Rovema Vpx 250 For Powder kúpiť použité (27 241)

Stav: dobrý (použitý), Rok výroby: 2014, Funkcionalita: plne funkčný, číslo stroja/vozidla: K500-50739, celková dĺžka: 14 000 mm, celková výška: 2 500 mm, celková šírka: 3 600 mm, typ vstupného prúdu: trojfázový, výška produktu (max.): 100 mm, výška produktu (min.): 30 mm, dĺžka produktu (min.): 500 mm, maximálna dĺžka produktu: 1 800 mm, maximálna šírka produktu: 1 500 mm, šírka produktu (min.): 600 mm, vstupné napätie: 400 V, pripojenie stlačeného vzduchu: 6 lišta, vstupný prúd: 33 A, pracovná výška: 900 mm, priechodová výška: 250 mm, šírka stola: 1 700 mm, dĺžka stola: 2 000 mm, rok poslednej generálnej opravy: 2022, hmotnosť obrobku (max.): 100 kg, Výbava: dokumentácia / manuál, Overall machine dimensions: Width: 3,600 mm Length: 10,600 mm (excluding infeed and outfeed areas) Height: 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Properties of PE shrink flat film: • Shrink film suitable for shrink sealing process. (Top and bottom film must be sealable on the sides inside the tunnel.) • Biaxial shrinkage: approx. 50-60% longitudinal, approx. 40-50% transverse • Anti-static treated. • Shrink film with needle perforation improves the shrink process and offers higher gas and water vapor permeability. Ndedpfx Alsvvlyijcjb Shrink film to be used: • Biaxially shrinking, needle-perforated. • Wound on rolls, tight and with straight edges. Film thickness: approx. 40 - 60 µm Film widths: 800 mm, 1100 mm, 2000 mm Maximum roll outer diameter: 350 mm Minimum core outer diameter: 90 mm Calculation for bottom film: pack width + 200-250 mm Calculation for top film: pack width + (2 x height) + 200-250 mm Technical component data: Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13 - 23 m/min Roller conveyor after tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13 - 23 m/min KFE Standard Film Wrapping Machine: Max. film roll width, top and bottom: 2,100 mm / Max. product height (pass-through): 250 mm / Max. film roll diameter: 350 mm Film thickness: approx. 40-60 µm, good quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustable range: 500 - 1,600 mm / Feed rate, adjustable: 13 - 23 m/min Shrink tunnel ST/II -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Conveyor length: 3,560 mm Feed rate, adjustable: 6 - 23 m/min The machine can be inspected on-site at the production location.

Stav: použitý, Rok výroby: 2004, Swing diameter 250 mm Turning length 100 mm Control system SIEMENS 840 D Total connected load 35 kW Machine weight approx. 7,500 kg Space requirement approx. m E M A G Vertical CNC hard turning and grinding machine with tool turret and automatic workpiece feed Type VSC 250 DS Year of manufacture 2004 # M7 28.69324 Max. turning diameter 250 mm Turning length internal/external approx. 100 mm Workpiece length min./max. 29 – 100 mm 6-position tool turret, diameter or swing circle 480/790 mm Ndjdpfxjt Hxa Te Alcob Cross-slide travels X / Z (workpiece slide!) / stroke 680 / 400 / 200 mm Feed / rapid traverse X/Z 45 / 30 m/min Feed force X/Z 5.5 / 11 kN Spindle speeds 4,300 / 6,000 rpm Spindle drive approx. 28 kW Total drive approx. 35 kW - 380 V – 50 Hz Weight 7,500 kg Accessories / Special features • CNC path control SIEMENS 840 D with color display, graphics menu-guided dialog programming and all common options, cycles, subroutines, etc. • 6-position hex turret with 6 toolholders (ø 40), no powered tools, but equipped as a swivel axis (B-axis), double supported with direction logic • 2 GMN grinding spindles at turret positions T 3 and T 6, speeds approx. 42,000 rpm and 18,000 rpm, each equipped once with a CBN wheel and once with a ceramic pin • Workpiece feed unit with circulating system via drag frame for workpieces approx. 130 mm • MARPOSS MIDA – tactile measuring system at workpiece change for pre- and finished dimension • NORGREN air gap measurement system (?), hydraulic weight compensation of main spindle, • SMW-Autobloc 3-jaw diaphragm chuck (for easier gripping of raw parts), approx. Ø 250 mm, with clamping monitoring • HYFRA recooling unit for main spindle cooling and thermal stabilization of machine body, elaborate SEITZ paper band filter system and retractable chip conveyor, cooler for grinding emulsion, oil mist extraction, magnetic separator, central lubrication system, etc. Vertical CNC lathes offer a thermo-stable design (chips do not fall into the machine bed), fast workpiece changeover times (pick-up system via main spindle), and a stable tool arrangement that also enables non-standard machining operations. Here, hardened gears were hard-turned and ground. Condition : good – shortly available for demonstration Delivery : ex stock – as inspected Payment : strictly net – upon receipt of invoice

