Klink Stroj kúpiť použité (89 665)

Stav: dobrý (použitý), Rok výroby: 1980, Info: The machine was installed in a pit! Podpfsxr Aw Tox Ah Tsgu - Pulling force: max. 25,000 kg - Clearing stroke: max. 630 mm - Clearing speed: 1 - 10 m/min - Return speed: 7 - 25 m/min - Total connected load: 45 kW - Machine weight: 5,500 kg

Stav: použitý, Rok výroby: 1999, pre kutilov áno Stav neznámy Pgjdpfew Sybqjx Ah Tou Dĺžka ťahu: . mm

Rok výroby: 1983, Stav: veľmi dobrý (použitý), číslo stroja/vozidla: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of Manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition. Pulling force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head holder diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Psdpfx Ahed Nb A Nj Tsgu Cutting speed: hydraulically variable from 1 m/min up to max. 10 m/min Return speed: hydraulically variable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit bottom) Power supply / connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Features: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-actuated draw heads according to DIN 1417/18 for locking the broaching tools in the pull bridge. The needle lifter heads in the tool feeder are hydraulically locked. The machine is fitted with a coolant system featuring an integrated magnetic belt chip conveyor for pit installation. Remarks: The machine is in very good condition and still has its original paint. It is designed for use in series production; for optimal utilization, installation in a foundation pit is recommended. Draw heads and needle lifters are available on request. The machine can be inspected in our warehouse.

Stav: veľmi dobrý (použitý), Rok výroby: 2000, Typ stroja: horizontálne vnútorné ťahacie obrábacie zariadenie (broach) Výrobca: Arthur Klink Model: RISH 6.3 × 1000 × 400 Pgedpfxsk S U Hcs Ah Tju Rok výroby: 2000 Ťahová (broachovacia) sila: 6,3 tony (cca 63 kN) Maximálna dĺžka ťahania (zdvih): 1 000 mm Maximálny priemer obrobku: cca 420 mm Priemer otvoru pracovného stola: cca 80 mm Rýchlosť ťahania: hydraulicky plynulo nastaviteľná od 1 m/min do 7 m/min Rýchlosť spätného chodu: hydraulicky plynulo nastaviteľná od 7 m/min do 25 m/min Celkové rozmery (šírka × hĺbka × výška): cca 5 700 × 600 × 1 900 mm Napájanie: 380 V, 50 Hz, celkový príkon cca 4 kW Hmotnosť stroja: cca 2 300 kg Chladiaci a mazací systém: integrované zariadenie na prívod chladiacej a mazacej kvapaliny Dĺžka vane na olej a triesky: cca 2 000 mm

Stav: použitý, TECHNICAL DATA - Pulling force: 80 kN - Max. broaching stroke: 1250 mm - Max. feed travel: 500 mm - Spindle lengths: 650 - 1400 mm - Table width: 400 mm - Broaching speed: 1 - 10 m/min Pjdpou E U R Tefx Ah Tsgu - Return stroke speed: 1 - 15 m/min - Installed power: 25 kW - Machine weight: 4300 kg

Stav: použitý, Funkcionalita: plne funkčný, Rok výroby: 2000, Použitý vnútorný obrážací stroj Pgjdpfetpmnrsx Ah Teu Výrobca: Arthur Klink Typ: RISH 10x1000x400 Rok výroby: 2000

Stav: dobrý (použitý), Rok výroby: 2004, - Ťahová sila: max. 160 kN - Zdvíhací zdvih: max. 1000 mm - Prísunový zdvih nástroja: max. 630 mm Pgedpfx Ahsxr Aw Hj Tsu - Šírka stolovej dosky: 630 mm - Rýchlosť obrábania: 10 m/min - Rýchlosť spätného chodu: 23 m/min - Inštalovaný výkon: max. 88 kW - Hmotnosť stroja: 12 410 kg

Rok výroby: 1965, Stav: použitý, číslo stroja/vozidla: 2112, Farba: zelená Ťažná sila: 2,5 t Zdvih: 1000 mm Hmotnosť: 1,2 t Pgodpfxsbrclvs Ah Tou 3 kW Plocha základne: cca 140 x 130 cm

