Then - kúpiť použité (172)

Stav: nový, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, 3-axle MULTIMAX PLUS low-bed semi-trailer, air-suspended and with hydraulically forced-steered axles. Technical data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Speed: 80 km/h (legal) Gross vehicle weight: 49,500 kg (depending on fifth-wheel load) Fifth-wheel load: 18,000 kg Axle load: 31,500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm Turning radius king pin to rear approx.: 2,100 mm Fifth wheel height loaded approx.: 1,205 mm Loading platform length approx.: 9,600 mm Extendable by approx.: ? Platform width approx.: 2,540 mm Loading height (max. loaded) approx.: 890 mm Suspension travel approx.: -55/+145 mm Axle spacing: 1,360 mm Gross weight dependent on fifth-wheel load: Yes Special permit required if national legislation is exceeded. Technical description Gooseneck: Gooseneck in SNT design for optimized platform length, approx. 3,900 mm in length, rear with bevel approx. 1,000 mm x 6°. Technical fifth-wheel load: 18,000 kg. For tractor units: 4 x 2 and 6 x 2. Platform: Platform approx. 9,600 mm long with rear ramped bevel approx. 900 mm x 6°. Platform section after gooseneck is hydraulically liftable and lowerable, length approx. 3,000 mm, loadable up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS One pair of two-part AXS steel ramps, approx. 4,920 mm long and approx. 900 mm wide. Open grid surface. Hydraulic folding ramp ends. Each ramp hydraulically adjustable outwards by approx. 235 mm and inwards by approx. 365 mm. Max load and gradient as per data sheet: C470319 Maximum incline with lowered platform: 9° Axles and suspension: BPW axles and suspension, all axles hydro-mechanically forced-steered. Technical axle load: 12,000 kg Air suspension with lift and lower valve. Axle tools. Tyres: 235/75 R 17.5 3PMSF twin tyres. Brand at our discretion. Load index 143/141J (144/144F). Brake system: Braking system by WABCO EBS-E, in accordance with EU regulations. No connection cable to tractor unit. Lighting: 24V lighting system “ASPÖCK-NORDIK full LED” compliant with EU regulations. (ASS 3) Metallisation: Complete HRM metallization (High Resistance Metallisation) Entire steel construction shot-blasted, then finished with ZINACOR 850 (Zinc 85% - Alu 15%). Paint finish (6-stage final treatment): Complete steel structure shot-blasted after welding. 1 layer zinc-based primer, 1 adhesion primer layer. Final finish with 2 layers of 2-component paint (acrylic), single color in RAL color of choice, then cavity sealing with special wax. Rims in silver. Multi-color and special paint at extra cost. Steel construction: Made from high-strength fine-grained steel. Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa). Welders certified DIN-EN 287-1. MAG welding as per EN ISO 4063. Shielding gas M21 as per EN ISO 14175 Front wall: Steel, removable, approx. 400 mm high. Supply line junction box to tractor unit, fitted at the level of the outer frame profile. ASPÖCK-UNIBOX at front junction rail with sockets: 24N, 24S & 15-pin. 24N connection as per ISO-1185 24S connection as per ISO-3731 15-pin as per ISO-12098 If your pin configuration deviates from ISO standards, please inform us. Hjdoizu Ntepfx Aa Uel “Anderson” socket on front junction box (Rema 78051-00 and Amp. 150 V.) Cable for supply of the electro-hydraulic pump unit and/or electric winch (35 mm²,

Rok výroby: 2026, stav: nový, Stoning and pulping system with interchangeable screens and adjustable rotor. Suitable for pulping stone fruits, various fruits, and berries. The pulp and stones are discharged separately. Screens can be changed easily and quickly. The unit is supplied with one screen; additional screens can be ordered as required. Hedpfxod Aqzdj Aa Uol Technical Specifications: - Rated capacity: 1,000–5,000 kg/h - Power requirement: 11 kW, 400 V, 32 A, three-phase - Material: Wnr. 1.4301, AISI 304 stainless steel - Dimensions: 1,450 x 1,650 x 1,850 mm - Discharge height: 300 mm - Feed height: 1,750 mm - Weight: 190 kg - IP65 electronics - Machine complies with EU directives - Minimal maintenance - Easy to operate - Effortless to clean - 2 swivel castors and 2 fixed castors / 4 vibration-free machine feet - Food-grade rubber scrapers The machine features two operational zones: fruit is destoned in the first section, then pulped in the second. Price includes one selected screen. Options: - DN 65 connection for mash pump - Frequency converter - Screens: - 0.8 mm: Berries - 1.5 mm: Berries, purée - 3 mm: Apple, pear - 5 mm: Cherry, sour cherry - 8 mm: Plum, apricot - 10 mm: Peach - Custom manufacture