Stav: nový, Funkcionalita: plne funkčný, Rok výroby: 2026, nosnosť: 250 kg, Výbava: žeriav, GEDA KOSI GRAĐEVINSKI LIFT COMFORT 250 12M NOVÝ TYP: GEDA COMFORT, NOVÝ, r.v. 2026 Výrobca: GEDA, Nemecko Pohon: 1,3 kW/230 V/50 Hz Nosnosť: max. 250 kg Rýchlosť zdvíhania: 30 m/min Príslušenstvo pre zdvih do výšky 12 m obsahuje: - Elektromotor - Hlavica s kladkou - Štandardný vozík s bezpečnostnou brzdou - Počiatočná koľajnica 2,0 m - Predĺženie 250/2 m x 4 ks - Predĺženie 250/1 m - Koleno (od 20 do 45°) - Univerzálny kôš (82 x 35 x 70 cm) +++++ ++GEDA ŠIKMÝ VÝŤAH DOSTUPNÝ AJ S NOSNOSŤOU 200 KG – MODELOVÝ RAD 'STANDARD'++ +++++ +++++VYŽIADAJTE SI LEPŠIU PONUKU NA GEDA STANDARD 200+++++ +++++GEDA JE IDEÁLNY NA ZDVIHANIE SOLÁRNYCH PANELOV+++++ +++PRE VÝŠKU ZDVIHANIA DO 14 M SA PRIDÁVA ĎALŠIA KOĽAJNICA 2,0 M+++ ++++ŠPECIÁLNA AKCIOVÁ CENA PRE 14M: CENA NA VYŽIADANIE++++ +++MOŽNÝ NÁKUP AJ PRE 10M, 16M, 18M, 20M atď.+++ +++++ +++++VYŠŠIA VÝŠKA GEDA VÝŤAHU NAD 21m:+++++ ++++S 43 M LANOM MOŽNO POSKLADAŤ GEDA AŽ DO MAX. 21M ZDVIHU+++ +++STAČÍ DOOBJEDNAŤ ĎALŠIE 2-METER KOĽAJNICE+++ Nedpfsxvyagox Alcsdb +++MOŽETE SI VYBRAŤ RÔZNE ZDVIHOVÉ VÝŠKY—10M, 12M, 16M, ++++18m++20m++22m++24m++26m++28m++atď.+++ +++++UVEDENÁ CENA JE ZA 12M+++++ +++V ZÁVISLOSTI NA POČTE 2-M KOĽAJNIC, KTORÉ OBJEDNÁTE+++ +++AK POTREBUJETE DĹŽKU NAD 21M – MONTUJEME VÁM++ +++++GRATIS DĹHŠIE LANO 63M+++++ +++++ +++++OD PROFESIONÁLOV PRE PROFESIONÁLOV+++++ +++++ MONTÁŽ MOŽNÁ AJ NA TERASÁCH, BALKÓNOCH, PLOCHÝCH STRECHÁCH, ALEBO OKNÁCH, PRÍPADNE PRI LEŠENÍ AKO VERTIKÁLNY VÝŤAH+++ ++NA ZDVIHANIE MATERIÁLU PRI PRÁCACH NA FASÁDE+++ +++++S ODSKOKOM GEDA VARIO–ÚPRAVA+++++ +++++(VYROVNÁVANIE KOŠA DO VODOROVNEJ POLOHY)+++++ +++++ ZÍSKATE VERTIKÁLNY VÝŤAH +++++ +++++TAKŽE MÁTE 2 VÝŤAHY V 1+++++ ATEST pre šikmý výťah od oprávnenej spoločnosti na testovanie a kontrolu. +++ORIGINÁLNE GEDA MONTÁŽNE A PREVÁDZKOVÉ INŠTRUKCIE V HR JAZYKU+++ +++AKCIOVÁ CENA GEDA 250 IBA 4 900 €+++ +++AKCIOVÁ CENA GEDA 200 IBA 4 200 €+++ +++++12 MESAČNÁ ZÁRUKA!+++++ +++++ +++++VŽDY SKLADOM, IHNED K ODBERU VIAC KUSOV GEDA VÝŤAHOV+++ +++++STANDARD 200 KG +++++ a +++++COMFORT 250 KG+++++ +++++PRE VŠETKY ĎALŠIE OTÁZKY JE NÁŠ TÍM K DISPOZÍCII+++++ NAJLEPŠIE JE NÁS ZAVOLAŤ A ZISTIŤ, KTORÝ GEDA ŠIKMÝ VÝŤAH JE NAJVHODNEJŠÍ PRE VAŠE POTREBY +++++ ++++SME HLAVNÝ OFICIÁLNY ZÁSTUPCA A SERVISNÉ CENTRUM PRE ORIGINÁLNE GEDA STAVEBNÉ VÝŤAHY V SLOVENSKEJ REPUBLIKE UŽ VIAC AKO 30 ROKOV+++++

