Fliegl Zwp 180 Maxi kúpiť použité (7 559)

Stav: nový, číslo stroja/vozidla: a0a72d14f9b44bce47bc25ffb, konfigurácia náprav: 1 náprava, veľkosť pneumatiky: 11,5/80-15,3 alliance, Ďalšie informácie 40 mm ťažné oko Oporná noha s kolieskom Pneumatiky: 11,5/80-15,3 Alliance Bez odpruženia Vzdialenosť ťažného oka po stred sedlovej dosky: 3200 mm Nosnosť pneumatík: 5800 kg pri 30 km/h + 5150 kg pri 40 km/h Bez schválenia pre cestnú premávku, len na interné použitie! Lsdpfx Aloi Ri D Tscjab

Stav: nový, číslo stroja/vozidla: dd98a7658922be8f2e25bcadb, pohotovostná hmotnosť: 2 kg, maximálna hmotnosť nákladu: 8 kg, celková hmotnosť: 10 kg, konfigurácia náprav: 2 nápravy, veľkosť pneumatiky: 235/75 r 17,5, Further Information Chassis: Central axle trailer, low-bed design Fine-grain steel welded construction Telescopic support leg at the front Telescopic rear supports 2 wheel chocks with holders Mudguards made of steel sheet covering both wheels Drawbar system for central axle trailer Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 250 mm Axles and Suspension European axles of our choice, fitted with tapered roller bearings and S-cam brakes Axle/chassis laser alignment to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker balance) Wheels and Tyres 235/75 R 17.5, brand at manufacturer’s discretion Factory silver steel rims Brake System Dual-line compressed air brake system Spring-loaded parking brake 2 interchangeable coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, ABS connector at the front with connection cable Attention: The trailer may only be towed by vehicles that guarantee ABS functionality! Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red width marker lights at the rear 2 x 7-pin interchangeable plugs at the front, with connection cable Platform/Tub Low-mounted steel trough, deck made of steel/chequer plate, steel walls solidly welded to the floor Platform length: 4,500 mm Front and sides fitted with load-lock profiles for securing lashing straps (front: 8 pieces; each side: 12 pieces) Note: Slight floor waviness due to welding distortion possible! 2 pairs of lashing rings, 1x at the front corners of the steel trough and 1x at the rear in the floor, each rated 5 tonnes 2 additional pairs of lashing rings in the floor, each rated 5 tonnes Loading Ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable, with handgrip on the ramps Timber inlay With gas struts for single-person operation Lajdpfx Alei Ri Ebscjb Operating Instructions The specified gross weight is technically feasible; depending on the cargo, the gross weight may not be achievable due to the maximum permissible axle, support, and kingpin loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Approval/Country of Registration/Plates Country of registration: Germany With DEKRA inspection and certification (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on sides, red at the rear Paintwork Frame in RAL 3002 Carmine Red Loading ramps hot-dip galvanized Attention: Archive images!

Stav: nový, číslo stroja/vozidla: 8e6cf81e11b107f23f22f209a, konfigurácia náprav: 3 nápravy, veľkosť pneumatiky: 435/50 r19.5, Further information Fine-grained steel welded construction with preload for light pre-tensioning in the neck area, replaceable 2" kingpin saddle plate, slightly sloped outer frame, new design with load-lock profile for lashing strap attachment, 24 t 2-speed landing gear, single-side operation, straight lower part, without sliding compensation. Laodpfx Alei Ri E Heceb Note: Free landing leg corner measurement or free rear swing radius approximately 1,930 mm, sliding ladder at the rear, door retainer on the side, 2 wheel chocks with holders, side underrun protection in aluminum, rear underrun protection in galvanized steel, quarter-shell mudguards in front of the 1st axle and behind each axle, with anti-spray mud flaps according to EC, rear impact protection. SAF disc brake axles, axles/chassis laser measured to reduce tire wear and fuel consumption, air suspension. 2-line compressed air brake system, color-coded line routing for easy maintenance, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front, without connecting line, EBS (Electronic Braking System) with EBS socket at the front, without connecting cable. Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of ABS! With raise & lower valve, vehicle driving stability system. 435/50 R19.5 tires (manufacturer at manufacturer’s discretion), steel rims, factory silver. 24 Volt, multi-chamber lights, side yellow LED lighting, 2 white position lights at the front, 2 white/red tracking lights at the rear, two 7-pin non-interchangeable sockets at the front, without connecting cable. Floor: anti-slip phenolic plywood flooring approx. 30 mm thick on longitudinal crossmembers for high point load capacity for forklift axle load up to max. 7,100 kg. Front wall / corner posts front: 2,580 mm high, corner posts in steel volumetric design, release device for side curtain at front wall, crash blocker with steel rear impact protection inside at approx. 140 mm height. Mid-stakes: 3 pairs of sliding stanchions adjustable over the full length, with 4-fold insert pockets and long pocket at the bottom, 3 pairs of stake positions. Insert slats: 5 rows wooden insert slats. Rear wall / corner posts rear: Rear corner posts steel up to lower edge of roof, tarp hang-in with round tube and tensioning ratchet, rear portal doors, double-wing with 2 internal locking rods each. Tarp: tarp with welded horizontal and vertical belts, stainless steel tension locks. Roof: sliding roof, end lift at rear foldable, roof can be slid from rear to front, L-roof rail for automotive industry, internal width between roof rails approx. 2,490 mm, tarp color: white, 400 roof non-elastic, minimal roof rail deflection during loading, optimal rain gutter at rear, top at rear end reinforcement above the doors, EcoLift – lift roof can be raised by approx. 380 mm with gas strut support, 3 driving positions at the front: internal height at the front approx. 2,900 mm/2,950 mm/3,000 mm, set to approx. 3,000 mm. Germany, EC 2007/46 type approval, 24/7 service hotline, Fliegl manufacturer's certificate for body strength according to EN 12642 XL, prepared for single-line license plate holder, warning sign according to ECE-70, reflective tape: white (continuous at the bottom of the curtain sides and top at the corners—if visible sideboards, then tape below at sideboards), reflective tape: red, around the rear portal. Frame DB 7350 Novagrau, 10-year anti-corrosion warranty, landing legs coated bla

Stav: nový, číslo stroja/vozidla: a3b1347da4aa7f31dceb875db, pohotovostná hmotnosť: 2 kg, maximálna hmotnosť nákladu: 9 kg, celková hmotnosť: 11 kg, konfigurácia náprav: 2 nápravy, veľkosť pneumatiky: 235 / 75 r 17,5, Further information Chassis central axle trailer Fine-grain steel welded construction 6 pairs of lashing rings bolted on the exterior floor/outer frame, each rated at 5t Gear support leg at the front Foldable rear support 2 wheel chocks with holders Steel underride guard Full-width rear spray flaps Quarter-shell mudguards Central axle trailer towing device Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles + suspension BPW drum brake axles Axle/chassis laser alignment (reduces tire wear and fuel consumption) Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization (rocker equalization) Wheels and tires 235 / 75 R 17.5 (manufacturer's choice) Factory silver steel rims Brake system Dual-line air brake system Manual spindle parking brake Integral air reservoir 2 non-interchangeable coupling heads at the front with connection lines to the towing vehicle ABS and ALB, with ABS socket at the front, with connecting cable Note: The trailer may only be towed by tractor vehicles that ensure the functionality of the ABS! Electrics 24 Volt, multi-chamber lights, side-mounted amber LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connecting cable Floor Steel/chequer plate floor, designed for high point loading Note: Slight floor rippling due to welding distortion possible! Platform length approx. 5200 mm Rear ramped section approx. 900 mm Front wall / front corner stakes 25 mm aluminium hollow profile, 320 mm high Sidewalls 25 mm aluminium hollow profile, 320 mm high, foldable and removable Rear wall / rear corner stakes 1 pair of steel stakes fixed to the frame with holder for securing loading ramps, entry width approx. 2430 mm Loading ramps 2 steel ramps, 2300 mm long, 510 mm wide, laterally adjustable with a grab handle on each ramp Wooden deck Gas pressure springs for one-person operation Operating notes The specified gross weight is technically possible; depending on the type of load, the total weight may not be achievable while complying with permissible axle, support, and saddle loads. (Poor driving or tracking may result from incorrect load distribution) Country of registration/plates Registered in: Germany With Dekra approval and certification (according to §13 EC-FGV) 24/7 service hotline Lodpfoi Ri Ilox Alcoab Prepared for single-line number plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame: DB 7350 Novagrau. 10-year anti-corrosion warranty Front wall: aluminium Side walls: anodized aluminium Loading ramps: hot-dip galvanized Note: Archive images!

