Skúšanie materiálov kúpiť použité (469)

Stav: veľmi dobrý (použitý), CTS Type: C-40/350 Ex/l Climatic Test Chamber, Water-cooled ATEX Zone 1 The 'Ex/l' designation indicates that this climatic test chamber is suitable for use in hazardous areas classified as Zone 1. This means it is intended for environments where explosive atmospheres may occur. Such equipment is specially designed and tested to ensure safety in these conditions. Temperature Testing: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K (over time) Temperature change rate according to IEC 60068-3-5: Heating: 3.5 K/min Cooling: 4 K/min Heat compensation: approx. 3500 W at +20°C approx. 2000 W at -20°C Chsdpewvr H Uofx Afwsf Climate Testing: Temperature range: +10°C to +90°C Humidity range: 10% to 95% relative humidity Dew point range: +5°C to +78°C Temperature deviation: ≤ 1.0 K (over time) Humidity deviation: ≤ +3.0% rH (over time) All technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data. Technical Specification: Refrigeration unit: water-cooled, low noise, fully hermetic, infinitely variable capacity adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber floor load capacity: 150 kg/m² Wire shelf: stainless steel, usable area 620 x 600 mm, max. load per shelf 35 kg, total load with max. number of shelves 100 kg Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numeric input for setpoints Plain text fault messages RS 232 interface Ethernet interface Free control channels for customer-specific test specimen control Dimensions: Test volume: 350 liters Internal dimensions: height 750 mm × width 650 mm × depth 720 mm External dimensions: height 1800 mm × width 850 mm × depth 1640 mm Operating Data: Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Rated power: 7.15 kW Rated current: 14.3 A Protection class: IP54 Sound pressure level:

Stav: dobrý (použitý), Type: VCS 7034-5 Climate test chamber, water-cooled Vötsch VCS 7034-5 Test chamber volume: 335 liters Performance for temperature tests: Temperature range: -70 to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Change rate: Chsdpfxjxgd Rdj Afwof Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration values: +23°C and +80°C Performance for climate tests: Temperature range: +10 to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration values: +23°C / 50% r.h. and +95°C / 50% r.h. Test chamber dimensions (W x D x H): 580 mm x 765 mm x 750 mm External dimensions (W x D x H): 870 mm x 1595 mm x 1775 mm Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Nominal power: 10 kW Nominal current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R-404A / R-23 Important information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Following successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Technical specifications are subject to change and errors excepted!) For further questions, we will be happy to answer your call.

Stav: veľmi dobrý (použitý), Lindner Burst Test Bench Here we offer a Lindner burst test bench. AGB Burst Test Bench TMM4 Technical Data: AGB Burst Test Bench TMM4 Year of manufacture: 2015 Rated voltage: 3/N/PE AC 400V Rated power: 5.5 kW Chamber temperature range: RT ... 180°C Medium temperature range: RT ... 135°C Pressure range: 0 ... 5 bar Cedpfx Aslx A T Dsfwjhf Compressed air supply: 6-8 bar Test medium: glycol/water Heat transfer oil: Fragoltherm Q-HTF Dimensions: length 2150 mm x width 1050 mm x height 2160 mm Operating voltage: 3/N/PE AC 400V +/-10% 50Hz Power: 5.5 kW Rated current: 8A Main fuse: 16A Control voltage: 24VDC PLC system: S7-1215 DC/DC/RLY The following items are required for commissioning the burst test bench: Pump, cooling tower & fire alarm control panel (not included in delivery). Type: AGB Burst Test Bench TMM4 Weight: approx. 705 kg Condition: used Scope of delivery: (see picture) Subject to technical changes and errors in data! Further questions are gladly answered by phone.

