Skúšanie materiálov kúpiť použité (481)

Stav: veľmi dobrý (použitý), Weiss Model: WK3 600/0-M Weiss Climate Test Chamber, Water-Cooled Fsdpeziywrefx Aqqjpi Series Type: WK3-../0 with SIMPAC* control system Test chamber volume: approx. 600 litres Test chamber dimensions: Height 950 mm x Width 800 mm x Depth 800 mm External dimensions: Height 1995 mm x Width 1090 mm x Depth 1660 mm Operating Data: Test chamber lighting: LED 24 V, 6.8 W / Halogen bulb 2 x 24V, 50W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 2.3 kW Rated current: 10 A Customer-side fuse: 16 A slow-blow Protection rating (control cabinet and control panel): IP 54 Maximum heat emission to environment: 1200 W Sound pressure level: approx. 46 dB(A), measured at 1m from the front, 1.6m height Data for Temperature Testing: Temperature range: -5°C to +90°C Temporal temperature deviation at chamber centre: ± 0.1 to ± 0.5 K Local temperature deviation: ± 0.5 to ± 1 K Temperature gradient (according to IEC 60068-3-5) Temperature change rate: Heating 0.6 K/min, Cooling 0.3 K/min Heat compensation at +20°C to +50°C: 200 W Data for Climate Testing: Temperature range: +10°C to +90°C Dew point range: 4°C to +89.5°C Humidity range: 10 to 98 % RH Temporal temperature deviation at chamber centre: ± 0.1 to ± 0.3 K Local temperature deviation: ± 0.5 to ± 1 K Temporal humidity deviation: +1 to +3 % RH Refrigerant: R-404A Weight: 610 kg Important information for you as a buyer for your safety! The following procedures are carried out in advance on all chambers we offer: 1. Functional testing and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Following successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used / gebraucht Scope of delivery: (see image) (Specifications and technical information subject to change and error!) If you have further questions, we will be happy to answer them by phone.

Stav: veľmi dobrý (použitý), Vötsch Climate Test Chamber We offer here a Vötsch climate test chamber. Model: VC³ 4100, air-cooled Temperature change rate: 3 K/min Test chamber dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Unit dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Volume: 990 liters Access ports: Ø 125 mm, Ø 50 mm Fodpfx Aqeziywloqepi Specifications for temperature testing: Temperature range: -42°C to +180°C Temperature deviation over time: ± 0.1 to ± 0.5 K Temperature uniformity (spatial): ± 0.5 to ± 1.5 K Temperature change rate: Heating: 4.0 K/min Cooling: 3.0 K/min Max. heat compensation at +20°C: 4500 W Specifications for climate testing: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% RH Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature uniformity (spatial): ± 0.5 to ± 1.0 K Humidity deviation over time: ± 1 to ± 3% RH Max. heat compensation: 500 W Voltage: 3/N/PE AC 400V ± 10% 50Hz Rated power: 11.5 kW Rated current: 22.0 A Refrigerant: R-404A Weight: approx. 840 kg Type: VC³ 4100 For your safety as a buyer, please note the following information! The following steps are performed on all chambers we offer BEFORE sale: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chamber is subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Stav: veľmi dobrý (použitý), Vötsch Type: VT³ 4150/S Vötsch Temperature Test Chamber Water-cooled Rated voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 11.5 kW Rated current: 22.0 A Rate of change: Cooling approx. 3.5 K/min Rate of change: Heating approx. 4 K/min Temperature testing Temperature range: -40°C to +180°C Layout plan External dimensions (W x D x H): approx. 1390 x 2380 x 1995 mm Test chamber dimensions (W x D x H): approx. 1100 x 1475 x 950 mm Weight: approx. 1020 kg / 1540 liters Refrigerant R 404A For your safety as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functional inspection and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Fodpfx Aeziyvueqqjpi Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications reserved!) If you have any further questions, we would be happy to answer them by phone.

