Emmegi Phantomatic T3A kúpiť použité (140)

Stav: nový, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 000 mm, šírka ložného priestoru: 2 330 mm, výška ložného priestoru: 2 400 mm, objem nakladacieho priestoru: 51 m³, celková šírka: 2 550 mm, Rok výroby: 2025, Výbava: ABS, KEMPF SKM 36/3 SHL-Light | 3-axle steel tipper, new vehicle Expected delivery: February 2026 --- General information --- Type: SKM 36/3 SHL-Light • Design: 3-axle semi-trailer tipper with conical steel trough • Permissible total weight: 36,000 kg • Axle load: 3 x 8,000 kg • Fifth wheel load: approx. 12,000 kg • Nominal fifth wheel height: 1,200 mm (technical 1,200–1,260 mm) • Loading length: approx. 9,000 mm • Loading width: front 2,280 mm / rear 2,330 mm • Body height: approx. 2,400 mm • Body capacity: approx. 51.1 m³ • Total height: approx. 3,805 mm to loading edge (loaded) --- Chassis --- KEMPF welded construction made of fine-grain steel, shot-blasted • Tapered/conically offset design (approx. 80 mm offset) • All add-on parts hot-dip galvanized • Chassis colour: Deep black (RAL 9005) Cedsxn Eckjpfx Alysrb • Body colour: White aluminium (RAL 9006) • Tarp colour: Silver (Mehler 911) • Contour marking on sides (white) and rear (red) according to EC Directive --- Axles, Tyres & Suspension --- SAF INTRADISC plus Integral (off-road version) • Disc brakes Ø 430 mm • Undercarriage laser-aligned (optimised tyre wear & consumption) • Lift axle (fully automatic, with forced lowering when unladen) • Air suspension with small 300 mm bellows and lifting/lowering device • Quick deflation available • Load gauge with tonne increments, front left • Tyres: 385/65 R 22.5 • Rims: Alcoa Ultra ONE aluminium rims, Dura-Bright EVO, 11.75 x 22.5, ET 120 --- Brake System & Safety --- Electronic brake system (Knorr EBS) with RSP (Roll Stability Program) • ABS 4S/2M with stop light supply • Tyre pressure monitoring system as per ECE R141 (TPMS) • Trailer Info Module TIM G2 with brake wear indicator • Acoustic reverse warning system • Foldable underride guard (ECE R58.03) with spring-assisted lifting • Removable towing eye (right side) • Reflective plate (200 x 1,130 mm) --- Hydraulics --- Front tipping cylinder Hyva (single-circuit hydraulic system, 190 bar) • Hard-chrome-plated piston • Hydraulic connection: Edbro 1" screw coupling • Tractor unit pressure adjustable if required --- Body / Superstructure --- Conical steel trough (wider at rear) • Material: HARDOX steel (HB 450 / HB 500) • Floor: 5 mm HARDOX steel, continuous • Side walls: lower 4 mm / upper 3 mm HARDOX with reinforcement edges • Front wall: 20° inclined, 3.2 mm HARDOX steel • Rear wall: • Double-winged (1/3 left, 2/3 right) • Non-pendulum, manual hook locking • Grain-tight with rubber gasket • Shutter 400 x 400 mm, manual lever operation • Rear wall approx. 40 mm lower (tarp can remain open) • Air vibrator, switch control rear left • Catwalk with guard rail per accident prevention regulations, ladder left, two-step access • Interior access via steps on front wall • Shovel and broom holder on front wall --- Tarp & Bows --- Roll tarp made of high-quality PVC (680 g/m²), colour silver • 3 arched tarp bows (1x fixed steel, 2x telescopic aluminium) • Crank handle operation right, central locking left • Tarp protection made of aluminium, pivotable and lockable • Accessories: stainless steel hooks/pull rod --- Lighting & Electrics --- Complete LED equipment per EC/ADR regulations • LED three-chamber lights with chrome rings • LED rear fog lamp, LED licence plate lighting • LED side marker lights with indicator function • Brake light (LED) • 2 additional LED reversing lights (side mounted) • Interior body lighting (LED, switch left on frame with control light) • Socket: 15-pin --- Accessories --- Two too

