Oemme kúpiť použité (2 151)
Zoradiť výsledky
- Najnižšia cena Najvyššia cena
- Najnovšie inzeráty Najstaršie inzeráty
- Najkratšia vzdialenosť Najväčšia vzdialenosť
- Najnovší rok výroby Najstarší rok výroby
- Najnovšia aktualizácia Najstaršia aktualizácia
- Výrobcovia od A po Z Výrobca od Z po A
- Relevancia
- Najnižšia cena
- Cena
- Najvyššia cena
- Cena
- Najnovšie inzeráty
- Dátum zverejnenia
- Najstaršie inzeráty
- Dátum zverejnenia
- Najkratšia vzdialenosť
- Vzdialenosť
- Najväčšia vzdialenosť
- Vzdialenosť
- Najnovší rok výroby
- Rok výroby
- Najstarší rok výroby
- Rok výroby
- Najnovšia aktualizácia
- Naposledy aktualizované
- Najstaršia aktualizácia
- Naposledy aktualizované
- Výrobcovia od A po Z
- Výrobca
- Výrobca od Z po A
- Výrobca
- Označenie od A po Z
- Označenie
- Označenie od Z po A
- Označenie
- Model od A po Z
- Model
- Model od Z do A
- Model
- Najnižšia referencia
- referencia
- Najvyššia referencia
- referencia
- Najkratšia doba prevádzky
- Prevádzková doba
- Najdlhšia doba prevádzky
- Prevádzková doba
- Relevancia
- Relevancia
Malý inzerát
Menslage
944 km
Cespedes, Anfara Sommer, remeselný pivovar Werk Sudhaus (2018)
Cespedes, AnfaraSudhaus
Volať
Stav: použitý, Rok výroby: 2018, Prehľad
Táto kompletná pivovarská a baliaca linka bola v roku 2018 vyrobená predovšetkým spoločnosťou Cespedes (Španielsko) a ďalšími európskymi výrobcami ako Anfara, Sommer a Braumanufaktur Werk. Zahŕňa varňu, fermentačné a servisné zariadenia, CIP a plniace linky, všetky vyrobené z nehrdzavejúcej ocele AISI 304. S kapacitou varne 1 500 litrov na dávku a tromi fermentačnými tankami s objemom 3 000 litrov je určená pre malé a stredne veľké pivovary. Zariadenie je vo výbornom stave a pripravené na okamžitú prevádzku.
Technické údaje
Výkon: 1 500 l na dávku (varňa), 3 × 3 000 l fermentačné tanky
Kfjdpfx Aow U Tgxjc Hsa
Formáty: Fľaše a plechovky (330 ml, 440 ml, 500 ml)
Varný systém: parou vyhrievaný, úplne z nerezovej ocele
Plnička: 6-hlavová poloautomatická izobarická plnička (fľaše), modulárna poloautomatická plnička a uzatvárač (plechovky, cca 150 ks/h)
Obsah dodávky
Varinová nádoba / vírivý tank | Cespedes | – | 2018 | 1 500 l užitočný objem, dvojplášťový, parné vyhrievanie, plne izolovaný, nerezová oceľ AISI 304
Rmutovací/cediaci kotol | Cespedes | – | 2018 | 2 000 l užitočný objem, motorizované miešadlo, izolácia, nerezová oceľ AISI 304
Nádrž na horúcu vodu (HLT) | Cespedes | – | 2018 | 3 000 l, izolovaná, s vyhrievacím plášťom
Fermentačné/tlmiace tanky (3 ks) | Cespedes | – | 2018 | každý 3 000 l použiteľný objem, tlaková nádoba do 3 barov, izolácia, chladiaci plášť
Riadiaca jednotka | Cespedes | – | 2018 | správa receptov, regulácia teploty, frekvenčný menič
Pracovná plošina s rebríkom | Cespedes | – | 2018 | nerezová oceľ, protišmyková, s madlom
Spojovacia lavica + potrubie | Cespedes | – | 2018 | nerezová oceľ, hygienické DIN ventily, vr. helikoidálneho čerpadla
Doskový výmenník tepla | – | UPF34/70 | – | nerezová oceľ, pre chladenie mladiny
Inline časticový filter | – | – | 2018 | nerezová oceľ AISI 304, štrbinová veľkosť 0,2 mm
Priezor | – | – | – | nerezová oceľ AISI 316, hygienické inline kontrolné okno
Parný generátor | Anfara | AV-300 | 2018 | 300 kg/h, 5 barov, olejový horák, CE certifikácia
CIP systém | – | CDXM 70-5 | 2021 | prietok 3,0–9,6 m³/h, motor 1,5 kW
Poloautomatická plnička fliaš | Cespedes | ISO-6 | 2016 | 6 plniacich hlavíc, izobarická, nerezová oceľ
Poloautomatická plnička plechoviek + uzavierací stroj | Braumanufaktur Werk | Fillmatic | 2021 | modulárna, formáty 330–500 ml, cca 150 ks/h
Šrotovník na slad | Sommer Maschinenbau | Maltman | 2019 | až 1 500 l šarže, 2-valcový mlyn
Pufrovací/medzinádrž | – | – | – | 565 l
Malý inzerát
Wiefelstede
957 km
Prommer
SiemensC79451-A3449-A11
Volať
Stav: použitý, Klávesnica, ovládací panel, priemyselné zariadenie, SPS pracovná stanica, programovacie zariadenie, ručné programovacie zariadenie, programátor
Kjdpohzc R Ijfx Ac Hofa
- Výrobca: Siemens, Simatic S5 programovacie zariadenie Prommer, originálne balenie
- Typ: C79451-A3449-A11
- Rozmery balenia: 200/160/V40 mm
- Celková hmotnosť: 0,7 kg
Malý inzerát
Menslage
944 km
Speidel, Spagni, Sommer Maltmann, varňa 500l (5hl) (2016)
Speidel, Spagni,Sudhaus
Volať
Stav: použitý, Rok výroby: 2016, Prehľad Tento kompletný varný súbor s objemom 500 litrov bol vyrobený v rokoch 2016 až 2017 poprednými európskymi firmami vrátane Speidel, Spagni, Skrlj, Sommer a MTA IT. Navrhnutý bol ako riešenie na kľúč pre malé až stredne veľké pivovary a obsahuje všetky dôležité zariadenia na rmutovanie, fermentáciu, chladenie, uzatváranie, etiketovanie a spracovanie sladu. Zariadenie bolo doposiaľ prevádzkované pri výkone 600 fliaš/h, pričom výkon je možné zvýšiť na 900–1 000 fliaš/h. Ponúkame ho na predaj z dôvodu ukončenia prevádzky pivovaru a je okamžite k dispozícii.