Stav: veľmi dobrý (použitý), Vötsch Model: VC³ 0100 Fpodpfeziypusx Aqqsi Vötsch Climate Test Chamber, Air-Cooled Test Chamber Dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Unit Dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Chamber Volume: 990 liters Temperature Testing: Minimum Temperature: -0°C Maximum Temperature: +90°C Temperature Change Rate Cooling: 0.2 K/min Temperature Change Rate Heating: 0.5 K/min Temporal Temperature Deviation: ±0.1 to ±0.5 K Spatial Temperature Uniformity: ±0.5 to ±1.0 K Heat Compensation at +20°C: 350 W Climatic Testing: Minimum Temperature: +10°C Maximum Temperature: +90°C Dew Point Temperature Range: +4°C to +89.5°C Humidity Range: 10 to 98% RH Temporal Humidity Deviation: ±1 to ±3% RH Temporal Temperature Deviation: ±0.1 to ±0.3 K Spatial Temperature Uniformity: ±0.5 to ±1.0 K Voltage: 1/N/PE AC 230V ±10% 50Hz Nominal Power: 2.3 kW Nominal Current: 10 A Refrigerant: R-404A Weight: approx. 1400 kg Important Information for Buyers: For your assurance, the following measures are taken on all our chambers prior to sale: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors reserved!) For further questions, feel free to contact us by telephone.

Stav: veľmi dobrý (použitý), Here we offer a Vötsch climate test chamber. Model designation: VC³ 4100, air-cooled With a temperature change rate of 3 K/min Test chamber dimensions: height 950 mm x width 1100 mm x depth 950 mm Overall unit dimensions: height 2000 mm x width 1300 mm x depth 1916 mm Volume: 990 liters Cable ports: Ø 125 mm, Ø 50 mm Technical data for temperature tests: Temperature range: -42°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Temperature change rate: Heating: 4.0 K/min Cooling: 3.0 K/min Max. heat compensation at +20°C: 4500 watts Technical data for climatic tests: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% r.h. Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.0 K Temporal humidity deviation: ± 1 to ± 3% r.h. Max. heat compensation: 500 W Voltage: 3/N/PE AC 400V ± 10% 50Hz Rated power: 11.5 kW Rated current: 22.0 A Refrigerant: R-404A Fjdpeziypnsfx Aqqjpi Weight: approx. 840 kg Type: VC³ 4100 Important information for your security as a buyer! The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. Upon successful inspection, chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications subject to change and error!) For further inquiries, please feel free to contact us by phone.

Stav: veľmi dobrý (použitý), Here we offer you a temperature test chamber. Water-cooled Technical Specifications: Temperature operating range: Temperature range in °C: -70 / +180°C Change rate according to DIN 50 011, Part 12: Cooling rate: approx. 5 K/min Heating rate: approx. 5 K/min Dimensions: Test volume: 350 liters Fsdpoziyphjfx Aqqopi Test chamber dimensions (H x W x D): approx. 750 mm x 650 mm x 720 mm External dimensions (H x W x D): approx. 1800 mm x 850 mm x 1640 mm Operating data: Power supply: 400 V, 3/N, 50 Hz Rated power: 13.3 kW Refrigerant: R404A / R23 Weight: approx. 650 kg Model: TS-70/350 For your safety as a buyer, please note the following information! The following procedures are carried out on all chambers we offer prior to delivery: 1. Function check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test cycle monitored by calibrated instruments. Condition: used Scope of supply: (see picture) (Specifications and technical details subject to change and errors!) For further questions, we are happy to assist you by phone.

Stav: veľmi dobrý (použitý), CTS temperature test chamber We offer you a CTS temperature test chamber. Water-cooled CTS temperature test chamber Technical specifications: Temperature operating range Temperature range: -70°C to +180°C Cooling rate: 3.0 K/min Heating rate: 3.5 K/min Temperature stability (over time): ≤± 0.3 K Dimensions: Test volume: 600 liters Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1120 mm, Depth approx. 1875 mm Operating data: Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Power rating: 8.2 kW, 14.2 A Refrigerant: R404A / R23 Weight: 600 kg Type: T-70/600 For your safety as a buyer, please note the following information: Fpodpfxoziygyo Aqqoi The following procedures are carried out in advance on our offered chambers: 1. Functional testing and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Subject to change and errors in the technical data and specifications!) We are happy to answer any further questions by phone.

