Skúšanie materiálov kúpiť použité (477)

Stav: veľmi dobrý (použitý), TIRA Type: TCZ 4022 S -2K Description: Climate simulation chamber, air-cooled System Design: The system consists of the following main assemblies: - Walk-in, insulated chamber - Air handling room - Humidification unit - Machine room - Control cabinet Technical Data: Performance Range for Temperature Testing: - Temperature range: -40 to +140°C - Temperature stability, in supply air (over time): ≤ ±0.5°C (without thermal test chamber load, according to DIN 50011 T13 / EN 60068) - Temperature stability, in supply air (spatial): ≤ ±1.0°C (without thermal test chamber load, according to DIN 50011 / EN 60068) - Heating rate (according to DIN 50011): approx. 2.0 K/min (without thermal test chamber load, according to DIN 50011 / EN 60068), without test object, within -30°C to +85°C - Cooling rate (according to DIN 50011): approx. 2.0 K/min (without thermal test chamber load, according to DIN 50011 / EN 60068), without test object, within -30°C to +85°C Performance Range for Climate Testing: - Temperature range: +10 to +90°C Kodpfxevx S Hhe Akielt - Humidity operating range: 10 to approx. 95% RH (without thermal test chamber load) - Dew point temperature range: +5 to +89°C (without thermal test chamber load) - Humidity stability (in supply air, over time): ≤ ±2.5% RH (measured in supply air) Performance Range for Climate Testing with Heat Compensation: - Temperature range: +15 to +80°C - Humidity: 15 to approx. 80% RH (without thermal test chamber load, with max. 16 kW heat compensation) - Dew point temperature range: +10 to +74°C (without thermal test chamber load) Dimensions: - Test chamber (W x D x H): approx. 2260 x 4648 x 2260 mm - External dimensions (W x D x H): approx. 2660 x 6460 x 2800 mm - Clear door opening test chamber door (W x H): 2260 x 2260 mm - Climate module KB 127 (W x D x H): 1700 x 800 x 1400 mm - Control cabinet (W x D x H): 800 x 500 x 2000 mm Design: - Air guidance: Supply air via perforated sheet at rear wall, ceiling area Exhaust air via perforated sheet at rear wall, floor area - Temperature control: Direct cooling via evaporation of refrigerant in a finned heat exchanger; Heating with electric resistance heater - Dehumidification: Direct dehumidification by evaporating refrigerant in a heat exchanger - Internal lining: Stainless steel - External cladding: galvanized, powder-coated steel sheet - Floor construction: Stainless steel, floor load capacity 15,000 N/m² Wheel load (contact area ≥4 cm²): 1,500 N/wheel - Door: Double-leaf, stainless steel, external painted, with viewing window (W x H) 1000 x 1000 mm - Test chamber illumination: 4 spotlights at 500 W each - Insulation: Double-layer, 80 mm PUR foam, 120 mm mineral wool Refrigeration Unit (1 piece): Bitzer 6G-30.2Y - Refrigerant: R449A - Refrigeration oil: SEZ 32 - Steam humidifier (1 piece): EDB 40 Color scheme: - Chamber: RAL9010, white - Door: RAL9010, white - Machine unit: RAL7032, pebble grey - Control cabinet: RAL7032, pebble grey Weights: - Total system: approx. 4,900 kg - Machine set KB 127: approx. 750 kg - Control cabinet: approx. 120 kg - Humidification unit: approx. 64 kg Connections: - Nominal voltage: 400 V +6% / -10%, 3/PE/N, 50 Hz - Nominal power: 95 kW - Nominal current: 150 A

Stav: veľmi dobrý (použitý), Weiss Model: WK 27'/50-150 Climatic Test Chamber Water-cooled Technical Data: Test Chamber Designation: WK 27'/50-150 External Dimensions Height: 3500 mm, Width: 3400 mm, Depth: 6000 mm Control Cabinet Dimensions Height: 2000 mm, Width: 2400 mm, Depth: 400 mm Internal Dimensions Kedpfx Aovx Nfbjkislt Height: 3000 mm, Width: 3000 mm, Depth: 3000 mm Floor Load: 30000 N/m² (surface load) Test Volume: approx. 27,000 litres Specimen Mass: 1000 kg Cooling / Heating Operation: -50°C to 150°C Heating Rate: 1.0 K/min Cooling Rate: 1.0 K/min Temperature Consistency: ± 0.3 to 1.0 K (over time) Temperature Consistency: ± 0.1 to 0.5 K (over time) Climatic Operation: 10 to 90°C Humidity: 10...98% r.h. Temperature Consistency: ± 0.1 to 0.5 K (over time) Dew Point Range: +4°C to +84°C Power Supply: 3/N / PE AC 400 V ±10% 50 Hz Weight: 7000 kg Refrigerants: R23 and R404A Fitted with additional floor plates to increase load capacity Important information for your safety as a buyer! The following actions are carried out in advance for our chambers offered: 1. Functional inspection and replacement of necessary components 2. Refilling with legally compliant refrigerants 3. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (See photo) (Specifications and data subject to change and errors reserved!) We are happy to answer further questions by phone.