Rok výroby: 1962, Stav: dobrý (použitý), číslo stroja/vozidla: 1886, used vertical hydraulic internal broaching machine with 3 broaching stations Pulling force: 10,000 kg Broaching length: 1,200 mm Broaching stations: 3 units Distance between broaching stations: 380 mm Chuck diameter for drawing heads: 3 x Ø ___mm Passage width between the cylinders: max. XXX mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely variable from 7 up to max. 25 m/min Machine footprint (W x D x H): approx. 1,300 x 1,450 x 3,350 mm (without pit) Power supply / connected load: 380 Volt 50 Hz / 8.0 kW Accessories / Special equipment: The machine is equipped with a workpiece table with 3 bores for 3 broaching positions. The tool clamping system is designed for spring-mechanical locking in both the pulling bridge and the feed device. The machine has an integrated coolant system. Remarks: The machine is designed for use in series production; for optimal utilization, a foundation (pit) is ideally required or alternatively a platform. Drawing heads and needle lifters are available upon request. The machine can be inspected at our warehouse. Pjdpfot Dwb Djx Ah Togu

Stav: veľmi dobrý (použitý), Rok výroby: 2000, číslo stroja/vozidla: 03.2456, CNC vnútorný obrážač Pjdpfoirwiqsx Ah Tsgu Arthur Klink RISH 6.3X1000X400 Repasované v roku 2016

Rok výroby: 1984, Stav: použitý, číslo stroja/vozidla: 16700, Farba: biela S magnetickým podávaním plechov, automatickým podávačom, Ťahová sila: 10 t Zdvih: 1200 mm Hmotnosť: 6 t Pgsdpfxobrclqo Ah Tsu Pôdorys: cca 160 x 140 cm

Rok výroby: 1993, Stav: dobrý (použitý), číslo stroja/vozidla: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Pgsdpfx Aocc D Ddjh Teu Weight: 6,500 kg (total) Machine No.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeding for 2 workpieces, in good condition Pulling force: 10,000 kg Broaching length: 1,000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head mount diameter: 3 x Ø 80 mm Clearance between cylinders: max. 435 mm Cutting speed: hydraulically adjustable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically adjustable from 5 up to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Power supply / Connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Features: The machine is equipped with a workpiece table and a pull bridge for 3 broaching stations. Furthermore, it features an automatic workpiece feeding system for 2 workpieces. Clamping of shank and end piece holders is hydraulic. The machine has a coolant system with an integrated magnetic chip conveyor for use without a special foundation (pit). Remarks: This machine is designed for large series production. It is in very good condition, still in its original paint. The machine is powered and available for inspection at our warehouse.

Rok výroby: 2000, Stav: použitý, číslo stroja/vozidla: 3167, Rovinná sila: 16 t Pgodpfxeccxqte Ah Tou Zdvih: 1600 mm Hmotnosť: 8,5 t

Stav: použitý, Rok výroby: 1990, číslo stroja/vozidla: 3048 & 3047, Manufacturer: Karl Klink Model: RKW 25-3800-520 Weight: 50t Year of manufacture: 1990 Machine No.: 3048 & 3047 General / Technical Data: Chain broaching machine for continuous external broaching Tensile force: 25,000 kg Podpfx Ajinim Tjh Togu Cutting speed: 7.2 / 8.1 / 9.6 m/min Maximum tool length: 3520 mm Passage width: 520 mm Clamping surface of the tool carrier: 3520 x 460 mm Dimensions: 12,300 x 6,400 x 4,650 mm Power supply: 380V 50Hz / 110kW Accessories / Special Equipment: - 6 tool carriers for tool change - Machine documentation Remarks / General Information: The machines are in good condition. The machines are dismantled and stored in our warehouse. The total volume of the system requires several trucks (approx. 70t per machine). The machines were used to produce connecting rods for passenger car diesel engines. Chain broaching machines are designed for use in mass production. The continuous (non-return) operating process in chain broaching is designed for maximum achievable productivity in external broaching. The chain broaching process is the only broaching process without a return stroke of the tools or workpieces. In chain broaching, the workpiece is continuously guided past the tool, thus creating the feed movement. This unique broaching process is only used for very large batch sizes in series production.