Stav: veľmi dobrý (použitý), Feutron Model: 3702/06 Water-Cooled Climate Test Chamber Technical Data: Test Chamber Nominal Volume: 2.0 m³ Dimensions: Outer test chamber with humidifier console Width: 2970 mm Height: 2370 mm Depth: 1530 mm Back panel Minimum installation dimensions: Width: 2970 mm Height: 2390 mm Depth: 1550 mm Test chamber interior: Width: 2000 mm Height: 1000 mm Depth: 1000 mm Door: double-leaf, clear opening width: 2000 mm, height: 1000 mm Viewing windows, heated: 2 pcs, width: 500 mm, height: 600 mm Cable port: 1 pc, left side panel, diameter 75 mm Temperature range: -40...100°C Climate range: 10...95°C Temperature deviation, over time ≤ ± 0.5...± 1.0 K Change rates measured in supply air without load: Cedpfxek E Hnqs Afwjhf Cooling: up to 2.0 K/min on average Heating: up to 2.0 K/min on average Humidity range: 10...95% rH Humidity deviation, over time ≤ ± 3.0% rH Dew point range, temporary: -5...95°C Refrigeration system: water-cooled, semi-hermetic Bitzer unit Refrigerant: R507 (Μ-Κ1) Climate and dryer refrigeration unit: air-cooled/hermetic Refrigerant: R134a (Μ.ΚΚ) Power supply: Electrical connection: 400V 3/N/PE.AC, 50Hz Mains plug: CEE 5-pin, 32 A, with 5.0 m cable Maximum simultaneous power consumption: 10.0 kW Supply line protection: 3x 25A, type C Protection class: IP20 Weight: 1300 kg Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data and information!) For further questions, feel free to contact us by phone.

Stav: veľmi dobrý (použitý), Here we offer a temperature test chamber. Water-cooled Temperature range: -45°C to +180°C Csdpjmn Rciofx Afwjhf External dimensions: Width 1300 mm x Height 2100 mm x Depth 2250 mm Test chamber dimensions: Width 840 mm x Height 840 mm x Depth 840 mm Refrigeration unit dimensions: Width 2300 mm x Height 2000 mm x Depth 1300 mm Average heating rate: approx. 3 K/min Average cooling rate: approx. 2 K/min Power consumption: 15 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 1000 kg Model: VTS 600/45 RS Refrigerant: R452 Condition: used Scope of delivery: (see photo) (Specifications and technical details subject to change and errors reserved!) If you have further questions, we are happy to answer them by phone.

Stav: veľmi dobrý (použitý), Vötsch Type: VTS³ 7027-25 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Technical Data: With a temperature change rate of 25 K/min Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 615 mm External dimensions: Height 1775 mm, Width 780 mm, Depth 1895 mm Temperature range: -72°C to +180°C Temperature deviation over time: ±0.1 to ±0.5 Temperature uniformity spatially: ±0.5 to ±2.0 Temperature change rate (cooling): 25 K/min Temperature change rate (heating): 25 K/min Heat compensation at -20°C: 8000 W Heat compensation at +20°C: 8000 W Test chamber volume: 270 liters 2x side feed-throughs ∅ 125 mm Chsdjtz Rqmepfx Afwjf 1x side feed-through ∅ 50 mm Chamber is water-cooled Test chamber lighting: LED strip 24 V, 6.8 W / 2x halogen bulb 24 V, 50 W Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 26 KW Rated current: 44 A Refrigerants: R-452A and R-23 Weight: approx. 980 kg For your peace of mind as a buyer, the following information applies: The following points are carried out on our offered chambers in advance: 1. Functional inspection and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) If you have additional questions, we are happy to answer them by phone.