Stav: veľmi dobrý (použitý), Here we offer a temperature test chamber. Water-cooled Temperature range: -45°C to +180°C External dimensions: Width 1300 mm x Height 2100 mm x Depth 2250 mm Test chamber dimensions: Width 840 mm x Height 840 mm x Depth 840 mm Refrigeration unit dimensions: Width 2300 mm x Height 2000 mm x Depth 1300 mm Average heating rate: approx. 3 K/min Average cooling rate: approx. 2 K/min Power consumption: 15 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 1000 kg Model: VTS 600/45 RS Fpedeziygmepfx Aqqsi Refrigerant: R452 Condition: used Scope of delivery: (see photo) (Specifications and technical details subject to change and errors reserved!) If you have further questions, we are happy to answer them by phone.

Stav: veľmi dobrý (použitý), Feutron Temperature Test Chamber We offer here a temperature test chamber. Feutron Temperature Test Chamber, Air-cooled Test chamber nominal volume: 280 liters Dimensions External dimensions: 1500 x 2040 x 1075 mm With fan motor and door removed: 1500 x 1940 x 925 mm Test chamber interior: 720 x 690 x 560 mm Door, clear opening: 720 x 690 mm Heated viewing window: 500 x 600 mm Temperature range: -70°C to +180°C Heating rate: 4.0 K/min Cooling rate: 0.6 K/min Fpsdpfx Aqeziyggeqji Power supply: 400 V 3/N/PE, AC, 50 Hz Maximum power consumption: 6.3 kW Weight: 600 kg Type: 3416/17 Refrigerant: R507 / R23 For your security as a buyer, the following procedures are carried out on our listed chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After a successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Stav: veľmi dobrý (použitý), CTS Climate Test Chamber T-70/600, Water-Cooled Temperature Range: -70°C to +180°C Rated Voltage: 400V 3/N PE 50 Hz Rated Power: 6.7 kW Rated Current: 10.2 A Compressors: TFH2480Z/TFH2511Z, Refrigerants R23/R404A Control System: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door - Digital display for set and actual temperature values - Easy adjustment via +/- buttons - Digital input for temperature in °C - PLC compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for external test specimen operation Insert Shelf: Stainless steel, support surface 820 x 710 mm Load per shelf max. 35 kg Total load with maximum shelves: 100 kg Refrigeration Unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system Eco-friendly refrigerants R404A/R23 Temperature Testing: Temperature range: -70°C to +180°C Temperature deviation: ±0.1 to 10.3 K over time Temperature change rate (measured at test chamber center per DIN 50 011, Part 12): - Heating: 2.5 K/min - Cooling: 2 K/min Thermal radiation max. 1500 W at +20°C Technical data based on an ambient temperature of +25°C, rated voltage 400 V, without test specimens, without radiation, and without additional equipment. Dimensions: Test volume: 600 liters Internal chamber size: 850 x 830 x 850 mm (W x D x H) External dimensions: 1050 x 1850 x 1900 mm (W x D x H) Operating Data: Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Rated power: 6.7 kW Rated current: 10.2 A Protection class: IP 22 Condensate drain: non-pressurized R 1/2" female thread Sound pressure level: < 62 dB(A) Weight: approx. 400 kg Attention buyers – your safety information: The following work is performed on our chambers before sale: 1. Function check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented trial run. Condition: used Fedpfsziycbsx Aqqspi Scope of supply: (see picture) (Specifications may change and are subject to correction!) For further questions, please contact us by phone.

Stav: veľmi dobrý (použitý), Here we offer a Weiss temperature test chamber. Weiss temperature chamber with S!MCON / 32 control, water-cooled Control panel “Touchpanel” All control and operating commands can be initiated simply by touching the functional icons on the “Touchpanel” control unit. Levelling feet To compensate for floor unevenness and to provide adequate ventilation for the machine section, the test chamber is equipped with adjustable feet. Cable ports The test chamber is fitted with cable ports on the right and left sides. These allow measuring leads and test devices to be routed into the test space. The cable ports are included as standard: R1: DN 125 mm L1: DN 50 mm (Refrigerant converted to R-452A) Test chamber volume: approx. 600 liters External dimensions with hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 1660 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Specifications for temperature testing: Temperature range: -42 to +180 °C Temporal temperature deviation at center of test space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5): Heating: 4.0 K/min Cooling: 3.0 K/min Heat compensation max. 2500 W Operating data: Fpedpfxjziyb Re Aqqei Test space lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A Rated power: 7.8 kW Site-provided fuse: 16 A slow-blow Sound pressure level: Measured at 1m distance from the front, 1m height: 58 dB(A) Refrigerant: R-452A Weight: 620 kg Model: WT3-600/40 Important safety information for buyers: The following points are performed on all chambers we offer prior to sale: 1. Function test and replacement of necessary components 2. New refrigerant fill with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful checks, a documented test run is carried out on each chamber. Condition: used Scope of supply: (see image) (Technical data, specifications, and details are subject to change and errors!) If you have further questions, we will be happy to answer them by phone.