Stav: použitý, Rok výroby: 1990, max.: ťahová sila 25 000 kg max.: dĺžka nástroja 3 520 mm max.: rýchlosť rezu 9,6 m/min Pgedpfxecm Eiwo Ah Tou priechodná šírka: 520 mm Stroj obrábal ojnice a viečka ojníc. Stroj je navrhnutý na sériovú výrobu (výkon: 400 kusov/hod.)

Stav: použitý, Funkcionalita: plne funkčný, Rok výroby: 1966, celková hmotnosť: 7 000 kg, vstupné napätie: 380 V, dĺžka protahovania: 1 500 mm, počet broachovacích poloh: 3, priemer obrobku (max.): 575 mm, celková výška: 5 100 mm, Manufacturer: Karl Klink Model: RSI 20x1500 Year of manufacture: 1966 Weight: approx. 6,700 kg Machine no.: 2455 General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations Pulling force: 20,000 kg Broaching stroke: 1,500 mm Broaching stations: 3 units Distance between broaching stations: 2 x 145 mm Pull head mounting diameter: 3 x Ø 85 mm Clearance between columns: max. 580 mm Cutting speed: hydraulically infinitely adjustable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely adjustable from 7 up to max. 25 m/min Machine footprint (W x D x H): approx. 1,500 x 2,100 x 4,600 mm (max. 5,100 mm height with tool feeder in raised position) Power supply / connection load: 380 Volt 50 Hz / 14 kW Accessories / Special Features: The machine is equipped with a worktable featuring 3 bores for 3 broaching stations. The tool clamping system is designed for spring-actuated locking in the pull bridge and the feeder. The machine features an integrated coolant system. Pedowql Rvopfx Ah Togu Remarks: The machine is designed for series production; for optimal use, ideally a foundation (pit) is required, or alternatively a platform. Pull heads and ejector needles are available on request. The machine can be inspected under power at our warehouse. General Information: We consistently stock a wide range of approximately 80 used broaching machines with pulling forces from 3,000 kg to 63,000 kg, both horizontal and vertical models. Many of the broaching machines in stock are ready for demonstration. If required, we can also offer used equipment such as pull heads, ejector needles, broaching tools, and other specific accessories. As a contract broaching company with over 50 years of experience, we are also able to assist you with technical questions regarding broaching technology.

Rok výroby: 1965, Stav: dobrý (použitý), Funkcionalita: plne funkčný, číslo stroja/vozidla: 2549, General / Technical Data: Used horizontal hydraulic internal broaching machine in age-appropriate good condition with heavy-duty manual tool feeder. Broaching stroke: 2,000 mm Pulling force: 25,000 kg (250 kN) Acceptance in the pull bridge: Ø 105 mm cylindrical Pass-through bore in clamping table: Ø 125 mm Clamping surface (workpiece area): 440 mm x 440 mm Workpiece diameter: max. approx. 800 mm (limited by the tool tray of the tool feeder) Cutting speed: hydraulically steplessly adjustable from 1.5 m/min to 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to 25 m/min Oil capacity: Hydraulic approx. 450 L / Coolant approx. 100 L Machine footprint (W x D x H): approx. 8,400 mm x 1,350 mm x 1,800 mm (without work area) Power supply: 380 Volt 50 Hz Connected load: 19 kW Equipment: • The machine features a mechanical-hydraulic control for broaching and return stroke • The machine includes an integrated coolant and cutting fluid system • The machine is equipped with a manually operated tool feeder • The broaching slide with draw head mount is guided flat on both sides • The machine is fitted with adjustable pull force limitation • Pull force display Accessories: • 1 universal draw head for flat shanks up to max. approx. 40 mm width • Indexing device (see pictures) • Various special arbors and clamping devices Psdpfxetuuvzj Ah Tegu • Machine documentation Remarks: The machine is designed for manufacturing keyways using flat broaching tools as well as for profile broaching. Due to the machine bed and the robust broaching tool feeder, it is very well suited for heavy-duty profile broaching tools. The machine is used and in condition appropriate to its age. The machine is available for inspection at our warehouse. It is newly added to our stock and has not yet been refurbished technically or visually. Draw heads for profile broaching are available upon request, depending on DIN standard, dimension, and stock availability.