Stav: nový, číslo stroja/vozidla: f044065451f6d849ee7a5b9f8, pohotovostná hmotnosť: 5 kg, maximálna hmotnosť nákladu: 29 kg, celková hmotnosť: 35 kg, konfigurácia náprav: 3 nápravy, veľkosť pneumatiky: 385 / 65 r 22,5, Ďalšie informácie Podvozok - sedlový prepravník Oceľová zváraná konštrukcia v zosilnenom vyhotovení, iba 2 pozdĺžniky ako dvojitý I-nosník so strešným/riflovaným plechom medzi pozdĺžnikmi, sedlová doska s vymeniteľným 2" kráľovským čapom. Ochranný kryt zadných svetiel. 1 úložný box z ocele, zapustený medzi pozdĺžnikmi 8 párov upevňovacích ôk priskrutkovaných alebo privarených na rám podľa výberu výrobcu 24 t dvojrýchlostná oporná navijaková noha, ovládanie z jednej strany, s rovným spodným dielom, bez rozdelenia ťažnej sily 2 kliny pod kolesá s držiakom Bočný nárazový kryt z hliníka Lodpsi Rivwjfx Alcjab Podnárazový ochranný rám - pozinkovaná oceľ Blatníky polovičné s protišmykovými zásterkami podľa EÚ 1 držiak rezervného kolesa pre 1 E-koleso, so sadou na upevnenie kolesa 8 ks drevených stojanov pre podľa voľby výrobcu, priskrutkované na rám, každý s 2 teleskopickými drevenými kolmi v rozsahu 1800 – 2800 mm, za pár do 7 t Nápravy + pruženie SAF brzdové kotúčové nápravy s priemerom kotúča 430 mm Vzduchové pruženie s ventilom na zdvíhanie a spúšťanie, zabezpečovacie lano na nápravách 1. náprava automatická zdvíhacia náprava vrátane núteného sklápania a rozjazdovej pomoci, ovládanie 3x brzdenie (rozjazdová pomoc funkčná do prekročenia nosnosti nápravy o 30 % a do rýchlosti max. 25 km/h) Rozostup náprav posunutý mm (kombinovaná doprava) do 44 t celkovej ťažnej hmotnosti Kolesá a pneumatiky 385 / 65 R 22,5 podľa voľby výrobcu Oceľové disky, továrenská striebristá farba Brzdový systém Dvojokruhový tlakový vzduchový brzdný systém Parkovacia brzda s pružinovým akumulátorom Detekcia zaťaženia nápravy cez EBS-Canbus signál, pre zobrazenie cez displej v kabíne vodiča, LKW musí byť prispôsobený, bez inštalácie do LKW (nie je to kalibrovaná váha) 2 nezameniteľné spojkovacie hlavy vpredu, bez prepojovacieho vedenia EBS, Elektronický brzdový systém s EBS zásuvkou vpredu, bez prepojovacieho kábla Upozornenie: Príves môže byť ťahaný len vozidlami, ktoré zaručujú funkčnosť ABS! Elektrika 24 voltov, viackomorové svetlá, bočné žlté LED osvetlenie 2 biele pozičné svetlá vpredu 2 bielo/červené pozičné svetlá vzadu 2 x 7-kolíková a 1 x 15-kolíková nezameniteľná zásuvka vpredu, bez prepojovacieho kábla Predná stena/rohové stĺpiky vpredu Oceľová/mriežková predná stena, cca 2 300 mm vysoká, priskrutkovaná k rámu Schválenie / značky Krajina schválenia: Nemecko Typové schválenie podľa EU 2007/46 pripravené na jednoradový držiak tabuľky Obrysové vyznačenie reflexnými páskami podľa ECE R 048, bočné biele a zadné červené Lakovanie Rám DB 7350 Nová sivá Oporné nohy čierne lakované Predná stena žiarovo pozinkovaná Upozornenie: Archívne obrázky!

Stav: nový, číslo stroja/vozidla: bdf30cb8a53c70e900bdb40a7, pohotovostná hmotnosť: 2 kg, maximálna hmotnosť nákladu: 9 kg, celková hmotnosť: 11 kg, konfigurácia náprav: 2 nápravy, veľkosť pneumatiky: -, Further Information Chassis Central Axle Tipper Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm spherical tipping bearing Front gearbox support leg 2 wheel chocks with holder Steel underrun protection Lajdpsi Riwisfx Alceb Full-width rear mudflaps Quarter shell wheel arches Lockable storage compartment for drive-on ramps beneath the loading platform Central axle trailer drawbar Drawbar with certified 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + Suspension BPW drum brake axles Axles/chassis laser aligned for reduced tyre wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization (rocker balance) Wheels and Tyres 235 / 75 R 17.5 Manufacturer’s choice Factory silver steel rims Braking System 2-line compressed air braking system. Colour-coded hose routing for easy service. Hand spindle parking brake Integral air reservoir ABS and ALB, with ABS plug on the front, with connection cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 foolproof coupling heads at the front, with connecting lines to the truck Electrics 24 Volt, multi-chamber lamps, yellow LED side lighting 2 white front position lights 2 white/red rear marking lights 2 x 7-pin foolproof plugs at the front, with connection cable Hydraulics Three-way tipping system, hydraulic multi-piston press with lift limit and safety cable, Low pressure cylinder up to max. 170 bar, without restrictor. If required, this must be retrofitted on the truck. Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Operated hydraulically via truck PTO Tipper Body Robust tipping body with 4 mm steel floor plate, steel side wall construction, continuous side walls, foldable and pendulum mounted with central locking below. Rear corner posts removable. Rear wall foldable and pendulum mounted, with central locking below. Platform length approx. 4,500 mm, side walls with 5 bottom hinges. Platform width 2,420 mm 5 pairs of lashing eyes in the floor, each rated for 5 tonnes Operating Notes The specified gross weight is technically possible, but depending on the cargo, the permissible gross weight may not be achievable due to axle, support or fifth-wheel load limits. (Poor driving and tracking performance may occur due to incorrect load distribution) Registration/Country of Approval/Plates Country of approval: Germany With Dekra inspection and report (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective tape according to ECE R 048, white on sides and red at rear Paintwork Frame hot-dip galvanized incl. passivation 15-year warranty against rust-through Side walls/body RAL 3002 Carmine red Rear supports, loading ramps, and storage box available as extras at additional cost Note: Archive images

Stav: nový, číslo stroja/vozidla: 068983c41e44eb5660fa9100c, pohotovostná hmotnosť: 6 kg, maximálna hmotnosť nákladu: 28 kg, celková hmotnosť: 35 kg, konfigurácia náprav: 3 nápravy, veľkosť pneumatiky: 435/50 r19,5, Ďalšie informácie Podvozok: sedlový príves na diaľkovú prepravu Zvarená konštrukcia z jemnozrnnej ocele, krk konštrukcie s ľahkým predpätím (preload), sedlová doska s vymeniteľným 2" kráľovským čapom X-tra Long, s vnútornou dĺžkou 15030 mm Vonkajší rám mierne skosený, nová verzia s Load-Lock profilom pre zavesenie upínacích popruhov 24 t 2-stupňová oporná noha, ovládanie z jednej strany, s rovným spodným dielom, bez kompenzácie posunu Poznámka: Voľná oporná noha (uhlový rozmer, voľný polomer otočenia dozadu cca. 1930 mm) Výsuvný rebrík vzadu Bočné dorazové držiaky dverí 2 kliny na podloženie kolies s držiakom Bočný nárazník z hliníka Zadný ochranný rám z pozinkovanej ocele Štvrtinové blatníky pred 1. nápravou a za každou nápravou Zadný ochranný rám proti nárazu Nápravy a odpruženie SAF kotúčové brzdové nápravy Laserom meraný podvozok a nápravy (znižuje opotrebenie pneumatík a spotrebu paliva) Vzduchové odpruženie Brzdový systém 2-vedenie tlakovzdušnej brzdovej sústavy Farebné vedenie rozvodov pre jednoduchú údržbu Pružinovo-parkovacia brzda 2 nezameniteľné spojovacie hlavy vpredu, bez prepojovacej hadice EBS, elektronický brzdový systém so zásuvkou EBS vpredu, bez prepojovacieho kábla Pozor: Príves môže byť ťahaný len ťažným vozidlom, ktoré zaručuje správnu funkciu ABS! s posúvačom zdvihu/spúšťania Systém stability jazdy vozidla AAC Basic, automaticky odľahčovaná posledná náprava na manévrovanie, do 20 km/h, manuálne vypnuteľná Detekcia zaťaženia náprav cez EBS-Canbus signál pre zobrazenie na displeji vodiča (SSV musí byť pripravený, nie je kalibrovaná váha) Kolesá a pneumatiky 435/50 R19,5, výrobca podľa výberu dodávateľa Oceľové disky, výrobné strieborné prevedenie Elektroinštalácia 24 V, viackomorové svetlá, bočné žlté LED osvetlenie Bočné žlté LED osvetlenie napojené na smerovky, blikajúce bočné svetlá 2 biele pozičné svetlá vpredu 2 bielo-červené svetlá na udržanie jazdnej dráhy vzadu 2 x 7-pinové nezameniteľné zásuvky vpredu, bez prepojovacieho kábla Podlaha Protitlakové preglejkové dosky cca 30 mm silné, na pozdĺžnych podperných nosníkoch, vysoké bodové zaťaženie, vhodné pre osové zaťaženie vysokozdvižného vozíka do max. 7 100 kg Predný čelný rám / Rohové stĺpiky 2 580 mm vysoké, rohové stĺpiky z ocele v objemovom prevedení, uvoľňovací mechanizmus na bočnú plachtu na čelnej stene, vo vnútri v dolnej časti (cca 140 mm vysoko) oceľový nárazník (crash blocker) Stredové stĺpiky 3 páry posuvných stĺpikov po celej dĺžke s 4-násobnými vkladacími kapsami, spodná časť s dlhým otvorom. 3 páry pozícií pre stĺpiky Vkladacie laty 5 radov drevených vkladacích lát Zadný rám / Rohové stĺpiky vzadu Rohové stĺpiky vzadu z ocele po spodnú hranu strechy, upevnenie plachty pomocou okrúhlej rúry a napínacej račny Zadné portálové dvere, dvojkrídlové s dvoma vnútornými otočnými tyčovými zámkami na krídlo Laodpfx Aji Riwuolcjb Plachta Plachta so zvarenými horizontálnymi a vertikálnymi popruhmi Západky z nehrdzavejúcej ocele Strecha Posuvná strecha, zadná časť zdvíhateľná Endlift, plachta posuvná odzadu dopredu, L-profil strešného nosníka pre automobilový priemysel, vnútorná šírka medzi nosníkmi cca 2 490 mm, farba plachty: biela Neelastická strecha, minimálne prehnutie pri nakladaní a vykladaní EcoLift – zdvíhacia strecha so zdvihom cca 380 mm obojstranne, s plynovými vzperami, 3 polohy vpredu: vnútorná výška vpredu cca 2 900 / 2 950 / 3 000 mm, aktuálne nastavená na cca 3 000 mm Optimálny odkvap vzadu, navrchu na zadnom ráme nad dverami Prevádzkové pokyny Pri prekročení celk