Technické údaje
Varná kapacita: 500 l (Braumeister 500 l, atmosférické vyhotovenie)
Kapacita fermentácie: 4 × 625 l (spolu 2 500 l)
Formáty: Korunkové uzávery 26 mm (možno prispôsobiť na 29 mm)
Typ etiketovača: samolepiaci, poloautomatický, pre valcovité fľaše
Výkon sladovej mlynčeka: 150 kg/h
Chladič: MTA TAEevo TECH 015, 3,8 kW, chladivo R410A
Výrobná rýchlosť: 600 fliaš/h (nastaviteľné na 900–1 000 fliaš/h)
Elektrické pripojenie (varovňa): 230/400 V, 32 A, 50/60 Hz, IP43
Dodané komponenty
Kfsdpfsw Nk Ezox Ac Hea
Speidel Braumeister 500 l varovňa (2017)
4 × Speidel kvasné tanky 625 l (2017)
Spagni Aircorona 26/29 FE pneumatický uzatvárač korunkových uzáverov (2017)
Skrlj E03 180 poloautomatický etiketovač (2017)
Sommer Maltman 110 šrotovník (2017)
MTA TAEevo TECH 015 procesný chladič (2016)
Prídavné vybavenie: žeriav, ručný plnič, vzduchové kompresory, tank na miešanie cukru, prečerpávacie čerpadlá
Malý inzerát
Wiefelstede
957 km
Prommer
Siemens6ES5 695-OAA11
Volať
Stav: použitý, Klávesnica, ovládací panel, priemyselná, SPS pracovná stanica, programovacie zariadenie, ručné programovacie zariadenie, programátor
Kfedshzc R Sepfx Ac Hoa
- Výrobca: Siemens, Simatic S5 programovacie zariadenie Prommer v originálnom balení
- Typ: 6ES5 695-OAA11
- Napätie: 230/115 V
- Rozmery balenia: 260/190/V80 mm
- Celková hmotnosť: 2,2 kg
Malý inzerát
Rakúsko
258 km
Pásová píla
BIANCO370 A DS 3R
Volať
Stav: nový, Condition: new
Delivery time: approx. 10 weeks from order
Country of origin: Italy
Price: €58,000
Lease rate: €1,096.20
Saw frame: pivoting frame
Saw blade dimensions: 3120 x 27 x 0.9 mm
Blade speed: infinitely variable 15 – 101 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 310 x 240 mm
Cutting capacity 45° round: 230 mm, square: 230 mm
Cutting capacity 60° round: 140 mm, square: 140 mm
Cutting capacity -45° round: 200 mm, square: 170 mm
Min. remnant length: 240 mm
Working height: 835 mm
Kodoxiyy Hjpfx Ac Hjfa
Hydraulic motor: 0.37 kW
Main motor: 1.5 kW
Coolant pump motor: 0.12 kW
Feed drive torque: 1.95 Nm
Automatic saw frame rotation motor torque: 1.95 Nm
Length: 5,150 mm
Width: 3,200 mm
Height: 1,950 mm
Transport dimensions: 5,000 x 2,200 x 1,900 mm
Weight: 2,150 kg
CNC control with 7" touchscreen for the following functions: feed length, piece count and automatic saw frame rotation for mitre setting
Automatic feed: 3,000 mm/stroke
Variable cutting pressure
Machine with stepless speed control
Coolant system
Powered chip brush
Chip conveyor
Automatic saw blade breakage monitoring
Hydraulic clamping devices
Recommended max. diameter of solid material in automatic mode: 150 mm
Operating manual in German or English
OPTIONS:
Hydraulic bundle clamping device, micro-spraying system, variable clamping pressure, 10" screen, remote maintenance, roller conveyors, infeed system and saw blades on request
Malý inzerát
Hauzenberg
444 km
Laserový rezací stroj
LEDI LaserLD1080
Volať
Stav: nový, Funkcionalita: plne funkčný, Rok výroby: 2025, laserový výkon: 1 500 W, vlnová dĺžka lasera: 1 080 nm, dĺžka stola: 1 000 mm, šírka stola: 800 mm, pojazdová vzdialenosť osi X: 1 000 mm, zdvih osi Y: 800 mm, hmotnosť obrobku (max.): 500 kg, vstupné napätie: 400 V, typ chladenia: voda, celková hmotnosť: 2 500 kg, celková dĺžka: 3 500 mm, celková šírka: 3 500 mm, celková výška: 2 300 mm, šírka dverového otvoru: 1 000 mm, výška otvoru dverí: 1 000 mm, typ nastavenia výšky: elektrický, Výbava: kabína, Laser cutting machine with 1.5kW fiber laser (new machine)
- Equipped with integrated, automatic sheet feeder, e.g. for processing coil stock
- With automatic sheet clamping system
Need higher laser power or a larger cutting table? No problem—we are happy to provide a tailored quote.
- High-precision cutting machine
- 1.5 kW laser source (MaxPhotonic)
Cutting steel sheets up to 15mm
Cutting stainless steel sheets up to 6mm
Cutting aluminium sheets up to 6mm
Kjdpfx Acevb Awce Hofa
- Working area approx. 1000 x 800mm
- Machine control system in German
- Includes nesting module
- Very easy to operate
- Powerful laser chiller
- Table support
Leasing or hire purchase available through our financing partner
Sale exclusively to commercial customers.