Rok výroby: 2026, stav: nový, The fruits are transferred by the sorting table into the washing tank and then further transported to the washing brushes, where the first cleaning phase begins. Using the conveyor belt, the fruits are conveyed under the fresh water shower to the swing-type grating mill, where the desired fineness of processing for the fruit or vegetables takes place. Thanks to the swing-type grating mill, the system can also be used purely as a washing and conveying unit without conversion. Technical data: • Rated capacity: 1500–2000 kg/h • Power requirement: 4 kW, 400 V, 16 A three-phase • Material: Wnr. 1.4301, AISI 304 stainless steel • Dimensions: 950 x 3160 x 2000 mm • Discharge height: 1250 mm • Weight: 275 kg • Washing tank water capacity: 280 L/shift • Water consumption: 100–200 L/h (depending on settings) • Water connection: ¾” quick coupling • IP65 electrical control box • Machine complies with EU directives Hedpod Aqnfofx Aa Uel • Minimal maintenance required • Continuously adjustable belt speed • Easy to operate • Effortless to clean • Adjustable machine feet • Swing-type grating mill • Noise emission: 60–70 dB • Equipped with 4 counter-rotating brushes for intensive washing Optional: • Different sieve inserts for the grating mill • Stop&Go system for automatic control between the belt press and the washing/grinding unit • Dosing attachment for pack presses Available to order without fruit pulp mill!

Rok výroby: 2026, stav: nový, MDK 3000 Brush Washing Machine with Musher The unwashed fruit is fed in at the intake; following pre-washing, it is then further cleaned by another fresh water spray on the conveyor belt. Easy to clean, equipped with rugged, food-grade polypropylene/acetal modular belts with infinitely variable belt speed in both directions. Features two steerable castors and two fixed castors, or anti-vibration feet as an option. Requires minimal maintenance. Technical Data: - Rated capacity: 3,000 kg/h - Power requirement: 5 kW, 400 V, 16 A, three-phase - Material: Stainless steel Wnr. 1.4301, AISI 304 - Dimensions: 4300 x 1250 x 2222 mm - Discharge height: 1,370 mm - Weight: 420 kg - Wash tank water capacity: 800 L per shift - Water consumption: 100–200 L/h (depending on settings) - Water connection: ¾'' quick coupling - IP65 electronics - Musher equipped with a robust hammer (also suitable for beetroot and quince) - Rätzmühle: the grating mill can be deactivated electronically, enabling use also for stone fruit - Features 4 counter-rotating brushes for intensive washing - Rotating paddle to push fruit towards the conveyor belt Hodpfofd E R Uex Aa Ujl Options: - Different sieve inserts for the grating mill: for desired fineness of fruit and vegetables - Stop ‘n’ Go system – sensitive sensor enables the fruit washer and any type of belt press to work together without clogging - Adaptive electric valve – the fresh water jet activates only when the conveyor belt is running - Air injection – with nozzles and a fan at the bottom of the tank for intensive washing - Air knife – removes water from the fruit surface, minimizing water carryover into the final product - Circulation pump with filter – ensures optimal flow in the wash tank

Rok výroby: 2026, stav: nový, Technical Data: - Capacity: 500 L/h (when heating from 20°C to 80°C) - Power requirement: 48 kW, 400 V - Material quality: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 750 x 1950 x 1170 mm - Weight: 350 kg (without heating medium) - Heating medium: water (soft) - IP65 certified electronics - Connections: DN25 union fittings - with level indicator Hjdpjfdz Dkjfx Aa Uel Temperature control is provided at two points in the heating medium and once at the product outlet. The machine automatically regulates the heating medium temperature. It is fully automatic. If the temperature of the juice to be pasteurized falls below the desired setpoint, the output side of the machine is deactivated and the juice circulates in the bypass system until the temperature reaches the preset level. The unit then resumes loading. At the end of operation, the tube coil can be cleaned very easily using a sponge ball. It requires only minimal maintenance.

