Then - kúpiť použité (177)

Stav: použitý, najazdené kilometre: 299 900 km, výkon: 175 kW (237,93 k), prvá registrácia: 08/2013, typ paliva: nafta, pohotovostná hmotnosť: 8 650 kg, maximálna hmotnosť nákladu: 3 340 kg, celková hmotnosť: 11 990 kg, veľkosť pneumatiky: 265/70R19.5, konfigurácia náprav: 4x2, rázvor náprav: 4 760 mm, brzdy: brzdenie motorom, farba: biely, kabína vodiča: denná kabína, typ prevodu: automatický, emisná trieda: Euro 5, zavesenie: oceľ-vzduch, počet sedadiel: 2, celková dĺžka: 2 550 mm, celková šírka: 3 850 mm, dĺžka ložného priestoru: 6 200 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 mm, Výbava: ABS, centrálne zamykanie, hmlové svetlá, imobilizačný systém, kabína, klimatizácia, nízka hlučnosť, palubný počítač, posilňovač riadenia, prípojné zariadenie, systém kontroly trakcie, tempomat, uzávierka diferenciálu, vyhrievanie sedadla, žeriav, Vehicle location: Bovenden, on-site. 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, radio-CD, cruise control, Telligent automatic transmission, ABS (anti-lock braking system), traction control (ASR), power take-off, front exhaust, differential lock, fog lights, leaf/air suspension, trailer coupling air+electric, low-noise G1, side aluminum underrun protection, pendulum flaps, roof hatch, rear-mounted crane, emergency stop, foldable, 2-point hydraulic support, 1x hydraulic extension, green environmental sticker. Pgedpfxsvhhv Dj Apxsk Wheelbase: 4760 mm. Superstructure: Hegla glass transport body with side racks, rear crane available for an extra charge of €10,000 to €17,000, e.g. Fassi F95A21. EEV engine, 5.3t front axle, rear axle H4 11t, 390mm crown wheel, ABS, disc brakes on front and rear axles, rear axle stabilizer, front underrun protection, programmable special module (PSM), toll system pre-installation, distributor cockpit, Telligent automatic transmission, pollen filter, automatic daytime running lights, reverse warning system, on-board diagnostics 2, engine brake with constant throttle, transmission lock for PTO, fuel tank capacity: 180l + 100l, MB 60-2c PTO low position with neutral-speed capability. Load diagram: 2.0m=4420kg, 4.1m=2210kg, 5.9m=1545kg (for a surcharge, 3 x mechanical extensions can be retrofitted, then up to 12.0m=570kg)! The current defective crane will be replaced by a Fassi F95A21 crane. The crane can be swapped for another model on request! Radio remote control can be retrofitted for an additional charge! Mileage: 305,465! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! -.

Stav: použitý, výkon: 301 kW (409,25 k), typ prevodu: iný, typ paliva: nafta, farba: čierny, najazdené kilometre: 1 001 km, kabína vodiča: iný, emisná trieda: euro2, Location of vehicle: Bovenden, Pgodpfx Apsvhhcwsxek Body: 10-cylinder twin-turbo diesel engine complete with alternator, starter, etc. Fully overhauled with documentation at Daimler-Benz on 12.03.2008! Since then vacuum-packed, MB warranty on repairs is valid for 12 months from commissioning. Engine speed: 2,500 rpm – 301 kW, weight approx. 1,500 kg, displacement 16,000 cm³, EURO 2. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to modifications, prior sale, and errors!

Stav: nový, Rok výroby: 2025, Suitable for: Outer pipe diameters: Ø26.9 (3/4″), Ø33.7 (1″), Ø42.4 (1 ¼”), Ø48.3 (1 ½”), Ø60.3 (2″). Outer pipe diameter for zinc outflow: Ø22 – Ø76. Pgjdpfoxyy A Aox Apxek Advantage: Quick and easy notching Wall thickness (steel): 5 mm Wall thickness (stainless steel): 3 mm Weight: 93 kg Operation: Electric (2.2 kW) Application: Round, square, and rectangular tubes Easy to operate The motorized tube notcher AL1-2U allows you to notch pipe outside diameters of Ø26.9 (3/4″), Ø33.7 (1″), Ø42.4 (1 ¼”), Ø48.3 (1 ½”), Ø60.3 (2″) and pipe diameters for zinc discharge from Ø22 up to Ø76. With the push of a button, the machine starts and the tube notcher operates continuously. This means the operator can work efficiently without restarting the machine each time. Electrically powered The motorized tube notcher AL1-2U is suitable for notching pipe outer diameters of Ø26.9 (3/4″), Ø33.7 (1″), Ø42.4 (1 ¼”), Ø48.3 (1 ½”), Ø60.3 (2″). Do you frequently need to notch pipes? Then the AL1-2U motor-driven tube notcher with its 2.2 kW electric motor is the solution for you! The motor, together with the special eccentric shaft that drives the punching tool, forms a single unit. Additionally, the motor is equipped with an ON/OFF switch with zero-voltage release and a protective cover.