Rok výroby: 2007, stav: pripravené na použitie (použité), Funkcionalita: plne funkčný, číslo stroja/vozidla: BX1-FR100SN.A4K-004, Na predaj je kvalitný skúšobný stroj na materiály od spoločnosti Zwick/Roell, ktorý sa skladá z: * Nosnej konštrukcie Z100 Fodpfxszkugko Aqqjpi * Typ stroja – axiálny, BX1-FR100SN.A4K-004 * Typ stroja – torzný, BXC-TD0500.A4K-002 * Snímač sily, typ séria K (100 kN) * Krútiaci momentový snímač, typ séria NM (500 Nm) * Rôzne ZPV (centrálne skúšobné predpisy) Zariadenie pochádza z laboratória a bolo používané na mechanické skúšky materiálov. Všetky zariadenia sú použité, ale v dobrom stave a funkčné.

Stav: veľmi dobrý (použitý), Weiss Type: WK11 - 600/70/5 Weiss Climatic Chamber, water-cooled The Weiss climatic chamber WK11-600/70/5, with approx. 600 liters usable volume, is suitable for temperature and humidity testing, as well as conditioning of samples and materials in a range from −70 °C to +180 °C. Simcon/32 - Net Control System Technical Data: Test chamber designation: WK11-600/70/5 External dimensions including hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions excluding hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 800 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Feedthroughs: 2x R1 nominal width 125 mm ∅ 1x L1 nominal width 50 mm ∅ Test chamber volume: approx. 600 liters Data for temperature tests: Temperature range: −70 °C to +180 °C Temporal temperature deviation at center of usable space: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2 K Temperature gradient: 1 to 4 K Rate of temperature change: Heating: 6 K/min Cooling: 6 K/min Heat compensation: at +20 °C: 5000 W at −20 °C: 5000 W Data for climate tests: Fjdpfx Aozimg Hjqqopi Temperature range: +10 to +95 °C Humidity range: 10 to 98% r.h. Temporal temperature deviation at center of usable space: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1 K Temperature gradient: 1 to 2 K Humidity fluctuation temporally at center of usable space: ±1 to ±3% r.h. Heat compensation: 500 W 3/N/PE AC 400V ±10% 50Hz Rated power: 16.5 kW Rated current: 29 A Site fuse: 32 A slow-blow Permissible Specimen Weight Total load of rack supports: 80 kg Test chamber floor: 80 kg, Insert rack: 40 kg Weight: 675 kg Refrigerant: R452A / R23 Important Note: "The table shown in the photos is not included in the sale." For your safety as a buyer, please note the following: The following points are performed on our offered chambers before delivery: 1. Functional check and replacement of necessary components 2. If necessary, refill with refrigerant in accordance with legal requirements 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See image) (Subject to change and errors in technical data, specifications are subject to confirmation!) We are happy to answer any further questions by phone.

Stav: veľmi dobrý (použitý), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Universal Testing Machine 20 kN tensile & compression tester testXpert III For sale is a high-quality Zwick / Roell universal testing machine designed for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials, and is typically used in laboratories, quality assurance, research, and education. Control is via PC with Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Testing modes: tension & compression Power supply: 230 V / 50–60 Hz / single phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical Data (according to documentation & nameplate) Mechanical / Testing Rated force: 20 kN Testing modes: tension & compression Max. test frequency: 0.5 Hz Crosshead drive: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Test space width: 440 mm Weight: approx. 150 kg (basic unit) approx. 180 kg with typical equipment Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Frequency: 50 / 60 Hz Current draw: approx. 8–10 A Power consumption: approx. 2.1 kVA Socket: Schuko (CEE 7) Measuring & Control Electronics Internal measuring rate: 500 Hz Data transfer to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery (see photo): - Zwick / Roell universal testing machine (20 kN) - Control electronics unit - PC workstation (monitor, PC - see pictures for condition) - 2 measuring modules (Delock units) Fpjdpfx Aqszimgtsqoi - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Subject to alterations and errors in technical specifications and information!) For further questions, we are happy to assist you by phone.