Rok výroby: 2026, stav: nový, The pasteurization system is fully automated via an industrial control unit and touchscreen operation. If the temperature of the juice to be pasteurized drops below the desired level, the machine's output side is deactivated and the juice is recirculated via a bypass until the required temperature is re-established. Filling can then resume. At the end of operations, the tubular coil can be easily cleaned using a sponge ball. Our system is low-maintenance. ⚙️ Technical Information Hodpev Srl Rsfx Aa Uol Nominal capacity: 400 L/h Power requirement: 27 kW, 400 V, 40 A Material: Wnr. 1.4301, AISI 304 stainless steel Water buffer tank: 80 L Dimensions: Length: 760 mm Width: 714 mm Height: 1,637 mm Weight: 170 kg Optionally available with filling units

Rok výroby: 2025, stav: nový, SPECIAL OFFER! Washing system with hammer mill + destoning unit IWR2000 Washing system with hammer mill for fruit and vegetables. The unit is manufactured entirely from stainless steel and features a sorting grate, washing tank, and conveyor belt. The produce is dropped into the water and, after a pre-wash, is transported further by the conveyor where it is thoroughly cleaned with fresh water. The cleaned fruit is then conveyed into the mill, where you can select the desired sieve to achieve the preferred mash consistency. • Easy to clean • Minimal maintenance required • Infinitely variable belt speed, adjustable in both directions • Equipped with 2 swivel casters • Equipped with 2 fixed wheels Technical specifications Capacity: 2,000 kg/h Power requirement: 3 kW, 400 V, 10 A Mash discharge height: 1,400 mm Connection for washing tank: G 6/4” Connection for cleaning: G ½” Material: Grade 1.4301, AISI 304 stainless steel Water consumption: approx. 12 L/min Dimensions: Length: 2,700 mm Width: 840 mm Height: 2,270 mm Weight: 150 kg IPE4MAX The destoning and pulping unit is suitable for processing fruit and vegetables. It features interchangeable sieves and an adjustable rotary rotor, designed to pulp or destone stone fruit, pome fruit, as well as a variety of other fruits and berries. The fruit flesh and pits are discharged separately. Sieves can be quickly and easily exchanged. Supplied with one sieve; additional sieves are available as options. • Food-grade rubber scraper • Gap between sieve and scraper adjustable • Mobile machine feet/castors with brake Technical specifications • Capacity: up to 4,000 kg per hour • Power requirement: 4 kW, 400 V, 16 A • Material: Grade 1.4301, AISI 304 stainless steel Sieve sizes: • 0.8 mm: Berries, puree • 1.5 mm: Berries, puree • 3 mm: Apples, pear pulp • 5 mm: Cherries • 8 mm: Plums, apricots • 10 mm: Peaches, mango Hedpfowcl Uljx Aa Ujl Dimensions: Length: 1,130 mm Width: 574 mm Height: 1,138 mm Weight: 125 kg

Stav: nový, Funkcionalita: plne funkčný, Rok výroby: 2026, farba: sivo-čierny, celková hmotnosť: 16 000 kg, maximálna hmotnosť nákladu: 13 800 kg, pohotovostná hmotnosť: 2 200 kg, objem nakladacieho priestoru: 13 m³, šírka ložného priestoru: 2 420 mm, dĺžka ložného priestoru: 6 500 mm, výška ložného priestoru: 800 mm, Dear Sir or Madam, We are offering a new 13m³ roll-off flatbed container for sale. The container features the following specifications: - Standard: DIN 30722-1 - Pick-up height: 1,570 mm - Pick-up bar diameter: 50 mm - Internal container length: 6,500 mm - Internal container width: 2,420 mm - Internal container height: 800 mm - Floor plate: S235 steel (St37-2) with 5 mm floor thickness - Two-piece, spring-assisted drop sides made from S235 steel with 3 mm side wall thickness - All steel exclusively sourced from Thyssen Krupp - Steel parts are automatically shot-blasted prior to processing to optimize further handling and corrosion resistance - External rollers are greasable and replaceable - 5 pairs of recessed lashing rings in multi-lock rails, each rated at 2,500 kg (variable positioning) - 2 front lashing rings, each with a tensile strength of 7,000 kg - Swing tailgate including spring-assisted loading ramp - All stanchions and side walls can be fully and easily dismantled if required! - Front wall height: 1,600 mm - Longitudinal beams: IPN 180 Hedoypb Nwjpfx Aa Ujl - Continuous perimeter net hooks - Painted in RAL 7016 anthracite - The container is fully primed with 120-micron zinc phosphate primer, then finished with a high-quality 2-component paint at 80-micron thickness - Total weight: 16,000 kg / Empty weight: approx. 2,300 kg / Payload: 13,700 kg - Includes nameplate and container inspection in accordance with DGUV Regulation 114-010 (formerly BGR 186) - Warning markings as per §32 (1) StVO & DIN 67520 - Price per unit: €7,500.00 plus VAT - Immediately available Other deck lengths available from stock (4.5m/ 5m/ 5.5m/ 6m) Nationwide delivery available for an additional charge! Should you be interested in other roll-off container products, please feel free to contact us at any time. Subject to errors and prior sale.