Rok výroby: 1990, Stav: veľmi dobrý (použitý), Výrobca: Arthur Klink Rok výroby: 1990 Model: RISZ 16 x 1250 x 400 / HG Technické údaje: Vertikálny vnútorný vystrihovací stroj v technicky veľmi dobrom stave Ťažná sila: 16 000 kg Rýchlosť vystrihovania: plynulo nastaviteľná až do 27,5 m/min Rýchlosť spätného chodu: plynulo nastaviteľná až do 34 m/min Maximálny zdvih: 1250 mm Počet pracovísk: 4 ks Príslušenstvo: - Automatický menič nástrojov - Automatické podávanie dielov (podľa typu dielov) - Hydraulické upínacie zariadenie na nástroje (podľa typu dielov) Poznámka: Pjdpjlpadyjfx Ah Tegu Vysokovýkonný vystrihovací stroj na hromadnú výrobu s vysokou reznou rýchlosťou!

Rok výroby: 1964, Stav: generálne opravený (použitý), číslo stroja/vozidla: 2041, Vertikálna vnútorná obrážacia stroj so spínacím kotúčom od firmy Karl Klink Pgedpfxogyd S Ds Ah Tsu Typ: RSI8DT1 Výrobné číslo: 2041 Rok výroby: 1964 Hmotnosť: 3,2 t Obrážacia sila: 8 000 kg So spínacím kotúčom (2 stanice) Napájanie: 380 V / 50 Hz Menovitý prúd: 25 A Príkon: 5,5 kW Stroj je kompletne repasovaný a preto sa nachádza vo veľmi dobrom stave.

Rok výroby: 1960, Stav: generálne opravený (použitý), číslo stroja/vozidla: 1732, Zvislo brokovacie zariadenie s prepínacím kotúčom značky Karl Klink Typ: RSI6DT Výrobné číslo: 1732 Rok výroby: 1960 Hmotnosť: 3,2 t Rámovacia sila: 6 000 kg Pedpfsgyd Svox Ah Togu S prepínacím kotúčom (2 stanice) Elektrické pripojenie: 380V / 50Hz Menovitý prúd: 15 A Pripojovací výkon: 4 kW Stroj je kompletne repasovaný a je preto vo veľmi dobrom stave.

Rok výroby: 1961, Stav: použitý, Všeobecné / technické údaje: Vertikálny duplexný vonkajší výhrabový stroj s dvoma stolmi Výrobca: Karl Klink Pjdpfx Aolwu Hrjh Tjgu Model: RSA 10 T/Zw. Rok výroby: 1961 Hmotnosť: cca 6 500 kg Ťahová sila: 10 t Rýchlosti výhrabu: 1 – 11 m/min Rýchlosti spätného chodu: 7 – 25 m/min Maximálny zdvih: na jednotku stroja 1 250 mm Upínacia plocha: 500 x 500 mm Priechodná šírka: 380 mm Elektrické napájanie: 380 V / 50 Hz Poznámka: Stroj je zapojený v našom sklade a je možné si ho prezrieť.

Rok výroby: 1964, Stav: dobrý (použitý), Funkcionalita: plne funkčný, číslo stroja/vozidla: 2016, used vertical hydraulic internal broaching machine with 3 broaching stations Tensile force: 16,000 kg Broaching length: 1,250 mm Number of broaching stations: 3 Distance between broaching stations: 380 mm Draw head mounting diameter: 3 x Ø ___mm Cutting speed: hydraulically adjustable, stepless from 1 m/min up to max. 7 m/min Return speed: hydraulically adjustable, stepless from 7 up to max. 25 m/min Machine dimensions (W x D x H): approx. 2,200 x 1,550 x 4,200 mm (without pit) Power supply / connected load: 380 Volt, 50 Hz Accessories / Special features: The machine is equipped with a workpiece table that has 3 boreholes for 3 broaching stations. The tool clamping system is designed as a spring-actuated locking mechanism in the drawbridge and as a hydraulic-mechanical system in the feed system. The machine was retrofitted electrically (Siemens S7 PLC) and mechanically in 2004. An integrated coolant system is included. Pgsdpfx Aet Dv I Ajh Tsu Remarks: The machine is designed for use in series production. For optimal utilization, it ideally requires a foundation pit or, alternatively, a platform. Draw heads and puller needles are available on request. The machine is available for inspection at our warehouse.