Stav: veľmi dobrý (použitý), CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Environmental Test Chamber CSR-60/810/S | –60 °C to +170 °C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature test system by CTS GmbH, consisting of a conditioning unit type CSR-60/810/S and an external test chamber (1200 liters). The system is ideally suited for industrial, R&D, and laboratory applications, e.g., for automotive, electronics, component, and materials testing. It enables precise temperature and climate simulation over a very wide operating range. This is a professional climate and temperature conditioning system from CTS GmbH, comprising: - Conditioning unit (CSR-60/810/S) - External test chamber (test box 1200 L) The system is designed to supply external test rooms or test boxes with precisely regulated temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, lifetime testing). Technical Data (from nameplate & manual): General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate: Fsdpozimgasfx Aqqopi Temperature range: –60 °C to +170 °C Humidity range: 10% to 80% RH Dew point range: +5 °C to +74 °C Electrical Data: Nominal voltage: 400 V / 3-phase / N / PE / 50 Hz Nominal power: 39.6 kW Rated current: 64.9 A Recommended fuse: 80 A slow-blow Connection type: Permanent connection Refrigeration System: Refrigerant: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection rating: Conditioning unit: IP54 / Test chamber: IP22 Dimensions & Weight: Conditioning Unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg Test Chamber 1200 L: Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t For your safety as a buyer, please note the following information! The following points are completed on all chambers we offer prior to delivery: 1. Functional check and replacement of necessary components 2. If required, new charge with compliant refrigerant 3. Leak test with certificate 4. After successful checks, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and data subject to change and errors!) For further questions, please do not hesitate to contact us by telephone.

Stav: použitý, Amboss + Langbein Industrial Drying Oven Amboss + Langbein WTS 20 3B – 80 °C – 400 V – 5 kW For sale is an industrial drying oven / heat drying oven manufactured by Amboss + Langbein, model WTS 20 3B. This unit is ideally suited for drying, heating, and tempering workpieces, components, or materials in workshop, industrial, or laboratory environments. The drying oven features digital temperature control, a safety thermostat, and a robust industrial-grade construction with multiple stainless steel shelves. Thanks to its castors, the unit is easily movable within the facility. Technical specifications: Manufacturer: Amboss + Langbein Model: WTS 20 3B Year of manufacture: 04/2010 Operating voltage: 400 V Frequency: 50 Hz Power: 5 kW Max. temperature: approx. 80 °C Temperature control: digital Safety thermostat included CE marking Dimensions / Weight (approx.): Height: 170–180 cm Width: 80–90 cm Depth: 70–80 cm Fpedozimf Nopfx Aqqei Weight: 180–220 kg Condition: used Scope of delivery: (see photo) (Specifications and details subject to change and error!) For further questions, we will be happy to assist you by phone.

Stav: použitý, IMV Typ: i240 + zosilňovač SA3M + ventilátor Rozmery: Výkonový zosilňovač: SA3M-i40EM-CE ŠxVxH 580 x 1950 x 850 mm Vibračný generátor: i240 ŠxVxH 1234 x 997 x 720 mm Technické údaje zariadenia: Hmotnosť kotvy: 20 kg Priemer kotvy: 290 mm Rezonančná frekvencia kotvy: 2300 Hz Maximálny prípustný excentrický moment: 850 N·m Frekvenčný rozsah: 0–2600 Hz. Maximálna sila: 24 kN (sinus a náhodný signál) 48 kN (náraz) Maximálne zrýchlenie: 1200 m/s² (sinus) 840 m/s² (náhodný signál) 2400 m/s² (náraz) Maximálna výchylka: 100 mm špička-špička. Maximálna nosnosť: 400 kg. Fpjdpfezimf Asx Aqqji Podmienky prostredia: Teplota 0–40 °C, vlhkosť vzduchu 0–85 % relatívnej vlhkosti. Maximálny výstupný výkon: 30 kVA (SA3M-i40EM-CE) + Vibračná kotva 290 mm Použiteľné do 2000 Hz Hmotnosť: 410 kg (SA3M-i40EM-CE) Celková hmotnosť približne 2800 kg Stav: použitý Rozsah dodávky: (Pozri obrázok) (Zmeny a chyby v technických údajoch a informáciách sú vyhradené!) Ďalšie otázky vám radi zodpovieme telefonicky.