Machine dimensions approx.:
Width: 250cm
Height: 230cm
Depth: 300cm
Weight: approx. 3000kg
Malý inzerát
Eilenburg
592 km
Minibus
FORDTourneo Custom 340L1 Titanium X 2.5L PHEV 360Kam
Volať
Stav: použitý, najazdené kilometre: 32 km, výkon: 171 kW (232,50 k), typ paliva: hybridný, typ prevodu: automatický, celková hmotnosť: 3 400 kg, prvá registrácia: 04/2025, emisná trieda: Euro 6, farba: sivý, počet sedadiel: 8, celková dĺžka: 5 050 mm, celková šírka: 2 275 mm, celková výška: 1 958 mm, Výbava: ABS, centrálne zamykanie, elektronický stabilizačný program (ESP), klimatizácia, navigačný systém, sadzový filter, Internal number: 12433
Errors and prior sale excepted! ----
SPECIAL EQUIPMENT
* Electrical prep set for towing device (wiring harness and trailer module)
* Windows, 2nd row: Pop-out windows in the side panels
* Heated steering wheel
* Radio: B&O Sound System with 15 speakers and up to 1000 watts
* Seat Package 23: Driver’s seat and front passenger single seat, 8-way electrically adjustable – seat heating for driver and front passenger – inner and outer armrests – lumbar support for driver and front passenger, 4-way adjustable – passenger airbag – side airbags, right and left – head/shoulder airbags, front right and left – Feeltek leatherette upholstery Windsor Style in Black Onyx
* 4 lashing eyes
FURTHER EQUIPMENT
* 2 grab handles on driver’s and front passenger side
* 2-stage unlocking for passenger compartment and cargo area
* 3 USB ports for the 2nd row seats
* ABS
* Front storage compartment
* Passenger airbag – with deactivation function
* Driver airbag
* Exterior mirrors with integrated indicators – electrically adjustable, heated, and power folding
* Battery: H7 AGM single battery
* Roof console
* Thatcham certified anti-theft alarm system – with interior monitoring in driver cabin and cargo area, incl. central locking additional with double locking
* ESP – with electronic brake force assist
* Electric front windows with quick up/down function
* Electronic parking brake
* Ford Key Free system incl. Ford Power Start function
Kfedpfxewb N Ado Ac Hea
* FordPass Connect – WiFi hotspot 5G modem (up to 5G/LTE, for up to 10 mobile devices)
* Heated windscreen
* Lockable glovebox
* Rear swing door
* Interior lighting in passenger compartment
* Front interior lighting
* 3-zone climate control – with automatic temperature control for driver, front passenger, and separate rear compartment controls – with auxiliary heating – R-1234yf refrigerant – electric heater – electric temperature control in the rear
* Fuel tank 63 l
* LED tail lights
* LED headlights: LED high beam, LED low beam, LED daytime running lights including integrated front LED indicators, static cornering light, high beam assist
* Charging cable, single-phase, 5m length
* Inductive charging station in center console for mobile devices
* Steering wheel, Sensico leather-look
* Large center console
* Driver fatigue monitor
* Emergency call assistant (eCall)
* Package: Rear Seat Package 14: 6 rear seats, comprising – 2nd row: 3 single seats, center seat with folding table on seat back – 3rd row: 1 single seat and 1 double bench
* Package: Technology Package 6: Blind Spot Assist incl. CTA reverse emergency braking assist – Pre-Collision Assist (camera and radar based) – Driver fatigue warning – Lane, lane-keeping and lane change assistant – Lane Pilot – Traffic sign recognition system – navigation function – Park Pilot system front/rear – Adaptive cruise control with stop & go – Intelligent speed limiter with speed limit display – Surround view camera
* Picnic light
* Radio: Ford audio system with 13" multifunction display and Ford SYNC 4 incl. navigation – DAB/DAB+ – FordPass Connect – Integrated control panel and audio remote on steering wheel – AppLink (wireless) – Amazon Alexa built-in voice assistant – cloud-based navigation with traffic information, lane recommendations, and road map for Western Europe
* Radio accessories: 10 speakers
* Tire repair kit
* Tire pressure monitoring system
* Wheels: Alloy wheels
Malý inzerát
Nemecko
718 km
Sklápací príves
Schmitz CargobullSGF S2
Volať
Stav: použitý, Rok výroby: 2018, 2018 | Schmitz Cargobull SGF S2 | Tipping Semi-Trailer
Kfsdpox I S I Aofx Ac Hea
📍Location: Germany, Offenbach am Main
🚛 Delivery available to your location – Use our shipping calculator to estimate transport costs!
💰 Buy Now for EUR 18,900 or Make an Offer.
Payment upon delivery available for a reasonable fee (subject to approval)*
👷♂️ Inspected by an independent expert
8 inspection points 8 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️
📌 Inspector's Comment:
Trailer in very good condition. It was used as a spare unit, hence both mileage and usage are very low. Air suspension and disc brakes.
📄 Want to see the full inspection report, extra photos, or a video?
Tip: Use reference "39692 Equippo" when looking up more details online.
💡 Why choose this machine and our service:
✔ Comprehensive inspection by professionals
✔ Jobsite delivery available
✔ Money-Back Guarantee
✔ Secure and flexible payment options
🔄 Looking for other equipment?
We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.
Malý inzerát
Łódź
350 km
Vstrekovací lis
Arburg370S 700-100/100
Volať
Stav: veľmi dobrý (použitý), Rok výroby: 2009, Arburg 370S 700-100/100 / 2K machine / Operating hours: 33,544 in automatic mode / Very good technical condition
Year of manufacture: 2009
Injection unit:
Screw diameter: 30 mm
Shot weight: 65 g
Kfjdpexz Atmsfx Ac Hja
Injection pressure: 1,390 bar
Dosage volume: 71 cc
Clamping unit:
Clamping force: 70 t
Tie bar spacing: 370x370 mm
Mounting platens size: 510x510 mm
Ejector: hydraulic
Clamping unit: hydraulic
Control: SELOGICA - touchscreen
Additional equipment:
2K machine
Operating hours: 33,544 in automatic mode
Euromap 67
Robot interface
Air valve x 5
Hydraulic core pull x 2
Control with hot runner
Reinforced injection units - bimetal
Proportional valves on injection units - precise injection
Parallel movements
Vertical injection unit - screw diameter 20 mm (29 g/PS)
Machine with cylinder / battery with compressed nitrogen (additional boost for fast operation)
Machine with integrated Arburg conveyor belt and original sorting flap
Option to purchase an original Weber rotary table
Possible to change the screw diameter on both injection units to manufacturer-recommended diameters
Dimensions:
Weight: 4,440 kg
Length/Width/Height: 3.48x1.58x2.97 m
Drive:
Pump/motor: 15 kW
Heating capacity: 4.9 kW
Total power: 19.9 kW
All machines offered are started and tested by our service engineers prior to sale.
It is possible to obtain a video of the technical testing of the selected machine, or to participate in live technical tests at our facility in Łódź.