Stav: pripravené na použitie (použité), Rok výroby: 2010, The following is for sale: a turning line for drive shafts, including an end machining machine (cutting to length & drilling). The line consists of the following machines: Lang-Laru > for cutting to length and drilling; 3x Emag VTC 250 for turning the drive shafts. All machines are linked with an Ewab conveyor belt. Each turning machine is loaded by a KUKA robot. The technical data for the machines can be seen in the images. Ndodpfxsupgbwo Alcob

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. Nodpfx Ajfz U S Ejlcedb - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2006, stav: pripravené na použitie (použité), Travel X/Y/Z: 800mm/800mm/800mm, feed force X/Y/Z: 15,000N/15,000N/17,500N, feed rate X/Y/Z: 50m/min, max. rotary table speed: 25 rpm, spindle diameter: 100mm, tool holder: HSK 100, spindle power S1-100%: 40kW, spindle speed: 6,000 rpm. Magazine positions for max. tool diameter of 280mm: 23. Max. pallet dimensions X/Y: 630mm/630mm, max. pallets in system: 6, coolant tank capacity: 1,500l, 50 bar high-pressure pump flow rate: 22l/min. Machine dimensions X/Y/Z: approx. 6,300mm/4,900mm/4,000mm, weight: approx. 19,300kg, control: Siemens 840D powerline, operating hours: 74,637h. Includes integrated IPM tool monitoring, remote diagnostics via modem, Renishaw MP10 probe, 4-position rotary storage RSP, chip conveyor, coolant system with Knoll VRF 250 vacuum rotary filter, pallet changer, 6x pallets (4x clamping towers with universal clamping rails), approx. 100x HSK 100 tool holders, and Losma filtration unit. Documentation available. On-site inspection possible. Expected to be available from the end of January 2025. Ndedpouxdhuefx Alcjb

Stav: nový, Rok výroby: 2026, Funkcionalita: plne funkčný, číslo stroja/vozidla: PEF-2.5 PULVER EINBRENNOFEN ELEKTRISCH, teplota: 230 °C, vykurovací výkon: 30 kW (40,79 k), vnútorná dĺžka: 2 500 mm, vnútorná šírka: 1 505 mm, ✈️ Plus shipping costs – Shipping available on request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy Efficiency Class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready for immediate operation! ✳️Maintain your liquidity! We offer you a wide range of financing solutions to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty, or leasing programs. ☘️Eco-friendly☘️⚡️Green energy⚡️☘️ ⭐ Powder Curing Oven with Electric Heating - ✔️ Internal dimensions: 2500mm L * 1505mm W * 1800mm H ✔️ Electric heating power: 30 kW/h ✔️ Blower: 3000 m³/h 80mmSS ✔️ Recirculation fan output: 1.5 [kW/h] ✔️ Total: 35 kW/h ±10% ✔️ Digital temperature control, infinitely adjustable up to 220°C ✔️ Sandwich panels inside: 1.5 mm galvanized steel, outside: 1.5 mm powder-coated steel ✔️ Curing temperature, curing time, and exhaust fan function adjustable ✔️ Acoustic signal at the end of the curing cycle ✔️ Insulated door with special locking systems (snap lock) ✔️ Insulation: 150 mm (150 mm rock wool) 🔥 PEF-2.5 Curing Oven – Your versatile industrial oven for drying and curing processes! 🔥 Whether powder coating, wet paint, plastics processing or other thermal processes – the powder curing oven is your reliable solution for professional curing and drying procedures up to 230 °C! 🌡️ _____ 🚚 Maximum loading flexibility • Compatible with ceiling rail systems • Optional: shelf racking system for small batches _____ ⚙️ Smart control – the way you need it: ✅ PID control (optional) for precise temperature management ✅ Touchscreen control panel & smartphone operation 📱 (optional) ✅ Weekly & monthly reports at the push of a button (optional) ✅ Timer function: freely programmable from 10 minutes up to 24 hours ⏲️ ✅ Automatic shutdown at end of process _____ Ndjdpfjwfgbrjx Alcjb ♨️ Ramp Heating Mode (optional) Precisely control temperature ramp and holding times, e.g.: • Reach target temperature in a set time • Hold for desired duration • Controlled cooling-down to target temperature • Automatic notifications upon process events _____ 🛡️ Safety is top priority 🟢 Safety sensor to prevent overheating 🟢 Automatic shut-off in case of malfunction 🟢 Acoustic warning signals in case of errors 🟢 Solvent & fume extraction via automatic ventilation _____ ⚡ Customizable energy & heating system 🔥 Also available with upgrade to 400 °C for high-temperature processes (optional) _____ 🧠 No need to repeat settings! The oven stores your process parameters – batch after batch. This saves time and eliminates errors. _____ 📢 And best of all: If you have special requirements – we also manufacture custom ovens to your specifications! Contact our expert team for a personal consultation! _____ ☀️ 2-YEAR WARRANTY ☀️ Request more information