Stav: veľmi dobrý (použitý), Vötsch Type: VC³ 4018/S Vötsch VC³ 4018/S Climate Test Chamber Li-Ion CO/CO₂ −42 to +150 °C 400 V Air-cooled For sale is a temperature and climate test chamber from the renowned German manufacturer Vötsch Industrietechnik GmbH, model VC³ 4018/S, year of manufacture 2012. This device is specifically equipped for testing lithium-ion batteries and features CO monitoring as well as CO₂ inertization to increase operational safety. Important Note: Due to this safety equipment, the test chamber's temperature range is software-limited to −42 °C to +150 °C. The chamber is ideally suited for: - Li-ion battery tests - Electronics and assembly testing - Temperature and climatic stress tests - Development and quality assurance tasks Technical data: Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Enclosure dimensions: Width 870 mm x Depth 1550 mm x Height 1800 mm Test chamber volume: 190 liters Access ports installed as standard R1: Ø 125 mm L1: Ø 50 mm Temperature testing data: Temperature range: -42°C to +150°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature homogeneity: ± 0.5 to ± 1.5 K Temperature change rate: Heating 4 K/min Cooling 4 K/min Max. heat compensation: 2300 W Climate testing data: Temperature range: +10 to +95 °C Dew point range: -3 to +94 °C Humidity range: 10 to 98 % RH Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature homogeneity: ± 0.5 K Temporal humidity deviation: ± 1 to ± 3 % RH Heat compensation: 400 W Operational data: Test chamber lighting: Halogen bulb 2 x 24V, 50W 3/N/PE AC 400V±10% 50 Hz Nominal power: 4.1 kW Nominal current: 14 A Refrigerant: R-404A Weight: 470 kg For your safety as a buyer, please note the following information! The following procedures are carried out on our chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant if required 3. Leak test with certificate 4. After passing the check, the chambers undergo a documented test run. Condition: used Fedszimfvspfx Aqqopi Scope of delivery: (see photo) (Subject to changes and errors in technical data and information!) If you have further questions, we will be happy to answer them by phone.

Stav: veľmi dobrý (použitý), Espec Type: PL-2KPH ESPEC PL-2 KPH Climate Chambers Air Cooled Temperature range: -40°C to +180°C Humidity range: approx. 10 to 98% RH Dependency on temperature range and humidity fluctuations: ± 2.5% RH, temporarily ± 3.0% RH Internal dimensions: Width 500 × Height 750 × Depth 600 mm External dimensions: Width 910 × Height 1590 × Depth 973 mm Microprocessor control with 10 internationally predefined test standards and 20 freely programmable memory slots, as well as an integrated timer with program start/stop automation and error code display. Programming via touch screen. Acoustic and visual alarm indication. Device protection in case of overtemperature: Overtemperature protection: 2 switching contacts Test area lighting Operating hours counter Test chamber volume: 225 l Net weight: 300 kg Electrical connection: 400 V 3/N 50 Hz, Plug: CEE 16 A Max. current consumption: 11.0 A Refrigerant: R404A Scope of delivery: Espec climate test chamber Fpjdpfx Aezimfpjqqei For your security as a buyer, please note the following information! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful verification, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors!) If you have any further questions, we will be happy to assist you by phone.