Stav: nový, najazdené kilometre: 45 km, výkon: 129 kW (175,39 k), typ paliva: nafta, pohotovostná hmotnosť: 3 655 kg, maximálna hmotnosť nákladu: 4 895 kg, celková hmotnosť: 8 550 kg, konfigurácia náprav: 4x2, rázvor náprav: 3 400 mm, palivo: nafta, farba: biely, kabína vodiča: denná kabína, typ prevodu: automatický, emisná trieda: Euro 6, zavesenie: iný, počet sedadiel: 3, celková dĺžka: 5 700 mm, dĺžka ložného priestoru: 4 000 mm, šírka ložného priestoru: 2 000 mm, výška ložného priestoru: 400 mm, Výbava: ABS, centrálne zamykanie, hydraulika, imobilizačný systém, klimatizácia, palubný počítač, prípojné zariadenie, sadzový filter, tempomat, uzávierka diferenciálu, Fuso 9C18 Duonic City hooklift truck immediately available, also for rent with purchase option - Speed limiter 40 km/h for Switzerland - Optional containers in various versions available from approx. EUR 3,500 - Gross vehicle weight: 8,550 kg, unladen weight: 3,655 kg, payload without container: 4,895 kg - Downrating to 7.5 t GVW possible, payload then approx. 3,850 kg - Automatic transmission (Duonic) - Limited-slip differential - 2 x 100 AH batteries - Trailer hitch with ball head, 3,500 kg, incl. electrical kit (ex works) - Heated exterior mirrors - Automatic climate control - Radio pre-installation - Reversing warning system - PTO with engine speed increase, ex works - Battery and AdBlue tank covers - Preparation for battery disconnect relay - Traction tires (all-weather M+S) Continental - Seat covers - Optional installation: reversing camera, revolving beacons, trim panel, mesh/strap box, etc. - Various containers always in stock or available to order as options - 3 years / 100,000 km factory warranty, Fuso is a brand of Daimler Truck AG Hooklift system installed on Fuso 9C18 - Hooklift system for containers according to DIN 30722 part 3 - Lifting and sliding capacity 6,000 kg - Container length: 3,500–4,000 mm - Hook height: 900 mm - Hydraulic articulating hook arm (shallow lifting angle) - Hydraulic container locking system (can handle third-party containers, secure container transport) - Mechanical hook safety device - Cable remote control mounted on the A-pillar, can be operated outside the cab, additional mechanical emergency operation on the unit - Emergency stop function Pedowv Ebxjpfx Apxogk - CE certificate and kit box - Final paint finish: hook device black RAL 9005 / rollers black RAL 9005 - Subject to prior sale and errors! - More information and XXL photos on our homepage - For inquiries in English please call Features: air conditioning, automatic climate control, automatic transmission, VAT deductible, ABS, radio, onboard computer, cruise control, heated mirrors, electronic immobilizer, remote central locking, trailer coupling, power steering, diff. lock, tinted glazing, tachograph, local cab, air-suspended driver’s seat, electric windows, PTO, new, emission standard Euro 6, diesel, rear-wheel drive, very good condition, HSN 7149, hydraulics, consumption: 0.0/0.0/0.0 l/100 km (comb./city/out), particulate filter, available for rent, fine dust emissions sticker: 4 (green)

Stav: nový, Rok výroby: 2025, Are you looking for quality and expertise for your sheet metal processing machine? Then we are the right partner by your side. Pedpfodad Adjx Apxjgk Those who know us know that we are a reliable company :) PRESS BRAKE 2.64 m / 1.2 mm New machine. Warranty: 12 months. We deliver the goods with our own truck. CE Certificate Eccentric force transferred to both sides of the machine Working length: 2640 mm STEEL SHEET 1.2 mm Up to 30% higher bending capacity for non-ferrous metals Bending beam: 24 mm Bending angle: 145 degrees Weight: 350 kg Cutting across the entire working length Lifting the upper beam in three stages Maximum clear opening between beams: 80 mm Rear support frame for holding sheet metal, angle gauge, degree scale, gas pressure damper Front cutting gauge for ensuring preset cutting widths Payment terms: Cash on delivery Price: €2,400 Delivery costs: €240 Delivery time: Every week Rotary shear 0.8 mm for an additional €350 We look forward to hearing from you! Invoices are issued with 0% VAT as intra-community delivery or with an additional 19% VAT.

Stav: takmer ako nový (použitý), Rok výroby: 2017, The cartons are taken from the outfeed conveyor of the folding box machine, manually stacked, and pushed onto the infeed conveyor of the US-2000 TRC 900. Within the system, the stack is precisely aligned three times using side guides and a front stop, then pressed and banded. For the second banding process, the front stop automatically moves to the next position, which can be set via the display. A servo-driven conveyor motor allows for individually adjustable strap tension, ensuring edge-protecting banding of high-quality carton stacks. Throughput of up to 22 stacks per minute. Psdsvcyw Ajpfx Apxjgk

Stav: použitý, The semi-automatic capping machine RLC1 is suitable for sealing glass bottles with 26 or 29 mm crown caps. Pgedpex Iv Tijfx Apxek The closing unit can be used with crown caps of 26 or 29 mm diameter. If both diameters are required, an additional closing unit will be supplied. The crown cap closing head is made of hardened steel and is wear-resistant even over time. The guide rail positions the crown caps correctly. The specific shape of the rail is custom-built for stainless steel 304 crown caps. It holds a small number of caps, which can be manually inserted. The closing unit retrieves crown caps from the rail and places them into the capping cone. In compliance with EU regulations, the capping process starts by simultaneously pressing two buttons. After positioning the bottle in the holder, the capping process begins; the closing unit descends onto the bottle and seals the crown cap, then automatically returns to its initial position. Dimensions: L 0.41 m, H 1.96 m, W 0.41 m Weight approx. 80 kg Weight with automatic hopper: 140 kg Max bottle diameter: 220 mm; usable height max: 500 mm