Rok výroby: 2020, stav: nový, Automation Use of a photoelectric cell Ndodpfxjflq Spe Alcob The use of a photoelectric cell in the workpiece area enables you to measure the length of the workpiece, and consequently gives you the ability to activate the spray guns when the object is within range, and immediately deactivate them upon completion of the coating process. The photoelectric cell is included as standard equipment. Identification of parts using special tags. A plate with identification holes is placed over the suspension. On this basis, and in combination with the photoelectric cell, the PLC control system identifies the coated part, switches the spray guns on and off at the correct times, thereby saving both energy and powder. Vertical detection of workpiece features. By using light barriers with horizontal sensors, the PLC can analyze the vertical shape of the workpiece. The PLC counts the time when the part is expected to enter the spray zone, so that the guns can be switched on or off selectively. Use of light barriers with multiple sensors (horizontal and vertical). This solution allows accurate measurement of workpiece dimensions, enabling even manipulators to be precisely controlled. Advantages of using light barriers and photoelectric cells The main advantages of using photoelectric cells or light barriers are savings in both energy and powder. You can eliminate the unnecessary coating of areas where there are no parts present. With the use of light barriers, precise control of the guns is possible. Our lines can be optionally fitted with photoelectric cells or light barriers. The use of a photoelectric cell in the workpiece area enables you to measure the length of the workpiece and thus provides the option to activate the spray guns when the object is within range and to immediately deactivate them after the workpiece is finished. Identification of parts with special tags. A plate with identification holes is placed over the suspension. On this basis, and in combination with the photoelectric cell, the PLC control system identifies the coated part, switches the spray guns on and off at the correct times—thereby saving energy and powder. By using light barriers with horizontal sensors, the PLC can analyze the vertical shape of the workpiece. The PLC counts when the part appears in the spray booth, allowing for selective activation or deactivation of the guns. Use of light barriers with multiple horizontal and vertical sensors This solution allows for precise measurement of the workpiece's dimensions, enabling manipulators to be adjusted accordingly. The main advantages of using photoelectric cells or light barriers are, first and foremost, savings in powder and energy; elimination of coating in zones without any parts; and, with the use of light barriers, highly accurate gun control. Gun row vertical: 8 spray guns Control unit – profiControl 10" Cyclone – CK-D1250 Dust collector – OZ-8H Center – RP-01 + SV-200 Manipulator MA1-23 x 2 units Axis X MX-100 x 2 units Horizontal gate – Horizontal gate W400 x 2 units Vertical gate – Vertical gate H2000 Maximum coating speed: 1.65714285714286 m/min 0 towing units Required air flow: 10,188 m3/h Required min. cabin clearance: B900mm H2100mm Pipe diameter: 500 mm – at least 16.9 m/s (16 m/s) Air consumption: 1,210 l/min + suggestion: SC-20 compressor Min. St

Stav: veľmi dobrý (použitý), Katalógové číslo: 7545 Nsdpfxjztad To Alcedb TECHNICKÉ ÚDAJE šírka pásu: 250 mm šírka hriadeľa: 220 mm maximálny priemer kotúča: 300 mm priemer otvoru kotúča: 60 mm výška rezu: 100 mm šírka stola: 650 mm dĺžka stola: 1460 mm – zhora: 2 rady západiek, hladký klzný hriadeľ, hriadeľ s pílami, hladký klzný hriadeľ – zdola: vodiaca lišta, západky, pás, 2 druhy posuvných rýchlostí + plynulé nastavenie, centrálne mazanie posuvový motor: 1,2 kW hlavný motor: 21 kW priemer odsávacej prípojky: 180 mm celkové rozmery dĺžka/šírka/výška: 1700x1450x1500 mm hmotnosť: cca 1800 kg – talianska výroba – dokumentácia DTR – robustný stroj – použitá multipiła vo veľmi dobrom stave Cena bez DPH: 25 900 PLN Cena bez DPH: 6 160 EUR podľa kurzu 4,2 EUR (Ceny sa môžu meniť pri vyšších výkyvoch)