Stav: použitý, SincoTec Type: POWER FLOW BIAXIAL 125/150 kN ±4000 Nm SincoTec POWER FLOW BIAXIAL 125/150 kN – ±4000 Nm Servo-hydraulic Test Bench Description: For sale is a servo-hydraulic biaxial test bench SincoTec POWER FLOW BIAXIAL. The system comes from industrial use and was fully functional until decommissioning. Service and maintenance have been carried out professionally. Comprehensive technical documentation (operating manual, assembly, and wiring diagrams) is included. The test bench is suitable for tensile/compression tests, torsion tests, and combined load tests on components and assemblies, e.g., for fatigue strength, service life, and functional tests. Main technical data Test bench: Maximum test force (design capacity): up to ±150 kN Typical operating configuration: 125 kN Max. torque (torsion): ± 4,000 Nm Max. stroke linear actuator: ± 75 mm Max. rotation angle: ± 50° Measurement accuracy: Class 1 (DIN EN 10002-3) Test bench dimensions: Total height: approx. 3,430 mm Width: approx. 1,480 mm Depth: approx. 1,180 mm Max. fixture weight: 250 kg Hydraulic power unit (included) Drive power: approx. 152 kW Flow rate: approx. 260 l/min Operating pressure: up to 280 bar Hydraulic oil: HLP ISO VG 46 Tank capacity: approx. 1,500 liters Power unit dimensions: Length: approx. 2,714 mm Width: approx. 1,820 mm Height: approx. 2,085 mm Electrical data: Control cabinet/Test bench 400 V / 50 Hz Fjdpfxjzimcbe Aqqepi Connection: CEE 5-pin Fuse protection: 16 A Hydraulic power unit 400 V / 50 Hz three-phase current Hardwired connection Fuse protection: approx. 160 A Scope of delivery Servo-hydraulic test bench SincoTec POWER FLOW BIAXIAL Hydraulic power unit Control cabinet with industrial PC Measurement and control technology Technical documentation The machine is designed up to 150 kN. The specification of 125 kN refers to typical operating configuration. Test bench weight: approx. 4.7 t Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and information!) For further questions, please feel free to contact us by phone.

Stav: použitý, SincoTec Type: POWER FLOW 100kN / 2000Nm Sincotec Power Flow 100 kN / 2000 Nm – Servo-hydraulic Test Stand – Fully Functional Description: For sale is a Sincotec Power Flow servo-hydraulic test stand from an industrial operation. This unit is ideally suited for dynamic and static testing of components and assemblies, e.g., for automotive, mechanical engineering, or research applications. Technical highlights: - Max. test force: 100 kN (up to ±150 kN) - Max. torque: ±2000 Nm (up to ±4000 Nm) - Linear stroke: ±50 mm (max. ±75 mm) - Max. rotation angle: ±50° - Servo-hydraulic control - Controlled via Sincotec TestPilot / CoPilot software - Includes large hydraulic power unit Dimensions & Test Stand: - Test table: approx. 1.20 × 1.00 × 1.20 m (H) - Total height test stand: approx. 3.30 m Hydraulic Power Unit (separate): - Height: 2085 mm - Length: 2714 mm - Width: 1820 mm Fpsdpfx Aozimb Dsqqji Fully functional prior to dismantling Power supply / Electrical (from nameplate): - Individual units / motors - 230 V / 50 Hz - Leakage oil pump: 0.18 kW / 1.5 A - 400 V / 50 Hz (three-phase) - Traverse: 0.25 kW / 0.79 A - Total weight: approx. 3000 kg Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (see photos) (Specifications and details subject to change and errors excepted!) For any further questions, feel free to contact us by phone.

Stav: veľmi dobrý (použitý), Vötsch Model: VT³ 7006 S2-M Water-cooled Technical data: Maximum specimen weight: 20 kg Test chamber volume: 60 liters Test chamber dimensions: Width 380 mm, Depth 430 mm, Height 370 mm External dimensions: Width 875 mm, Depth 1970 mm, Height 1895 mm Fpedpfx Aozima Hoqqsi Vertical arrangement of hot and cold chambers (chamber switching via lift carriage) Temperature range of hot chamber: +50 °C to +220 °C (calibration value +125 °C) Temperature range of cold chamber: -80 °C to +70 °C (calibration value -40 °C) Uniform temperature distribution in the test chamber (±0.5 K to ±2.0 K) Temperature deviation over time: ±0.3 K to ±1.0 K 80 mm duct for specimen measurement/supply SIMCONTROL software for operation and status display Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 8.5 kW Rated current: 25 A Refrigerants: R-404A, R-23 Weight: approx. 800 kg For your safety as a buyer, please note the following information: The following procedures are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run Condition: used Scope of delivery: (see picture) (Specifications and technical details are subject to change without notice!) Should you have further questions, we will be happy to assist you by phone.