Stav: nový, číslo stroja/vozidla: 628cde0fe99cc2d3c8eaa8dd8, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, veľkosť pneumatiky: 235 / 75 r 17,5, Ďalšie informácie Podvozok nízkopodlažného prívesu Oceľová zváraná konštrukcia Otočná oje s robustným guľôčkovým ložiskom Sklopná zadná podpera 2 kliny na podopretie s držiakom Bočná ochrana proti nárazu z hliníka Celoplošné zadné zástierky Polovičné blatníky na 1. náprave s protišmykovými zástierkami a protišmykové zástierky za 2. a 3. nápravou 1 plastový náradový box s policou, šírka=620/výška=360/hĺbka=440 mm, uzamykateľný visacím zámkom (zámok nie je súčasťou dodávky) Rozšírenie výsuvné na 3 000 mm Úložný priestor pre drevené klady v strede ložnej plochy Drevené klady 70 mm pre rozšírenie na 3 000 mm Uchytenie na viazanie (40 upevňovacích bodov na nízkopodlažnom podvozku) 1 pár úchytov v prednom pozdĺžnom nosníku, každý na 10 t 4 páry otvorov na viazanie v vonkajšom ráme, každý pre 5 t (na upevnenie napínacích popruhov) 7 párov viazacích bodov (zápustné priemyselné prstence) hore a po bokoch vonkajšieho rámu, každý pre 10 t 1x vpredu na ohybe rámu 6x v nízkopodlažnom lôžku Prvý upevňovací bod 250 mm odpredu, posledný max. 250 mm od konca, rozostup bodov max. 1100 mm 5 párov vreciek na kolíky, zapustených do vonkajšieho rámu, vnútorný rozmer 70 x 40 mm (možnosť prestavby na prstence na upevnenie 5 t, nie sú súčasťou výbavy) 2 páry sklopných upevňovacích bodov navyše, každý pre 10 t 1x na ohybe rámu (vyčnieva) 1x za poslednou nápravou, zapustený v podlahe Ťahacie zariadenie otočného prívesu Ťahacie oje so schváleným 40 mm závesným okom Nápravy a odpruženie Bubnové brzdové nápravy podľa výberu výrobcu Laserové zameranie náprav a podvozku, znižuje opotrebenie pneumatík a spotrebu paliva Parabolické odpruženie s bezúdržbovým oceľovo-gumovým uložením a mechanickým vyrovnávaním náprav (hojdací vyrovnávač) Kolesá a pneumatiky 235 / 75 R 17,5 podľa výberu výrobcu Oceľové disky v zdvojenom usporiadaní, továrenská strieborná Brzdový systém 2-okruhový tlakový vzduchový brzdový systém Pružinová parkovacia brzda 2 neprehoditeľné spojovacie hlavice vpredu s prepojovacími hadicami na ťažné vozidlo ABS a ALB, s ABS konektorom vpredu, s prepojovacím káblom Značka: Wabco alebo Knorr Elektrická inštalácia 24 V, viackomorové svietidlá, bočné žlté LED osvetlenie 2 biele pozičné svetlá vpredu 2 bielo-červené vodiace svetlá vzadu 2x 7-pólové neprehoditeľné konektory vpredu s prepojovacím káblom 1 LED maják s držiakom, prepínaný cez obrysové svetlo (svetlo odnímateľné) 2 páry výsuvných výstražných tabúľ LED, rozšíriteľné na 3 000 mm Podlaha Predný ohyb so strešným plechom / vzorovaným plechom Úložný box vo výjazdovej šikmine smerom k ohybu rámu Lajdpsi Ri Ddefx Alceb Následne 70 mm mäkké drevo, v oblasti blatníkov oceľová / vzorovaná platňa Zadná šikmina s 70 mm mäkkým drevom Ložná plocha nízkopodlažná vrátane zadnej šikminy 6 500 mm Najazďovacie rampy Oceľové rampy, 2 800 mm dlhé, 750 mm široké, posuvné do strán Drevený nášľap S pomocou zdvíhacej pružiny Krajina registrácie / ŠPZ Krajina registrácie: Nemecko 24/7 servisná linka Príprava na dvojriadkový držiak ŠPZ Kontúrne označenie reflexnými pruhmi podľa ECE R 048, bočné biele a zadné červené Výstražná tabuľa podľa ECE - 70 Lakovanie Rám žiarovo zinkovaný vrátane pasivácie 15 rokov záruka na prekorodovanie Ťahacie oje zinkované alebo čierne podľa výberu výrobcu Najazďovacie rampy žiarovo zinkované Upozornenie! Jedná sa o archívne fotografie!

Stav: nový, číslo stroja/vozidla: abc6276e1749f9dddc494eb32, pohotovostná hmotnosť: 4 900 kg, maximálna hmotnosť nákladu: 30 100 kg, celková hmotnosť: 35 000 kg, konfigurácia náprav: 3 nápravy, veľkosť pneumatiky: 385/65 r22,5², Further information Chassis Semi trailer tipper Fine-grain steel welded construction, lightweight design, kingpin plate with exchangeable 2-inch kingpin. Patented curved front bulkhead Central telescopic landing leg, unhitching when loaded not possible, when uncoupled the vehicle must be positioned with a rearward incline. 2 wheel chocks with holder Folding underrun protection Half-shell mudguards Integrated mudguard holder with stone-repellent surface Splash guard only on rearmost axle 1 tarpaulin support rod with holder 2 rear towing hooks Axles and suspension SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis, reduction in tire wear and fuel consumption Axles in off-road version Air suspension 1st axle automatic lift axle, incl. forced lowering and traction aid, activated by braking 3 times (traction aid operates up to 30% axle overload and up to max. 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against corrosion Brake system 2-line compressed air brake system, color-coded line layout for easy servicing Spring-loaded parking brake 2 foolproof coupling heads at the front, without connection lines Ljdpoi Ri H Ijfx Alcjab EBS (Electronic Braking System) with EBS socket at the front, without connecting cable Note: The trailer must only be towed by vehicles that ensure the effectiveness of the ABS! With raise and lower valve Vehicle driving stability system Automatic tip lowering with shut-off valve Wheels and tires 385/65 R22.5, make at manufacturer's discretion Steel rims painted silver Electrics 24 Volt, multi-chamber rear lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin foolproof sockets at the front, without connection cables Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck PTO Bodies Aluminium box body made from high-quality, abrasion-resistant grade, front wall 5 mm thick, with external end walls made from 30 mm hollow-chamber profiles, cleanly welded, with bulk material repellent upper rail profiles. Interior with access at the front wall (not suitable with Cramaro cover). Shovel and broom holder outside on front wall. Greenline – conical and aerodynamic body shape Membrane tailgate Tailgate as swinging flap with double-joint hinge, external mounting with dual hook locking. Tailgate with rubber seal, Note! Heat-resistant up to max. 170°C! Floor continuous 6 mm thick Standing platform with access, connection plate for air/electricity and brake with large clearance for optimum operability. Roll tarpaulin stowable to the right, with central locking to the left Operating instructions For transportation of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent material corrosion and rust. The specified total weight is technically possible, but may not be achieved depending on the cargo, due to observed permissible axle/support/kingpin loads. (Poor driving and trailing behavior possible with incorrect load distribution) Country of registration/plates Germany Approval according to EC 2007/46 24/7 Service Hotline Prepared for single-line number plate holder Conspicuity markings with reflective tape according to ECE R 048, white on sides and red on rear