Stav: dobrý (použitý), Weiss Type: Walk-in Climate Simulation Chamber WK 50 / 40-120 Technical data of the climate chamber: Temperature range: -40...+120 °C Temperature tolerance: +/- 0.5°C Temperature change rate: 1 K/min Humidity range: 15...approx. 95% r.h. Humidity tolerance: +/- 5.0% r.h. Dimensions: Test chamber volume: 50 m³ External dimensions (W x D x H): approx. 4800 mm x 6100 mm x 2640 mm Test chamber (W x D x H): approx. 4500 mm x 5000 mm x 2200 mm Kjdeuvi R Aepfx Akielt Door opening (W x H): approx. 3000 mm x 2200 mm Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and error!) Please feel free to contact us by phone for further questions.

Stav: dobrý (použitý), RS Simulators Type: Walk-in Climate Simulation Chamber KKC 22/45L Kledpfx Akeuvi Nfjiet Technical Specifications: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.5°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95% RH Humidity tolerance: +/- 5.0% RH Dimensions: Test chamber volume: 22 m³ External dimensions (W x D x H): approx. 2600 mm x 6400 mm x 2800 mm Test chamber (W x D x H): approx. 2200 mm x 4700 mm x 2300 mm Door opening (W x H): approx. 2200 mm x 2300 mm Year of manufacture: 2009 Technical data for solar simulation: Control unit: Mitronic STB1-8 Number of lamps: 8 Ballast: Mitronic CP2k5 – 2ZS Ignition unit: Hönle Lamp type: OSRAM Powerstar HQI 2000W W/D/S Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) For further questions, please contact us by phone.

Stav: dobrý (použitý), RS Simulators Type: Walk-in Climate Simulation Chamber KKC 22/45 Technical Data: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.5°C Rate of temperature change: 1 K/min Humidity range: 10...approx. 95% RH Humidity tolerance: +/- 5.0% RH Dimensions: Test chamber volume: 22 m³ External dimensions (W x D x H): approx. 2600mm x 6400mm x 2800mm Test chamber (W x D x H): approx. 2200mm x 4700mm x 2300mm Door opening (W x H): approx. 2200mm x 2300mm Condition: used Klsdpfouviydox Akiot Scope of delivery: (See picture) (Subject to change and error in technical data, specifications may vary!) For further questions, please feel free to contact us by phone.

Stav: veľmi dobrý (použitý), Here we offer a Feutron climate test chamber. Feutron Climate Test Chamber Temperature - Temperature range: -40...90°C - Climate range (without thermal load): 10...85°C - Temporal temperature deviation during temperature mode: ≤ ± 0.5 K/min - Temporal temperature deviation during climate mode: ± 1.0...± 1.5 K/min Change rates - Heating: average 2.0 K/min - Cooling: average 2.0 K/min The IEC 1646 standard can be tested, with solar modules up to a max. weight of 160kg and nonlinear ramps (setpoint step). Drying - Air drying: condensation drying Humidity - Air humidification: steam humidification - Humidity range: 10...95 % r.H. - Temporal humidity deviation: ≤ ± 3.0...±5.0 % r.H. - Dew point range: 8...80.9°C Kjdpfsklv H Iex Akislt Test Chamber - Test chamber volume: 7.0 m³ Dimensions - Test chamber dimensions: width 1500 mm x height 2250 mm x depth 2000 mm - Hinged door DIN right, heated: width 900 mm x height 2100 mm - Observation window, heated, with blackout shutter and lockable: width 500 mm x height 600 mm - Feedthrough: 2x right side front, ∅ 75 mm Irradiation Unit (test chamber) - Cutouts: 4x on left side wall for SC 2500, each 850 x 700 mm - Area irradiated with SC 2500: 1200 x 1200 mm - Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² - Lighting: 1x halogen lamp 200W Refrigeration System - Bitzer semi-hermetic 2-stage compressor, air-cooled - Condenser: split-type (outdoor installation, winter control) - Refrigerant: R507 / R23 Temperature Control System - Cooling brine medium: Tyfocor / water - Mixing ratio: 50/50% - Brine density: 1.072 kg/dm³ - Filling capacity: approx. 80 dm³ Pyranometer - Temperature range: -40...150°C - Max. radiation input: 4000 W/m² - Spectral range (50% points): 305...2800 nm - Sensitivity (nominal): 7 µV/W/m² Electrical Supply (test chamber) - Supply voltage: 400V, 3/N/PE, AC, 50Hz - Connection type: fixed connection - Max. simultaneous power requirement: approx. 32.0 kW - Supply fuse: 3 x 63 A, type C Electrical Supply (SolarConstant) - Supply voltage: 400V, 3/N/PE, AC, 50Hz - Connection type: fixed connection - Max. simultaneous power requirement: approx. 30.0 kW - Supply fuse: 3 x 63 A, type C External Dimensions of Test Chamber (complete with technical/aggregate room and control cabinet for SolarConstant 2500): - Technical/aggregate room: width 3440 mm x height 2580 mm x depth 2950 mm - Control cabinet: width 2200 mm x height 1830 mm x depth 1100 mm - External dimensions of split condenser: width 900 mm x height 950 mm x depth 2000 mm Weight - Test chamber (total): approx. 2700 kg - Condenser (empty): 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see images) (Subject to changes and errors in the technical data and specifications!) For further questions, we are happy to assist you by phone.