Stav: veľmi dobrý (použitý), Katalógové číslo 7445 TECHNICKÉ ÚDAJE - šírka pásu 250 mm - šírka valca 400 mm - max. priemer kotúča 400 mm - priemer otvoru kotúča 80 mm - max. výška rezu 140 mm - šírka stola s priechodom 730 mm - dĺžka stola 2120 mm *zhora: - západky - prítlačný valec, hladký - západky - prítlačný valec, hladký - valec s pílovými kotúčmi - hladké prítlačné valce, 2 ks zdola: - vedenie - posuvný valec, hladký - západky - pás - centrálne mazanie - 2 lasery - plynulá regulácia rýchlosti posuvu - posuvný motor 1,1 kW - hlavný motor 37 kW - elektrické zdvíhanie tela 0,75 kW - elektrické zdvíhanie valca s pílovými kotúčmi 0,75 kW - priemer odťahového hrdla 200 mm - celkové rozmery d/š/v 2200x1850x2100 mm - hmotnosť približne 3000 kg VÝHODY - nemecká výroba - laser - elektrické zdvíhanie tela a valca - plynulá regulácia rýchlosti posuvu - viacpílový stroj, použitý, veľmi dobrý stav Čistá cena: 109 900 PLN Čistá cena: 25 558 EUR v závislosti od kurzu 4,30 EUR (Ceny sa môžu meniť v závislosti od výraznejších výkyvov kurzu) Ndedpfx Aljzx Rntjcob

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Ndsdpfxofz Nb Te Alcob Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Stav: použitý, Hand-operated turret lathe: GDW Type/Model: RD 250 Condition: Used Centre height: 125 mm Distance spindle nose – turret head, max.: 400 mm Swing over bed: 260 mm Swing over cross slide: 128 mm Spindle nose DIN 55027: Size 4 Spindle bore: 38 mm Internal taper similar to DIN 228: MK 5 Collet capacity: 26 mm Infinitely variable speed up to: 60–3,000 rpm Regulated AC motor, 100% duty cycle, 70 Hz: 4.6 kW Turret travel: 100 mm Cross slide travel: 90 mm Turret tool holder: 6x 3/4" Length x width x height: approx. 1300 x 700 x 1,400 mm Weight, depending on configuration: approx. 520 kg Connected load: 9 kW Equipment: - Vibration-damped direct drive for the main spindle, infinitely variable with electromagnetic spindle brake and spindle stop in case of emergency stop - 6-position slant turret slide with Ø 3/4" mounts - Infinitely variable feed rate setting - Turret slide with feed drive - Collet chuck (pneumatically actuated) - Extensive collet set - Emergency-stop push button Ndjdpfx Aezcb Rujlcsb - Coolant system - Spindle guard

Stav: použitý, Rok výroby: 2016, prevádzkové hodiny: 18 071 h, Funkcionalita: plne funkčný, číslo stroja/vozidla: 06960000941, výkon motora vretena: 25 000 W, maximálna rýchlosť vretena: 5 000 ot./min, rýchly posuv osi Y: 30 m/min, krútiaci moment: 280 Nm, vstupné napätie: 400 V, celková hmotnosť: 6 000 kg, výkon: 25 kW (33,99 k), vstupná frekvencia: 50 Hz, výrobca ovládačov: Siemens, model regulátora: Sinumerik 849D sl, vstupný prúd: 63 A, typ nástroja: VDI 40, počet osí: 3, DMG MORI CTV 250, druhá generácia – vertikálna sústružnícka frézka (s automatickým podávačom), rok výroby 2016 Na predaj je ponúkaná dobre udržiavaná DMG MORI (Gildemeister) CTV 250, druhá generácia, rok výroby 2016, s iba 18 071 prevádzkovými hodinami vretena. Stroj je plne vybavený pre automatizovanú sériovú výrobu súčiastok a momentálne je v prevádzkovom stave – obhliadka a predvedenie je možné po dohode. Riadenie a pohon Siemens Sinumerik 840D sl (Slimline) vrátane možnosti ShopTurn AC hlavný pohon 25 / 32 kW, krútiaci moment 280 / 360 Nm Rýchlosť vretena až 5 000 ot./min, trvalá prevádzka 100 % / 40 % ED Prázdny upínací valec, programovateľný upínací tlak prostredníctvom NC programu Osi a nástroje Revolver s 12 stanicami (priemer kotúča 340 mm), všetky stanice sú poháňané (UDI 40) Os C s poháňaným systémom nástrojov Os Y +90 / −65 mm Lineárne vedenia, guľôčkové skrutky, sklenené meradlá, AC servomotory s absolútnym enkodérom Rýchly posuv 30 m/min Nodpfx Alszi R R Necjdb Automatizácia a meracia technika Systém prenosu obrobkov SRA 160 (ťahový reťaz, NC riadený) vrátane sady ťahového rámu Kapacita pamäte: 30 dielov (Ø 30–70 mm, max. 7 kg) resp. 18 dielov (Ø 30–100 mm, max. 15 kg), max. celková hmotnosť 320 kg vrátane paliet Priemer obrobku 30–160 mm, výška obrobku max. 160 mm Rozhranie pre robot Profinet (elektrické rozhranie pre 6-osového robota) Dotykový snímač obrobku Renishaw LP2DD na stanici pre nakladanie/vykladanie, presnosť merania 10 µm, s čistením pomocou stlačeného vzduchu Chladiaca kvapalina a periférne zariadenia Chladiaci systém 8 / 20 bar, nádrž 600 l, vysokotlakové čerpadlo 20 bar / 40 l/min Prívod chladiacej kvapaliny prostredníctvom otočného kotúča na všetky stanice Páskový filtračný systém 40 µm s vynútenou indexáciou, monitorovanie hladiny chladiacej kvapaliny Kĺbový páskový dopravník triesok s predĺženým vyprázdňovacím šachtou (+300 mm), zväčšená nádoba na triesky, modifikované čerpadlo na bahno Balík na obrábanie hliníka Integrované odsávanie pracovného priestoru max. 400 m³/h, preplachovanie pracovného priestoru s 3 preplachovacími spojkami Chladenie rozvádzača až do 40 °C, chladič hydraulického oleja Odfuk vzduchu cez hlavné vreteno, 4-farebné výstražné svetlo Diaľková diagnostika cez internet Príkon: 400 V / 50 Hz, 40 kVA, 63 A · Hmotnosť: približne 6 000 kg Predaj je z miesta uskladnenia, demontáž/nakládka/transport po dohode resp. zabezpečuje kupujúci. Predaj je bez akejkoľvek záruky (obchodný predaj použitých strojov, kúpené tak, ako je). V prípade otázok alebo pre dohodnutie termínu obhliadky, prosím, kontaktujte nás.