Stav: nový, číslo stroja/vozidla: 074630ca1b8dc2d710f82c15a, pohotovostná hmotnosť: 3 980 kg, celková hmotnosť: 35 000 kg, konfigurácia náprav: 3 nápravy, veľkosť pneumatiky: 385/65 r22.5, Further information Chassis Semi-Tipper Fine-grain steel welded construction, lightweight design, kingpin plate with interchangeable 2-inch kingpin Curved front end, patented Without landing leg Wheel chocks with holder Folding underrun guard Half-shell mudguards Integrated mudguard brackets with stone-repellent surface Rear tow hook Axles & Suspension SAF disc brake axles Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle including forced lowering and start assist, activated after braking three times (start assist functional up to axle overloading of 30% and up to a maximum speed of 25 km/h) Galvanized lift axle mechanism, 10 years warranty against corrosion Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 anti-mistake coupling heads at front, without connecting line EBS, electronic braking system with EBS socket at front, without connection cable Note: The trailer may only be towed by towing vehicles that can ensure the ABS works properly! With raise & lower valve Lodoi Ri H Sspfx Alcoab Vehicle – driving stability system Wheels and Tires 385/65 R22.5, manufacturer as per OEM preference Polished aluminum rims, manufacturer as per OEM preference Electrics 24 Volt, multi-chamber lights, side yellow LED lights 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Actuation hydraulically via truck PTO Bodies Aluminum box body made of high-quality, wear-resistant material, front wall 5 mm thick with external, end walls made of 30 mm hollow chamber profiles, neatly welded, with bulk material-repellent top edge profile. Access steps inside at the front wall (not in combination with Cramaro). Shovel and broom holder mounted on the outside front wall. Greenline – conical and aerodynamic body design Membrane tailgate Tailgate as pendulum flap with double joint hinge, mounted externally with double hook locking Tailgate with rubber seal. Note! Heat resistant up to max. 170°C! Continuous 5 mm thick floor, Brinell 110. Note! Only for transporting sand, gravel, and round gravel with a maximum grain size of up to 20 mm! All other transported goods are excluded from the warranty! Standing platform with access, connection plate for air/electric and brake with ample space for optimum handling. Roll tarp can be stored to the right-hand side, with central locking to the left Operational Instructions For the transport of salt, lime, etc., we recommend a tipping cylinder with hard-chromed piston rod to prevent material attack and rusting. The specified total weight is technically possible. Depending on the type of load, the total weight may not be achieved in compliance with permissible axle, support, and fifth wheel loads. (Poor driving and trailing behavior may occur due to incorrect load distribution.) Revolution Link: Revolution Link User Report: Registration Country/Plates Germany With Dekra approval and certificate (in accordance with §13 EC - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau Body R

Stav: nový, číslo stroja/vozidla: 45d76d32267904923b7adcdea, pohotovostná hmotnosť: 4 980 kg, maximálna hmotnosť nákladu: 30 020 kg, celková hmotnosť: 35 000 kg, konfigurácia náprav: 3 nápravy, veľkosť pneumatiky: 385/65 r22.5, Further Information Chassis Semi-Tipper Fine-grain steel welded construction, lightweight design, fifth wheel plate with replaceable 2-inch kingpin Patented curved front end 24 t, 2-speed landing gear, single-sided operation, with straight lower part, without compensator Wheel chocks with holders Folding underrun protection Half-shell mudguards Integrated mudguard bracket, surface resistant to stones Tow hook at rear Axles & Suspension SAF disc brake axles Axles/chassis laser-measured to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuated by 3x braking (starting aid functional up to axle load exceeded by 30% and up to a maximum speed of 25 km/h) Hot-dip galvanized lift axle mechanism: 10-year warranty against corrosion Braking System 2-line pneumatic brake system, color-coded piping for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at front, without connecting pipe EBS, Electronic Braking System with EBS socket at the front, without connecting cable Caution: The towed vehicle may only be hauled by towing vehicles that guarantee effective ABS operation! With raise/lower valve Vehicle stability control system Wheels and Tyres 385/65 R22.5, manufacturer according to OEM's choice Polished aluminium rims, manufacturer according to OEM's choice Electrics 24 Volt, multi-chamber tail lights, side LED marker lights (yellow) 2 white position lights at front 2 white/red outline marker lights at rear 2 x 7-pin connectors at front (no connecting cable) Hydraulics Low-pressure hydraulic cylinder, max. 170 bar, lowest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operated hydraulically via truck PTO Body/Tipping Body Aluminium box-type body made of high-quality, wear-resistant alloy; front wall 5 mm thick, external side walls made from 30 mm hollow-chamber profiles, cleanly welded, with bulk material-deflecting upper rail profile. Interior access on front wall (not in combination with Cramaro). Shovel and broom holder on outer front wall. Greenline - conical and aerodynamic body shape Membrane rear wall Rear wall is a pendulum flap with double-joint hinge, external mounting, double hook locking. Rear wall with rubber gasket. Note: Heat resistant up to max. 170°C! Floor continuous, 5 mm thickness, Brinell 110. Note: Only suitable for transport of sand, crushed stone and gravel with maximum grain size up to 20 mm. All other transported goods are excluded from the warranty! Ljdpfei Ri Idox Alcsab Standing platform with access ladder, connector plate for air/electrical and brake system, with ample space for optimal operation. Roll tarp, stowed on right-hand side, central locking on left-hand side Operating Instructions For transport of salt, lime, etc., we recommend a tipping cylinder with hard-chromed piston rod to prevent corrosion and material attack. The specified total weight is technically possible; depending on the load, the total weight may not be achievable while observing permissible axle, support and fifth-wheel loads. (Poor driving and tracking behaviour possible due to incorrect load distribution.) Revolution Link: Revolution Link Testimonial: Registration/Country Germany With Dekra test and certificate (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Reflective contour marking according to ECE R0

Stav: nový, číslo stroja/vozidla: 55d3c5c03e032385649769b1b, pohotovostná hmotnosť: 9 900 kg, maximálna hmotnosť nákladu: 14 100 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, veľkosť pneumatiky: 235 / 75 r 17,5, Ďalšie informácie Podvozok nízkozdvižného prívesu Oceľová zváraná konštrukcia Otočný čap s robustným guľovým otáčavým vencom, integrovaný úložný box vrátane Predná časť s otočným čapom Sklápateľné zadné podpery 2 kliny na podloženie kolies s držiakom Bočný ochranný kryt z hliníka Zadná zásterka v celej šírke Roztiahnuteľné rozšírenia až do 3000 mm (nie v zadnom skosení) (Rozchod prepravovaných stavebných strojov alebo vozidiel však nesmie presiahnuť vonkajšiu šírku rámu 2 550 mm) Stredová úložná schránka na drevené trámy na ložnej ploche Drevené trámy 70 mm na rozšírenie na 3000 mm Miesta na uchytenie – nízkozdvižný príves 3 páry bodov na zaistenie nákladu, každý po 10 ton, integrované v podlahe vpredu 6 párov „zurrpilz“ v hornej a bočnej časti vonkajšieho rámu, každý po 10 ton 1 x v oblasti krku ostatné rozdelené v rozstupe max. 1200 mm 1 x zadné skosenie 5 párov vreciek na stĺpiky integrované vo vonkajšom ráme, vnútorný rozmer 70 x 40 mm (možná prestavba na 5 t upevňovacie oká, nie je súčasťou dodávky) Závesné zariadenie prívesu s otočným čapom Ťažná oje so schváleným 40 mm ťažným okom Upozornenie! Pri 40 mm ťažnom oku môže byť max. prípustná celková hmotnosť ťahača 18 000 kg, inak je nutné použiť 50 mm ťažné oko. Nápravy a odpruženie SAF bubnové brzdové nápravy Nápravy/podvozok laserovo merané na zníženie opotrebenia pneumatík a spotreby paliva Parabolické pruženie s bezúdržbovým oceľovo-gumovým uložením a mechanickým vyrovnávačom zaťaženia vpredu a vzadu (kyvadlové vyrovnávanie) Kolesá a pneumatiky 235/75 R 17,5 podľa výberu výrobcu Oceľové disky v dvojitej montáži, továrenská strieborná Ledpji Ri I Eefx Alcsab Brzdový systém Dvojokruhová tlaková vzduchová brzda Pružinová parkovacia brzda 2 neprehoditeľné spojovacie hlavice vpredu, s prepojovacími hadicami k ťahaču, ABS a ALB, s ABS zástrčkou vpredu, s prepojovacím káblom Pozor: Príves smie ťahať len ťahač s funkčným systémom ABS! Elektrická výbava 24 V, viackomorové svetlá, bočné žlté LED osvetlenie 2 biele predné obrysové svetlá 2 bielo/červené zadné obrysové svetlá 2x 7-pólové neprehoditeľné zástrčky vpredu, s prepojovacím káblom 1 LED maják s držiakom, ovládaný cez parkovacie svetlo (svetlo odnímateľné) 2 páry výstražných tabúľ, dvojité, podsvietené LED, výsuvné do 3000 mm Podlaha Predná časť oceľová podlaha, ďalej s 70mm mäkkým drevom, v oblasti podbehov oceľový/károvaný plech Zadné skosenie so 70mm mäkkým drevom Najazdové rampy Oceľové rampy, 2800 mm dĺžka, 750 mm šírka, bočne posuvné s dreveným povrchom s podpornou pružinou Prevádzkové upozornenia Pri záťaži nápravy 10 000 kg je potrebné výnimočné povolenie, možné len pre nedeliteľný náklad!!! Uvedená celková hmotnosť je technicky možná, v závislosti od nákladu nemusí byť celková hmotnosť dodržaná vzhľadom na povolené zaťaženie náprav/podpory/sedlového čapu. (Zlé jazdné a jazdné vlastnosti pri zlom rozložení záťaže možné) Krajina registrácie/štítky Krajina registrácie: Nemecko 1x s Dekra kontrolou a znaleckým posudkom (podľa §13 EG - FGV) 24/7 servisná linka pripravené na dvojriadkový držiak ŠPZ Obrysové značenie s reflexnými pásmi podľa ECE R 048, bočne biele a vzadu červené Lakovanie Rám podľa RAL 3002 karmínovo červený 10-ročná záruka proti prehrdzaveniu Ťažná oje pozinkovaná alebo čierna, podľa výberu výrobcu Najazdové rampy žiarovo pozinkované Pozor: Archivné fotografie!