Stav: veľmi dobrý (použitý), číslo stroja/vozidla: 268896, Funkcionalita: plne funkčný, výkon: 5,5 kW (7,48 k), EMMEGI PERTICI Phantomatic 3400 Vertikálna frézovačka s 3 numericky riadenými osami a manuálnym posuvom osi Z. Credpfxey Ntvqe Alyob Spracovanie materiálov z PVC, hliníka a ocele (hrúbka steny do 3mm). Technické údaje: Posuv v osi X: 2400/3400 mm Posuv v osi Y: 240 mm Posuv v osi Z: 230 mm Motorové vreteno: 5,5 kW Otáčky: 18 700 ot/min Výmena nástrojov: manuálna Upínanie nástrojov: ISO 30 Elektrina: 380 V / 16A Hmotnosť: 700 kg Ďalšie informácie v obrázkovom dátovom liste Stroj je stále pripojený a je možné ho prezrieť po dohode vopred. Demontáž a nakládka, účtovanie podľa časovej náročnosti

Stav: pripravené na použitie (použité), Rok výroby: 2009, celková hmotnosť: 2 600 kg, Tento 3-osý SCHÜCO PDG E CUT bol vyrobený v roku 2009. Maximálny priemer pílového kotúča je 600 mm, pričom motor dosahuje otáčky 2410 min⁻¹. Stroj je vybavený odvodovým pásom a odsávacím systémom pre efektívnu prevádzku. Pokiaľ hľadáte vysokokvalitné rezacie možnosti, odporúčame zvážiť SCHÜCO PDG E CUT dvojhlavovú pokosovú pílu, ktorú ponúkame na predaj. Pre viac informácií nás kontaktujte. • Otáčky motora: 2410 min⁻¹ • Max. priemer pílového kotúča: 600 mm • Typ motora: M 100, 4 kW • Elektrické pripojenie: 3~ 400 V / 50 Hz / 7,7 A • Obrábaný materiál: hliník • Výška [mm]: 1870 Cjdpfx Asyv E Edslyjrb • Hĺbka [mm]: 2100 • Tlak vzduchu: 7 bar • Účinnosť: 53 • Spotreba: NL/cyklus • Uchytenie: 32 mm • Typ riadiaceho napätia: DC • Šírka [mm]: 7125 • Napájacie napätie (stroj): 400 V • Typ napätia (stroj): AC • Frekvencia (stroj): 50 Hz • Výkon motora: 2 x 2,2 kW • Riadiace napätie: 24 V • Max. dĺžka rezu: 5000 mm • Min. dĺžka rezu: 350 mm • Min. dĺžka rezu so softvérom: 270 mm • Vyhotovenie: 5 m • Nastavenie uhla: servomotory • Vonkajší sklopný uhol: do 20° • Vnútorný náklon: do 45° Doplnková výbava • Výstupný dopravníkový pás • Odsávacie zariadenie, značka: Emmegi

Stav: nový, Rok výroby: 2026, Porovnateľné so strojmi napr. Emmegi Dvojitá pokosová píla na oceľ Dĺžka rezu: 5000 mm S 7 NC-osami na pozicionovanie dĺžky, náklon pílových kotúčov smerom von aj dovnútra, posuv pílových kotúčov a reguláciu otáčok pílových motorov Torziálne pevná zváraná konštrukcia s lineárnym vedením v pozdĺžnom smere 2x pílový motor s výkonom 4,5 kW každý Otáčky pílového kotúča: 0 – 250 ot./min Motorický posuv pílového kotúča zozadu dopredu Rýchlosť posuvu plynule nastaviteľná Nastavenie uhla motoricky, v rozsahu 135° až 45° Na použitie HSS kotúčových píl s priemerom 400 mm Pneumatické ochranné kryty Crjdpsyinu Hofx Alyeb Chladenie vodou s čerpadlom a chladiacou vaňou Ľavé pílové agregát pevne upevnené na ráme, pravé motoricky posuvné Presnosť pozicovania: ± 0,15 mm Maximálna rýchlosť posuvu: 25 m/min Pozicionovanie dĺžky s ohľadom na uhol rezu a výšku profilu Na každej pílovom hlave tri horizontálne a vertikálne upínače profilu; pri poklese tlaku zostávajú horizontálne valce upnuté Materiálová podpera medzi pílovými hlavami, pneumaticky otočná 15" dotyková obrazovka Spracovanie individuálnych rezov Spracovanie zoznamov rezov Vytváranie zoznamov rezov cez klávesnicu Import zoznamov rezov cez USB alebo sieť Rezanie rohových uhlov Nadmerná dĺžka rezov Krátke rezy od dĺžky 5 mm Prerezávanie Možné voliteľné vybavenie: Mikro-postrekovacie zariadenie Zväčšený náklon pílového agregátu dovnútra do 150° Tlačiareň etikiet Čítačka čiarových kódov Ďalší sieťový port a zmluva o diaľkovom servise