Stav: veľmi dobrý (použitý), Vötsch Model: VC³ 0100 Vötsch Climate Test Chamber, Air-Cooled Test Chamber Dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Unit Dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Chamber Volume: 990 liters Temperature Testing: Minimum Temperature: -0°C Maximum Temperature: +90°C Temperature Change Rate Cooling: 0.2 K/min Temperature Change Rate Heating: 0.5 K/min Temporal Temperature Deviation: ±0.1 to ±0.5 K Spatial Temperature Uniformity: ±0.5 to ±1.0 K Heat Compensation at +20°C: 350 W Climatic Testing: Minimum Temperature: +10°C Maximum Temperature: +90°C Dew Point Temperature Range: +4°C to +89.5°C Humidity Range: 10 to 98% RH Temporal Humidity Deviation: ±1 to ±3% RH Temporal Temperature Deviation: ±0.1 to ±0.3 K Spatial Temperature Uniformity: ±0.5 to ±1.0 K Voltage: 1/N/PE AC 230V ±10% 50Hz Nominal Power: 2.3 kW Nominal Current: 10 A Refrigerant: R-404A Chjdpfx Aetz T D Asfwof Weight: approx. 1400 kg Important Information for Buyers: For your assurance, the following measures are taken on all our chambers prior to sale: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors reserved!) For further questions, feel free to contact us by telephone.

Stav: použitý, Gläser Type: ACM 18 Machine control: SIEMENS PLC S7-1200 Safety control: SICK Flexi Soft 1 media circuit (hydrocarbon) Supply pump: variable gear pump (24 V) Vacuum pump: diaphragm pump (230 V / 50 Hz) 1 lift-/swiveling membrane holder with 3 removable cascade rings for filter membranes with ø 47 mm. System filter: 0.2 µm; length: 5 inches Csdpfx Afowaypfjwshf Return filter: 5.0 µm; length: 5 inches System pressure: max. 6 bar Maximum flow rate: 2.0 l/min Minimum flow rate: 0.250 l/min Maximum system temperature: 41 °C Tank volume: approx. 12.8 liters Filling option for tank via manual 3-way ball valve Recirculation and reuse of flush medium Permissible ambient temperature: +15…+25°C Noise emission below 70 dB (A) Flow-Cap upper part with 1 particle filter (separation efficiency: 99.995%; filter class: H14 HEPA filter according to EN 1822) Operator protection against splashing analysis fluid via safety shield Drip tray under the membrane holder Operation via 12" BASIC touch panel (optional COMFORT panel) Operation via glass touch keyboard and stylus when option 12" COMFORT touch panel is selected 32 different test programs each with up to 30 flushing steps Functions: spraying, rinsing, ultrasonic Bath 750 x 600 x 500 (W x D x H) mm with a usable volume of approx. 5 l for ultrasonic application (with 300 mm diameter hemisphere) Folding personnel safety screen with 3 movable panels for hand access (operator protection against splashing analysis fluid) Quick coupling in the basin area for connecting various nozzles. The delivery includes one nozzle with Ø 2.5 mm Component insertion opening: approx. 1100 x 2200mm (W x H) Basket for ultrasonic applications for components up to a maximum of 3 kg Parts carrier grid for components up to 15 kg Extraction methods: spraying, rinsing, internal rinsing (optional), ultrasonic Medium: cold cleaner A III Analysis membrane Ø 47 mm (up to 3 units) Blank value: < 150 µm (from at least SaS 2 or SaS 3) Electrical connection (machine): 230 VAC ±10%, 50/60 Hz Rated power: 500 W Rated current: 2 A Pre-fuse: max. 16 A Power supply: at least 3 x 1.5 mm² Control voltage: 24 VDC Dimensions (external): H x W x D: 1922 x 800 x 893 mm Weight: 324 kg Condition: used Scope of delivery: (see image) (Specifications and technical data are subject to change and error!) For further questions, we will be happy to assist you by phone.