Stav: nový, číslo stroja/vozidla: 8df1ead53cc82aeb51e50a37d, pohotovostná hmotnosť: 4 kg, maximálna hmotnosť nákladu: 13 880 kg, celková hmotnosť: 18 kg, konfigurácia náprav: 2 nápravy, veľkosť pneumatiky: 235 / 75 r 17,5, Further information Chassis: Turntable/Pivot Drawbar for Waste Disposal Fine-grain steel welded construction Container locking devices: - 2 pairs of locking hooks recessed into the floor - Pneumatic actuation The container locking is a 2-point system which acts from the inside; it is not possible to lock roll-off containers with an internal web (for transport of roll-off containers with subframes according to DIN 30722). Note: At the beginning of the roller recess at the front, the container must be pushed on completely flat! Longitudinal guide rails offset to the side and removable, rails approx. 115 mm high Turntable with heavy-duty ball race ring 8 pairs of lashing mushrooms, recessed into the upper and side outer frame, each rated for 5 t 7 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm, (convertible to 5 t lashing rings, not included) 2 wheel chocks with holders Side underrun protection: aluminium Rear underrun protection: steel Quarter shell fenders according to EC regulations With anti-spray mudflaps according to EC Drawbar coupling (pivot drawbar trailer): Drawbar with tested 40 mm towing eye Axles & suspension: SAF drum brake axles Laser alignment of axles/chassis reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings Wheels and tyres: 235/75 R 17.5 Manufacturer’s choice Steel twin wheels, factory silver Braking system: 2-line compressed air brake system Spring-loaded parking brake 2 foolproof coupling heads at the front with connecting lines to the towing vehicle ABS and ALB, ABS socket at the front with connecting cable Attention: The trailer may only be towed by tractors that ensure proper ABS functionality! Electrical: Lodpfji Ri Nusx Alcjab 24 Volt, multi-chamber lights, yellow LED side lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin foolproof plugs at the front with connecting cable Floor: Steel floor Roller recess at the front of the floor for roll-off containers from 5,000 to 7,000 mm in length Note: Slight floor waviness due to weld warping possible! Loading ramps: Lockable storage compartment for loading ramps under the cargo area Operating notes: For a 10,000 kg axle load, a special permit is required. The permit must be applied for separately in each federal state; legislation does not guarantee approval for 20 t gross vehicle weight. Customer risk. The stated gross weight is technically feasible; depending on the cargo, the gross weight might not be achievable while respecting permissible axle, support, and kingpin loads. (Poor driving and trailing characteristics may result from improper load distribution) Country of registration/plates: Registration country: Germany With Dekra inspection and certificate (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line number plate holder Conspicuity marking with reflective tape according to ECE R 048, white on the sides, red at the rear Warning panel according to ECE-70 Paintwork: Frame: DB 7350 Novagrau 15 years warranty against perforation corrosion Note: Floor waviness may occur due to hot-dip galvanizing! Drawbar: KTL black Attention: Archive photos!

Stav: nový, číslo stroja/vozidla: 6d88bda3a1ee2464a81b34f36, pohotovostná hmotnosť: 4 kg, maximálna hmotnosť nákladu: 13 kg, celková hmotnosť: 18 kg, konfigurácia náprav: 2 nápravy, veľkosť pneumatiky: 235 / 75 r 17,5, Further information Chassis low-bed trailer Steel welded construction, with slight pre-tension in the center, turntable with heavy-duty ball bearing slewing ring, wheel chocks with holders, quarter shell fenders in front of and behind each axle Lashing eyes low-bed trailer Above front axle: 2 pairs of ring lashing eyes, each rated at 5t, located at the front curvature Low-bed section: 4 pairs of lashing eyes mounted laterally in the low-bed section, each rated at 6t 5 pairs of lashing eyes, each rated at 5t, positioned between the longitudinal beams Drawbar equipment for turntable trailer Drawbar with certified 40 mm towing eye, mechanically adjustable for length in 6 x 100 mm increments and lockable (Drawbar length 1,700 - 2,300 mm) Axles & Suspension BPW drum brake axles, each with 10 t axle load, slack adjuster. Axles with continuous brake test up to 105 km/h, rear axle manually removable. By releasing the air lock and lowering the rear section to the ground. Then disconnect the hoses from the rear section, insert the transport bar into one of the rear sockets and, by gently pressing down at the rear, simultaneously pull back to disengage the rear (parking brake released). After loading or unloading, move the rear section back and hook it in up to the marked position. Then raise the rear section to driving height and reconnect the hoses. Confirm bolt locking (visual check to confirm the bolts have engaged) and check the rear function. Air suspension with lift & lower valve Laedpfx Aoi Ri N Aslcjb Wheels and tyres 235 / 75 R 17.5, from leading manufacturers, twin steel rims, factory silver Brake system 2-line air brake system, spring-loaded parking brake, 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle, EBS, electronic braking system with EBS plug at the front, with connection cable Attention: The trailer must only be towed by vehicles that ensure the proper functioning of ABS! Electrics 24 Volt, multi-chamber lights, side yellow LED lighting, 2 white position lights at the front, 2 white/red track marker lights at the rear, revolving beacon with holder, controlled via parking light (beacon removable), 2 pairs of warning panels double LED illuminated and extendable to 3,300 mm, removable with plug, 2 x 7-pin fail-safe connectors at the front with connection cables, 1 x 7-pin agricultural connector, voltage converter 12/24 Volt (for electrics only, not for ABS/EBS) Floor Steel/chequer plate floor on the curvature, between longitudinal and cross beams with perforated sheet cover. Axle covers not drive-over capable, widening possible to 3,000 or 3,300 mm. Operating instructions Note: For 10,000 kg axle load, special approval is required. The permit must be applied for individually in each federal state; there is no guarantee from the legislator for 20t GVW. Customer risk. Special approval required if overall towing length exceeds 18,750 mm. Observe country-specific registration regulations. The specified gross weight is technically feasible; depending on the load, the gross weight may not be achievable while observing the permissible axle, support, and kingpin loads. Observe BO-circle! Registration / Registration plates Country of registration: Germany, with Dekra approval and certificate (according to §13 EC - FGV), prepared for single-line license plate holder, warning panel according to ECE - 70, contour marking with reflective strips according to ECE R 048 Paint Front frame hot-dip galvanized including passivation, rear

Stav: nový, číslo stroja/vozidla: f8fb99947a1c19bc4d63549ff, pohotovostná hmotnosť: 6 kg, maximálna hmotnosť nákladu: 17 kg, celková hmotnosť: 24 kg, konfigurácia náprav: 3 nápravy, veľkosť pneumatiky: 235 / 75 r 17,5, Ďalšie informácie Podvozok nízkozdvižného prívesu Oceľová zváraná konštrukcia Otočný čap s robustným guľovým otočným ložiskom Sklopná zadná opora 2 kliny na podloženie s držiakom Bočný ochranný kryt z hliníka Zadné lapače nečistôt po celej šírke Polkruhové blatníky na 1. náprave s protisprejovými lapačmi Protisprejovými lapačmi za 2. a 3. nápravou 1 plastový náradový box s policou, š:620/v:360/h:440 mm, uzamykateľný visiacim zámkom (zámok nie je súčasťou dodávky) Výsužné rozšírenia až na 3 000 mm (nie v zadnom skosení; rozchod prepravovaných strojov/nákladných vozidiel nesmie presiahnuť vonkajšiu šírku rámu 2 550 mm) Úložný priestor pre drevené fošne v strede ložnej plochy 70 mm drevené fošne na rozšírenie na 3 000 mm Kotviace oká – nízkozdvižný 1 pár zapustených okrúhlych kotviacich ôk vpredu na zalomení, á 5 t 7 párov kotviacich hríbov hore a na boku vonkajšieho rámu, každý 10 t 1x vpredu na zalomení 6x v nízkej časti ložnej plochy Prvé kotviace oko 250 mm odpredu a posledné max. 250 mm od zadu, vzdialenosť kotviacich ôk max. 1100 mm 5 párov vreciek pre kolíky zapustených vo vonkajšom ráme, vnútorné rozmery 70 x 40 mm (možnosť prestavby na 5 t okrúhle kotviace oká, nie sú súčasťou dodávky) 2 páry sklopných kotviacich ôk navyše, každé 10 t Lajdpfx Aoi Riwfslcob 1x na zalomení (prečnieva) 1x zapustené do podlahy za poslednou nápravou Závesné zariadenie otočného prívesu Ťažné oje s certifikovaným 40 mm ťažným okom Nápravy a odpruženie SAF bubnové brzdové nápravy Laserové meranie geometrie náprav/podvozku na zníženie opotrebenia pneumatík a spotreby paliva Parabolické listové pruženie s bezúdržbovými oceľovo-gumenými ložiskami a mechanickým rozdelením zaťaženia náprav (vyrovnávacie ramená) Kolesá a pneumatiky 235/75 R 17,5 Podľa výberu výrobcu s označením M&S Oceľové disky v dvojmontáži, továrenská strieborná Brzdová sústava Dvojokruhová tlaková vzduchová brzdová sústava Pružinová parkovacia brzda 2 zámenné vzduchové spojky vpredu s prepojovacími hadicami k ťažnému vozidlu ABS a ALB, s ABS konektorom vpredu, s prepojovacím káblom Značka: Wabco alebo Knorr Upozornenie: Prívesné vozidlo smie ťahať iba vozidlo zabezpečujúce funkčnosť ABS! Elektrická výbava 24 V, viackomorové zadné svetlá, bočné žlté LED osvetlenie 2 biele pozičné svetlá vpredu 2 bielo/červené obrysové svetlá vzadu 2x 7-pólové zámenné zástrčky vpredu, s prepojovacím káblom 1 LED maják s držiakom, ovládaný cez obrysové svetlá (snímateľný maják) 2 páry výstražných tabúľ, dvojité LED osvetlenie, výsuvné do 3 000 mm Podlaha Zalomenie vpredu s oceľovým/rebrovaným plechom Úložný box zapustený do stúpacieho skosenia k zalomeniu Potom 70 mm mäkké drevo, v oblasti nad kolesami oceľový/rebrovaný plech Zadné skosenie s 70 mm mäkkým drevom Nízkozdvižná ložná plocha vrátane zadného skosenia 6 500 mm Najazdové rampy Oceľové rampy 2 800 mm dlhé, 750 mm široké, bočne posuvné Dodatočné sklopné zabezpečenie proti bočnému posunutiu (nie pri hydraulickom bočnom posune rampy) Drevená výstelka Podporované zdvíhanie pružinou Prevádzkové upozornenia Pri nápravovom zaťažení 10 000 kg je potrebné výnimka, iba nedeliteľné náklady!!! Uvedená celková hmotnosť je technicky možná; v závislosti od druhu nákladu však nemusí byť možné dodržať povolené nápravové, podperné a ťažné zaťaženia. (Pri nesprávnom rozložení hmotnosti sú možné zlé jazdné a vodiacie vlastnosti) Krajina registrácie/ŠPZ Krajina registrácie: Nemecko Typové schválenie podľa EG 2007/46 24/7 servisná horúca linka Možnosť predĺženia záruky