Stav: nový, - High level of protection and comfort during welding work. - Particulate filter with spark arrestor, pre-filter, and 5-stage filter saturation indicator that informs the user about the condition of the particulate filter. - Optionally, gas and odor filters can be used for additional protection against common gases, vapors, and unpleasant odors that may arise during welding. Hsdpfowbiq Usx Aa Usl - Automatic airflow control ensures a constant airflow to the head unit at all times. - Immediate visual and acoustic alarm activation if set thresholds are undercut (continuous monitoring of battery capacity and airflow). The Adflo powered air respirator draws in ambient air contaminated with harmful substances, filters it through the appropriate filters, and then delivers the purified air via an air hose to the headpiece. For further information on protection levels and any operational limitations, please refer to the relevant headpiece user manuals. Set: 3M Adflo Starter Kit · 1x Adflo Powered Air Respirator 837730 · 1x QRS Air Hose 834016 · 1x QRS Adapter 533506 · 1x Airflow Meter 838020 · 1x Pre-filter 836010 · 1x Spark Arrestor 836000 · 1x Particulate Filter 837010 · 1x Li-ion Standard Battery approx. 8 hours 837630 · 1x Belt 835000 · 1x Charger 833111 · 1x 3M Versaflo Safety Helmet M306 with comfort face seal and clear polycarbonate visor Lowest price online approx. €1,100 Here for €929

Stav: použitý, Rok výroby: 1995, Funkcionalita: plne funkčný, číslo stroja/vozidla: 35133, šírka podávania: 520 mm, Folding machine GUK K 52/6-KTL-F4 with Gremser flat pile feeder. Hodpswl Nifsfx Aa Ujl 6 folding plates, then 2 buckle plates and one additional folding plate. Paper format: max. 52x86 cm Speed: 30–150 m/min With delivery belt and compressor. In working condition, can be tested.

Stav: použitý, Rok výroby: 2000, Depalletizing and Palletizing System for Euro pallets with PETCYCLE crates. The empty pallets are fed from above via a lift. First, they pass through a pallet securing removal unit, where the empty crates are fixed, the transport securing cord is cut and vacuumed off. The crates are then destacked and conveyed to the bottle ejector. The pallets move on to the pallet magazine/loader. After the pallets are reloaded, they are secured with a cord and transported upwards with the second lift. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call! Machine (additional information): Depalletizing and Palletizing Unloader capacity: 3,600 crates/hr Loader capacity: 3,600 crates/hr Power: 21 kW Voltage: 230/400 V Frequency: 50 Hz Compressed air: 6 bar, 30 Nm³/h Formats: Euro pallet, PETCYCLE crates, 20 x 0.5 L (400 x 300 x 256 mm), 9 x 1.0 L, 6 x 1.0 L, 6 x 1.5 L (300 x 200 x 365 mm) Layer pattern: Mixed stacking, up to 5 layers Running direction: right -> left Operation/control: at the control cabinet, Simatic OP17 / Simatic S7-300 Hodpfx Aex T Ak Sja Uol Material: Housing/frame made of black steel Placement/position: free-standing with floor fixings Equipment: pallet infeed and outfeed, roller conveyors, lifts for 1 x empty and 1 x full pallets, Eurapack pallet securing remover with cord extraction, unloader, pallet magazine, loader, Bornbinder pallet securing unit, safety guard, stairs and platforms, control cabinets

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, číslo stroja/vozidla: Hytronika Steuerung, The control units are in impeccable condition. They were refurbished by ARBURG several years ago and originate from a cleanroom production environment for medical technology. Since then, they have been properly stored as spare units in the warehouse. Hjdpfx Aajwpp Dqj Uol Price: per unit. Out of the original 7 units, 3 are currently still in our stock. The other 4 devices are now back in operation in Greece and Bulgaria. I purchase all machines and peripheral equipment directly from the customer at a fair price. The later sales price is calculated reasonably, ensuring that all three parties – seller, buyer, and myself as an intermediary – conduct a small but fair transaction. Therefore, unserious purchase offers from various used machinery dealers are unwelcome.