Price: On request
Kliknutie
Fulda
752 km
Olejom plnený výkonový transformátor
MGM Transformatoren GmbH
Stav: použitý, Rok výroby: 2008, Funkcionalita: plne funkčný, • Device type: Oil-cooled transformer
• Installation type: Stationary, floor-mounted
• Application context (visual): Industrial power supply for production machinery
Manufacturer
• Manufacturer (nameplate): MGM Transformer Company
• Manufacturer location (nameplate): City of Commerce, CA 90040, USA
• Country of manufacture: United States (explicitly stated: “Made in USA”)
Identification
• Manufacturer's serial number (SN): 08-09-08-50232A
• Additional identification mark: 7008608D0002
• Catalog number (CAT NO): M2885A2625U0333
• P/L no.: P2885TU-0333
Electrical Specifications (nameplate)
• Rated power: 2885 kVA
• Phases: 3 PH
• Frequency: 50 Hz
• High voltage (HV): 20,000 V
• Low voltage (LV): 2300 / 2300 / 2300 V
• Impedance: 6.36% at 2885 kVA
• Insulation class: OA
• Temperature rise: 65 °C
Insulation / Dielectric Data
• HV BIL: 125 kV
• LV BIL: 60 kV
• Cooling medium: Oil
• Fluid level reference:
– 14 inches below handhole at 25 °C
– Fluid level change: 0.64 inches per 10 °C
Mechanical Data / Tank Data
• Tank vacuum rating: −10 PSI (vacuum filling)
• Maximum operating pressure: +7 PSI
• Altitude rating: Up to 3,300 ft above sea level
Weight Data (nameplate, approx.)
• Weight of core and coil: 11,820 lb
• Tank and fittings: 8,320 lb
• Oil volume: 1,235 gal
• Total weight: 27,500 lb
• Weight without tank: 11,820 lb
Tap Changer Information (nameplate)
• Tap positions: 1 (A) to 5 (E)
• HV tap voltages:
– 21,000 V
– 20,500 V
– 20,000 V
Kfedpfx Acex It Sco Hea
– 19,500 V
– 19,000 V
Malý inzerát
Rakúsko
258 km
Pásová píla
BIANCO370 A DS 1R
Volať
Stav: nový, Condition: New
Delivery time: approx. 10 weeks from order
Country of origin: Italy
Price: €45,210
Leasing rate: €863.51
Saw frame: Swivel frame
Saw blade dimensions: 3120 x 27 x 0.9 mm
Blade speed: Infinitely variable, 20–100 m/min
Cutting capacity at 0° (round): 280 mm
Cutting capacity at 0° (square): 240 mm
Cutting capacity at 0° (flat): 310 x 240 mm
Cutting capacity at 45° (round): 230 mm; (square): 230 mm
Cutting capacity at 60° (round): 140 mm; (square): 140 mm
Cutting capacity at -45° (round): 200 mm; (square): 170 mm
Minimum residual workpiece length: 240 mm
Working height: 835 mm
Hydraulic motor: 0.37 kW
Main motor: 1.5 kW
Coolant pump motor: 0.12 kW
Feed motor torque: 1.95 Nm
Torque, motor for automatic saw frame rotation: 1.95 Nm
Length: 2800 mm
Width: 2000 mm
Height: 1820 mm
Weight: 1200 kg
CNC control with 7" touchscreen for the following functions:
Feed length, piece count, and automatic saw frame rotation for miter adjustment
Automatic feed: 1000 mm/stroke
Variable cutting pressure
Kfsdpfx Aswiqwxjc Hoa
Machine with stepless speed adjustment
Coolant system
Motor-driven chip brush
Chip conveyor
Automatic saw band breakage monitoring
Hydraulic clamping devices
Recommended max. diameter of solid material in automatic mode: 150 mm
Operating manual in German or English
OPTIONS:
Hydraulic bundle clamping device, micro-spray device, variable clamping pressure, 10" display, remote maintenance, roller conveyors, feed system and saw blades available on request.
Malý inzerát
Hauzenberg
444 km
Laserový rezací stroj
LEDI LaserLG-6080
Volať
Stav: nový, Funkcionalita: plne funkčný, Rok výroby: 2025, laserový výkon: 1 500 W, vlnová dĺžka lasera: 1 080 nm, dĺžka stola: 600 mm, šírka stola: 800 mm, pojazdová vzdialenosť osi X: 600 mm, zdvih osi Y: 800 mm, hmotnosť obrobku (max.): 500 kg, vstupné napätie: 400 V, typ chladenia: voda, celková hmotnosť: 2 500 kg, celková dĺžka: 3 500 mm, celková šírka: 3 500 mm, celková výška: 2 300 mm, šírka dverového otvoru: 600 mm, výška otvoru dverí: 800 mm, typ nastavenia výšky: elektrický, Výbava: kabína, Laser cutting machine with 1.5kW fiber laser
(New machine)
Our goal is to offer highly precise, long-term stable, and yet affordable laser machines.
Our machines are ideal for workshops and repair businesses.
A perfectly developed library of cutting parameters is included, as well as first-class service.
- Highest precision
- Machine bed made from natural stone
- Drives by YASKAWA linear motors (and, naturally, linear guides)
- Axes measured and calibrated with Renishaw measuring system (complete with protocol)
- Pneumatic sheet clamping
- High-precision cutting machine
- 1.5 kW laser source by MaxPhotonic
- Finest beam diameter (20µm)
- Traverse path approx. 600 x 800mm
- Machine control in German language
- incl. nesting module
- Very easy to operate
- Powerful laser chiller
- Table support
Leasing or hire-purchase is possible via our financing partner
Sale is exclusively to commercial customers.
Machine dimensions approx.:
Width: 190cm
Height: 190cm
Kedpfx Ajx I D Nxsc Hjfa
Depth: 180cm
Weight: approx. 2500kg
Malý inzerát
Leipzig
602 km
Teplovzdušná rúra
CompactsystemMARTINA 55
Volať
Stav: nový, Rok výroby: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm
Weight: 300 kg
Total power requirement: 1.2 kW
Warm Air Furnace MARTINA 55
The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft businesses.
They are designed for heating large functional spaces such as workshops and work areas in commercial and industrial companies.
These warm air systems do not require long heat-up phases and can heat up workshops or production facilities, such as joineries and carpentries, in a very short time.
Acceptable fuels include solid wood and its derivatives, e.g. remnants of solid wood panels, wood chips, sawdust, pellets, or briquettes.
The MARTINA warm air furnaces comply with EU Directive 98/37EC, the Italian Presidential Decree No. 459 of July 24, 1996, and with the safety requirements of Directive 89/392 EC.
All warm air furnaces of the MARTINA series – 15, 30, 55, 85, 120, 180, 240, 350 – satisfy both emission stages as stipulated by the requirements of the 1st German Federal Immission Control Ordinance (BImSchV).