Stav: nový, číslo stroja/vozidla: f80f2330e1318ef03bc20755e, pohotovostná hmotnosť: 3 200 kg, maximálna hmotnosť nákladu: 35 800 kg, celková hmotnosť: 39 000 kg, konfigurácia náprav: 3 nápravy, veľkosť pneumatiky: 385/65 r22.5, Further information Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2” kingpin, only two longitudinal beams as double T-beams for optional rear crane in new/current version, outer frame slightly angled with load-lock profile for lashing strap hooks. Note: To hook in straps in conjunction with side walls, the side walls must be opened! 24 t two-speed landing gear, single-sided operation, with straight lower section, without sliding compensation, wheel chocks with holder, foldable aluminium side underrun protection, extendable galvanized steel rear underrun protection, half-shell mudguards – supplied loose, not installed – with spray suppression flaps behind each axle, 1 plastic water tank, approx. 30l capacity, fitted front left Lasdpfxsi Riwqj Alceb BPW disc brake axles with 430 mm disc diameter, laser-measured axles/chassis reduce tyre wear and fuel consumption, air suspension, first axle with automatic lift axle function, additionally manually lowerable, operable via push button on the vehicle 2-line compressed air brake system with one central standard air reservoir, spring-type parking brake, 2 fail-safe coupling heads at the front, without connection line, EBS (Electronic Braking System) with EBS socket at the front, without connection cable, EBS 2S/2M, test connection for brake cylinder pressure routed externally at the EBS module. Note: The trailer may only be towed by vehicles that ensure ABS functionality! With raise & lower valve, control unit + brakes integrated into the frame as in semi-trailer tippers, installed in front of the axles Brake pad wear indicator for disc brakes via ABS/EBS lamp on truck 385/65 R22.5 Continental brand, steel rims, factory silver 24 Volt, multi-chamber lamps, yellow LED side lighting as on semi-trailer tippers, required overall width 3000 mm, 2 white LED position lights at the front, supplied loose, 2 white/red lane marker lights at the rear, 2 x 7-pin fail-safe sockets at the front, without connection cable Germany, type approval according to EC 2007/46 for complete vehicle, 24/7 service hotline, prepared for double single-line license plate holder, one plastic and one stainless steel interchangeable holder Warning panel according to ECE-70, aluminium, loose, EBS, safe parking, without contour marking / reflective stripes to ECE R 048, Frame: DB 7350 Novagrau, landing legs: black coated Immediately available!

Stav: nový, číslo stroja/vozidla: e7fbe178b85a202cade7e95af, pohotovostná hmotnosť: 5 kg, maximálna hmotnosť nákladu: 22 kg, celková hmotnosť: 29 kg, konfigurácia náprav: 2 nápravy, veľkosť pneumatiky: 235 / 75 r 17,5, More information Chassis: semi-trailer for freight forwarding Fine-grained steel welded construction, fifth wheel plate with interchangeable 2" kingpin, with 2 kingpin positions Outer frame slightly inclined with Load-Lock profile for attaching tie-down straps Note: To hook in the straps in combination with side walls, the side walls must be opened! 2 pairs of lashing rings recessed in the outer frame on the gooseneck, each rated 5 t 8 pairs of lashing rings recessed in the outer frame in the low-bed area, each rated 5 t 24 t 2-speed landing gear, single-side operation, with straight lower part, without compensating ram 2 wheel chocks with holder Side underride guard aluminium Rear underride protection steel Quarter shell mudguards in front of and behind axle assembly 2 stainless steel toolboxes, w=600/h=400/d=500 mm, with polished door, lockable 2 pairs of stake pockets recessed in the outer frame on the gooseneck, 70 x 40 mm internal dimensions 6 pairs of stake pockets recessed in the outer frame in the low-bed area, 70 x 40 mm internal dimensions Note: Internal width between stakes 2420 mm! 3 pieces of lashing/stake rails in the low-bed, cross-wise fitted in the floor across the entire width to the outer frame (max. usable internal width between external drop-in stakes approx. 2170 mm), height approx. 100 mm. With 20 mm round steel bars, above and below, distance from top to bottom approx. 60 mm (of the round steel). At the bottom with angle plate as termination, half open downward. For lashing and fitting stakes 80 x 80 mm. Number of drop-in stakes W=80/D=50/L=1200 mm, hot-dip galvanized Number of drop-in stakes W=80/D=80/L=1200 mm, hot-dip galvanized Note: Stake pockets/drop-in stakes are not designed for the sole securing of long material, pipes, etc. without wrapping/strapping Rear mechanical extension with hand crank, extendable by approx. 1,500 mm, can be locked every 500 mm, with support beam, loadable at the center of gravity over the entire width: at 500 mm extension with 2,000 kg, at 1,000 mm with 1,000 kg, and at 1,500 mm with 500 kg; including extendable rear underride protection with lighting 2 pairs of drop-in stakes W=80/D=80/L=1200 mm, hot-dip galvanized Open storage compartment for drop-in stakes at the front wall or below the loading platform (for 10 stakes 80 x 50 x 1200 mm and 4 stakes 80 x 80 x 1200 mm) Axles + Suspension SAF drum brake axles Axles / chassis laser-measured, reduces tire wear and fuel consumption Last axle steered, with automatic reverse lock via backup light, and additional manual locking function on the vehicle via push button Air suspension with raise/lower valve Wheels and Tires 235 / 75 R 17.5 Manufacturer’s choice Steel rims in twin arrangement, painted factory silver Brake System 2-line compressed air brake system Spring-actuated parking brake 2 secure-type coupling heads at front, without connecting line EBS, electronic braking system with EBS socket at front, without connection cable Attention: The trailer may only be towed by towing vehicles that ensure the functionality of ABS! Axle load detection via EBS CAN bus signal, for display in the driver’s cab; the truck must be appropriately prepared, not for retrofit (not a certified scale) Electrics Ljdpsi Ri Hvefx Alceab 24 volts, multi-chamber lights, side yellow LED marker lights 2 white position lights at front 2 white/red marker lights at rear 2 x 7-pin sockets at the front, without connecting cable 2 additional LED work lights at the rear, switched via rever

Stav: nový, číslo stroja/vozidla: f79a9f15e7131d57a512793ab, pohotovostná hmotnosť: 8 900 kg, maximálna hmotnosť nákladu: 15 100 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, veľkosť pneumatiky: 235 / 75 r 17,5, Further Information Chassis Low-loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holder Side underrun protection made of aluminium Full-width rear spray flap Quarter fenders in front of the 1st axle Telescopic widenings extendable to 3,000 mm (not in the rear bevel area) (The track width of the construction machines or vehicles to be transported must not exceed the exterior frame width of 2,550 mm) Storage compartment for timber planks in the centre of the loading area 70 mm timber planks for widening to 3,000 mm Lashing points low-loader 1 pair of lashing eyes on the gooseneck, each rated at 5 tonnes 9 pairs of lashing mushrooms recessed at the top and side in the outer frame, each rated at 10 tonnes 2 at the front on the gooseneck 7 in the lower bed Lajdoi Ri Izspfx Alcsb 6 pairs of lashing holes in the outer frame of the lower bed, each rated at 5 tonnes (for attaching ratchet straps) Drawbar turntable trailer Drawbar with certified 50 mm towing eye Axles & Suspension SAF drum brake axles Axles/chassis laser-aligned to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical system included Axle load equalisation front and rear (rocker balancing) Wheels and Tyres 235 / 75 R 17.5, manufacturer’s choice Steel rims in twin-mount configuration, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front with connection lines to the tractor unit ABS and ALB, with ABS plug at the front and connection cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, lateral yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 1 LED beacon with bracket, operated via parking lights (removable beacon) 2 pairs of warning boards, double LED-illuminated and extendable up to 3,000 mm 2 x 7-pin non-interchangeable plugs at the front, with connection cable Floor Gooseneck with steel/chequer plate covering Followed by 70 mm softwood floor, steel/chequer plate covering in wheel arch area Rear bevel with 70 mm softwood floor Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable With timber overlay Hydraulically operated via tractor’s PTO with flow control, operated laterally FR left Hydraulic connection with SVK plug NW 10/3 incl. connecting hose Operating notes An exemption permit is required for a 10,000 kg axle load, only indivisible loads permitted! The stated total weight is technically possible, depending on the cargo, the total weight may not be achievable in compliance with the permissible axle, support and kingpin loads (poor driving and trailing characteristics due to incorrect load distribution possible) Country of registration/Plates Country of registration: Germany With Dekra inspection and certificate (per §13 EC-FGV) 24/7 service hotline included Prepared for double-line number plate holders Outline marking with reflective strips per ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Nova Grey 10-year guarantee against rust-through Drawbar galvanised or black, manufacturer’s choice Ramps hot-dip galvanised

