, Machine No. 3150 >> Center Height: 120 mm >> Center Distance: 430 mm >> Spindle Speed: 60 - 3000 rpm, 18 geared steps >> Spindle Bore: 23 mm >> Short Taper Spindle Nose DIN 4 >> Tailstock: Morse Taper No. 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible Threads: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.25 to 2.5 mm >> Engagable Spindle Brake >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: >> 1 piece 3-jaw chuck NEW 125 mm, with 2 sets of jaws >> Multifix size A with 2 tool holders >> Brand new collet chuck system with collets from 3 to 26 mm in 1 mm increments About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and uniformly. The bed guides are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and can produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Stav: veľmi dobrý (použitý), Rok výroby: 1997, Funkcionalita: plne funkčný, Weiler center lathe model Condor B, lead and feed screw lathe with new K&C 3-axis digital readout, CE compliant! Technical data: - Machine No.: 2442, Year of manufacture: 1997 - Center height: 165 mm - Center distance: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Camlock spindle nose DIN 55027, size 5 with bayonet lock - Tailstock: Morse taper 3 - Feeds: from 0.015 to 0.46 mm/rev - Thread types: metric, imperial, module, and diametral pitch Klsdexcuazopfx Ab Ssl - Metric thread pitches: 0.18 to 28 mm - Weight: approx. 1,100 kg - Electrically engageable spindle brake - Dimensions: length 1.83 m, height 1.29 m, depth 0.88 m Equipment & accessories: - New K&C 3-axis digital readout with 12 months manufacturer’s warranty and operating manual. Functions: mm/inch conversion, ABS/INC coordinate selection, value halving, reference mark, tooling program for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal - 1 piece NEW 160 mm 3-jaw chuck with 2 sets of jaws - 1 piece 200 mm 4-jaw chuck with 1 set of jaws - NEW collet chuck and NEW collet set from 3 to 25 mm in 1 mm increments - Multifix size B with 2 tool holders - Bed stop - Electronic spindle protection - Rear splash guard - Machine feet Safety equipment: electronic spindle guard, 2 emergency stop buttons, change gear box with end switch, spindle brake About the machine: For sale is a Weiler Condor in very good condition. The machine is, of course, fully functional. It is a very robust and powerful lathe. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our location.

Stav: veľmi dobrý (použitý), Rok výroby: 2003, Funkcionalita: plne funkčný, Weiler Primus VC precision centre lathe with 3-axis digital readout K&C, NEW with VC variable-speed drive and CE, in very good condition. Technical Data: >> Year of manufacture: 2003, Machine no. 646 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: up to 4,000 rpm, infinitely variable >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MK 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight approx. 800 kg >> Spindle brake, switchable >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Accessories and Equipment: Ksdpfxsw Idlle Ab Sjll >> 3-axis digital readout K&C NEW >> Collet system with collets from 3 to 26 mm, new, 1 mm increments NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> Electrical chip guard >> Machine feet >> Splash guard About the machine: For sale is a Weiler Primus VC screwcutting and feeds lathe, year 2003, in very good original condition. A very fine centre lathe with a VC drive, stepless speed control of the work spindle. The K&C digital readout and scales are new. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be finished close to a ground quality. The K&C DRO makes operation even easier and more precise. You are welcome to inspect and test the machine under power on site, so you can see the condition for yourself.

Stav: veľmi dobrý (použitý), Rok výroby: 1987, Funkcionalita: plne funkčný, Weiler Precision Lathe Model Condor 81, Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout by K&C Technical Data: >> Year of manufacture: 1987 Machine no. 87 835 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Threads possible: Metric, Inch, Module and Diametral Pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Switchable spindle brake >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> NEW K&C 3-Axis Digital Readout, 12-month manufacturer's warranty with operating manual Functions: mm/inch display switch, coordinate selection ABS/INC, value halving, reference point, tool programming for up to 200 tools, taper calculation, radius/diameter mode, quick zero setting, direction of counting switch, etc. >> 1 piece 160 mm 3-jaw chuck, NEW, with 2 sets of jaws >> 1 piece 160 mm 4-jaw chuck, with 1 set of jaws >> Collet chuck and NEW collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 2 toolholders >> Bed stop >> Electronic spindle safety guard Kjdswrmuxopfx Ab Sjll >> Rear panel >> Coolant system >> Machine feet About the Machine: Offered is a used Weiler Condor 81 in very good condition. The machine is, of course, fully functional, has been completely dismantled, and repainted. A very robust and high-performance machine. The new K&C 3-axis digital readout makes work even easier and more precise. The machine has been electrically and mechanically tested in our workshop. A complete oil change has also been performed. This newer generation of Weiler lathes is extremely user-friendly. Take the opportunity to inspect and test the machine under power at our facility.