Stav: dobrý (použitý), TIRA Type: Walk-in Climate Simulation Chamber TCZ 4012 S(m) Technical Data: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.0°C Rate of temperature change: 1 K/min Humidity range: 10...approx. 95 % r.H. Humidity tolerance: +/- 5.0 % r.H. Dimensions: Test chamber volume: 13 m³ Klodpfx Akouvipwsiet External dimensions (W x D x H): approx. 2260mm X 3850mm X 2780mm Test chamber (W x D x H): approx. 2254mm X 2645mm X 2251mm Door opening (W x H): approx. 2251mm X 2254mm Condition: used Scope of delivery: (see image) (Specifications and technical data subject to change and error!) If you have any further questions, please feel free to contact us by phone.

Stav: dobrý (použitý), TIRA Type: Walk-in Climate Simulation Chamber TCZ 4020 S-2k Technical Specifications: Temperature Range: -40...+140 °C Temperature Tolerance: +/- 1.0°C Rate of Temperature Change: 2 K/min Humidity Range: 10...approx. 95% rH Humidity Tolerance: +/- 5.0% rH Dimensions: Kledjuviumepfx Akijt Test Chamber Volume: 19 m³ External Dimensions (WxDxH): approx. 2660 mm x 4960 mm x 3300 mm Test Chamber (WxDxH): approx. 2270 mm x 3190 mm x 2756 mm Door Opening (WxH): approx. 2270 mm x 2756 mm Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors. All information is without guarantee!) For further questions, please feel free to contact us by phone.

Stav: použitý, mytron typ: T2240 Vodou chladená teplotná komora Technické údaje: Vonkajšie rozmery: šírka 1435 mm, výška 1955 mm, hĺbka 2590 mm Rozmery testovacej komory: šírka 1050 mm, výška 1400 mm, hĺbka 1600 mm Objem testovacej komory: cca 2240 l Priechod pre káble: 2 x 100 mm vpravo 2 x 100 mm vľavo Rozsah teplôt: – 40 °C až + 100 °C pri teplote okolitého prostredia 23 °C Časová stálosť teploty: +/- 0,5 °K Priestorová stálosť teploty: +/- 1,0 °K Chladenie: vodné chladenie, prívod a odvod 1" vnútorný závit Uzávierka chladiacej vody magnetickým ventilom pri vypnutom zariadení Signalizácia poruchy pri poruche chladiaceho zariadenia Spotreba chladiacej vody: vstupná teplota cca 15 °C, cca 15 l/min, výstupná teplota cca 22 °C (pri nepretržitom chladení cca 27 °C) Pripojenie na sieť: 3NPE AC 50 Hz 400 V, 32 A CEE zástrčka Výkonová spotreba: cca 6,5 kVA Istenie: 3 x 20,0 AT, 3 x 10,0 AT Osvetlenie: po 25 Wattov na ľavej a pravej strane testovacej komory Odtah pripojenie: DN 100 mm zásuvný systém Bezpečnostné zariadenie: elektronická ochrana proti prehriatiu, pevne nastavená Kledpfevtl Hqox Akiet Monitorovanie spalín s akustickým signálom Pozorovacie okno: päťvrstvové zasklenie 130 x 360 mm Chladivo: R 404 A, cca 10 kg Hmotnosť: cca 850 kg Stav: použitý Dodávka: (pozri obrázok) (Zmeny a chyby v technických údajoch vyhradené!) Ďalšie otázky radi zodpovieme telefonicky.