Stav: pripravené na použitie (použité), Funkcionalita: plne funkčný, číslo stroja/vozidla: UB421, najazdené kilometre: 154 542 km, výkon: 95 kW (129,16 k), prvá registrácia: 01/2009, typ paliva: nafta, pohotovostná hmotnosť: 4 010 kg, maximálna hmotnosť nákladu: 1 990 kg, celková hmotnosť: 6 000 kg, konfigurácia náprav: 4x2, ďalšia kontrola (TÜV): 01/2027, palivo: nafta, farba: oranžová, typ prevodu: automatický, emisná trieda: Euro 4, počet sedadiel: 6, dĺžka ložného priestoru: 2 950 mm, šírka ložného priestoru: 2 200 mm, výška ložného priestoru: 1 450 mm, Výbava: ABS, airbag, naklápacia vozík, posuvné dvere, sadzový filter, uzávierka diferenciálu, MB Vario 613 D Tipper Double cab with 6 seats Pjdpfjrpmwkox Apxsgk Vehicle from first owner Ex-municipal / government vehicle Low emission Euro 4 (BlueTec4) Green environmental sticker Automatic transmission Twin-tired rear axle Rear axle differential lock Former city service vehicle Amber beacon lights Isri comfort driver’s seat Power steering Driver airbag Electric exterior mirrors Radio with CD Roof hatch (Swedish hatch) Load bed dimensions in mm L: 2150/2950 W: 2200 H: 1450 The load bed is divided into two compartments: 1x 2150L, 1x 800L, but can be converted into one loading space – then 2950L Payload: 1,990 kg Unladen weight: 4,010 kg Gross vehicle weight: 6,000 kg Wheelbase: 3,700 mm Immediately operational Errors, changes, and prior sale reserved We sell exclusively according to our terms and excluding any warranty whatsoever. Errors, changes, and prior sale reserved. We are available continuously Monday to Friday from 9:00 am to 5:00 pm, Saturday by appointment. Outside these opening hours, appointments can be arranged by phone. We are happy to accept your current used equipment/vehicle as trade-in. Priority is given to sales to commercial customers and exporters; this applies to our entire vehicle inventory. The information given above is non-binding, subject to errors, changes, and prior sale!

Stav: použitý, Funkcionalita: plne funkčný, číslo stroja/vozidla: UB421, najazdené kilometre: 154 542 km, výkon: 95 kW (129,16 k), prvá registrácia: 01/2009, typ paliva: nafta, pohotovostná hmotnosť: 4 010 kg, maximálna hmotnosť nákladu: 1 990 kg, celková hmotnosť: 6 000 kg, konfigurácia náprav: 4x2, ďalšia kontrola (TÜV): 01/2027, palivo: nafta, farba: oranžová, typ prevodu: automatický, emisná trieda: Euro 4, počet sedadiel: 6, dĺžka ložného priestoru: 2 950 mm, šírka ložného priestoru: 2 200 mm, výška ložného priestoru: 1 450 mm, počet predchádzajúcich vlastníkov: 1, Výbava: ABS, airbag, posuvné dvere, sadzový filter, uzávierka diferenciálu, MB Vario 613 D Tipper Double cab with 6 seats Vehicle from first owner Ex-municipal / government vehicle Low emission Euro 4 (BlueTec4) Green environmental sticker Automatic transmission Twin-tired rear axle Rear axle differential lock Former city service vehicle Amber beacon lights Isri comfort driver’s seat Power steering Pedpfx Apog R Nzwjxegk Driver airbag Electric exterior mirrors Radio with CD Roof hatch (Swedish hatch) Load bed dimensions in mm L: 2150/2950 W: 2200 H: 1450 The load bed is divided into two compartments: 1x 2150L, 1x 800L, but can be converted into one loading space – then 2950L Payload: 1,990 kg Unladen weight: 4,010 kg Gross vehicle weight: 6,000 kg Wheelbase: 3,700 mm Immediately operational Errors, changes, and prior sale reserved We sell exclusively according to our terms and excluding any warranty whatsoever. Errors, changes, and prior sale reserved. We are available continuously Monday to Friday from 9:00 am to 5:00 pm, Saturday by appointment. Outside these opening hours, appointments can be arranged by phone. We are happy to accept your current used equipment/vehicle as trade-in. Priority is given to sales to commercial customers and exporters; this applies to our entire vehicle inventory. The information given above is non-binding, subject to errors, changes, and prior sale!

Stav: nový, Rok výroby: 2025, Full-automatic high-speed carton erector for an efficient, rapid, and thus economical packaging process. The carton is automatically picked from the magazine, erected, and sealed at the bottom (in one direction). The side-positioned boxes are then conveyed out for collection. - Specifications: PLC controlled, operation via touch monitor; carton size in mm: L(130-280)xW(80-200)xH(80-200); max. machine cycle rate (idle): 20 cycles/minute; magazine capacity: H = 600mm; power supply: 110/220V, 1kW; compressed air: 5-8 bar, 0.3m³/min; tape width in mm: 36/48; machine dimensions: L1680xW1210xH1260mm; weight: 700kg. Please note that our new prices are often below standard used machine prices. Feel free to contact us and describe your packaging requirements. – We generally have 30-50 different new machines immediately available from stock. For custom-built machines, we offer very short delivery times from approx. 3 weeks. – All machines come with a full warranty. Pgodpfx Ajv Nkvvjpxok

Stav: nový, Rok výroby: 2025, Sample system for counting and packaging small metal products or hardware items in flat bags with a longitudinal back seam. The weighing and counting system with a vertical form-fill-seal machine is suitable for small metal products such as nails, screws, nuts, bolts, washers, etc. The iron and metal products are conveyed to the weighing and counting system via a magnetic conveyor belt and are then packaged in flat bags. – Specifications of the weighing-counting-packaging system: max. machine cycle rate (idle): 8 cycles/minute; bag dimensions: max. L200xW300mm; power supply: approx. 2kW, 220V; compressed air: 0.2m³/min, 6-8bar. The system can be extended to count and package different products in one bag. The stated specifications refer to the sample packaging system. The final machine dimensions and total price depend, among other factors, on the required packing speed, the products to be packaged, and the bag size. Pjdpfov Nmhzex Apxogk Please note that our new prices are often below the usual prices for used machinery. Feel free to send us an inquiry and specify your packaging requirements. - Normally, 30-50 different new machines are available from stock for immediate delivery. For customer-specific machines, we also offer very short lead times of approx. 3 weeks. - All machines are supplied with a full warranty.