Stav: veľmi dobrý (použitý), Vötsch Model: VC 7018 Vötsch Climate Test Chamber VC 7018, water-cooled Control Unit: “Touchpanel” All control and operating commands can be issued by simply touching the function symbols on the control unit “Touchpanel”. Leveling Feet To compensate for uneven floors and to ensure sufficient ventilation of the machine section, the test chamber is equipped with adjustable feet. Feed-throughs The test chamber is equipped with feed-throughs on the right and left sides, allowing measurement leads and test devices to be routed into the test space. Standard configuration feed-throughs: R1: nominal width 125 mm L1: nominal width 50 mm Test Chamber Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External Dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Technical data for temperature testing: Temperature range: -70°C to +180°C time stability: ±0.1 to ±0.5 K spatial stability: ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Technical data for climate testing: Temperature range: -10°C to +95°C Humidity range: 10% to 98% RH temperature deviation (temporal, center of usable space): ±0.1 to ±0.3 K temperature deviation (spatial): ±0.5 to ±1.0 K temperature gradient: 1 to 2 K humidity deviation (temporal, center of usable space): ±1 to ±3 % RH Electrical connection: Rated voltage: 3/N/PE AC 400V ±10%, 50Hz Rated power: 5.9 kW Rated current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, on-site Refrigerants: R-404A and R-23 Test chamber volume: approx. 190 liters Weight: approx. 460 kg net Buyer Information – For Your Safety! The following points are carried out in advance on all chambers offered by us: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) Codpjwgaykefx Afwjhf (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Stav: veľmi dobrý (použitý), Weiss Model: WKL 34/40 Weiss Climate Chamber, Air-Cooled Temperature range: -40°C to +150°C Chamber volume: 34 liters Feedthroughs installed as standard: R1 NW 50 mm L1 NW 120 mm Internal dimensions: Height 310 mm x Width 324 mm x Depth 300 mm External dimensions: Height 1740 mm x Width 630 mm x Depth 970 mm Performance data for temperature tests: Temperature range: -40°C to +150°C Temperature variation at steady-state (according to IEC 60068-3-5): Temporal temperature fluctuation (center of working space): ±0.3 to ±1 K / ±1 to ±2 K Spatial temperature deviation (temperature gradient): 2 to 4 Temperature change rate (IEC 60068-3-5): Heating: 2.5 K/min Cooling: 3.5 K/min Maximum heat compensation: 800 W Performance data for climate tests: Temperature range: +10°C to +95°C Humidity range: 10 to 98 % r.H. Temperature and humidity variation (at steady-state, per IEC 60068-3-5): Temporal temperature fluctuation (center of working space): ±0.3 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 (temperature gradient): 1 to 3 Temporal humidity fluctuation (center of working space): ±3 to ±5 % r.H. Operating data: Test chamber lighting: Halogen bulb 12V, 20W Cjdjxvpp Repfx Afwohf Rated voltage: 1/N / PE AC 230 V ± 10 %, 50 Hz Rated power: 1.8 kW Rated current: 8.0 A Fuse (customer side): 16A slow-blow Heat emission, air-cooled chambers: Maximum heat emission to surroundings: 800 W Refrigerant: R-404A Weight: 110 kg Important information: "The table shown in the photos is not included in the sale." For your security as a buyer, please note the following: The following points are carried out on all chambers we offer in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Subject to change and error in technical data and specifications!) For further questions, feel free to contact us by phone.