Stav: dielensky repasované (použité), Modernized machine with new LTG control system StoreControl L External dimensions: Installation height: 10,000 mm Installation width: 1,600 mm Installation depth: 2,680 mm 45/90 load carriers, each with a payload capacity of 250 kg Usable internal dimensions per carrier: W = 1,250 mm D = 825 mm H from 0 to 750 mm Total maximum load capacity: up to 20,000 kg Access opening starts at 865 mm above finished floor level (FFL), then 850 mm high Color scheme: grey / blue, carriers sendzimir-galvanized Surfaces cleaned, signs of use and minor deformations possible Performance data: Vertical drive 1 x 2.2 kW / 400 Volt Horizontal drive 1 x 0.29 kW / 400 Volt Additional features: Manual lifting door Subject to errors, technical modifications, and deviations from the photos Photos are of a similar machine Delivery and installation currently mainly in Germany, Austria, and several neighboring countries Hjdpfxorvkrfo Aa Ujl

Stav: dielensky repasované (použité), Modernized machine with new LTG-StoreControl P control system 2 identical machines available External dimensions: Installation height: 4340 mm Installation width: 3270 mm Installation depth: 1680 mm 26 carrier trays, each with a 250 kg load capacity Usable dimensions per tray: Height: 215 mm Width: 2730 mm Hjdpfxednh R Hj Aa Ujl Depth: 620 mm Chain pitch: 254 mm For 0 shelf units, intermediate floors are available; then the load capacity per usable level is 120 kg Intermediate floors can be custom made upon request Deposit table at a height of 900 mm above finished floor level - worktop with V2A stainless steel cover Colour: grey / grey, Surface cleaned, signs of use and minor deformations possible Drive motor output: 2 x 1.5 kW / 400 Volt Subject to errors, technical changes or deviations from details shown in images. Photos show a similar machine. Installation currently mainly in Germany, Austria and some neighbouring countries.

Stav: ako nová (výstavný stroj), Rok výroby: 2026, Machine available at a special price Machine available immediately (ex works Neckartailfingen) Demonstration unit Your benefits: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-established, reliable machine Including control cabinet with timer operation: The press is started manually and operates until the pre-set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square), Briquette length: 5–35 mm *material-dependent Throughput rate up to max. 25 kg/h *material-dependent Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H), Machine weight: approx. 250 kg, Silo capacity: approx. 250 liters, Motor: 2.2 kW, 400 V – 50 Hz, Noise emission: 62 dB Raw material requirements: – Wood chips and dust less than 15 mm in length – Moisture content below 15% ATRO – Sand, stones, metals, and minerals increase wear --- Options at extra charge: – Timer function + €490 net Machine is manually started and switches off automatically after the set duration. – Fill level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Also available in 230 volt version, Motor then 3 kW instead of 2.2 kW, Surcharge + €690 net (delivery time approx. 8 weeks) --- Hodsfci D Aopfx Aa Ujl

Stav: nový, Rok výroby: 2025, Funkcionalita: plne funkčný, číslo stroja/vozidla: DSPL-2025-Q2-01, celková hmotnosť: 150 kg, vstupné napätie: 400 V, vstupný prúd: 10 A, typ vstupného prúdu: Klimatizácia, dĺžka záruky: 12 mesiace, celková dĺžka: 1 560 mm, celková šírka: 780 mm, celková výška: 950 mm, vstupná frekvencia: 50 Hz, typ ochrany (IP kód): IP20, rok poslednej generálnej opravy: 2025, Integrated Pick-and-Place System for Industrial Assembly Technology The DS Place was developed to reduce the high integration effort of conventional pick-and-place solutions. In many projects, robots, feeder systems, vision systems, and controls are purchased separately and integrated via interfaces. This results in increased coordination efforts and extended commissioning times. The DS Place is designed as a fully integrated turnkey solution. System components: - SCARA robot - Camera-based component recognition - Automatic feeding via material hopper and pick conveyor - Integrated PLC control Functionality: Components are automatically fed from the material hopper onto the pick conveyor, identified by a camera, and then precisely transferred to a delivery conveyor or downstream system. Technical features: - Throughput: up to approx. 1,200 parts/h Hodpfxew Rm Hwj Aa Ujl - Suitable for metal, rubber, wood, and plastic parts - Maximum component length: approx. 30–35 mm - Gentle handling - Interfaces: TCP/IP, optional PN/PN coupler, 24 V I/O - Commissioning: set up, teach delivery point, start Fields of application: - Automatic assembly - Sorting and transferring of small parts - Integration into existing production lines Manufacturer: DS auto-solutions Year of manufacture: 2025 Condition: New

Stav: nový, Staple length, mm Staple width (Rieker width), mm Impact energy, Nm Painting jig for simultaneous coating of sash and glazing bead frames RU-LH Painting Jig for Glazing Bead Frames For processing staples L=50 mm Length 700 mm, width 500 mm, working height adjustable from 700 - 1200 mm. At each of the four corners of the glazing bead frame, one staple is placed. Positioning is diagonal, so that the staples protrude approximately 35 mm from the wood. When being pressed into the sash frame, a clamp fit is created. For painting, the glazing bead frame is positioned about 20 mm in front of the sash. After drying or before mounting the sash, the glazing bead frame is pressed flush into the sash and only removed again prior to glazing. The staples can then be removed by hand. Stand frame with support table, vertical at 85°, angle adjustable. Two compensation frames for different glazing bead thicknesses, operation via foot pedal. Price on request plus packaging and shipping Option at extra charge: Box of staples 26 x 50 mm, 4,300 pcs each Hsdpfxsxpi Efe Aa Usl EUR 77.00 You can find images of the painting jig at the end of the adjacent video! (Technical specifications as per manufacturer - subject to change!)