Stav: pripravené na použitie (použité), Rok výroby: 2019, pojazdová vzdialenosť osi X: 4 000 mm, zdvih osi Y: 1 670 mm, zdvih osi Z: 500 mm, počet osí: 4, výkon motora vretena: 12 000 W, maximálna rýchlosť vretena: 24 000 ot./min, This 4s FORMAT4 Profit H200 13.33 was manufactured in 2019. It features a CNC gantry machining center with a working area of 4000 mm on the X-axis and 1670 mm on the Y-axis. The machine is equipped with a 12 kW electrospindle and a tool magazine with 12 positions. If you are looking for a high-quality woodworking machine, you should consider the FORMAT4 Profit H200 13.33 that we have for sale. Please contact us for further details. • Working area (maximum panel size): • X: 3300 mm • Y: 1280 mm • Z clearance: 250 mm • Spindle: • Tool interface: HSK F63 • Rated power at: approx. 12,000 rpm • Cooling: Air-cooled • Rotation: CW / CCW Nedpfezug Hqsx Alcodb • Tool magazine: • Linear tool magazine (side-mounted): 12 positions • Additional linear magazine on the gantry: 4 positions • Max. tool diameter: 250 mm • Max. tool length: 300 mm • Drilling unit: • Model: DH 24 6H 2S • Vertical spindles: 18 (12 in X, 6 in Y) • Horizontal spindles: 6 (4 in X, 2 in Y) • Max. drill length: 70 mm • Max. tool diameter: 10 mm • Grooving saw units: 2 (X and Y) • Max. saw blade diameter: 120 mm • Max. speed: 6,000 rpm • Vacuum table: • 6 consoles (instead of 4) • Dual-circuit vacuum system • Vacuum pod height: 100 mm • Pneumatic console locking • Adjustable side stops (Y-axis) • Axis system: • X-axis: Rack and pinion drive • Y/Z axis: Ball screw drive • Linear guides on all axes • Automatic central lubrication • Control and software: • CNC control with CAD/CAM software • 3D simulation preview • DXF import capability • Parametric programming • Remote maintenance package (internet-capable)

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. Ndsdpfxjfz Dt Ne Alcjb By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Use of Photoelectric Sensors Njdpfx Aofz Dubslcjdb The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. Nsdpefz I Edjfx Alcsdb - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Stav: ako nová (výstavný stroj), Rok výroby: 2025, prevádzkové hodiny: 1 h, - High-pressure cleaner PTC Torpedo Compact 21/250, 21/350, and 15/500 – similar, but not Dynajet, Oertzen, Falch, etc. - Cold water / hot water up to approx. 95°C and steam: 32 bar up to 140°C + high-pressure steam up to 150°C at 200 bar (only with 250 and 350 bar versions) and chemical-free weed control function at approx. 99°C The following models are available: - Torpedo Compact 23/250 | 23 l/min at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric start - Torpedo Compact 23/350 | 23 l/min at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric start - Torpedo Compact 16/500 | 16 l/min at 500 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric start - Torpedo Compact 16/250 PS (high-pressure steam) | 16 l/min at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric start - Torpedo Compact 16/350 PS (high-pressure steam) | 16 l/min at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric start - Dimensions and unladen weight without water tank: 1205x1250x1330 mm, approx. 280 kg - Dimensions and unladen weight with 300 l water tank: 1250x1900x1330 mm, approx. 350 kg - Dimensions and unladen weight with 500 l water tank: 1250x1900x1330 mm, approx. 350 kg - 80/100 kW diesel burner with electronic temperature control - High-pressure pump: Comet RW/TW triple plunger pump with ceramic plungers - Hour meter - Pressure gauge - Pressure regulator - Safety valve - Premium-quality frame made of painted steel with forklift slots Ndodpfxedqkrwo Alcsb - Stainless steel covers - Magnetic descaling device - incl. 20 m high-pressure hose, spray gun, lance, and 25° fan jet nozzle - Additional equipment such as a frame for water tank, 300 or 500 l water tank, water sandblaster kit, surface cleaner, rotary nozzle, sludge suction pump, steam nozzle, weed control lance and boom available on request