Stav: veľmi dobrý (použitý), We offer you a Thermotron temperature chamber. Water-cooled Thermotron Temperature Chamber SE-1000-6-6 Internal dimensions (W x D x H): 1000 x 1000 x 980 mm Usable volume: approx. 980 liters Klodpfxjixtite Akiot Temperature range: -70°C to +180°C Overall heating rate: approx. 4.1 K Overall cooling rate: approx. 1.2 K Heating capacity in °C/min (–65°C to +71°C): 6.8°C Heating capacity in °C/min (–65°C to +180°C): 5.6°C Heating capacity in °C/min (–40°C to +85°C): 6.5°C Cooling capacity in °C/min (+85°C to –40°C): 4.7°C Cooling capacity in °C/min (+71°C to –65°C): 3.7°C Cooling capacity in °C/min (+180°C to –65°C): 4.3°C External dimensions (W x D x H): 1250 x 1900 x 2200 mm Electrical requirements: 400V/5P/N/PE, 35 A Refrigerants: R508B and R404A Approximate weight: 900 kg Type: Thermotron SE-1000-6-6 Buyer safety information: The following processes are completed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New charge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run using calibrated instruments. Condition: used Scope of supply: (see picture) (Technical data and specifications subject to change and errors!) We are happy to answer any further questions by phone.

Stav: veľmi dobrý (použitý), CTS Typ: TW -60/9 Water-cooled Temperature Test Chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: lowest temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specifications: Cooling system: Water-cooled, low-noise, semi-hermetic, stepless capacity control by electronic monitoring and control system, environmentally friendly refrigerants R23 / R404A Control: 32-bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Kljdpfxjvb Hano Akijt Free switching channels for external specimen control Technical Performance Data: Temperature Testing: Temperature range: -60 °C to +100 °C Temperature deviation: ±0.1 to 0.5 K over time Temperature change rate (average, measured with specimen and heat radiation in supply air): Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test specimen: 420 kg solar modules tracking 100% Heat radiation: 3000 watts permanently Technical data refer to ambient temperature +25 °C, rated voltage 400 V, without test specimen, no heat input, and without additional devices. Dimensions: Test volume: 9 m³ External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm Internal test chamber dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: Power supply: 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power: 48.9 kW; Rated current: 74.9 A Protection class: IP 54 Cooling water connections: cooling water inlet/outlet R1 ¼” female thread Condensate drain (non-pressurized) R1” female thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.

Stav: veľmi dobrý (použitý), CTS Typ: TW -60/9 Water-cooled Temperature Test Chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: lowest temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specifications: Kjdjvb E Uqspfx Akislt Cooling system: Water-cooled, low-noise, semi-hermetic, stepless capacity control by electronic monitoring and control system, environmentally friendly refrigerants R23 / R404A Control: 32-bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for external specimen control Technical Performance Data: Temperature Testing: Temperature range: -60 °C to +100 °C Temperature deviation: ±0.1 to 0.5 K over time Temperature change rate (average, measured with specimen and heat radiation in supply air): Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test specimen: 420 kg solar modules tracking 100% Heat radiation: 3000 watts permanently Technical data refer to ambient temperature +25 °C, rated voltage 400 V, without test specimen, no heat input, and without additional devices. Dimensions: Test volume: 9 m³ External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm Internal test chamber dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: Power supply: 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power: 48.9 kW; Rated current: 74.9 A Protection class: IP 54 Cooling water connections: cooling water inlet/outlet R1 ¼” female thread Condensate drain (non-pressurized) R1” female thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.