Stav: použitý, Rok výroby: 2003, Funkcionalita: plne funkčný, pracovná šírka: 4 400 mm, used CNC joinery machine from HUNDEGGER, type PBA - year of manufacture 2003 Can process element sizes of 4.40 m width, 16.50 m length, and 240 mm thickness. Elements can be pre-cut with the 5-axis chainsaw and then planed with a roller cutter. All units, except for the 5-axis circular saw that was retrofitted at the end of 2010, can process up to 240 mm panel thickness. The 5-axis circular saw can cut in continuous operation up to approx. 240 mm panel thickness at normal feed rate. Features: - 5-axis chainsaw 15 kW - 5-axis circular saw 11 kW - Vertical milling unit 22 kW - Vertical milling unit 22 kW Hedjylxfuspfx Aa Uol - Vertical drilling unit 4 kW - Portal width 6960 mm - 18 m guide rail - Working table height 700 mm - Frequency converter for 35 kW - Without working table – can be custom-built from cross-laminated timber (CLT) Dismantling and collection are the responsibility of the buyer.

Stav: dobrý (použitý), Rok výroby: 2013, prevádzkové hodiny: 374 h, zdvíhacia výška: 8 000 mm, typ paliva: elektrický, Drivetrain Drive: Wheel Weights Unladen weight: 2,469 kg Functional Lifting capacity: 454 kg Working height: 10,000 mm CE marking: yes Condition Technical condition: good Hodoyg U Syspfx Aa Uel Visual condition: good Further information Transport dimensions (L x W x H): 2.44 m / 1.17 m / 2.39 m Platform type: Solid platform Further information For more information, please contact Tobias Mayr. Genie 10m Electric Scissor Lift with new traction batteries Manufacturer: Genie Model: GS2646 Year of manufacture: 2013 Batteries: NEW Recorded operating hours: 374 hours Net weight: approx. 2469 kg Working height: approx. 10 m Platform height: 8 m Load capacity: 454 kg Integrated battery charger Non-marking tyres Transport dimensions (L/W/H): 2.44 m / 1.17 m / 2.39 m – the guardrail is foldable, height then 1.80 m UVV safety inspection can be renewed on request. Miscellaneous: Affordable delivery within Europe possible. Inspections by appointment only. We are happy to accept your equipment / construction machinery in part-exchange. We are happy to provide you with a tailored financing or leasing offer (for business customers only). If you have any questions, please contact us. All prices ex location 86684 Holzheim. All information is subject to change. Errors in print and transmission as well as prior sale reserved. All details regarding colour, equipment, condition, features etc. of the vehicles offered are without guarantee. Typing errors / mistakes / prior sale reserved.