Stav: použitý, Type: TSD-100 100 litres of usable test chamber volume for larger test specimens up to 30 kg. Complies with all common international standards. Water-cooled Temperature range (hot chamber): +60 °C to +200 °C Temperature range (cold chamber): -70 °C to 0 °C Test chamber dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Programmable control via touch panel Automatic defrost Overtemperature protection Operating hours counter Mobile design 2 stainless steel specimen baskets Cable port Ø 100 mm Refrigerants: 3 kg R404A, 1 kg R23 Cedoxugq Aspfx Afwjhf Power supply: 400V 3Ph 50Hz Max. power consumption: 32A Condition: used Weight: 1100 kg Your safety as a buyer—please note the following information! The following procedures are performed on all chambers we offer, in advance: 1. Functional check and replacement of necessary components 2. New legally compliant refrigerant filling if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Stav: veľmi dobrý (použitý), RS Simulators Type: ST2K320/45 Shock Test System, Water-cooled Operating Climate Range Temperatures in the Upper Test Chamber: Temperature range: +40 °C to +180 °C Temperatures in the Lower Test Chamber: Temperature range: -40 °C to +100 °C Additional Temperature: +12 °C to +30 °C Humidity: 25% to 75% relative humidity Dimensions: Width 1100 mm, Height 2300 mm, Depth 2300 mm Test Chamber Dimensions: Width 470 mm, Depth 700 mm, Height 440 mm Electrical Power Supply: Cedpfx Afetqcu Eswehf Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A / 2.5 kg Chamber Weight: approx. 850 kg For your safety as a buyer, please note the following information: The following procedures are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. If needed, refill with legally compliant refrigerant 3. Leak tightness test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Technical data, specifications, and details subject to change and errors excepted!) Should you have further questions, feel free to contact us by phone.

Stav: veľmi dobrý (použitý), We are offering a Weiss temperature chamber for sale. Weiss Temperature Chamber with S!MCON / 32 Control, Air-Cooled (Refrigerant converted to R-452A) Test Chamber Volume: approx. 335 liters Internal Dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External Dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Chjdpfjq U Sdnjx Afwof Operating Data: Test chamber lighting: Halogen bulb 24V, 50W Nominal voltage: 3/N / PE AC 400 V ±10%, 50 Hz Nominal current: 12.5 A Nominal power: 4.1 kW External circuit fuse: 16 A slow-blow Sound pressure level: approx. 58 dB(A) (measured 1m in front, 1m height) Temperature Test Data: Temperature range: -72 to +180 °C Temporal temperature deviation at working space center: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Temperature gradient (according to IEC 60068-3-5): 1 to 4 K Temperature change rate (according to IEC 60068-3-5): Heating: 3.0 K/min Cooling: 3.0 K/min Maximum heat compensation: 1500 W Refrigerant: R-452A / R-23 Weight: 585 kg Type: WT3-340/70 Important note for your safety as a buyer! The following procedures are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Changes and errors in the technical data and specifications reserved!) Should you have further questions, we are happy to assist you by phone.

Stav: veľmi dobrý (použitý), Binder Typ: Binder CB 210 CO² / 9140-0013 Technické údaje Teplotný rozsah: 7 °C nad teplotou okolia až do 60 °C MB1 ovládač na riadenie teploty a koncentrácie CO2 Objem vnútra: 210 litrov Cedpfx Aerp Enbjfwehf Vonkajšie rozmery (Š x V x H): 740 x 1069 x 715 mm Vnútorné rozmery (Š x V x H): 560 x 750 x 500 mm Hmotnosť: cca 121 kg Stav: použitý Súčasť dodávky: (viď obrázok) (Zmeny a chyby v technických údajoch vyhradené!) Ďalšie otázky radi zodpovieme telefonicky.

Stav: dobrý (použitý), Weiss Type: WK1-1000/70 Weiss Climate Test Chamber, Water-Cooled (Refrigerant converted to R-452A) Control panel: "Touch panel" All control and operation commands can be executed by simply touching the function icons on the "Touch panel" control panel. Chedpfx Ajrvx Ezofwef Feedthroughs The test chamber is equipped with feedthroughs on both the right and left sides, allowing measuring lines and test devices to be routed into the test chamber. Feedthroughs: 1 feedthrough Ø 125 mm, installed on the right 1 feedthrough Ø 50 mm, installed on the left Volume: 990 liters Test chamber dimensions: Test chamber: width 1100 mm, depth 950 mm, height 950 mm Housing: width 1385 mm, depth 1850 mm, height 1980 mm Temperature test specifications: Minimum temperature: –70 °C Maximum temperature: +180 °C Temperature deviation, over time: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 2 K Temperature change rate, heating: 4 K/min Temperature change rate, cooling: 2.5 K/min Max. Heat compensation: 2750 W Climatic test specifications: Temperature range: +10°C to +95°C Humidity range: 10 to 98% rH Temperature deviation, over time: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1 K Humidity deviation, over time: ± 1 to ± 3% rH Operating data: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 29A Rated power: 19.8 kW Refrigerant: R-452A / R23 Weight: approx. 910 kg For your safety as the buyer, the following information: The following steps are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) For further questions, we will be happy to assist you by phone.