- Automatic and continuous air operation
- Rated thermal output: 49.9 kW
- Thermal output in kcal: 43,000
- Fuel consumption: 15 kg/h
- Air output: 4900 m³/h
- Combustion chamber depth: 650 mm
- Loading door: 370 x 350 mm
- Warm air fan: 1.12 kW / 230 V
- Firebox negative pressure: 0.2-0.3 mbar
- Nominal draft requirement: 0.18 mbar
Kfodevz Hq Hjpfx Ac Hoa
- Heatable space: approx. 1,000 m³
- Heatable area: approx. 220 m²
- Required installation space: width 720 mm, depth 1000 mm, height 1900 mm
- Weight: 300 kg
- Flue pipe diameter (outlet): 160 mm
- Chimney diameter (reference): 200 mm
- Efficiency: 85-90%
- Recommended chimney draft: 13 Pa
- Flue gas temperature: 290°C
- Warm air outlet connections: 2 x Ø 200 mm
- For further data, please refer to the attached data sheet
The 2 duct connectors for the outgoing warm air are located at the rear of the furnace in the lower section.
A maximum of 20 meters of ducting per connector is permitted for air distribution.
Malý inzerát
Nemecko
718 km
Traktor
MANTGX 18.480 4x2 BLS WITH TIPPER HYDRAULIC AND GOOD TIRES
Volať
Stav: použitý, Rok výroby: 2015, 2015 | MAN TGX 18.480 4x2 BLS WITH TIPPER HYDRAULICS AND GOOD TYRES | Tractor Unit | 396,459 km
📍Location: Germany, Heusweiler
🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs!
💰 Buy Now for EUR 19,900 or Make an Offer.
Payment on delivery possible for a low fee (subject to approval)*
👷♂️ Inspected by an independent expert
28 inspection points 28 approved ✅ 0 deficiencies ℹ️ 0 issues ⚠️
📌 Inspector's Comment:
The MAN truck was in good condition at the time of inspection, but most tyres need replacing. The left rear mudguard is torn off. Unfortunately, the trailer could not be uncoupled, which limited the truck inspection. Tilting the driver’s cab was not possible due to a lack of tools, so an engine inspection could not be completed. The truck is equipped with a double-acting hydraulic system with two lines and an additional pump, suitable for a walking floor setup. Overall height with cab spoiler mounted is 3.9 m.
📄 Want to see the full inspection, extra photos, or a video?
Tip: The reference "31325 Equippo" is commonly used when searching for more details online.
💡 Why this machine and our service stand out:
✔ Thorough inspection by professionals
✔ Jobsite delivery available
✔ Money-back guarantee
Kfjdpfxex H A Iqo Ac Hsa
✔ Secure and flexible payment options
🔄 Considering other equipment options?
We offer useful tools and resources for all equipment owners and operators – easily accessible on our platform.
Malý inzerát
Łódź
350 km
Vstrekovací lis
Arburg570C 2000-350/150
Volať
Stav: veľmi dobrý (použitý), Rok výroby: 2003, Arburg 570C 2000-350/150 / Produktionslinie mit seitlichem Roboter Arburg Multilift / 2K-Spritzgießmaschine
Baujahr: 2003
Spritzeinheit:
Schneckendurchmesser: 40 mm
Schussgewicht: 153 g
Spritzdruck: 2120 bar
Dosierhub: 182 ccm
Schließeinheit:
Schließkraft: 200 t
Kfjdpexz Acnofx Ac Hja
Holmabstand: 570 x 570 mm
Plattengröße: 795 x 795 mm
Auswerfer: hydraulisch
Schließeinheit: hydraulisch
Steuerung: SELOGICA
Zusätzliche Ausstattung:
Produktionslinie mit seitlichem Roboter Arburg Multilift
2K-Spritzgießmaschine
Luftventil x 1
Hydraulischer Kernzug x 5
Steuerung für Heißkanäle
Verstärkte Spritzeinheit – Bimetall
Proportionalventile an den Spritzeinheiten – präzises Spritzen
Vertikales Spritzaggregat – Schneckendurchmesser: ⌀25 mm – 49 g/PS
Alle angebotenen Maschinen werden vor dem Verkauf durch unsere Servicetechniker in Betrieb genommen.
Es besteht die Möglichkeit, ein Video der technischen Tests der ausgewählten Maschine zu erhalten oder an Live-Techniktests in unserem Werk in Łódź teilzunehmen.
Preis: auf Anfrage
Malý inzerát
Annaberg-Buchholz
526 km
Panelová dodávka
VOLKSWAGENCaddy Cargo Maxi 2.0 TDI 4Motion Klima LED SHZ
Volať
Stav: nový, najazdené kilometre: 10 km, výkon: 90 kW (122,37 k), typ paliva: nafta, celková hmotnosť: 2 400 kg, farba: sivý, typ prevodu: mechanický, emisná trieda: Euro 6, počet sedadiel: 2, Rok výroby: 2025, Výbava: ABS, centrálne zamykanie, elektronický stabilizačný program (ESP), klimatizácia, pohon všetkých kolies, sadzový filter, Volkswagen Caddy Cargo Maxi Long Wheelbase 2970 mm 2.0 TDI 90kW/122 HP 4Motion All-Wheel Drive with 6-Speed Manual Transmission in Pure Grey – Available Immediately
List New Price €45,972 incl. VAT
* 5 years VW factory warranty up to 200,000 km
* 2-seater with fabric upholstery
* Driver’s seat with manually adjustable armrest and lumbar support
* Climatic air conditioning with manual control
* "Basic" winter package and laminated heat-insulating windscreen, heated, heated driver’s seat, heated front washer nozzles, washer fluid level indicator with enlarged tank
* LED main headlights with LED daytime running lights
* Rear Park Distance Control (PDC)
* Cruise control
* Rear wing doors without window cut-outs, asymmetrically split
* Load area flooring made from wood (anthracite): multi-bonded plywood, 10 mm thick, anti-slip
* High bulkhead without window
* “Composition” radio with 10" colour touchscreen, traffic sign recognition, 2 USB Type-C ports in the front centre console
* Mobile online services Wired & Wireless App-Connect (Apple CarPlay, Android Auto)
* Digital cockpit
Kfsdpfsxul H Nox Ac Hoa
* Lane Assist lane keeping system
* Electrically adjustable and heated exterior mirrors
* Rubber floor coverings in cab
* Multifunction steering wheel
* Fog lights with cornering light
* Intermittent windscreen wipers with light sensor
* Driver alert and fatigue detection system
* 17" steel wheels / tyres 215/55 R17 98H
* Driver and passenger airbag, without knee airbag, deactivation for passenger airbag
* Front side airbags and curtain airbags
* Black roof rails
* Roof rack in cab (storage compartment in roof lining with 2 grab handles in cab)
Further equipment:
Driver and front passenger airbags, passenger airbag deactivatable, black unpainted exterior mirrors and door handles, silver side sliding door rail cover, Electronic Stability Programme (ESP), brake assist, ASR/ABS, EDS, MSR, multi-collision braking system, tinted laminated windscreen, 2 folding remote keys, cup holders in front, interior trim: matte décor inserts, load/cargo area lighting: 1 unit, Body type: panel van, mechanically adjustable steering column (height/length), headlight range adjustment, commercial vehicle registration, Engine 2.0 L - 90 kW TDI, non-smoker package, emergency call system, electric parking brake with auto-hold function, tyre repair kit (tire mobility set), tyre pressure monitor, low emissions according to Euro 6d, right-side sliding door, SCR system (AdBlue technology), front seat belts with pretensioner, height-adjustable, Double Grid fabric upholstery, Start/stop system, dustproof door seals, plastic door trim, first aid kit and warning triangle, tie-down rings in luggage/load area, online services preparation, front seatbelt warning system, green-tinted heat-insulating glass (side/rear)
– Financing, leasing and trade-in of vehicles available
– Cost-effective installation of accessories and special equipment possible (all price examples incl. installation and VAT):
- Navigation system
- Fixed or detachable towbar
- Plastic floor covering for cargo area
- Multiplex plywood floor for cargo area
- Cargo area linings up to roof
- Shelving systems for various industries
- Winter complete wheels
- Conversion to all-season tyres (€350)
- Alloy wheels in various designs
Malý inzerát
Rakúsko
258 km
Pásová píla
BIANCO330 AE PLC
Volať
Stav: nový, Condition: New
Delivery time: approx. 10 weeks from order
Country of origin: Italy
Price: €17,770
Leasing rate: €341.18
Saw Frame: Swivel frame
Saw Blade Dimensions: 3010x27x0.9 mm
Blade Speed: 35/70 (PLC) m/min
Blade Speed (stepless): 20-100 (CNC/Touch) m/min
Cutting Capacity 0° Round: 260 mm
Cutting Capacity 0° Square: 240 mm
Cutting Capacity 0° Flat: 330x120 mm
Cutting Capacity 45° Round: 200 mm, Square: 190 mm
Kfsdewiqpuepfx Ac Hsa
Cutting Capacity 60° Round: 120 mm, Square: 115 mm
Min. Remnant Length: 220 mm
Working Height: 835 mm
Hydraulic Motor: 0.37 kW
Coolant Pump Motor: 0.12 kW
Length: 2800 mm
Width: 2050 mm
Height: 1900 mm
Weight: 1090 kg
VARIANT PLC: Material feed adjustment via handwheel, mechanical counter, and limit switch
VARIANT CNC: Feed length and quantity via CNC (99 programs)
VARIANT TOUCH: As CNC, but with 7" touchscreen for easier operation
Automatic cutting cycle: Clamping, saw blade and coolant ON, cutting process, saw blade and coolant OFF, rapid return, unclamping
Automatic material feed: PLC: 800 mm/stroke, CNC/Touch: 600 mm/stroke
Variable cutting pressure
Machine with 2 cutting speeds (PLC) or stepless speed control (CNC/Touch)
Coolant system
Automatic saw blade breakage monitoring
Hydraulic vices
Material chute
Chip brush
Recommended max. dia. for solid material in automatic mode: 150 mm
Operating manual in GERMAN
ALTERNATIVES:
330 AE CNC model €20,490.00
330 AE Touch model €22,600.00
OPTIONS:
Roller conveyors and saw blades on request
Malý inzerát
Hörsching
412 km
Chladený nákladný automobil
MERCEDES-BENZACTROS 1833, EURO6, THERMOKING T 1200R, LBW-DAUTEL,
Volať
Stav: použitý, najazdené kilometre: 211 000 km, výkon: 240 kW (326,31 k), prvá registrácia: 01/2019, pohotovostná hmotnosť: 10 300 kg, maximálna hmotnosť nákladu: 7 615 kg, celková hmotnosť: 18 000 kg, ďalšia kontrola (TÜV): 01/2025, typ prevodu: automatický, emisná trieda: Euro 6, | Mercedes Actros 1833 | Euro 6 | Thermoking T 1200R | Tail lift Dautel 2000kg | Air conditioning, radio | Auxiliary heater, power windows | Side door | Multifunction steering wheel, cruise control | Heated seats, auxiliary heater, air conditioning | On-board computer | Loading area dimensions: L: 7.50m W: 2.46m H: 2.49m
Seller: Christopher Glock (German/English) Mobile: (Whatsapp available) Email: christopher.
Complete stock at: Hofgasse 25, A-4063 Hörsching | Subject to errors, input mistakes, and prior sale. | Sale exclusively to commercial customers
Kfjdpsviaq Nefx Ac Hea
Malý inzerát
Leipzig
602 km
Teplovzdušná rúra
CompactsystemMARTINA 30-15
Volať
Stav: nový, Rok výroby: 2025, Dimensions (L/W/H): 600x800x1900 mm
Weight: 230 kg
Total power requirement: 0.5 kW
Warm Air Heater MARTINA 30-15
The MARTINA warm air heaters are the ideal solution for energy utilization in woodworking industrial and craft businesses.
They are designed for heating larger areas such as workshops and workspaces in crafts and industrial environments.
These warm air systems do not require long heat-up phases and heat up the workshop hall of a joinery, carpentry, or other production sites in a very short time.
Solid wood and its by-products, such as solid wood board residues, chips, sawdust, pellets, or briquettes, serve as fuel.
The MARTINA warm air heaters comply with the EU Directive 98/37CE (Italian Presidential Decree No. 459 of 24 July 96) and the safety guideline 89/392 CE.
All MARTINA-series warm air heaters (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both emission levels required by the 1st BImSchV.
- Automatic and continuous air operation
- Thermal output: 14.8 kW
- Thermal output in Kcal: 12,720
- Fuel consumption: 4.5 kg/h
- Air flow rate: 2,400 m³/h
- Combustion chamber depth: 580 mm
Kfjdpfx Aevz Hqtec Hoa
- Loading door: 330 x 330 mm
- Warm air blower: 0.49 kW / 230 V
- Combustion chamber negative pressure: 0.2-0.3 mbar
- Flue draft at nominal output: 0.18 mbar
- Heatable room volume: approx. 300 m³
- Heatable area: approx. 60 m²
- Space requirement: width 600 mm, depth 800 mm, height 1900 mm
- Weight: 230 kg
- Flue outlet diameter: 160 mm
- Recommended chimney diameter: 200 mm
- Efficiency: 85-90 %
- Chimney static pressure: 11 Pa
- Flue gas temperature: 286°C
- Warm air outlet connectors: 2 x Ø 200 mm
- Further technical details can be found in the attached data sheet
The two pipe connectors for the outgoing warm air are located on the back of the heater in the lower section.