Stav: použitý, Rok výroby: 1982, Sheet width: 480 mm Sheet thickness: 3 mm Stations: 13 Machine weight: approx. 11 t Space requirement: approx. 15 x 2 m Number of stations: 13 Hsdpfoyqtx Hox Aa Usl Number of straightening stations: 1 Shaft diameter: 60 mm Axial spacing, horizontal: 310 mm Axial spacing, vertical: 110 – 250 mm Speed: approx. 11 m/min. Connected load: approx. 20 kW Uncoiler (without drive) - Coil, internal: 508/610 mm - Coil weight: 3 t Flying hydraulic shear Roll set for hat profile The technical data are manufacturer’s or operator’s information and are therefore non-binding for us. We reserve the right to prior sale; exclusively our terms and conditions of business and sale apply. About us: - More than 400 of our own machines in stock - Over 15,000 m² storage space, crane capacity 70 t - More than 10,000 accessory items for your workshop Do you want to sell machines, production lines, or your business? Then talk to us. Further offers can be found on our website. Inspections are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Stav: nový, Rok výroby: 2025, číslo stroja/vozidla: 2021, 3D AC SERVO SkyCNC WK Series CNC Milling Machine - 2050 mm x 3050 mm x 220 mm High-precision milling and drilling with extremely high speed and quality. As a manufacturer of CNC milling machines, Pfeifer Technology with its SkyCNC CNC milling and engraving machines is your partner. Our PFEIFER Technology SkyCNC WK series milling machines featuring high-precision ball screw drives on all axes offer you maximum precision, accuracy, and speed—at a very attractive price-performance ratio. Thanks to the robust steel base frame construction (approx. 4 tons), the machines offer high static rigidity, enabling trouble-free processing of solid timber and various metals. The sophisticated positioning and distribution of the 35mm linear rails and guides, combined with the massive gantry featuring vibration-damping properties, are distinctive qualities of our CNC milling machines. All machine components and the servo drive units used are the result of years of development and experience. The powerful servo motors are highly efficient and backlash-free, connected to the German-quality ball screw, providing non-reactive drive to meet even the most demanding requirements. The advanced, freely programmable CNC controller allows for flexible operation via touchscreen under all production conditions and comes standard with our PFEIFER Technology SkyCNC WK series milling machines. With this CNC controller, you can create your milling data or import CAD/CAM data and then process them independently from a computer. Hsdpfx Asbnpgxoa Uol The tool changer (up to 16 tools), the full-aluminium vacuum table, various tool/workpiece cooling solutions, automatic lubrication for all axes, and other sophisticated features complete this advanced milling system. With the PFEIFER Technology SkyCNC WK series, you receive a reliable and powerful large-format gantry milling system for your applications. On request, we supply corresponding CAD/CAM ARTCAM SKYCNC controller software: 2.5 / 3D PFEIFER SKYCNC milling & engraving software in German for Windows® operating systems, or ArtCAM Pro / ArtCAM Insignia Software in German / Russian and other languages upon request. - Drive system: High-precision ball screw drive on X, Y, and Z axes, manufactured in Germany - Working speed: 15 m/min - xyz working area/travel range: 2050 x 3050 x 220 mm - Table size (vacuum table with milled vacuum channels): 2000 x 3000 x 30 mm - xyz repeatability: 0.02 mm - xyz accuracy: 0.01 mm - Compatible with Type3, ARTCAM, MASTERCAM, FeatureCam, etc. - Formats: ISO standard G-code, FANUC compatible - Options: Spindle motor / tool changer / vacuum table as per customer requirements - Warranty: 1 year - Spindle power: from 5.5 kW (other spindle powers optional) - Spindle speed: 6,000 – 24,000 rpm (as per requirements) - Spindle holder: BT30 / ER20 (other holders optional) - Drive: AC SERVO motors on all axes - Tool changer: 4-8 magazine positions - PDSP control RTU / MTU (Remote Terminal Unit) - Power supply: AC400V±10% 50Hz - Power consumption: 10–15 kW (depending on configuration) - Dimensions: 4500 (L) x 3100 (W) x 2500 (H) mm - Weight: 4,000 kg

Stav: nový, Rok výroby: 2025, Are you looking for a genuine nameplate laser machine and not a toy? Then you are exactly right here: (* Price depends on configuration and laser power; this is a brand-new laser machine manufactured by us) Laser Marker skyLaser Mark - 20W 2D software, 3D fiber laser engraving/marking laser optional - the complete solution for your complex laser processing needs. Nameplate Laser Machine Attention: Compare the installed components used in the offered laser systems: Scanlab (R) scanner, IPG Photonics (R) laser, Parker (R) axes, Schneider Electric (R) motors, Scanlab (R) controller, German software, cables – all components made exclusively in Germany! The laser systems are manufactured 100% at our plant in Plauen according to customer requirements! Competition often uses Chinese components here (it starts with the controller: EZCAD = Chinese origin!) (* The stated price may vary depending on configuration; images show various equipment options; you receive a brand-new laser machine manufactured by us) Ideal solution for: - Product identification - Laser marking - Laser engraving - Laser cleaning - Laser ablation Our skyLaser Mark nameplate laser systems are used precisely where conventional CO2 laser technology reaches its limits. Using a fiber laser with a wavelength of 1064nm, even the most intricate structures can be produced on almost any material. Advantages for your application include geometric flexibility and high processing accuracy. Regardless of the hardness of the workpiece, this type of processing can be applied. With a mobile and customizable work table to suit your needs, system flexibility is further increased. The system can be easily integrated into your production line or operated as a stand-alone solution. Our skyLaser Mark delivers highly precise and permanent markings (laser engravings) and is specifically suitable for the nameplate laser machine’s areas of application in metal and selected organic materials. A wide variety of fonts, barcodes, serial numbers, logos, and images can be applied effortlessly. Thanks to the excellent resolution, virtually all marking requirements can be fulfilled, including manufacture of embossing stamps, engravings, inscriptions, and complex, fine structures. The software is extremely user-friendly. Even very complex and demanding marking tasks can be easily created on the included industrial PC. Accurate positioning is a breeze, thanks to the optional observation camera for process monitoring and software-assisted workpiece alignment. Because the system has hardly any wear parts and is almost maintenance-free thanks to the IPG laser technology, it is particularly suitable for industrial applications and continuous operation. The skylaser marking/engraving laser at a glance: Processing area: from 110 x 110 mm, 120 x 120 mm, or 300 x 300 mm (depending on F-Theta lenses / 3D option) Laser source: IPG (pulsed fiber laser, ytterbium pulsed fiber laser) Hedpfx Aaodgfgco Ujl SCANLAB galvanometer scanner Nominal laser power: 20W