Stav: nový, Rok výroby: 2025, Vertical packaging machine specifically designed for the cosmetics industry, suitable for producing round sachets as well as 4-side sealed double-chamber sachets. Completely round-edge sealed sachets are produced two per cycle. Changing the sachet type requires a time-intensive format change and technical expertise. Included is a dosing pump for creams, fluids, etc., selected according to the customer’s product requirements, which then determine the individual specifications. PLC and LCD touchscreen from Siemens, automatic program setup, print mark sensor, SS304 stainless steel version including hot embossing unit (for production date, etc.). – Specifications: Sachet size: customized; film roll width: max. 320 mm; suitable for composite and mono-layer aluminum, PE, BOPP, and PP films, and paper; machine cycle rate without product: 40 cycles/minute (equals 80 round sachets or 40 double-chamber sachets); 220V/2.5kW; 6 bar, 0.3 m³/min. Pgedpfxov Nmyqe Apxjk Please note that our new prices are often below the usual prices for used equipment. Feel free to contact us and let us know your packaging requirements. -- We generally have 30–50 different new machines available from stock at all times. For machines built to customer specifications, we offer very short delivery times, starting from approx. 3 weeks. -- All machines come with full warranty.

Stav: nový, Rok výroby: 2025, prevádzkové hodiny: 3 h, Funkcionalita: plne funkčný, posuv osi X: 7 m/min, hmotnosť obrobku (max.): 1 000 kg, pracovná šírka: 2 500 mm, objemový prietok: 8 000 m³/h, rok poslednej generálnej opravy: 2025, celková hmotnosť: 3 200 kg, typ vstupného prúdu: trojfázový, priechodová výška: 210 mm, celková výška: 2 350 mm, celková dĺžka: 2 450 mm, celková šírka: 3 500 mm, pracovná výška: 950 mm, Ceetec DuoFlex Spray – The Coating Machine for Joiners, Furniture Makers, CLT and Glulam Suppliers, and Much More. Wherever a solid, straightforward yet exceptionally well-equipped machine is needed, the DuoFlex Spray Automatic Flatbed Sprayer comes into play. Coating can be so simple—not only when you have a robust, long-lasting coating machine (made in Denmark, electronics from Germany such as Beckhoff and others), but especially one that puts you, the operator, at the center: Everything is intuitive and easy to use, yet you benefit from features you’ll search for in vain—or only find in much higher price segments—on other machines. Here are some key facts about the DuoFlex Spray automatic flatbed sprayer: 1. Paint changeover in just 3–5 minutes 2. System volume only 2.5–3L of paint/lacquer 3. Suitable for solvent-based and water-based materials 4. Two fully separated circuits: For water/solvent or clear coat/coloured lacquer 5. Maximum reproducibility: Thanks to intelligent programs that automatically save ALL vital parameters. 6. Easy to learn: After just 4–6 hours of training, even a baker can spray better than a manual painter with 10 years of experience. 7. Modular expandability: Drying system, sanding automation, pre-heating, robotic handling – all from one source. 8. Service: We know our field. Our owner was a coatings manager for almost 10 years and brings this hands-on expertise to ensure your success even after purchase. The machines are extremely robust and durable, but should anything arise, we maintain a well-stocked spare parts warehouse in Germany and Denmark. DuoFlex Spray Coating Machine Processing Dimensions: 1. Standard: 1,300 mm width x 200 mm height 2. Larger: 1,800 mm width x 200 mm height 3. Up to: 3,200 mm width x 330 mm height Length: From 250 mm to virtually unlimited. If you wish to coat GLT ceiling panels that are 16, 18, or 20 meters long, we simply build the right automation solution for you. Does that sound interesting? Would you like to try the machine in our technical center? Do you have specific requirements and are unsure if we can meet them? Then I would be pleased to assist you personally! Pgedpfxeffc Tys Apxjk Sincerely, Martin Bruhn Owner, Bruhn Coating Systems // Exclusive Sales Partner for ceetec A/S – Middelfart, Denmark.