Stav: veľmi dobrý (použitý), CTS CW‑60/11 – Vodou chladená klimatická testovacia bunka Model CW‑60/6 od CTS GmbH (Climatic Test Systems) je stredne veľká, priechodná alebo pojazdná klimatická komora určená na vykonávanie teplotných a vlhkostných testov na viacerých vzorkách súčasne. Popis zariadenia: Klimatická testovacia bunka umožňuje testovanie funkcie alebo materiálových vlastností skúšaného predmetu pri vystavení vplyvu teploty a vlhkosti. Efektívne prúdenie vzduchu s vysokým objemom cirkulačného vzduchu zaručuje vynikajúci prenos na testovanú vzorku. Priestor pre úpravu vzduchu sa nachádza na zadnej strane vnútorného priestoru. Agregáty sú umiestnené za zariadením v samostatnom ráme, sú dobre prístupné. Riadiaca jednotka je umiestnená v samostatnej rozvádzačovej skrini, ovládací panel je integrovaný do dverí rozvádzača. Na odvlhčovanie testovacieho priestoru je bunka vybavená samoobnovovacím sušičom stlačeného vzduchu. Čerstvý vzduch je možné privádzať do testovacieho priestoru ventilátorom. Technické údaje: Teplotné testy: - Teplotný rozsah: –60 °C až +90 °C - Odchýlka teploty v čase: ±0,5 až 1 K - Odchýlka teploty v priestore: ±1 K vo vzdialenosti 200 mm od steny - Rýchlosť zmeny teploty (prívod vzduchu, lineárna): - Ohrievanie: 2 K/min od –40 °C do +85 °C - Chladenie: 2 K/min od +85 °C do –40 °C Klimatické testy: - Teplotný rozsah: +10 °C až +95 °C - Rozsah vlhkosti: 10 % až 95 % relatívnej vlhkosti - Rozsah rosného bodu: +5 °C až +89 °C - Odchýlka teploty v čase: ±0,5 K - Odchýlka vlhkosti v čase: ±2 – ±5 % relatívnej vlhkosti - Bez tepelného vyžarovania - V ustálenom stave - Technické údaje platia pre okolitú teplotu +25 °C, menovité napätie 400 V, bez testovaného predmetu, bez tepelného žiarenia a bez prídavných zariadení. Rozmery: - Vnútorné rozmery (testovací priestor/užitkový priestor): - Objem: cca 11 000 litrov (11 m³) - Vnútorné rozmery (cca): šírka: 2100 mm, hĺbka: 2530 mm, výška: 2200 mm (v závislosti od konfigurácie môžu byť mierne odlišné) - Vonkajšie rozmery: šírka: 2700 mm, hĺbka: 5200 mm, výška: 2520 mm (v závislosti od dverí, rámu, príslušenstva atď.) Prevádzkové údaje: - Menovitý výkon: 84,4 kW - Menovité napätie: 400 V 3/N 50 Hz - Menovitý prúd: 131,4 A Kjdpfxjx Anipo Akijlt Technické vyhotovenie: - Chladiaca jednotka - Vodou chladená, tichá prevádzka, polohermetická, - plynulé prispôsobovanie výkonu pomocou elektronického monitorovacieho a riadiaceho systému, - ekologické chladivá R 23 / R 404 A Hmotnosť: 6000 kg Poznámky: - Obhliadka možná po dohode (46325 Borken) - Preprava prostredníctvom logistickej spoločnosti možná – náklady a podmienky na vyžiadanie - Rozsah dodávky: (pozri obrázok) - Zmeny a omyly v technických údajoch vyhradené! Ak máte ďalšie otázky, radi Vám odpovieme telefonicky.

Stav: veľmi dobrý (použitý), RS-Simulators Model: KKM 110/45 Manufacturer: RS-Simulators, water-cooled Climate chamber 110 m³ incl. condenser The KKM 110/45 is part of the TKM/KKM modular construction series by RS-Simulators—a modular climate chamber that is assembled on-site. This design offers: Modularity: Individual segments are pre-assembled and installed at the customer's location. This allows for easy retrofitting (increased depth or additional modules) and uncomplicated relocation at a later date. Technical specifications of the climate chamber: Manufacturer: RS-Simulators Prüf- und Messtechnik GmbH Model: KKM 110/45 Kjdowwg Uvspfx Akislt External dimensions: 6,200 x 9,400 x 3,400 mm (W x D x H), incl. technical attachments Internal dimensions: 5,900 x 7,000 x 2,960 mm (W x D x H) Chamber door (double-leaf): 3,600 x 2,930 mm (W x H) Personnel door (single-leaf) in side wall: 1,880 x 900 mm (H x W) Feedthroughs: 8 x Ø120 mm (4x left & 4x right) Windows: 1x (460 x 550 mm) in front chamber door, heated; 1x (1,260 x 1,000 mm) in left side wall, heated Temperature range: -40°C to +120°C Temporal deviation: ± 0.8K – 1.5K according to DIN 50011 (empty test chamber) Humidity range: 10% to 95% Humidity tolerance: +/- 5.0% Refrigerant: 2x R404A 52 kg; 2x R23 17 kg Temperature variation rate: heating: 1.0 K/min; cooling: 1.0 K/min Electrical data: Voltage: 3x400V/N/PE; Current: 340A Weight: approx. 2,000 kg Important safety information for buyers! The following points are completed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, a new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors. Specifications are non-binding!) If you have further questions, we will be happy to answer them by phone.

Stav: veľmi dobrý (použitý), Here we offer you a walk-in climate chamber. Manufacturer: RS-Simulatoren, water-cooled The chamber can be disassembled into 3 parts for transport (bolted) Temperature range: -30°C to +100°C Refrigerants: 20kg R-404A + 20kg R-452A Kjdsqw U Aaepfx Akijlt External dimensions: approx. width 3920 mm, depth 7350 mm, height 2600 mm Test chamber dimensions: approx. width 3500 mm, depth 5400 mm, height 2110 mm Electrical data: 68kW rated power Voltage: 3x400V/PE, current: 135A Type: KKM 40 / 45 S Further technical data to follow! For your safety as a buyer, please note the following information: The following work is carried out on all chambers we offer before delivery: 1. Functional check and replacement of necessary components 2. If required, new charge with legislatively compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors!) We are happy to answer any further questions for you by phone.