Stav: veľmi dobrý (použitý), Rok výroby: 1991, Funkcionalita: plne funkčný, Weiler Centre Lathe Model Condor B Lead and Feed Screw Lathe with NEW 3-axis Digital Readout by K&C from Training Workshop!! Technical data: >> Machine-No. 91-1814, Year of manufacture: 1991 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock taper: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and equipment: >> 3-axis digital readout by K&C, new, 12 months manufacturer's warranty, with operating manual Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference mark, tool data for up to 200 tools, taper calculation, radius/diameter display, fast zeroing, counting direction reversal Ksdpfx Abew Nw Dqe Ssll >> 1 piece new 160 mm 3-jaw chuck with 2 sets of jaws >> 1 piece 160 mm 4-jaw chuck with 1 set of jaws >> New collet chuck and new collets from 2 to 24 mm, incremented by 1 mm >> Multifix size B with 2 holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Fixed steady >> Machine feet For safety: electronic spindle guard, 2 emergency stop buttons, change gear case with limit switch, spindle brake About the machine: Offered is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and high-performance machine. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been done. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our site.

Stav: veľmi dobrý (použitý), Rok výroby: 1983, Funkcionalita: plne funkčný, Weiler Centre Lathe Model Condor 81 - Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout from K&C Technical Data: >> Year of manufacture: 1983 Machine No. 83-067 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2,800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Spindle brake, switchable >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> NEW 3-axis digital readout from K&C, 12-month manufacturer warranty with instruction manual Functions: mm/inch switching, ABS/INC coordinate selection, value halving, reference point, 200-tool programming, taper calculation, radius/diameter display, quick zeroing, counting direction switching Kljdewb Supjpfx Ab Ssl >> 1 piece new 160 mm 3-jaw chuck with 2 sets of jaws >> New collet chuck and new collets from 3 to 26 mm, increment 1 mm >> Multifix size B with 3 tool holders >> Electronic spindle protection >> Rear splash guard >> Coolant system >> Machine feet About the Machine: Offered here is a used Weiler Condor 81 in very good condition. The machine is, of course, fully functional. It is a very robust and powerful lathe. The new 3-axis digital readout from K&C makes operation easier and more precise. The machine has been electrically and mechanically tested by us, and a complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test the machine under power on site.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler engine lathe model Condor 81, leadscrew and feed shaft lathe with 3-axis Heidenhain digital readout Technical data: >> Year of manufacture: 1988, Machine No. 88-955 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock taper: MK 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types possible: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight approx. 1,100 kg >> Spindle brake selectable >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and features: Ksdpfx Ajxu Hlaeb Sell >> 3-Axis Heidenhain digital readout >> 1 pc. three-jaw chuck (new) with 2 sets of jaws >> Collet chuck, collets from 3 to 30 mm (40 pcs, some duplicates) >> Multifixed size B with 3 tool holders >> Bed stop >> Machine feet >> Drill chuck >> Live center Safety features: >> Leadscrew and feed shaft cover >> 2 emergency stop buttons >> Spindle brake About the machine: A used Weiler Condor 81 lathe, year of construction 1988, in very good condition is being offered. The machine is, of course, fully functional. For safety, the leadscrew and feed shaft are equipped with a protective cover. This is a very robust and high-performance machine. The 3-axis Heidenhain digital readout makes operation easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was carried out. This newer generation of Weiler lathes is extremely user-friendly. Take the opportunity to inspect and test this machine under power at our location.

Stav: veľmi dobrý (použitý), Priemer sústruženia nad lôžkom 330 mm Vzdialenosť medzi hrotmi 750 mm Otáčky vretena 1–4 500 ot/min Ovládanie: WEILER C3 Rôzne príslušenstvo MARCELS MASCHINEN CH Kodpfx Ajud Naqeb Sjll

Stav: veľmi dobrý (použitý), Top stav, pravidelne servisované (faktúry k dispozícii), veľa príslušenstva! Kodpfx Asxw D S Aob Ssll