Stav: nový, číslo stroja/vozidla: d9c951d746f03c05bc5470f89, pohotovostná hmotnosť: 5 kg, maximálna hmotnosť nákladu: 29 045 kg, celková hmotnosť: 35 kg, konfigurácia náprav: 3 nápravy, veľkosť pneumatiky: 385/65 r22.5, Further information Chassis Semi-trailer for forwarding operations Fine-grain steel welded construction, fifth wheel plate with interchangeable 2-inch kingpin Vario stanchion system 4 pairs recessed into the loading platform, telescopic, can be collapsed to 2,100 mm and extended to approx. 3,500 mm for loading. Stanchions lockable at any inner width from 2,100 mm to 3,000 mm in 100 mm increments; 4 pairs of divisible stanchions (600 mm + 1,200 mm), total height 1,800 mm, removable. For an inner stanchion width from approx. 2,350 mm, oversize width. Vario front walls Floor prepared for the insertion of 3 front walls. 4 x 5 pairs of vario stanchion pockets for insertable front walls (front and rear), and 1 x 3 pairs each centrally for rebar mesh transport of 2 x 5,000 mm or 2 x 6,000 mm 2 Vario front walls, each consisting of 1 pair of plug-in stanchions and 1 cross beam at the top, approx. 2,200 mm wide. Cross beams extendable by 220 mm on both sides, with lashing hole for securing. Vario front wall height approx. 1,900 mm, convertible to a height of 1,300 mm or 700 mm. 4 central stanchion pockets recessed into the floor for 80 x 80 mm plug-in stanchions 1 pair of lower supports for front Vario front wall 1 pair of lower supports for rear Vario front wall Exterior frame slightly sloped with load-lock profile for lashing strap attachment 14 additional pairs of lashing rings recessed into the outer frame, 5 t each 24 t two-speed landing gear, single-side operation, with straight base, without load compensator Laedpfx Aoi Ri R Delcob Rear extension ladder Wheel chocks with holder Side underrun protection, aluminium Rear underrun protection, galvanized steel Quarter mudguards in front of and behind axle assembly With anti-spray mud flap only on last axle Rear impact protection 8 rebar winches with wire rope and counter hooks, 4 left and 4 right, with rope feed through the outer frame, 1 removable attachable gearbox for rebar winches—supplied loose (without frame bracket) 1 spare wheel carrier for 1 E-wheel with wheel fastening kit 1 plastic tool box with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (padlock not included) 1 closed stanchion storage box, open at the top, below the loading platform, doors on both sides, w=450 mm / h=400/420 mm / d=2460 mm 4 crosswise lashing/stanchion rails recessed into the floor across the entire width to the outer frame (max. usable inner width between external plug-in stanchions approx. 2,170 mm), approx. 100 mm high. With 20 mm round steel bars, top and bottom, distance from top to bottom approx. 60 mm (of the round steel). Lower edge completed by an angle plate, half open at the bottom. For lashing and inserting 80 x 80 mm stanchions. Note: Stanchion pockets/plug-in stanchions are not designed for load securing of long goods, pipes, etc. without wrapping around. Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser alignment—to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, activation by braking 3 times (starting aid operative up to 30% axle overload and up to a speed of max. 25 km/h) Axle lift below recommended ride height, therefore no guarantee for tire damage Brake system 2-line compressed air brake system Color-coded line routing for easy service. Spring-loaded parking brake 2 non-interchangeable coupling heads at front, without connector line EBS, electronic braking system with EBS socket at

Stav: nový, číslo stroja/vozidla: 357314e4e176f8758d11ba42b, pohotovostná hmotnosť: 4 500 kg, maximálna hmotnosť nákladu: 30 500 kg, celková hmotnosť: 35 000 kg, konfigurácia náprav: 3 nápravy, veľkosť pneumatiky: 385/65 r22.5, Further information Chassis Semi trailer tipper Fine-grain steel welded construction, lightweight design, kingpin plate with exchangeable 2-inch kingpin. Patented curved front bulkhead Central telescopic landing leg, unhitching when loaded not possible, when uncoupled the vehicle must be positioned with a rearward incline. 2 wheel chocks with holder Folding underrun protection Half-shell mudguards Integrated mudguard holder with stone-repellent surface Splash guard only on rearmost axle 1 tarpaulin support rod with holder 2 rear towing hooks Axles and suspension SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis, reduction in tire wear and fuel consumption Axles in off-road version Air suspension 1st axle automatic lift axle, incl. forced lowering and traction aid, activated by braking 3 times (traction aid operates up to 30% axle overload and up to max. 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against corrosion Brake system 2-line compressed air brake system, color-coded line layout for easy servicing Spring-loaded parking brake 2 foolproof coupling heads at the front, without connection lines EBS (Electronic Braking System) with EBS socket at the front, without connecting cable Note: The trailer must only be towed by vehicles that ensure the effectiveness of the ABS! With raise and lower valve Vehicle driving stability system Automatic tip lowering with shut-off valve Wheels and tires 385/65 R22.5, make at manufacturer's discretion Steel rims painted silver Electrics 24 Volt, multi-chamber rear lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin foolproof sockets at the front, without connection cables Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck PTO Bodies Aluminium box body made from high-quality, abrasion-resistant grade, front wall 5 mm thick, with external end walls made from 30 mm hollow-chamber profiles, cleanly welded, with bulk material repellent upper rail profiles. Interior with access at the front wall (not suitable with Cramaro cover). Shovel and broom holder outside on front wall. Ledpfx Alsi Ri R Ieceab Greenline – conical and aerodynamic body shape Membrane tailgate Tailgate as swinging flap with double-joint hinge, external mounting with dual hook locking. Tailgate with rubber seal, Note! Heat-resistant up to max. 170°C! Floor continuous 6 mm thick Standing platform with access, connection plate for air/electricity and brake with large clearance for optimum operability. Roll tarpaulin stowable to the right, with central locking to the left Operating instructions For transportation of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent material corrosion and rust. The specified total weight is technically possible, but may not be achieved depending on the cargo, due to observed permissible axle/support/kingpin loads. (Poor driving and trailing behavior possible with incorrect load distribution) Country of registration/plates Germany Approval according to EC 2007/46 24/7 Service Hotline Prepared for single-line number plate holder Conspicuity markings with reflective tape according to ECE R 048, white on sides and red on rear

Stav: nový, číslo stroja/vozidla: 59ade5d1599dcdee29033ac46, pohotovostná hmotnosť: 6 350 kg, maximálna hmotnosť nákladu: 28 650 kg, celková hmotnosť: 35 000 kg, konfigurácia náprav: 3 nápravy, veľkosť pneumatiky: 435/50 r19,5, Further information Chassis semi-trailer forwarder Fine-grained steel welded structure, fifth wheel plate with exchangeable 2'' kingpin Full-width insert strip for aluminum ramps Frame in reinforced design for vehicle loading (up to outer frame) Outer frame with load-lock profile approx. every 400 mm for lashing strap attachment 10 pairs of recessed lashing mushrooms on the top/outside of the outer frame, each rated at 10 t 24 t two-speed landing gear with single-side operation, semi-circular lower part and straight mounting plate, with thrust compensation Foldable rear support 2 wheel chocks with holders Side underrun protection aluminum Underrun guard galvanized steel Quarter shell mudguards in front of 1st axle and behind each axle With anti-spray mud flaps behind each axle Pair of ferry lashing rings, yellow marked 1 spare wheel holder for 1 spare wheel, including wheel fastening kit 2 plastic toolboxes with drawer and shelf, w=650 / h=520 / d=670 mm, can be locked with padlock (padlock not included) Container locks, 4 pairs recessed in floor for 2 x 20 ft or 1 x 40 ft container, frontmost position as recessed folding lock 10 pairs of stake pockets recessed in the outer frame, 70 x 40 mm internal dimension 10 stake pockets centrally recessed in the floor, 70 x 40 mm internal dimension 2 cross lashing/stake rails recessed in the floor across the entire width up to the outer frame (max. usable internal width between the outer stakes approx. 2170 mm), approx. 100 mm high. With 20 mm round steel rails, top and bottom, spacing between rails approx. 60 mm. Lower end with angle iron, open halfway down. For lashing and inserting stakes 80 x 80 (order: position 2 and 4 as per Fliegl data sheet) 20 plug-in stakes, hot-dip galvanized Note: Stake pockets/plug-in stakes are not designed for sole load securing of long goods, pipes, etc. without lashing Storage space for aluminum drive-on ramps, ramps can be inserted from the rear 3 pairs of fold-down lashing rings 10 t in the outer frame (1x in front of front wall and 2x in rear section). Axles + Suspension SAF disc brake axles Axles/chassis laser alignment reduces tire wear and fuel consumption Lasdpfjld Ihlsx Alcsb Air suspension 1st axle automatic lift axle, including forced lowering and start-off aid, activated by 3 x braking (start-off aid is functional up to an axle overload of 30% and up to a maximum speed of 25 km/h) Axle lift below recommended driving height – no warranty for tire damage 2 driving heights, adjustable via manual knob, 1 x for coupling height 980 mm, 1 x for coupling height 1100 mm (note: vehicle with inclined position) Brake system 2-line compressed air brake system Color-coded line routing for easy service Spring-loaded parking brake 2 mix-up-proof coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connection cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of ABS! With lift and lower valve 2 driving heights, adjustable via manual knob, 1 x for coupling height 980 mm, 1 x for coupling height 1100 mm (note: observe total height, excess height at customer's risk) Driving height in combination with lift axle: with raised lift axle, loading or total height increases by 50 mm (on Mega Flex only at low driving or coupling height) Vehicle stability control system Wheels and tires 435/50 R19.5, make at manufacturer's discretion Steel rims, factory silver, Electrical...