Stav: dobrý (použitý), Rok výroby: 2020, prevádzkové hodiny: 200 h, Funkcionalita: plne funkčný, celková výška: 4 820 mm, celková šírka: 15 000 mm, celková dĺžka: 20 000 mm, typ vstupného prúdu: Klimatizácia, vstupné napätie: 400 V, SOCO SYSTEM End-of-Line Packaging Line with Robot Palletizer, Carton Erectors & Sealers (Year of Manufacture 2020) This offer includes our complete SOCO SYSTEM shipping and end-of-line packaging line, exactly as it was installed in our facility. The system is fully functional, well-maintained, and was used up until recently for pallet shipping. This line is ideal for businesses with high shipping or packaging volumes that require automated, efficient, and modular packaging processes. The system can be acquired in whole or in part upon request – we are happy to provide consultation for optimal configuration. Technical Specifications / Components Pgjdpfx Apsxdb Saoxok 2 x Carton Erectors BE-2300 ATS and BE-2200 ATS Automatic carton erectors for folding and gluing bottom flaps (self-adhesive tape B = 50 mm). Longitudinal Flap Opener For precise feeding and alignment of cartons on the main conveyor. Powered Conveyor & Labelling Lines Roller conveyors, curves, and distribution sections with integrated label application. Carton Sealer T-4000 with Tape Alarm Automatic sealing of carton tops with self-adhesive tape. Labeller LOGOPAK Logomatik 415-T (integration ready) Transfer for automatic carton labelling and inspection via scanner. Palletizing Robot SOCO PRS-LRS-1218-H3 Industrial robot for fully automated palletizing according to custom patterns. Pallet Magazine for 14 Pallets Automatic provision of empty pallets. Safety Equipment: Swing doors / light curtains, emergency stop interlocking, Type 2 control, controller, CE certification. Additional Modules: T-55 with conveyor and ball table, F-100 + T-2000 conveyor systems, custom RAL 9006 finish. Complete installation, factory pre-commissioning, assembly, and commissioning included (original system price according to SOCO SYSTEM quote: €243,700). Function Description The line automatically erects cartons, tapes the base, feeds them onto the main packaging conveyor, closes the top, labels and inspects them. Faultless cartons are then picked up by the robotic palletizer and stacked according to predefined pallet layouts. The entire system is modular and can be integrated into existing production or shipping workflows. General Information Year of manufacture: 2020 Manufacturer: SOCO SYSTEM A/S Condition: used / very good / immediately available Location: Norderstedt (near Hamburg) Scope of delivery: complete shipping line including robot, sealer, and conveyor technology

Stav: dobrý (použitý), Rok výroby: 2020, prevádzkové hodiny: 200 h, Funkcionalita: plne funkčný, celková šírka: 700 mm, celková dĺžka: 800 mm, celková výška: 2 297 mm, typ vstupného prúdu: Klimatizácia, You will find this and other machines that were part of our shipping line in our listings. If you are looking for a complete solution in this area, or just need several components, please feel free to contact us and we will get back to you promptly. Brief overview of the shipping line and where the offered item was used: The shipping line was used for pallet dispatch. That means cartons were erected (SOCO ATS 2300 + 2200) and sealed at the bottom, then packed on the main shipping line. The finished packages were sealed at the top by a carton sealer (SOCO T-4200) and transferred to a labeler (LOGOPAK LOGOMATIC 415-T). Once the Logomatic scanner approved the parcels, they were passed on to the palletizing robot (SOKO PRS-LRS-1218-H3) to assemble a pallet according to our specified sizes. In our video, you can see the entire shipping line in operation. The item for sale is the LOGOMATIC 415-T labeler from LOGOPAK (marked in the blue circle in the layout image). Summary of all relevant technical specifications for the LOGOMATIC 415 T labeling system: • Machine type: LOGOMATIC 415 T • Print resolution: 300 dpi (12 dot) • Cycle rate: Maximum 20 products per minute • Operation: HMI (10-inch color LC display) in German • Signal lamp: 3-color status indicator (red, blue, green) available • Frame: Standard frame with stainless steel spindle-mounted feet (±50 mm adjustable) • Certification: CE certified (EU) • Power supply: 230V AC / 50 Hz (L,N,PE). The supply voltage should not fluctuate by more than ±5% and must be free from interference. • Power consumption: Maximum approx. 1400 VA • Power connections at installation site: 1x Schuko socket for the labeler and 1x Schuko socket for maintenance purposes • Compressed air: 6 bar, dry and oil-free. The air supply must be permanently installed up to approx. 1 meter before the device • Compressed air consumption: Approx. 250 l/min • Compressed air connection: ½'' fixed line with FESTO quick coupling KD4-½-A and coupling plug KS4-CK-6 Pgodpfx Apexdcv Hsxjk • Temperature: Ambient temperature for the labeler should be between +5°C and +37°C. For processing PE labels, a temperature of 25°C is recommended • Applicator stroke length (net): 350 mm, defines the working range for various carton heights • Labeling height: 800 mm (standard setting) • Orientation: Horizontal, labeling from above • Label unwind/carrier material take-up: For rolls up to 600 m length • Label core adapter: 152 mm (6 inches) • Current format (Amazon): 60 mm width x 40 mm height • Future shipping label: Approx. 100 mm width x 200 mm height (these dimensions can vary, depending on label size needed) • Label gap: 8 mm • Printing process: Thermal transfer • Label material: Paper labels (Paper Economy TT) • Ribbon (TTR): Wax quality • Interface: Ethernet (10/100 Mbit). A serial RS-232C interface is also available • Data protocol: ZPL (Zebra) • Data source: Host system • Data transmission: The data to be printed is sent from a PC via Ethernet to the labeler

Stav: dobrý (použitý), Rok výroby: 1990, prevádzkové hodiny: 12 332 h, Funkcionalita: plne funkčný, číslo stroja/vozidla: 1684, celková dĺžka: 5 000 mm, celková šírka: 2 350 mm, celková výška: 3 500 mm, vstupné napätie: 400 V, typ vstupného prúdu: trojfázový, tlak: 7 lišta, vykurovací výkon: 63 kW (85,66 k), prevádzkový tlak: 7 lišta, BvL cleaning system / washing system Hot wash system Chamber / trolley dimensions: 2200 x 800 x 900 mm Was in operation until 04/25, then cleaned and decommissioned. Pgodew Dpk Hepfx Apxsk Will be dismantled in July 2025. Trolley for suspending components included. Various spare parts are available and included in the sale. See drawing and photos for more details. For further information, please feel free to contact me.