A maximum of 20 meters of ducting per connector is permitted for air distribution.
Malý inzerát
Aalen
706 km
Stolová fréza
VEMATFM 2-4
Volať
Stav: použitý, celková výška: 1 800 mm, celková šírka: 1 300 mm, celková dĺžka: 2 000 mm, celková hmotnosť: 900 kg, priemer vretena: 30 mm, dĺžka stola: 2 000 mm, šírka stola: 900 mm, otáčky (min.): 3 000 ot./min, otáčky (max.): 9 000 ot./min, otáčky vretena (min.): 3 000 ot./min, maximálna rýchlosť vretena: 9 000 ot./min, zdvih vretena: 120 mm, výkon: 6,2 kW (8,43 k), požadovaná šírka: 1 300 mm, požiadavok na dĺžku priestoru: 2 000 mm, No. 3252
Table Spindle Moulder VEMA TFM 2-4
Used
Spindle diameter: 30 mm
Usable spindle height: approx. 150 mm
Spindle stroke: 120 mm
Spindle height adjustable via handwheel, not tiltable
Electric brake, spindle lock
Motor power: 6.2 kW
Spindle speeds: 3000 / 4500 / 6000 / 9000 rpm
Forward/reverse rotation
Table dimensions: 2000 x 900 mm (L x W)
Extraction ports above and below the table
Feed unit: HAFFNER 904, 4 rollers
Feed speed: 4.5 / 9 / 11 / 22 m/min
Milling fence: Aigner Integral
Table extension: Aigner
Various milling tools and accessories as shown in the pictures
Transport dimensions: approx. 2000 x 1300 x 1800 mm (L x W x H)
Weight: approx. 900 kg
Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, transport or installation
Dismantling, loading, and transport by us optional
Errors in description and price excepted
To avoid misunderstandings, an on-site inspection by appointment is possible and recommended
Sale as is
Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, no guarantee
Subject to prior sale
For used machines, any warranty is excluded; sold as inspected
Pictures and videos are for reference and do not represent the actual scope of delivery
Kfjdjx Hkdaspfx Ac Hoa
Payment terms: Prices plus legal VAT, payment before pickup or dispatch
Delivery terms: Ex-site
Malý inzerát
Łódź
350 km
Vstrekovací lis
Arburg470C 1500-150/150
Volať
Stav: veľmi dobrý (použitý), Rok výroby: 2005, Arburg 470C 1500-150/150 / 2K machine / Machine in very good technical condition
Year of manufacture: 2005
Injection Unit:
Screw diameter: 25 mm
Shot weight: 49 g
Injection pressure: 2500 bar
Metering volume: 54 ccm
Clamping Unit:
Clamping force: 150 t
Tie bar distance: 470x470 mm
Platen size: 685x685 mm
Ejector: hydraulic
Clamping unit: hydraulic
Control: SELOGICA
Additional Equipment:
2K machine
Euromap 67
Robot interface
Air valve x 1
Hydraulic core pull x 1
Injection unit hardened - bimetal
Ksdpfjxz Aagsx Ac Hofa
Proportional valve on injection unit – precise injection
Type of injection unit: Vario – offers the possibility, for example, to use the injection unit for side injection
Parallel movements
Vertical injection unit – screw diameter fi 25 mm (49 g/PS)
It is possible to change the screw diameter in both injection units for the screw diameters recommended by the manufacturer: 30, 35 mm
Dimensions:
Weight: 5700 kg
Drive:
Pump/motor: 30 kW
Heating capacity: 2 x 9.4 kW
Total power: 48.8 kW
All offered machines are started up by our service technicians before sale.
It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź.
Price: On request
Pečať dôvery
Predajcovia certifikovaní spoločnosťou Machineseeker

Malý inzerát
Zdziechowice
285 km
Filtračná ventilácia, odsávanie dymu Novus
NovusAirtower 20.000 EC
Volať
Stav: použitý, Rok výroby: 2017, prevádzkové hodiny: 22 300 h, typ vstupného prúdu: trojfázový, celková hmotnosť: 1 600 kg, celková šírka: 2 100 mm, celková dĺžka: 1 800 mm, celková výška: 3 700 mm, filtračná plocha: 222 m², sacia kapacita: 20 000 m³/h, Novus AirTower FT0120018 EC filter ventilation tower - 20,000 m³/h
Industrial hall filtration and ventilation for welding facilities — suitable for numerous technological processes, primarily in metalworking environments.
Exceptionally low energy consumption due to the use of innovative EC fans.
Replacement of standard fans with EC fans results in SIGNIFICANT savings by minimizing electricity consumption.
The EC fan with integrated inverter also allows for adjustment of fan speed, energy consumption, and device performance at operating ranges of 60%, 80%, and 100%.
Air is extracted from the top and draught-free air is discharged near the floor — precisely at workstations.
Layered filtration and ventilation principle; the device does not require ductwork installation.
Cartridge filter elements – self-cleaning using compressed air pulses during operation.
Kfjdpfx Acjxxhwrj Hsa
Filter cleaning via differential pressure – no loss of compressed air.
Layered ventilation principle: contaminated air is drawn in from above, filtered, and then released at floor level as clean, breathable air without generating drafts, at speeds below 1.2 m/s. Exactly where operators inhale it, providing wide coverage of 270 degrees. The Airtower operates according to the layered ventilation principle, recommended by occupational health associations and regarded as the best method of air circulation.
Year of manufacture: 2017
Operating hours: 22,300
Specifications:
- 4 x EC fans, each 3.9 kW
- Airflow: 20,000 m³/h
- Filtration surface: 222 m²
- 6 cartridge filters
- High-efficiency final filter
- Fire protection package
- EC Blue Energy Package
- Dust sensor for hall monitoring, with LED signaling – transmits dust level information to Airtower for automatic power regulation.
Energy savings depend on the concentration of dust present in the hall.
Very quiet operation
Inventory no.: 1067
Malý inzerát
Litva
778 km
Nožnicový zdvíhací stôl
Holland-LiftN195-12EL Combistar (19.5 m)
Volať
Stav: použitý, Rok výroby: 2006, prevádzkové hodiny: 286 h, 2006 | Holland-Lift N195-12EL 21.40 m | Used Scissor Lift Table | 286 hours
📍Location: Lithuania, Domeikava
🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs!