Rok výroby: 2009, stav: pripravené na použitie (použité), K dispozícii je soľná sprejová komora Köhler na korózne skúšky materiálov a komponentov. Objem skúšobného priestoru: 1000 l, stálosť teploty: +/-1K, rozsah tlaku vody: 2,5bar-5bar, vnútorné rozmery X/Y/Z: 1250mm/950mm/760mm, rozmery stroja X/Y/Z: cca 2100mm/1400mm, hmotnosť: cca 350kg. Dokumentácia je k dispozícii. Možnosť obhliadky na mieste. Kledjyu T Dkspfx Akijt

Rok výroby: 1982, stav: použitý, Technické detaily: Z-dráha: 260 mm Maximálna lisovacia sila: 49 - 7355 (skúšobné zaťaženie) N Skúšobná výška: 260 mm Hmotnosť obrobku: max. 160 kg Vyloženie: 200 mm Rozhranie: RS 232 Napájacie napätie: 230V / 50Hz Celkový príkon: 200 VA Hmotnosť stroja cca: 250 kg (bez spodnej skrinky) Rozmery stroja cca (DxŠxV): 0,7 x 0,6 x 1,8 m (so spodnou skrinkou) Kodpou N Avxefx Akielt Tvrdosťomer s prevádzkovým režimom hĺbkového merania je na predaj vrátane spodnej skrinky (od Emco pre tvrdosťomery). Toto zariadenie je vhodné na skúšanie podľa nasledujúcich metód (údaje podľa výrobcu): - Kovy: Brinell, Vickers, Rockwell - Plast: podľa DIN 53 456 - Iné materiály: iba po konzultácii s výrobcom. Skúšobné zaťaženie je elektronicky riadené mikroprocesorom, tenzometrom a DC motorom pre M4R-075 = 49 až 7355 N. Skúšobný stôl, priemer 90 mm, výškovo nastaviteľný pomocou ručného kola Držadlo skúšobného stola podľa DIN 51 225 = Ø 25 mm Ovládanie a programovanie pomocou ovládacieho panela s grafickým podsvieteným LC displejom. Príslušenstvo: Ďalšie skúšobné stoly/dosky ako na fotografii Na vyžiadanie.

Stav: veľmi dobrý (použitý), Vötsch Vötsch Industrial Tempering Oven VTL 200/250/225 250°C 11.25 m³ 58 kW – Heating Cabinet The oven will be available at a later date. Description: For sale is an industrial tempering oven / heating cabinet from Vötsch Industrietechnik GmbH. This unit is ideal for industrial tempering, drying, and heat treatment processes. Thanks to the large usable chamber, it is possible to process large or multiple components at once. The oven is controlled via a JUMO IMAGO 500 controller, enabling precise temperature management and automated programming. Kodpfx Akjytrzfoislt Typical applications: - Industrial production - Plastics and metal processing - Component drying - Heat treatment - Testing technology / Material testing - Laboratory and R&D applications The system is built in heavy-duty industrial quality and designed for continuous operation. Technical Data: Manufacturer: Vötsch Industrietechnik GmbH Model: VTL 200/250/225 Maximum temperature: 250 °C Temperature safety class: TB Class 1 TWB Class 2 Chamber: Usable volume: 11.25 m³ Internal dimensions: Width: 2000 mm Height: 2500 mm Depth: 2250 mm External dimensions: Width: 2900 mm Height: 3530 mm Depth: 2700 mm Load capacity: Internal housing load capacity: 400 kg Floor load: 1000 kg Weight: Net weight: 1850 kg Electrical Data: Connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated current: 90 A Rated power: 54 kW Connected load: 58 kW Additional Data: Minimum exhaust airflow: 600 m³/h Reduced exhaust airflow: 150 m³/h Purge time: 465 s Total steam chamber volume: 14.9 m³ Sound pressure level: < 70 dB(A) High limit shutoff temperature: 280 °C Adjustable upper temperature limit: 270 °C Weight: 1850 kg Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data and specifications!) For further questions, feel free to contact us by phone.