Rok výroby: 2024, stav: nový, Funkcionalita: plne funkčný, číslo stroja/vozidla: PM150, Operation: The autoclave basket is inserted into the machine by the operator and then locked in place. A scissor lift system is used to load or unload the autoclave cages layer by layer. The modular design allows for a combination of manual, semi-automatic, and fully automatic systems. Operation is performed via two-hand control. Loading and unloading systems can be combined with the following components: - Infeed conveyor and turntable - Indexing conveyor with magnetic plate - Transfer plate Pedpet Ix T Aofx Apxogk Equipment options: All machines are customized to meet individual requirements. Please do not hesitate to contact us.

Stav: použitý, číslo stroja/vozidla: 1433A, najazdené kilometre: 52 734 km, výkon: 90 kW (122,37 k), prvá registrácia: 07/1994, typ paliva: benzín, kombinovaná spotreba paliva: 14 l/100 km, farba: zelený, typ prevodu: automatický, emisná trieda: euro1, Výbava: pohon všetkých kolies, prípojné zariadenie, TÜV and emissions inspection (AU) will be newly done, and you’ll get a green environmental badge :-) Special army version with long wheelbase, this Mercedes G is in excellent condition—bodywork is also in superb shape (almost like new! Unbelievable how the Swiss keep them)! The hardtop is made of plastic, the interior dimensions are L/W/H 1760/1520/1550 mm. Ready for immediate use, coming directly from the military, very well maintained and serviced! Features include: 2850 mm wheelbase, 4-speed automatic transmission plus low range, all-wheel drive, one G is equipped with a military trailer hitch (this will not be approved by TÜV, but for €250 we can fit a ball hitch with up to 3,500 kg towing capacity), 4-cylinder petrol engine with 2299 cc displacement, fuel consumption on the motorway is about 13 L/100 km and just under 15 L/100 km on short trips (info from my customers), rear axle differential lock; several of these G-models are in stock—truck registration is also possible (then only 2 seats in the front), good tires 205R16, and much more. We also have some accident vehicles in stock at attractive prices! Ideal as a rally or hobby vehicle. I also have the appropriate single-axle off-road trailer with overrun brake for the G; various other all-wheel-drive and military vehicles are available as well. All my vehicles are listed on my website padh. So, you’re running back and forth across Germany from Flensburg to Berchtesgaden to look at different vehicles, but here you’ll find over 150 vehicles of the following types: Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc.—all available with TÜV! Plus, there’s an unbelievable range of spare parts and accessories. Why settle for less? Call me: 0049 (0)2248. Best regards, your Philipp from Hanfbachtal. Pgedoqx Sx Nopfx Apxok

Stav: použitý, číslo stroja/vozidla: 1391A, najazdené kilometre: 6 678 km, výkon: 90 kW (122,37 k), prvá registrácia: 05/1995, typ paliva: benzín, spotreba paliva (mestská prevádzka): 14 l/100 km, farba: zelený, typ prevodu: automatický, emisná trieda: euro1, Výbava: centrálne zamykanie, pohon všetkých kolies, prípojné zariadenie, TÜV and AU will be renewed and the vehicle receives a green environmental badge :-) Special army version with long wheelbase, this Mercedes G is in excellent condition, the bodywork is also in excellent condition (almost like new! ! ! It's unbelievable how the Swiss maintain their vehicles), the convertible top can be quickly converted from a passenger car with 8 seats to a pick-up with 2 seats, the odometer readings range from 1,461 km to 85,429 km (read from display), approximately 10 vehicles of this specification are in stock, interior dimensions are L/W/H 1760/1520/1250 mm, immediately operational, directly from the military, very well maintained and serviced! Equipped with: 2850 mm wheelbase, 4-speed automatic transmission plus low-range gearing, all-wheel drive, one vehicle features a military trailer coupling, TÜV will not approve for trailer operation, but on request, a ball hitch can be supplied for an extra €250, 4-cylinder petrol engine with 2,299 cc displacement, fuel consumption on the motorway is approx. 13 liters per 100 km and just under 15 liters on short trips (according to customer feedback), rear axle differential lock, (truck registration possible, then only 2 front seats), good 205R16 tires, and much more. We also have some accident vehicles in stock at attractive prices! Ideal as a rally or hobby vehicle, also perfect for hunting. Also available is a matching single-axle off-road trailer with overrun brake. Several other all-wheel-drive and military vehicles are still available. All my vehicles can be viewed on my website. So, instead of rushing back and forth across Germany to check out different cars, here you find over 150 vehicles including: Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Class, Mowag, Mercedes-Benz, etc., all with TÜV! In addition, an unbelievable number of spare parts and accessories are available. Why would you... Pjdpfx Aoqx Sxhspxegk