💰 Buy Now for EUR 10,000 or Make an Offer.
Payment on delivery available for an affordable fee (subject to approval)*
👷♂️ Inspected by an independent expert
31 inspection points: 27 approved ✅ 4 imperfect ℹ️ 0 issues ⚠️
📌 Inspector's Comment:
Considering the age of the machine, all components and functions operate as expected, and no major issues or anomalies were found during the inspection.
📄 Want to see the full inspection report, extra photos, or a video?
Tip: The reference "38106 Equippo" is commonly used when looking up further details online.
Kfodpfxjx Hq A No Ac Hsa
💡 Why this machine and our service stand out:
✔ Comprehensive professional inspection
✔ Jobsite delivery available
✔ Money-back guarantee
✔ Secure and flexible payment options
🔄 Considering other equipment options?
We provide helpful tools and resources for all equipment owners and operators – easily accessible on our platform.
Malý inzerát
Rakúsko
295 km
Elektrické lisy CNC Revolution Servo E
KK-IndustriesCNC elektrische Abkantpresse KKI Revolution DDM-80
Volať
Stav: nový, Pressure: 80
Bending length: 2550 mm
Frame gap: 2550 mm
Installation height: 590 mm
Stroke length (max.): 300 mm
Dimensions (LxWxH): 3680x1960x2500 mm
Weight approx.: 6100 kg
Motor power: 11 kW
CNC Servo Electric Press Brake KKI
Model: REVOLUTION DDM-8025 Servo-motorised Press Brake REVOLUTION
Servo-electric press brakes contain no hydraulic systems and, due to their flexibility and reliability, represent the technology of tomorrow.
The higher speed and accuracy of this new generation of machines offers better efficiency, ergonomic features, and environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with a variety of models and tonnages, Dener is a pioneer in this technology, backed by extensive experience and quality.
Standard equipment:
KK-Industries is the general agent for DENER Group. We have assembled a high-quality model for the European market. The CNC servo-electric press brake by KK-Industries, made by DENER:
Technological advantages, Model REVOLUTION DDM:
- The CNC servo-electric press brake stands out for its high precision, accuracy, and versatile applications.
- 100% electric, 0% hydraulic oil
- Up to 50% less energy consumption compared to conventional hydraulic press brakes
- High efficiency and accuracy
- High bending speed and significantly quieter
- Full working length between the frames can be used
- Reduced maintenance costs
- Environmentally friendly
- User-friendly control panel
- Automatic calculation of bending steps directly from STEP or DXF files
- Up to 35% faster than hydraulic press brakes
Standard equipment:
- 3D color graphic control Delem 66T 17" touchscreen
- CNC control of Y1, Y2, X, and R axes
- CNC crowning via 3D control
- X-axis 500 mm, R-axis travel 150 mm on 1.5 m and 2 m
- X-axis 750 mm, R-axis travel 250 mm on all other press brakes
- No compromise on upper tool and die: The CNC servo electric press brake KKI REVOLUTION is equipped with quality tools from EUROSTAMP Italy.
- Split gooseneck upper tool
- 4-V die block 60x60 mm (V= 16, 22, 35, and 50 mm)
- Back gauge with servo motors, guided on linear rails and ball screws
- A machine is only as good as the service behind it. That's why we emphasize highly qualified staff with years of experience in CNC sheet metal processing.
Kjdpfx Aced Etfwe Hsfa
- Laser safety device on the upper beam
- CE safety equipment
- Operating manual in GERMAN and ENGLISH
Options:
- Additional controlled back gauge axes: X1, X2, R, Z1, Z2, Delta X
- ATF Type 6-axis back gauge, X1, X2, R Type back gauge
- X-Prime Type back gauge, hydraulic upper and lower tool clamping
- CNC 3D touchscreen control DELEM DA-69T
We recommend the following options:
- Manual crowning €2,329
- CNC crowning €4,658
KK-Industries GmbH
Malý inzerát
Rakúsko
295 km
4 valce hydraulické ohýbanie
DURMAHRB-4 3008
Volať
Stav: nový, Bending (pre-bending): 6.0 mm
Sheet length: 3100 mm
Sheet thickness: 8.0 mm
Total power requirement: 11.0 kW
Weight approx.: 6.7 t
Dimensions (LxWxH): 4,88 x 1,16 x 1,18 m
Kfedpjd Ab H Hofx Ac Hoa
Image similar
Bending capacity: 8.0 mm
» at 3x top roll diameter
Pre-bending: 6.0 mm
» at 1.5x top roll diameter
Top roll diameter: 230 mm
Lower roll diameter: 210 mm
Side roll diameter: 190 mm
Max. opening: 30 mm
Working height: 825 mm
• Fully hydraulic drive of top and lower roll via planetary gearboxes
• Digital display for side roll positions
• Hydraulic drop-end bearing
• Cone bending device
• Hardened rolls
• Hydraulic adjustment of side rolls, synchronized via PLC
• Hydraulic adjustment of lower roll via torsion bar
• Pressure-adjustable lower roll
• Electrical and hydraulic overload protection
• Mobile control console
• Operating manual in GERMAN and ENGLISH
• Machine and equipment according to CE regulations
Catalog see following link:
Important points for conical bending:
• The max. sheet thickness is 50% of the nominal capacity
• The cone length may be max. 30% or must be more than 60% of the roll length
• Hardened rolls are recommended
Uľahčujeme vám vyhľadávanie: "oemme"
Okamžite a bezplatne dostanete nové ponuky e-mailom.
Vyhľadávaciu úlohu môžete kedykoľvek jednoducho ukončiť.















































































































































































































































































