Stav: dobrý (použitý), CTS Model: TSR-30/1000 Water-cooled The type designation of the CTS cabinet series is composed as follows: For example, Type TSR-30/1000 1) T stands for: Temperature 2) S stands for: Stress Screening 3) R stands for: External Conditioning 4) -30 signifies: minimum temperature -30°C 5) 1000 signifies: 1000 liters test chamber volume Technical performance data: A) TSR-30/1000 base unit without hose connections, i.e., when used as a standalone temperature test chamber Temperature tests: Temperature range: -40°C to +180°C Final temperature: -45°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating: 6.0 K/min Cooling: 5.0 K/min Heat emission: approx. 5000 W at +20°C approx. 4200 W at ±0°C approx. 3000 W at -20°C Technical data based on ambient temperature +25°C, Nominal voltage 400V, without test specimen, no irradiation, and without additional equipment. Airflow volume: approx. 2000 m³/h B) TSR-30/1000 base unit with hose connections, for connection to a customer-supplied external test chamber Temperature tests: Temperature range: -30°C to +170°C Temperature deviation: ≤ ±0.1 to 0.5 K over time Average temperature change rate, measured in closed-loop circuit Heating: 4.0 K/min Cooling: 4.0 K/min within the range of +150°C to -10°C Technical data based on ambient temperature +25°C, Nominal voltage 400V, without test specimen, no irradiation, without additional equipment, measured in closed-loop circuit Note: The customer-supplied external test chamber must be completely sealed and properly insulated; any feedthroughs must be optimally sealed by the customer. Dimensions: Test volume: 1,000 liters Air recirculation port: Ø 200 mm Test chamber dimensions: Height 900 mm, Width 1,000 mm, Depth 1,100 mm External dimensions: Height 1,950 mm, Width 1,270 mm, Depth 2,245 mm Technical design: Refrigeration unit: Water-cooled, low-noise, fully hermetic Infinitely variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Door: Fully opening door, left hinged, One-hand operation, lockable. Insert shelf: Stainless steel, support surface 970 x 980 mm Load per shelf max. 35 kg Csdpferivfcox Afwshf Maximum total load with full shelf configuration: 100 kg Test chamber illumination: Halogen lamp 20 W, 12 V Control: - 32-bit controller - LCD control panel Operating data: Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Rated power: 13.3 kW Protection rating: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 850 kg For your safety as a buyer, please note the following information! The following procedures are carried out in advance on the chambers we offer: 1. Functional test and replacement of necessary components 2. New fill with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Technical data subject to alterations and errors. Specifications are non-binding!) If you have further questions, we will be happy to answer them by phone.