Stav: použitý, najazdené kilometre: 116 104 km, výkon: 150 kW (203,94 k), prvá registrácia: 09/2021, typ paliva: nafta, pohotovostná hmotnosť: 2 119 kg, celková hmotnosť: 2 800 kg, ďalšia kontrola (TÜV): 03/2028, palivo: nafta, farba: sivý, kabína vodiča: iný, typ prevodu: automatický, emisná trieda: žiadny, zavesenie: iný, počet sedadiel: 6, celková dĺžka: 4 904 mm, stavebná výška: 1 990 mm, Výbava: ABS, airbag, centrálne zamykanie, elektronický stabilizačný program (ESP), imobilizačný systém, klimatizácia, navigačný systém, nezávislé kúrenie, palubný počítač, pohon všetkých kolies, posuvné dvere, prípojné zariadenie, sadzový filter, systém kontroly trakcie, * Dohodnutie termínu pre poradenstvo a skúšobnú jazdu = kratšie čakacie doby: * Čas je vzácny a nemali by ste ho strácať čakaním. Preto Vás prosíme o telefonické dohodnutie termínu na poradenstvo alebo skúšobnú jazdu. * Nefajčiar * Servisná knižka * Toto vozidlo má riadne vedenú digitálnu servisnú knihu vo VW. * Posledný servis bol vykonaný pri 116 102 km. PREVODOVKA / PODVOZOK * Motor 2,0 l – 150 kW TDI * Karosárska verzia: štandardná strecha * Podvozok: zosilnené pruženie a tlmenie (vhodné pre zlé cesty) * Podvozok 17 * Transportér VZHĽAD * Tónované sklá z výroby * Nárazníky v sivej farbe * Sada sedadiel: 5-miestne, 2-3-0 (2 samostatné sedadlá vpredu, 3 samostatné sedadlá vzadu) OSVETLENIE & VÝHĽAD * LED hlavné svetlomety s LED denným svietením * Balík výbavy Svetlo + Výhľad * Vnútorné osvetlenie v nákladnom/obslužnom priestore: LED * Vyhrievané trysky ostrekovačov a ukazovateľ hladiny ostrekovača * Vyhrievané zadné okno so stieračom * Denné svetlo s automatickým prepínaním jazdných svetiel, funkcia Leaving home a manuálna Coming home funkcia * LED svetlomety a zadné svetlá * Zadné svetlá LED, červené ZÁBAVA * Cúvacia kamera * Digitálny kokpit (digitálny displej prístrojovej dosky) * Mobilné online služby App-Connect (káblové aj bezdrôtové) * Audio-navigačný systém Discover Pro s prenosom a internetom (dotyková obrazovka, USB) * Bluetooth rozhranie pre mobilný telefón * Digitálny rádioprijímač (DAB+) * 2x USB multimediálne rozhranie (typ C) vpredu Crodsyvcu Uepfx Alyjb * 4 reproduktory: 2 výškové, 2 basové * Regiónový kód ECE pre rádio * Pripravené pre We Connect a We Connect Plus ASISTENČNÉ SYSTÉMY A BEZPEČNOSŤ * Asistenčný systém: brzdový asistent HBA * Asistenčný systém: multikolizná brzda (Multi Collision Brake) * Vypínač protišmykovej regulácie (ASR) * Elektrická detská poistka * Núdzový systém * Dažďový senzor KOMFORT * Prídavné kúrenie (teplovodné) s funkciou nezávislého kúrenia * Výbavový balík Komfort Plus * Klimatizácia Climatic (vodič) + prídavné kúrenie (v nákladnom/obslužnom priestore) * Sedadlá vodiča: vyhrievané sedadlo vodiča * Sedadlá vodiča: otočné sedadlo spolujazdca * Sedadlá vodiča: vodič a spolujazdec s lakťovými opierkami vpredu * Dodatočné protihlukové opatrenia v kabíne vodiča a priestore pre cestujúcich * 2x 12V zásuvka v kabíne vodiča * Špeciálne tlmenie hluku v interiéri OSTATNÉ * Ťažné zariadenie (odnímateľná guľa) * Opláštenie nákladného/obslužného priestoru: polovýška tvrdá vláknitá doska * Palivová nádrž: 70 litrov * Gumená podlaha v nákladnom/prepravnom priestore * Čelné sklo z lepeného skla * Gumená podlaha v kabíne vodiča * Panty zadných dverí/vrát v štandardnom prevedení * Osvetlenie nástupného stupňa v priestore pre cestujúcich/náklade * Povolená celková hmotnosť 3,08 t * Plastový ochranný kryt nakladacej hrany vo vnútri * Jednotónový klaksón * Pracovné napätie 12 V * dieselový motor 2,0 l/150 kW (4V) TDI, BIT Common-Rail základný motor: T12/T47/T6F/T98/T3A * Prístrojový panel (km/h), ukazovatele rýchlosti, celkovej/dennej vzdialenosti, otáčok, zásoby paliva a času * Držiak na nastupovanie na A-stĺpiku na strane vodiča a spolujazdca * 2. batéria * Rázvor 3000 mm * Palubná dokumentácia v nemčine * Filter pevných častíc * Isofix uchytenie pre detskú sedačku na zadnom sedadle * Posuvné dvere nákladného/prepravného priestoru naľavo * Multifunkčný kožený volant * Asistent rozpoznania únavy * a oveľa viac * Vyššie uvedené informácie sú bez záruky.