Stav: veľmi dobrý (použitý), Thermo Scientific Vötsch Typ: UT 6420 Na predaj je profesionálna laboratórna a priemyselná sušiaca/teplovzdušná pec Thermo Scientific / Vötsch Industrietechnik – typ UT 6420. Zariadenie je vhodné na sušenie, ohrievanie, temperovanie a tepelné spracovanie materiálov a súčiastok pri presne riadených teplotách až do 300 °C. Typické oblasti použitia: laboratórium, priemysel, dielňa, výskum, testovanie elektroniky a materiálov. Vnútorný priestor je vyrobený z nehrdzavejúcej ocele, čo zabezpečuje rovnomerné rozloženie tepla a je navrhnutý na nepretržitú prevádzku. Vnútorný priestor: nehrdzavejúca oceľ s výsuvnými roštami Vonkajšie rozmery cca: 170 × 70 × 80 cm (V × Š × H) Technické údaje: Výrobca: Thermo Scientific / Vötsch Industrietechnik Typ: UT 6420 Fpedpfx Ajzimatsqqei Max. teplota: 300 °C Regulácia teploty: elektronická (Heraeus Kelvitron) Menovité napätie: 3/N/PE 400 V, 50/60 Hz Menovitý prúd: 6,6 A Príkon: cca 4,2 kW Krytie: IP20 Hmotnosť cca: 200–230 kg Stav: použitý Dodávané príslušenstvo: (viď obrázok) (Zmeny a chyby v technických údajoch vyhradené!) Ďalšie otázky Vám radi zodpovieme telefonicky.

Stav: veľmi dobrý (použitý), Dr. Hönle UV-Technologie – Bluepoint LED High-Power + Bluepoint 2 easycure – Complete System incl. LED Spots & Manuals For sale is a complete UV curing system from Dr. Hönle, consisting of two control units and several LED spots. Ideal for professional applications in electronics manufacturing, medical technology, optics, plastics processing, and laboratory operations. Description: The system includes: - Bluepoint LED High-Power control unit (REF 45250.c) - Bluepoint 2 easycure control unit (REF 33900.a) - Several UV LED spots (e.g., 365 nm, air-cooled) - Adapter BP-LED 4-1 (REF 45970.a) – for controlling up to 4 spots - Original operating manuals + CD The devices offer precise control of irradiation time, intensity, and energy – perfect for reproducible UV curing processes in industrial environments. Technical data: Bluepoint LED High-Power (45250.c): - Power supply: 36 V / 5.5 A - Control for up to 4 LED spots - Adjustable UV intensity - Time programs and energy measurement Bluepoint 2 easycure (33900.a): - 230 V AC, 50 Hz - 570 VA power consumption - High-performance LED control - Industrial quality, Made in Germany Dimensions / total weight: approx. 12–15 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) - Bluepoint LED High-Power - Bluepoint 2 easycure - LED spots (air-cooled) Fpedpfx Ajzimameqqei - Adapter BP-LED 4-1 - Operating manuals - CD - Original documentation (Subject to changes and errors in the technical data and specifications!) For further questions, please feel free to contact us by phone.

Stav: použitý, Instrument Systems LED Measurement Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! For sale is a complete professional LED measurement laboratory from Instrument Systems (Konica-Minolta Group). The system is suitable for the precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices come from a laboratory environment, years of manufacture 2007–2008, high-quality industrial measurement technology. Scope / Included Components • CAS 140C-152 Spectrometer (2008) • Integrating Sphere ISP250-110 + ISP250-211 (2008) • LEDGON 100 Goniophotometer (2007) • CSD315 3-Axis Controller + Emergency Stop Control Unit (2007) • Keithley 2611 SMU / SourceMeter • PC system incl. software: - SpecWin Pro - SpecWin Light - Goniometer module - Original license CDs • User manual "LED Test Sockets" • Cables & accessories as shown in photos Technical Capabilities • Measurement of total luminous flux (lumens) • Spectral analysis (color temperature, CRI, xy, spectrum) • Goniophotometric angle measurement • Analysis of emission characteristics • Electrical control and IV measurements with Keithley 2611 • Fully automated measurement sequences with SpecWin Pro CAS140C: approx. 36×15×30 cm / 7–9 kg Integrating Sphere: approx. 40×40×45 cm / 6–8 kg LEDGON 100: approx. 80×30×28 cm / 12–15 kg Fpsdpfjzimaaox Aqqji CSD315: approx. 42×12×35 cm / 5 kg Keithley SMU: approx. 36×9×28 cm / 5 kg Total dimensions/weight: approx. 40–45 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See pictures) (Specifications are subject to change and errors reserved!) If you have further questions, please feel free to contact us by phone.