Stav: dobrý (použitý), Heraeus Vötsch Model: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, water-cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm x Depth 765 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1595 mm x Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Chodjun Rv Nopfx Afwef Rated power: 10 kW, Rated current: 21 A Sound pressure level at 1m distance (free-field measurement): < 69dB (A) Side port: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerants: R-404A and R-23 Weight: approx. 570 kg For your safety as a buyer, please note the following information: The following steps are carried out in advance on all test chambers we offer: 1. Functional check and replacement of necessary components 2. New filling with refrigerant compliant with legal regulations 3. After successful inspection, the chambers undergo a test run, monitored with calibrated equipment. Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Stav: veľmi dobrý (použitý), Here we offer you a TPS Blue-M temperature convection oven. Chjdpfxjdv Rabo Afwsf TPS Blue-M Temperature Convection Oven Blau M 7780 Specifications Temperature range: 15°C above ambient temperature up to 704°C Internal dimensions (W x D x H): 25cm x 20cm x 20cm External dimensions (W x D x H): 51cm x 38cm x 72cm Cladding dimensions (W x D x H): 68cm x 48cm x 77cm Electrical rating: 380V 3 phase 50 Hz The CW-7780 has 8 shelf positions on 2" centers Fume hood, stainless steel design, without extractor/fan Model: CW-7780-JY-MP550 Condition: used Scope of delivery: (see picture) (Specifications and details are subject to change and may contain errors!) For further questions, we are happy to assist you by phone.

Stav: veľmi dobrý (použitý), CTS testovacia klimatická komora Ponúkame CTS klimatickú komoru. Chladenie: vzduchom Objem testovacieho priestoru: 200 litrov Vnútorné rozmery testovacieho priestoru: výška 750 mm, šírka 650 mm, hĺbka 400 mm Vonkajšie rozmery: výška 1800 mm, šírka 920 mm, hĺbka 1345 mm Teplotný pracovný rozsah: Teplotný rozsah: -40°C až +180°C Rýchlosť chladenia: 4 K/min Rýchlosť ohrievania: 4 K/min Maximálna tepelná záťaž pri +20°C: 3500 W Teplotná stálosť v čase: ≤± 0,3 K Klimatický pracovný rozsah: Teplotný rozsah: +10°C až +95°C Rozsah vlhkosti: +10 % až +98 % rF Pripojenie: 400 V +6% / -10%, 3/N, 50 Hz Menovitý prúd: 9,4 A Menovitý výkon: 4,8 kW Hmotnosť: cca 450 kg Chladivo: R404A Typ: CTS C-40/200 Pri našich ponúkaných komorách vykonávame nasledujúce kroky: Chjdpfxshwhzws Afwjf 1. Kontrola funkčnosti a výmena potrebných komponentov 2. Nové naplnenie chladivom v súlade s legislatívou 3. Po úspešnej kontrole je komora podrobená skúšobnej prevádzke, ktorú monitorujeme kalibrovanými zariadeniami. Stav: použitý / used Obsah balenia: (viď obrázok) (Zmeny a chyby v technických údajoch sú vyhradené!) Ďalšie otázky radi zodpovieme telefonicky.

Stav: veľmi dobrý (použitý), Zwick / Roell Temperature Chamber for AllroundLine Here we offer you a Zwick / Roell temperature chamber for the AllroundLine. Description: Zwick / SFL Severn Furnaces Limited Zwick/Roell temperature chambers for tests in the temperature range of -80°C to +250°C Reproducible test results and perfect integration of the temperature chamber into the testing system. External dimensions: Depth 1050 mm, Width 600 mm, Height 800 mm Internal dimensions: Depth 530 mm, Width 450 mm, Height 650 mm Chedok Rutpopfx Afwof Temperature chambers for the AllroundLine Cooling via LN2 (liquid nitrogen). -80°C connection for external supply, not included in the scope of delivery. Type: EC75A-1-0-1-0 Condition: used Scope of delivery: (See picture) (Specifications are subject to change and errors excepted!) We are happy to answer further questions by telephone.