Rok výroby: 1960, Stav: generálne opravený (použitý), číslo stroja/vozidla: 1733, Vertikálna vnútorná protahovačka so spínacím tanierom od firmy Karl Klink Typ: RSI10DT Výrobné číslo: 1733 Rok výroby: 1960 Hmotnosť: 4,9 t Protahovacia sila: 10 000 kg Pgodogyd S Sspfx Ah Tou So spínacím tanierom (2 stanice) Elektrické napájanie: 380 V / 50 Hz Menovitý prúd: 35 A Príkon: 7,5 kW Stroj je kompletne renovovaný a nachádza sa vo veľmi dobrom stave.

Rok výroby: 1999, Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal broaching machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in like-new condition with tool lifter system, ideal for use with flat broaching tools. Broaching stroke: 1,600 mm Pulling force: 10,000 kg (100 kN) Mounting on drawbridge: Ø 85 mm cylindrical Pass-through bore in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by machine body/tool tray) Cutting speed: hydraulically stepless adjustable from 1.0 m/min to 9 m/min Return speed: hydraulically stepless adjustable from 1 m/min to 24 m/min Machine space requirements (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (excluding work area) Pgedpfer A Hcbex Ah Tju Power supply: 400 V, 50 Hz Connected load: 9 kW Equipment: • Machine features an electric control system for broaching movement with manual and automatic operation • Integrated coolant/lubricant system • Tool lifter system for flat broaching tools (no automatic feed) • Broaching slide with pull-head mount includes dual-sided flat guides Accessories: • 1 universal pull-head for flat shafts from 3 mm to max. 25 mm width and up to 10 kN (10,000 kg) pulling force • Complete machine documentation and CE declaration of conformity Remarks: Ideal machine for machining keyways. The combination of the rigid machine bed and the broaching tool lifter system makes it particularly suitable for quick and easy use of flat broaching tools. The machine has seen very little use and is in like-new condition. The machine is available for inspection at our warehouse and is powered up for demonstration. Our direct contact details and further information about the machine can be found in the attached PDF document.

Rok výroby: 1955, Stav: použitý, číslo stroja/vozidla: 1331, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1955 Weight: approx. 2950 kg Machine No.: 1331 General / Technical Data: Pgodpjdbr H Tjfx Ah Tju Hydraulic horizontal internal broaching machine in good, operational condition Broaching length: 1500 mm Number of broaching positions: 1 Pulling force: 10,000 kg at 3 m/min (5,000 kg at 7 m/min) Broaching tool clamping: Universal pull head for flat shanks up to 26 mm wide Through-hole in clamping table: Ø 100 mm Max. workpiece diameter: 420 mm (limited by the oil and chip tray) Cutting speed: Steplessly adjustable hydraulically from 1 m/min to 7 m/min Return speed: Steplessly adjustable hydraulically from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 6,200 mm x 700 mm x 1,900 mm (excluding working area) Power supply/connected load: 380 Volt 50 Hz / 8 kW Hydraulic motor: 7.5 kW Accessories / Special Equipment: • The machine is equipped with a universal pull head for flat tool shanks • The machine features a movable coolant/lubricant system for two media • The machine includes an oil and chip tray with a tool feeder carriage Remarks: The machine is ideal for the production of keyways and profiles. It runs smoothly and the guides and cylinder are very clean. Upon request, broaching needles and arbors can be supplied. The machine is connected, ready for demonstration and inspection at our warehouse.