Stav: nový, maximálna hmotnosť nákladu: 25 300 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website. Selection of equipment. Full equipment details available upon request. Gooseneck * Gooseneck in SNT design to optimize loading platform length * Length approx. 3,750 mm, hydraulically liftable/lowerable and detachable gooseneck * Technical fifth wheel load: 25,000 kg. Suitable for tractors: 4 x 2 and 6 x 2 Beam Deck * Lowbed designed as an extendable vessel bridge in SUPER LOW design * Length approx. 6,850 mm * With mechanical locking * Supply lines are protected within the extendable beams and automatically adjust to the respective lowbed length Rear Chassis * Short version with closed outer frame and checker plate covering * Chassis includes an excavator trough, which is closed at the rear half to accommodate the air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tyres. Load index 143/141J (146/146F) Braking System * Brand: WABCO, EBS-E according to EU regulations, WITHOUT connecting cable to the tractor unit Paintwork * 6-stage final treatment * Complete steel structure shot-blasted after welding * 1 coat of zinc primer * 1 coat of adhesion primer. Final paint with 2 coats of 2-pack (acrylic) paint in a single color, followed by cavity sealing with special wax Trailer Color * RAL 3002 Carmine red * Rim color: Silver grey * Side wall color: Natural aluminum Included Accessories * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit to control hydraulic operations, except for hydraulic winches. Without installation of supply connections on the tractor * Mounting adapter for 1 spare wheel in front of the gooseneck's front wall * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear bevel of the gooseneck (LC 6,000 daN) * 2" king pin * Hydraulic crossbeam to support the gooseneck on the tractor unit or a dolly * Air connection with air gun on the gooseneck * 1 pair of steel ramps with climbing profiles and locking bolts to bridge the lowbed's hooks * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * On the outer beams of the loading platform, preparation for removable floor panels * Lashing rings with retaining spring approx. every 1,200–1,300 mm outside on the inner beams of the platform * Lashing rings with retaining spring approx. every 1,200–1,300 mm outside on the outer beams of the loading platform (LC 10,000 daN) * Cut-outs on the top flange of the outer beams above the lashing rings * Mechanical pin-tab coupling from lowbed to chassis for exchangeable loading platform or installation of extension beams. Includes electro-pneumatic-hydraulic couplings Pgodjv Sw E Ajpfx Apxsk * Outer beams of the lowbed coated with non-slip sand layer * 2nd driving height for upper drive position, max. ±50 mm from normal driving position, without controls installed on the tractor * 1 pair of lashing rings with retaining spring at the transition from the lowbed to the excavator trough (LC 10,000 daN) * Bevel front and rear a

Stav: takmer ako nový (použitý), Rok výroby: 2013, This floor-standing machine is designed for mixing a large number of dry products. Intensive and homogeneous mixing is achieved due to the planetary movement of the mixing tool. The system consists of a stainless steel container – material 316L mirror polished, Ra < 0.8 µm – and a stainless steel housing that accommodates the container lid with integrated mixing assemblies and drives. The mixing container has a capacity of approx. 90 litres – usable volume approx. 30 to 60 litres – and is placed and fixed onto two arms. The product to be mixed is loaded, and the container is then raised hydraulically, allowing the mixing tool to be immersed in the product. Pgedsx Antuspfx Apxok The mixer is equipped with a stainless steel spiral mixing tool (45°), and the speed can be regulated via a gearbox. The mixing speed is adjustable to 48, 82, 135, and 231 rpm. The container is emptied via a central bottom outlet. Operation and control, including recipe and batch management, is performed via a control panel mounted on a separate stainless steel cabinet. The operating language is English. The system is prepared for use in ATEX-rated (explosion-proof) areas. Electrical specifications: 230/400V, 3 phase, 50 Hz, IP55 Footprint: 90 x 130 x 235 cm Weight: approx. 850 kg

Stav: dobrý (použitý), METTLER TOLEDO TOUCHSGREEN SCALE BUTCHER'S SCALE used Item no.: SEE PHOTO Type: UC3-SPCT-A Rated voltage: 230 V / 50Hz Max 6/15 kg Min 40 g e = 2/5 g -10°C / +40°C METTLER TOLEDO TOUCHSGREEN SCALE BUTCHER'S SCALE SAUSAGE SCALE RETAIL SCALE DELI SCALE COUNTER SCALE DELI COUNTER SAUSAGE COUNTER We can only respond to inquiries regarding this item if you provide a telephone number. €490 net / unit plus 19% VAT. 1 unit currently in stock / available for pickup ex stock 47441 Moers We offer as pictured. Inspection is explicitly offered. More equipment in stock. If you wish to receive an offer, please note the following: We require a complete billing and delivery address as well as a telephone number to prepare a quote. An email address is also essential. We will then prepare an offer. Our bank details are listed on the offer. If you accept, please make payment and we will ship immediately upon receipt of payment. An invoice will be automatically sent to you without delay. If you have any further questions, please contact us. Pgedpsg Dgrxsfx Apxok Best regards JS Trading GmbH General notes: We offer items from various company liquidations, which we describe to the best of our ability and provide meaningful photos. No further information on the item can be provided. You are welcome to inspect the item on Tuesdays and Fridays from 9 a.m. to 4 p.m. by prior appointment. If required, the item can be taken immediately. Unless expressly stated otherwise, this offer concerns USED EQUIPMENT. Items have been visually inspected and are technically in working order as far as possible. All prices are offered here as net prices. All offers ex stock 47441 Moers. If you wish shipping, please contact us to discuss packaging and shipping costs. All dimensions are approximate. Errors in the text and photos expressly reserved. You will find further offers from the gastronomy, warehouse technology, transport trolleys, etc., also in our shop.

Rok výroby: 2003, stav: veľmi dobrý (použitý), Ceramic Pin Press-Fitting Device for Rotor Shafts Operating Principle: Ceramic pins are fed to an inspection station via a vibratory bowl feeder and pneumatic hose, where the position of any potential unilateral bore is checked by an optical sensor. Incorrectly oriented parts are ejected into a collection container by a pneumatic slide. Properly oriented pins are subsequently delivered to the separator of the press-fitting tool via another pneumatic hose. The actual press-fitting process is also performed pneumatically, using a plunger guided by a rolling bearing. Initially, a manually adjustable pressure p1 ensures that the pin is not inserted into the shaft too easily. A second manually adjustable pressure p2 is then used to press the pin to its stop inside the rotor shaft. A disc spring package, preloaded to 5,000 N, prevents excessive force from being applied to the pin and shaft. The rotor shaft must be manually inserted, removed, and clamped into the tool by an operator. This procedure is safeguarded by a light curtain. Construction: Self-supporting press-fitting station for ceramic pins and balls, integrated into a complete system. Rotor Shafts: Diameter: 5 – 20 mm Length: 50 – 200 mm Pjdpoib H U Defx Apxjgk Ceramic Pin: Diameter: 3 mm Length: 5 ± 0.2 mm Cycle Rate: Output: 15 strokes per minute Safety: Safety door with interlock switch Category 4 light curtain Emergency stop Airborne Noise Emission: Continuous sound pressure level at the workstation: 70 dB(A) Electrical Connection: Voltage: 230 V AC Frequency: 50 Hz Fuse: 10 A Compressed Air Connection: Operating pressure: 5 – 7 bar Dimensions: L x W x H = 850 x 950 x 1020 mm Weight: approx. 110 kg Year of Manufacture: 2003 Electrically height-adjustable worktable Documentation and circuit diagrams available