Rok výroby: 2001, stav: pripravené na použitie (použité), Throughput capacity: 600 l/h. In operation, the product (milk, cream, liquid egg, ice cream mix, etc.), which has been preheated in counterflow to 65°C, is heated to 130°C in less than one second by means of steam injection. It is then cooled down again in the shortest possible time by vacuum, with further cooling provided by the incoming product in counterflow and by ice water. The system includes a feed tank, speed-controlled pumps, homogenizer, preheater, infusion vessel, flash vessel, steam condenser, CIP chemical tank, and additional components. Inspection on site is possible. Hsdpforp E Nksx Aa Uol

Stav: dobrý (použitý), Rok výroby: 2008, prevádzkové hodiny: 24 629 h, Funkcionalita: plne funkčný, lisovacia sila: 100 t, šírka plniaceho otvoru: 1 100 mm, dĺžka plniaceho otvoru: 1 650 mm, dĺžka balíka: 1 200 mm, šírka balíka: 1 100 mm, výška balíka: 1 100 mm, hmotnosť balíka: 900 kg, celková hmotnosť: 24 000 kg, prepravná výška: 3 000 mm, kapacita olejovej nádrže: 2 000 l, výkon: 90 kW (122,37 k), objemový prietok: 1 350 m³/h, prepravná šírka: 2 400 mm, transportná dĺžka: 10 000 mm, Good day, We hereby offer you, without obligation, a used baling press manufactured by Presona AB, model LP 100 CH2 S. The following technical data has been taken from the manufacturer's manual and brochures, for which we cannot assume any liability for the accuracy or completeness. Manufacturer: Presona AB, Sweden Model: LP 100 CH2 S Year of manufacture: 2008 Total operating hours: 24,629 hours (status as of February 2026) Effective pump operating hours: 10,090 hours Main ram pressing force: 100 t Specific pressing force: 81 N/cm² Prepress flap pressing force: 50 t Feed chute dimensions: 1,650 x 1,100 mm Filling volume / press cycle: 3 m³ Bale dimensions: 1,100 x 1,100 mm Drive power: 2 x 45 kW Tying: 5-fold vertical Hydraulic oil tank volume: 2,000 L Transport weight, press only (after disassembly): approx. 25 t Note: The machine was used in a recycling facility for compacting paper, cardboard, and foil. The press is in good condition and will be replaced by a new, larger press in July 2026. Until then, the machine can be inspected in operation with material processing. We would be pleased if this press is of interest to you. Hedpfeymmmpjx Aa Ujl Your service team, Mertens & Frowein GmbH

Stav: nový, Rok výroby: 2024, rezacia výška (max.): 150 mm, Rozsah rezania okrúhlej ocele pri 45°: 108 mm, Rozsah rezania okrúhlej ocele pri 90°: 108 mm, BERG+SCHMID Double Mitre Band Saw GBS 218 Eco AutoCut Cutting speed: 25–80 m/min • Mitre cutting left 60° • For cutting steel, stainless steel, and aluminium profiles • Quick-release vice with fast clamping device a. Built-in band tension control b. Carbide blade guides c. Electric coolant system • Machine base (supplied disassembled) The AutoCut system consists of: • Hydraulic cylinder, feed control, spring assembly, end switch and allows for three modes of operation: 1. Automatic saw frame lowering via hydraulic cylinder with stepless adjustable feed control valve and end switch at the end of the cut 2. Rapid lowering of the saw frame from rest position to the workpiece, then switch to normal cutting feed 3. Manual mode – hydraulic cylinder acts as a brake cylinder Saw blade dimensions: 2455x27x0.9 mm Hsdpfx Aast I R Ede Usl Additional accessories such as saw blades, roller conveyors, length stops, minimum quantity lubrication systems etc. available on request! Delivery time: ex stock Waiblingen Beinstein