Stav: veľmi dobrý (použitý), Rok výroby: 2022, Binder BINDER KB 720 Cooling Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) cooling incubator, year 2022, equipped with the advanced safety and performance test package "P Plus". This device is not a standard laboratory incubator, but a high-quality safety test chamber, specifically designed for aging, performance, and safety tests of lithium-ion energy storage systems. Key Added Value: The unit is designed to safely detect, monitor, and contain critical battery events — up to EUCAR Hazard Level 5 (fire/flame risk, no explosion). What can the device actually do? (Section 2 – Performance & Application) - Conduct aging tests on lithium-ion cells - Performance tests (charge/discharge cycles at controlled temperatures) - Extended temperature range and cycle testing - Testing of both unpowered and cyclically powered cells - Reproducible, precise temperature control throughout the usable chamber - Safe test execution under true-to-life thermal conditions - Ideal test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: - Battery & cell manufacturers - Research and development laboratories - Test laboratories & safety inspection - Automotive / E-mobility / Energy storage The P Plus package transforms the KB 720 into a genuine battery safety test chamber: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Fire alarm with optical & acoustic warning - Mechanical double-door lock (secure containment) - Spark protection inside the chamber - Exhaust connection with reversible overpressure valve - Feed-throughs for external inerting (e.g., nitrogen) - Emergency stop / manual fire extinguishing release - Access ports for charging and measurement cables Result: The unit is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames may occur without explosion or uncontrolled spread. Not an abuse or destruction tester, but a safe, standards-compliant test chamber for real-world operational and fault scenarios. Technical Key Data: - Temperature range: –10 °C to +100 °C - Internal volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: - Power supply: 200–240 V AC - Frequency: 50/60 Hz - Phase: single-phase - Power draw: approx. 2.1 kW - Fuse: 16 A - Refrigerant: R134a - Protection class: IP 20 Dimensions & Weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm - Weight: approx. 285–300 kg In Summary – Why this device is special: - True battery safety test chamber - Suitable for EUCAR Hazard Level 5 Klodpfxjx Sc Ino Akijt - Integrated CO₂ fire suppression system - Large chamber (≈700 L) - High market & resale attractiveness Condition: used Scope of delivery: (see image) (Technical data subject to change and errors excepted!) For further questions, please contact us by phone.

Stav: veľmi dobrý (použitý), Rok výroby: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the extended safety and performance test package "P Plus". This unit is not a standard laboratory incubator, but a high-quality safety test chamber specifically developed for aging, performance, and safety tests of lithium-ion energy storage systems. Special Added Value: The device is designed to safely detect, monitor, and contain critical battery events – up to EUCAR hazard level 5 (fire/flames, no explosion). What exactly can the device do? (Section 2 – Performance & Application) - Conduct aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under temperature) - Long-duration thermal and temperature cycle tests - Tests with both unpowered and cyclically powered cells - Reproducible, precise temperature control throughout the usable chamber - Safe execution of tests under realistic thermal conditions - Test environment for R&D, automotive, e-mobility and energy storage technology Suitable for: - Battery & cell manufacturers - Research and development laboratories - Test laboratories & safety testing - Automotive / e-mobility / energy storage The P Plus package turns the KB 720 into a true battery safety test chamber: Integrated Safety Features: Kedpfex Hf A Rex Akijlt - Automatic & manual CO₂ fire suppression system - Smoke detector with optical & acoustic alarm - Mechanical double-door locking (safe containment) - Spark protection in interior - Exhaust port with reversible overpressure flap - Ports for external inertisation (e.g. nitrogen) - Emergency stop / manual activation of extinguishing system - Pass-throughs for charging and measurement cables Result: The unit is designed for tests on lithium-ion cells up to EUCAR hazard level 5, where fire or flames may occur without leading to explosion or uncontrolled spread. Not an abuse or destruction test device, but a safe, standards-compliant test chamber for real operational and fault scenarios. Technical Core Data: - Temperature range: –10 °C to +100 °C - Interior volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fusing: 16 A - Refrigerant: R134a - Protection class: IP 20 Dimensions & Weight: - Exterior (W × H × D): approx. 1250 × 1950 × 900 mm - Interior (W × H × D): approx. 970 × 1250 × 576 mm In short – why this device is special: - True battery safety test chamber - Suitable for EUCAR hazard level 5 - Integrated CO₂ extinguishing system - Large chamber (≈700 l) - High market and resale attractiveness - Weight: approx. 285–300 kg Condition: used Scope of supply: (See picture) (Subject to change and errors in technical data, information subject to confirmation!) If you have further questions, we are happy to answer them by phone.

Stav: takmer ako nový (použitý), Rok výroby: 2017, 1,0 ks. Bezkontaktný testovací systém s vysokovýkonnou infračervenou kamerou NOXANT, možnosť kontroly 400 dielov za minútu. Kamera Výrobca: NOXANT Typ: Noxcam640-IMD Rok výroby: 2017 Ksdpewufpyofx Akijlt Technický list k dispozícii na požiadanie. Riadenie: Výrobca: IMDvista Rok výroby: 2017 Celý systém je zabudovaný v bunke firmy Beck – Švajčiarsko.