Rok výroby: 2010, stav: použitý, ILKWANG METAL SHEET ROLL FORMING LINE FOR ROOF PANEL PRODUCTION Urgent Sale - Reduced Price Scope of Supply: 1. Decoiler 2. Front Shear + Coil Guiding Table 3. Film Applicator 4. Cassette-type Roll Forming Machine Base Sections 5. Profiled Tile Panel Roll Forming Machine – “COPPO” type 6. Profiled Tile Panel Roll Forming Machine – “ATIIKA” type 7. Profiled Tile Panel Roll Forming Machine – “T177.5” type 8. Flying Shear (Cutting Machine) 9. Stretching Section 10. Automatic Stacker 11. Electrical Control Panel Technical Specifications: - Manufacturer: IL Kwang (Korea) - Year of Manufacture: 2010 - Material: Pre-painted galvanized steel sheet (ASTM A 526 / JIS G 3302 SGCC) - Tensile Strength: 250 ~ 320 MPA - Max. Coil Width: 1250 mm - Coil Thickness: 0.35 – 0.8 mm - Max. Coil Weight: 15 tons - Max. Outer Coil Diameter: 1300 mm Ndedpfx Ajymbfyjlceb - Inner Coil Diameter: 508 mm - Line Speed (length > 5 m): Max. 8 m/min - Speed Control: Frequency inverter control - Operating Voltage: 380V / 50Hz, 3-phase - Dimensions (L x W x H): Approx. 30 x 8 x 5 m Component Manufacturers: - Motor: Siemens (ICE type) - PLC + Inverter: Siemens 7 series - Servo: Mitsubishi (CE certified) - Touch Screen: Pro-face (CE certified) - Electrical Components: L.G (CE certified) *All technical details have been double-checked for accuracy per industry standards on platforms such as Machineseeker and TruckScout24.*

Rok výroby: 2025, stav: nový, The RM 250 rotor mill is ideally suited for comminuting soft to medium-hard samples such as chemicals, charcoal, limestone, ceramics (porous), coal, chalk, sulfur, citric acid, sugar, titanium shavings, tire wire, glass, and many more! max. feed size* Ndjdpfef Ulibsx Alcsb

Stav: veľmi dobrý (použitý), Rok výroby: 2018, Funkcionalita: plne funkčný, typ vstupného prúdu: Klimatizácia, špirálový podávač RNA SRC-N 550mm Vibračný podávač so regulátorom Výrobca/model: RNA SRC-N 250-2R Horný priemer bubna: 550 mm Dolný priemer bubna: 250 mm Napätie: 230 voltov 50Hz Stupeň krytia: IP 44 Frekvencia vibrácií pri 100Hz: 6000 /min Regulátor vibrácií Dolný priemer bubna: 250 mm Horný priemer bubna: 380 mm Vnútorná výška bubna: cca 70 mm Celkové rozmery: Výška: 700 mm Šírka: 600 mm Hmotnosť: 80 kg V dobrom stave! Nodpfjwav R Sex Alcjdb

Stav: ako nová (výstavný stroj), Funkcionalita: plne funkčný, výkon: 7,35 kW (9,99 k), vstupné napätie: 400 V, vstupná frekvencia: 50 Hz, priemer vretena: 30 mm, rozsah otáčania: 46 °, otáčky (max.): 18 000 ot./min, otáčky (min.): 1 000 ot./min, The new profil 92 M e-motion spindle moulder is the Format4 premium model for maximum operating convenience and guarantees absolute efficiency due to exceptionally short setup times during milling operations. The highly advanced electro-spindle features an HSK 63F interface for a tool quick-change system with pneumatic clamping. The swivelling range of ±46° offers virtually limitless processing versatility. Using the self-explanatory e-motion control system on the 15” touchscreen control panel, speed, spindle height and angle, as well as the fence and even the table opening, can be set intuitively and precisely. The memory slots for tools, spindles, and milling programs ensure perfect repeat accuracy and the shortest setup times. Controlled, eccentric insert rings provide maximum table support area and significantly reduce adjustment effort, especially when tilting the spindle. The newly developed, heavy-duty precision milling fence features two controlled axes for precise depth adjustment of the entire fence, as well as an additional, independent depth positioning for the infeed (right-hand) jaw. For convenient access during curved milling operations, the fence can also be completely swung out of the working area. Optionally, the Format4 profil 92 M e-motion can also be equipped with an electrically height-adjustable power feeder. Further technical data: Maximum tool diameter: 250 mm Usable spindle height: 140 mm Height adjustment: electric Additional equipment: 12 Potential-free contact 106 HSK 63F spindle, Ø 30 mm, 140 mm 118 “Integral” safety rules 650 mm 119 Table opening 255 mm with controlled, eccentric insert rings 183 Table extension on both sides 670 mm with pull-out frame 2200 mm 213 Electrically height-adjustable feeder support incl. horizontal tube 220 Parts list holder with clipboard A9 Advantages: Highly efficient electro-spindle with infinitely variable speed and HSK 63F interface Positioning control for milling height and angle +/–46° Positioning control for fence incl. offset Smartouch with intuitive e-motion control Table opening with controlled, eccentric insert rings (option) Electric height adjustment for the feeder on the overhead column (option) Further information: The electro-spindle features a quick-change system HSK F63 Clamping range: 2–25 mm for OZ25 collets “Integral” safety rules: 650 mm Nodjwztr Nspfx Alcsdb Table extension on both sides 670 mm with pull-out frame 2200 mm Table opening 255 mm with controlled, eccentric insert rings