Stav: použitý, Funkcionalita: plne funkčný, číslo stroja/vozidla: WFDFLT33902028370, pohotovostná hmotnosť: 6 015 kg, maximálna hmotnosť nákladu: 28 985 kg, celková hmotnosť: 35 000 kg, konfigurácia náprav: 3 nápravy, povolené zaťaženie nápravy (náprava 1): 9 000 kg, dovolené zaťaženie nápravy (náprava 2): 9 000 kg, povolené zaťaženie nápravy (náprava 3): 9 000 kg, prvá registrácia: 04/2021, ďalšia kontrola (TÜV): 10/2026, dĺžka ložného priestoru: 13 650 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 3 000 mm, celková dĺžka: 13 850 mm, celková šírka: 2 550 mm, celková výška: 4 030 mm, zavesenie: vzduch, veľkosť pneumatiky: 435/50 R19,5", farba: čierny, Rok výroby: 2021, Výbava: EBS (Elektronický brzdový systém), Chassis Semi-Trailer for Freight Forwarding Fine-grained steel welded construction, saddle plate with replaceable 2" kingpin Outer frame slightly inclined with "Load-Lock profile" for lashing strap attachment, if present on the frame. Note: To hook in straps in conjunction with sideboards, the sideboards must be opened! 24 t, 2-speed landing gear with single-sided operation, straight bottom section, without cross-brace compensation Note: Free landing leg corner dimension or free rear swing radius approx. 1930 mm, without landing legs, rear pull-out ladder, side door retainers 2x wheel chocks with holders Side underrun protection made from aluminum Rear underrun guard made from galvanized steel Quarter-shell mudguards in front of the 1st axle and behind each axle With anti-spray mud flaps behind each axle Lodox Sqmropfx Alcoab Rear impact guard, dual-sided pallet stops approx. 15–20 mm high, bolted version, loading height reduced by approx. 15–20 mm Plastic toolbox with drawer and removable shelf, W=650 / H=520 / D=670 mm, lockable with a padlock (lock not included) Axles & Suspension SAF disc brake axles "Axles/chassis laser-measured" reduces tire wear and fuel consumption, air suspension, without lift axle Brake System 2-line compressed air brake system with color-coded line routing for easy service Spring-loaded parking brake 2 interlock-proof coupling heads at the front, without connecting line EBS electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that ensure proper ABS function! With raise/lower valve Vehicle Dynamic Stability System Wheels and Tires 435/50 R19.5" brand as selected by manufacturer or alternatively 385/55 R19.5 Steel wheels, factory silver Electrics 24 Volt, multi-chamber lights, yellow LED side marking lights 2 white position lamps at front 2 white/red lane marker lamps at rear 2 x 7-pin and 1 x 15-pin interlock-proof sockets at the front, without connecting cable Floor Film-faced plywood, approx. 30 mm thick, laid over longitudinal cross-members for high point load tolerance, suitable for forklift axle load up to max. 7100 kg Superstructure Mounted superstructure Front wall / front corner posts 2,580 mm high, corner posts made of steel in volume design, unlocking device for side curtain at front panel "Crash blocker" steel rear impact guard approx. 140 mm high on the inner lower area Center stanchions 3 pairs of sliding stanchions, repositionable along the entire length, with quadruple pocket positions and long pocket at the base 3 pairs of stanchion positions Plug-in slats 5 rows wooden plug-in slats Rear wall / rear corner posts Rear corner posts made from steel up to the lower edge of the roof, curtain attachment with round tube and tension ratchet Double-wing rear portal doors, each with 2 internal locking rods Curtain Tarp with integrated horizontal and vertical belts Stainless steel tension fasteners Roof Sliding roof, rear end lift can be folded up, roof can be slid from rear to front, L-roof girder for automotive industry, internal width between roof girders approx. 2,490 mm, tarp color: white Non-elastic roof, minimal deflection of roof girder during loading/unloading EcoLift - roof can be raised approx. 380 mm bilaterally, with gas strut support, 3 settings in front: internal height in front approx. 2,900 mm / 2,950 mm / 3,000 mm (pre-set to approx. 3,000 mm) Optimized rain gutter at the rear, mounted on the rear crossmember, above the doors

Stav: dobrý (použitý), Použitý v dobrom stave 4 kusy na sklade Lodpfsvt Szzjx Alcoab

Stav: použitý, číslo stroja/vozidla: WFDFLT23861001990, pohotovostná hmotnosť: 4 900 kg, maximálna hmotnosť nákladu: 33 100 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, celková dĺžka: 9 800 mm, celková šírka: 2 550 mm, veľkosť pneumatiky: 265/70 r19,5, farba: červená, Ďalšie informácie bývalé výstavné vozidlo z roku 2006 – bolo používané interne, preto vykazuje známky používania! Bočná ochrana proti nárazu: hliník, od kráľovského čapu po začiatok bočnej ochrany 2 600 mm Ochrana proti podjazdu: v rámovej farbe a zapustená zarovno s koncom podvozku, čo najviac dovnútra Kliny pod kolesá: 2 kusy s držiakom Ledpfx Aji Ri Hyslcsab Nárazové pufre: 2 kusy oceľových pufrov Lak: podklad pieskovaný, dvojzložkový akrylový lak Disky: továrenská strieborná Kontrola: so schválením DEKRA

Stav: použitý, Funkcionalita: plne funkčný, číslo stroja/vozidla: WFDFLT34002026856, pohotovostná hmotnosť: 5 592 kg, maximálna hmotnosť nákladu: 29 408 kg, celková hmotnosť: 35 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 05/2020, celková dĺžka: 13 850 mm, celková šírka: 2 550 mm, celková výška: 2 080 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R22,5", farba: biely, Rok výroby: 2020, Chassis, semi-trailer for freight forwarding Fine-grain steel welded construction in reinforced Scandic design, fifth wheel plate with interchangeable 2" king pin Outer frame slightly angled with “Load-Lock profile” for securing lashing straps Note: To hook in the straps in combination with drop sides, the side panels must be opened first! Lashing rings for insertion in the “Load-Lock profile”, each rated for 6 t, delivered loose 24 t two-speed landing gear, single-sided operation, with straight lower section, without compensating bar Free swing radius to landing leg approx. 2,200 mm, landing leg separation approx. 2,350 mm 2 wheel chocks with holders Side underrun protection, aluminium Rear underrun protection, hot-dip galvanized steel Quarter mudguards before and after axle assembly Anti-spray mudflap only on the last axle 1 plastic toolbox with drawer and removable shelf, dimensions w=650 / h=520 / d=670 mm, lockable with a padlock (padlock not included) 1 pair of stake pockets recessed at the very front of the outer frame/floor, 83 x 83 mm internal dimensions 2 plug-in stakes B=80/T=80/L=1200 mm, hot-dip galvanized Note: Stake pockets/pluggable stakes are not designed for the sole securing of long goods, pipes, etc., without lashing 4 pairs of ferry lashing rings, marked yellow Axles & Suspension 3x BPW drum brake axles "Axles/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting lines EBS from Wabco Premium, electronic braking system with EBS socket at the front (without connecting cable), Wabco Premium including open CAN BUS for telematics Attention: The trailer may only be towed by tractors that ensure ABS effectiveness! With raise & lower valve Vehicle stability control system Electrics 24 Volt, LED multi-chamber lights with resistor, side yellow LED lighting, LED license plate lighting (Note: For certain towing vehicles, incorrect diagnostics may appear although operational) 2 white position lights at the front 2 white/red lane assist lamps at the rear 2 x 7-pin fail-safe sockets at the front, without connecting cables Front bulkhead / front corner posts 2 x 580 mm high, steel corner posts in volume design, release for side curtain at bulkhead “Crash-Blocker”, steel impact guard inside approx. 140 mm above floor Insertable boards Rows of timber insert boards Curtain Curtain with welded horizontal and vertical reinforcing belts Tension locks made of stainless steel Floor Phenolic plywood, approx. 30 mm thick, on longitudinal bearers for high point load capacity, suitable for forklift axle load up to max. 7,100 kg Note: Warping of floor due to weather influences is possible (no warranty)! Rear panel / rear corner posts Rear corner posts steel up to lower edge of roof, curtain with round tube and ratchet tensioner Rear portal doors, double-wing with 2 internal locking bars each Roof Sliding roof, rear end liftable, curtain mobile from rear to front, curtain color: white Optimized rain gutter at the rear, on the top end rail, above the doors Registration country/ Plates Germany Type approval according to EC 2007/46 Ljdsx Rq Slopfx Alcoab 24/7 service hotline Prepared for single-line license plate holder Conspicuity marking with reflective tape according to ECE R 048, white on sides and red at rear