Stav: pripravené na použitie (použité), Binder ED 240 / E2 sušiaca pec, inkubátor, vyhrievacia skriňa, liahňová skriňa č. 1147 Menovitá teplota: 300°C Vnútorné rozmery: 800 mm × 500 mm × 600 mm (š × h × v) Vonkajšie rozmery: 1040 mm × 800 mm × 820 mm (š × h × v) Hmotnosť: cca 85 kg Výkon: 2,70 kW Kjdpfeyvun Iex Akijlt Radi Vás privítame na obhliadke zariadenia. Na požiadanie Vám vieme zabezpečiť cenovo výhodnú prepravu. K vybaveniu dostanete riadny daňový doklad. Pre zahraničných zákazníkov je možné vystaviť faktúru bez DPH – podmienkou je platné IČ DPH. Predávame aj inde – predbežný predaj je vyhradený. Navštívte náš e-shop a pozrite si aj ďalšie inzeráty v našej ponuke. Uvedené obchodné mená a značky patria ich príslušným vlastníkom a slúžia len na identifikáciu a popis produktov. Vyhradzujeme si právo na technické zmeny a možné chyby v popise zariadenia.

Rok výroby: 2021, stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, Metallografický brúsny a leštiaci stroj Metkon FORCIPOL 202 bol zakúpený v roku 2021. Zariadenie nebolo nikdy použité. Výrobca: Metkon Model: FORCIPOL 202 Počet kotúčov: 2 Rýchlosť kotúčov: 50-600 ot./min Kjdpfxsy Hpphs Akislt Smer otáčania kotúčov: v smere/oproti smeru hodinových ručičiek Rozmery (ŠxHxV, cm): 87 x 74 x 34 Hmotnosť (kg): 45 Ak máte otázky alebo potrebujete viac informácií, neváhajte mi napísať správu alebo zavolať.

Rok výroby: 2014, stav: použitý, Funkcionalita: plne funkčný, číslo stroja/vozidla: 13RO210, Ponúkame tento použitý mobilný spektrometer Oxford Instruments PMI-MASTER Pro, rok výroby 2014. Kjdsywwr Sjpfx Akislt Modelový rok: 2014 Vstupné napätie: 24 V DC Výkon: 500 VA Spektrometer sme zakúpili ako nový, pravidelne ho servisovala spoločnosť Oxford Instruments Analytical GmbH a je v plne funkčnom, dobrom stave. Posledný servis: 09/2024. Zariadenie bolo v prevádzke do 09/2025. Ak máte otázky alebo potrebujete ďalšie informácie, neváhajte nás kontaktovať správou alebo telefonicky.

Rok výroby: 2011, stav: použitý, Funkcionalita: plne funkčný, Universal Testing Machine Inspekt Table Blue 5kN Mechanical construction: Kljdpfx Akoyyu I Noiot 2 backlash-free ball screw drives, powered by a DC servo motor, Fmax = 10 kN, stiffness 10 kN/mm 1 test space up to nominal load: Test space width: 420 mm Maximum test stroke without test tools, adapters, and KMZ: 1025 mm Travel speeds: Test speed: 0.0015 - 1000 mm/min at full load Return speed: 1000 mm/min Force measurement: Measuring range: 0.8 - 100% of nominal load, accuracy class 1 (optionally class 0.5) (+/- 1% of the displayed value in accordance with DIN EN ISO 7500-1) Force measurement resolution: +/-180,000 digits at 20 ms integration time The machine is delivered with a factory test certificate. If the customer requires a factory or DKD calibration at the installation site, this will incur an additional charge. Crosshead position measurement: Incremental square-wave input with encoder monitoring, storage of crosshead position Resolution of crosshead travel measurement: 1 µm Dimensions (W x D x H) / Weights: Load frame: 685 mm x 550 mm x 1420 mm / 100 kg - Controller on the load frame Standard functions: Force, displacement, and strain control Overload protection, automatic force calibration, specimen break detector, return function, manual operation via control panel with display (force, displacement) Data processing: USB 2.0 interface or LAN, Data transmission rate to PC: 50 Hz (standard), optionally higher data acquisition rate via special software add-on module Internal data processing rate: 2 ms Optional: maximum of 2 free slots for expansion cards (1-channel analog cards or 2-channel digital cards) available for additional sensors 115/230 VAC, 0.5 kVA, 50/60 Hz, 5-40°C, 20-80% humidity Required options for operation: Load cell, grips, PC (current standard, operating system 8-10-11, test software) Load Cell 5000N Measuring range: 5-5000N tension and compression, with nominal 2mV/V output signal, overload protection: +/-100%, linearity: +/-0.05%, hysteresis: +/-0.03%, repeatability: +/-0.02%, incl. 1.5m connection cable and calibration certificate. With Extensometer MFX 200 The MFX 200-B extensometer, with its robust design and high measuring accuracy, is suitable for almost all specimens starting from an initial gauge length of 10 mm. All strains, from the modulus of elasticity to specimen break, can be measured. The device is suitable for use in both the upper and lower test space without restrictions. In conjunction with the MFQ-A, r- and n-values can be determined for thin sheets. Two measuring systems are available, with differences in signal output and specific technical data (see technical documentation).