Stav: veľmi dobrý (použitý), We offer you a temperature shock test chamber here. Weiss Temperature Shock Test Chamber, Air-cooled Specification: - Temperature range hot chamber: +60°C … +220°C - Temperature range cold chamber: -10°C … -80°C - Changeover hot/cold chamber: 10 s - Temperature constancy: ±1 K Dimensions and further data: - External dimensions: Height 1990 mm - Width (without and with door hinge): without approx. 1820 mm, with approx. 1850 mm - Depth (without and with test chamber door): without approx. 900 mm, with approx. 1155 mm - Dimensions of lift basket (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm - Volume: 130 liters - Maximum chamber load: 20 kg - Maximum test chamber floor load: 20 kg - Cooling water pressure: min. 2 ... max. 6 bar - Maximum circuit breaker: 35 A (32 A CEE plug) - Sound pressure level, 1 m in front of the device: approx. 65 dB(A) - Refrigeration cascade: water-cooled - Electrical connection values: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW - Rated current: 26.0 A - Refrigerant: R 404A / R23 - Weight: approx. 950 kg Cjdjlgux Aopfx Afwshf Type: TS 130 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications reserved!) If you have further questions, we are happy to assist you by phone.

Stav: veľmi dobrý (použitý), Here we offer a TIRA temperature test chamber. TIRA Temperature Test Chamber, air-cooled The chamber offers the option for an external test box with external sensor connection, thus also usable as an external temperature control unit. Temperature range: -20°C...+140°C Temperature stability over time: ± 0.1°C...± 0.3°C External dimensions: Width 860 mm x Depth 1500 mm x Height 2100 mm Codponyh T Sjfx Afwohf Test chamber dimensions: Width 601 mm x Depth 545 mm x Height 692 mm Electrical connection: 400V +6% / -10% 50Hz 3P+N+PE Rated current: 10.0 (max. 17) A Rated power: 5.2 (max. 9.0) kW Net weight: 735 kg Refrigerants: R404A / R23 Type: TTRE 2001S For your safety as a buyer, please note the following information! The following procedures are carried out in advance on all chambers offered: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. Following successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Technical specifications and details are subject to change and errors!) If you have any further questions, feel free to contact us by phone.

Stav: veľmi dobrý (použitý), Aktívny chladiaci systém Ponúkame vám aktívny chladiaci systém. Aktívny chladiaci systém Typ: EOL EMP 242 Stav: použitý Dodávané príslušenstvo: (viď. obrázok) Chodpfon Apnasx Afwsf (Zmena a omyl v technických údajoch vyhradený!) Ďalšie otázky radi zodpovieme telefonicky.

Stav: veľmi dobrý (použitý), Heraeus Heating and Drying Oven We offer a Heraeus heating and drying oven for sale. Heraeus Heating and Drying Oven Up to 250°C Manufacturer / Model: Heraeus UT 6060 Features: Chsdpfxsn Arqlo Afwjf Temperature range: up to 250°C Net volume: 52 liters Weight (empty): 53 kg Internal dimensions: Depth 403 mm, Width 340 mm, Height 380 mm External dimensions: Depth 744 mm, Width 535 mm, Height 552 mm Rated voltage: 230V 50/60Hz Rated current: 6.8 A, Rated power: 1.50 kW Type: UT 66060 Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data and specifications are reserved!) For further questions, we are happy to assist you by phone.

Stav: veľmi dobrý (použitý), Espec We are offering an Espec (ThermoTec) Stress Test Chamber. Overpressure humidity tests at over 100 degrees Celsius in various modes. Program capacity: 10 profiles with 30 steps per profile. A range of protective mechanisms; overheat/overpressure protection, water supply failure detection, full door locking, and temperature sensor. Saturated temperature range: 105 to 142.9°C Unsaturated temperature range: 105 to 132.9°C Humidity range: 50 to 100% r.h. Rated pressure: 0.196 MPa at 132.9°C and 100% r.h. External dimensions: Width 740 x Height 1553 x Depth 1000 mm Test chamber dimensions: Width 355 x Height 355 x Depth 426 mm Other features: - Supplied with rails and grid shelves - Sample ports inside the chamber Type: EHS-221M Scope of delivery: See pictures Weight: 300 kg Chsdpfx Aon Arznefwof Condition: Used Scope of delivery: (See picture) (Specifications and technical information subject to change and correction!) For further questions, feel free to contact us by phone.