Stav: veľmi dobrý (použitý), Katalógové číslo: 7548 TECHNICKÉ ÚDAJE šírka pásu: 250 mm šírka valca: 250 mm Nodpfx Aozwwuqjlcedb max. priemer kotúča: 350 mm vnútorný priemer otvoru kotúča: 80 mm max. výška rezu: 120 mm šírka stola s priechodom: 700 mm dĺžka stola: 1790 mm *zvrchu: záklopky pritlačný valec, hladký záklopky pritlačný valec, hladký valec s pílami hladké pritlačné valce: 2 ks zospodu: vedenie klzný valec, hladký záklopky pás centrálne mazanie posuvový motor: 1,1 kW hlavný motor: 30 kW elektrické zdvíhanie karosérie manuálne zdvíhanie valca s pílami priemer odsávacieho hrdla: 160 mm celkové rozmery dĺžka/šírka/výška: 2250x1700x2000 mm hmotnosť približne: 3000 kg – nemecká výroba – elektrické zdvíhanie korpusu a valca – plynulá regulácia rýchlosti posuvu – použitá multpíla, veľmi dobrý stav Neto cena: 68 900 PLN Neto cena: 16 400 EUR podľa kurzu 4,2 EUR (Ceny sa môžu meniť pri väčších výkyvoch kurzu)

Stav: dobrý (použitý), Rok výroby: 1974, Toto miešacie zariadenie bolo navrhnuté na intenzívne miešanie a vlhké granulovanie materiálov, ako sú prášky alebo granuláty. Pracovný objem: 63 – 200 litrov Celkový objem: 250 litrov Nôžová hlava: 4,9 / 6 kW, otáčky 1 500 / 3 000 min⁻¹ Miešacie náradie: 18,5 kW, dve rýchlosti otáčok Výrobca: Lödige Rok výroby: 1974 Rozmery (DxŠxV): 200 x 110 x 145 cm Ndedpfxjwa Tcfs Alcjb

Stav: veľmi dobrý (použitý), KATALÓGOVÉ ČÍSLO 7212 TECHNICKÉ ÚDAJE - šírka pásov 250 mm - šírka valca 400 mm - priemer valca 80 mm - max. priemer kotúča 400 mm - priemer otvoru kotúča 80 mm - max. výška rezu 140 mm - šírka stola s otvorom 730 mm - dĺžka stola 2130 mm zhora: - západky Ndedezxqv Dopfx Alceb - prítlačný, posuvný valec - západky - prítlačný, hladký valec - valec s pílovými kotúčmi - hladký, prítlačný valec 4 ks zdola: - posuvný, hladký valec - západky - pás podávací stôl + vodiaca lišta - šírka valca 460 mm - rozmery podávača d/š 1660 x 630 mm - celkové rozmery d/š/v 2010 x 630 x 900 mm výstupný stôl - ťahacie valce 8 ks - šírka valca 800 mm - celkové rozmery d/š/v 4400 x 980 x 880 mm - centrálne mazanie - elektrické zdvíhanie tela nahor/nadol 0,55 kW - elektrické nastavenie valca s pílovými kotúčmi 0,55 kW - plynulé nastavenie rýchlosti posuvu 1-39 m/min - motor posuvu 1,1 kW - hlavný motor 30 kW - priemer prívodného potrubia odsávania 210 mm - celkové rozmery viacpílového stroja d/š/v 2520 x 1870 x 2000 mm + ovládanie - celková hmotnosť približne 2500 kg VÝHODY - nemecká výroba - veľká výška rezu - podávací a výstupný stôl - použitý viacpílový stroj, veľmi dobrý stav Čistá cena: 89 900 PLN Čistá cena: 20 907 EUR Čistá cena vypočítaná podľa kurzu 4,30 PLN/EUR (pri väčších kolísaniach kurzu sa cena môže zmeniť)