Stav: generálne opravený (použitý), Rok výroby: 2005, pojazdová vzdialenosť osi X: 4 000 mm, zdvih osi Y: 3 000 mm, zdvih osi Z: 1 200 mm, 5-axis machining center in gantry design. CYPORT CP 4030 (universal gantry machine with 4x3 meter machining area). Retrofit machine from 2005 (completely overhauled) Working "hand in hand" with you towards retrofit. HIGHLIGHTS • 5-axis simultaneous machining thanks to 2-axis fork milling head with direct drives • Powerful milling spindle with 12,000 rpm • Highly rigid twin gantry for optimum machining results • Large working area with minimal footprint • All-round access to the working area • Tool magazine with 48 positions Travel X/Y/Z: 4,000 / 3,000 / 1,200 mm Gantry clearance Y/Z: 3,280 / 1,400 mm Rapid traverse X/Y/Z: 30/30/30 m/min Feed force per axis: 10,000 N 2-axis NC milling head M 21 (CYTEC): Swivel range A-axis: +/-110° Swivel range C-axis: +/-360° Powerful CYTEC milling spindle: Tool holder: HSK-A 100 Speed: 18,000 rpm Power: 42/53 kW (100%/40% duty cycle) Torque: 201/253 Nm (100%/40% duty cycle) Tool magazine: Number of places: 48 HSK-A100 Max. tool diameter: 105/130 mm Max. tool length: 300 mm Max. tool weight: 8 kg CNC: HEIDENHAIN iTNC 530 5-axis path control Wireless electronic handwheel HR 410 Coolant system: Tank volume: 800 L External coolant supply: 20 bar Internal coolant supply: 40 bar Paper band filter Coolant/air blast switching, external Workpiece measuring system: Probe M&H - wireless technology Documentation CE certification Retrofit scope: NEW COMPONENTS New ball screws All bearings replaced New linear guide carriages New tool changer New counterbalance cylinders New lubrication distributors All cables and lines replaced All hoses replaced New bellows New PVC lamellae New safety bumpers Electrics (switches, relays, contactors, etc.) replaced New safety glass New paintwork RECONDITIONED COMPONENTS C-axis A-axis Motor spindle Drive motors Hydraulic unit Hydraulic valves Complete pneumatics * All wear parts within assemblies are replaced by new components. Afterwards, component condition meets the quality standards of the Exchange Program. REFURBISHED COMPONENTS Machine table Slider / Z-ram X and U carriages Y-carriage Y-beam Energy chains and cable carriers Coolant system Central lubrication Sheet metal covering Pedpfx Apjivn Euexsgk All structural components have been checked, sandblasted, ground/scraped, measured and then repainted. The accuracy of these parts is equivalent to new machines. Machine can be inspected anytime. For over 30 years, EDEL Werkzeugmaschinen GmbH has been manufacturing high-precision machine tools for the complete machining of highly complex workpieces with uncompromising attention to detail. Our machine capabilities range from cutting high-strength materials, to aluminum or plastics. The product portfolio includes 5-axis and 6-axis universal machining centers, 7-axis portal milling machines, and gantry machines for workpieces up to 7 meters long. MADE IN GERMANY

Stav: použitý, Rok výroby: 2011, Funkcionalita: plne funkčný, číslo stroja/vozidla: L3B031, IMA MISTRAL Y 16 bottle/can blowing-out machine – Used, immediately available Machine data: Model: IMA MISTRAL Y 16 Type: Automatic bottle/can blowing-out and extraction machine Serial number: L3B031 Year of manufacture: 2011/2012 Manufacturer: IMA S.p.A. / IMA Swiftpack (Italy) Electrical equipment: 220/380 V, 3 phases, 50 Hz Space requirements: approx. 400 × 140 × 220 cm Description & key features: The rotary blowing-out machine is designed for pharmaceutical and medical applications and is suitable for GMP-compliant internal cleaning of stable, round glass or plastic bottles using sterile compressed air. - Fully automatic bottle cleaning and extraction - Processing of up to 200 containers/minute - Including format sets for plastic bottles Ø 44 mm × height 95 mm - Additional format sets included: Ø 40 × 55 mm, Ø 60 × 130 mm Operating principle: Bottles are fed in single file via a conveyor belt and screw, separated, transferred into a carousel, gripped with tongs, rotated 180°, and cleaned with nozzles (blowing out) and suction heads (extraction). The bottles are then transferred to the conveyor and the downstream machine. - Suitable for bottles and cans made of plastic and glass - High degree of automation, GMP-compliant design Documentation & papers: - Operating manuals (German, English, Italian) - Electrical diagrams - Layout drawings / Guards layout - Spare parts catalogue - Blowing diagram / Electric diagram - FAT and SAT documents - Machine and operating manual in German Scope of supply: - Complete machine - Spare parts as per catalogue - All original documentation (PDFs and printed documents) - Format parts for various bottle sizes Condition: - Used, from pharmaceutical production - Ready for immediate use after installation Pgodpfjw Sfa Ejx Apxok - Immediately available Location: Çorlu, Turkey Price: On request