Stav: nový, Machining center with 4 CNC-controlled axes for processing profiles made of aluminum, PVC, and steel Comparable to Emmegi, Elumatec, Fom, Pertici, etc. Machine Frame: Robust welded construction, stress-relieved annealed, with hardened linear guide rails Protective enclosure along the entire machining length Pneumatically operated protective door Milling Spindle: 3.8/4.6 kW S1/S6 3.0/3.7 Nm S1/S6 Max. 18,000 rpm, air-cooled With ISO 30 tool holder Minimal quantity lubrication system for tools with fill level monitoring Tool Magazine: 5 slots, located on the left side of the machine bed, accommodating drilling, milling, tapping tools, angle head, and saw blades up to Ø 150 mm Workpiece Clamping: 4 pneumatic profile clamps, clamping range up to 250 mm Automatic positioning via a device on the Z-axis Workpiece Positioning: One pneumatic reference stop each on the left and right of the A-axis Travel Paths: X-axis 3500 mm Y-axis 370 mm Z-axis 348 mm A-axis ±90° Travel Speeds: X-axis 70 m/min Y-axis 30 m/min Z-axis 30 m/min A-axis 60°/sec Maximum Working Areas: X-axis 3270 mm Y-axis 250 mm at 0°, 116 mm at ±90° of the A-axis Z-axis 170 mm at 0°, 200 mm at ±90° of the A-axis Operating Software: CAD/CAM in 3D technology (option, included) Programming system according to ISO standard Functionality: Linear and circular interpolation on two axes (X-Y) Codpfx Aswrcwpslyjrb Three-sided machining via tilting the A-axis 90°-0°-90° End-face machining with a disc cutter Operating Modes: One profile bar across the entire machining length Two profile bars with split machining length Lubrication System: Automatically controlled centralized lubrication for all axes—ball screw drives and guides, with fill level monitoring Operation: 18.5" touchscreen Mouse & keyboard Connection Data: Electrical: 400V/50Hz (3-phase + N + PE), 16 A, Supplied without power cable Pneumatics: pressure 6 - 8 bar Dimensions and Weight: Length: 5800 mm Width: 1640 mm Height: 2000 mm Weight: 2000 kg Includes: Graphical programming software CM3D/CAD3D Barcode scanner Additional network connection including remote maintenance/diagnostics for 1 year

Stav: nový, Comparable with Emmegi, Elumatec, Pressta-Eisele, Pertici, Fom, etc. 3 CNC axes for length positioning and electronic tilting of saw blades outwards to 22.5° and inwards to 135° Cutting length: 5000 mm Single cut processing Processing of cutting lists Creation of cutting lists via keyboard Import of cutting lists via USB flash drive or network Automatic mitre angle/incremental cutting Processing of overlength cuts Short cuts from 5 mm cutting length Cross cuts Manages label printing with data or barcodes Hydropneumatic saw blade feed, infinitely adjustable Pneumatic safety covers Travelling roller conveyor on the right saw unit with additional clamping cylinder Length positioning considering saw angles and profile height Profile height measurement with length compensation including horizontal clamping cylinder Each saw unit equipped with one horizontal and one vertical clamping cylinder Additional horizontal clamping cylinder on the stationary left saw unit (left of the saw blade) 1 piece profile support between the saw units, pneumatically swiveling With two-hand operation Industrial PC with Windows Embedded and 15.0'' HMI touchscreen Includes the following options: Minimal quantity lubrication units Label printer Network connection for teleservice, 1 year subscription We always have suitable extraction systems in stock, also for existing aluminium saws! Credpfx Ajwnfvtslyob

Stav: nový, 40 MP je jednokotúčová píla zhora so 400 mm pilovým kotúčom. Crsdpfx Aerfapaelyeb Porovnateľná so značkami Emmegi, Elumatec, Pressta-Eisele, Mecal, Fom atď. Rezací stôl možno manuálne nastaviť pod uhlom +/- 45°. Naklon pílového kotúča je možné manuálne nastaviť od 0° do 45° smerom von. Jednokotúčová píla 40MP je vybavená horizontálnymi upínacími valcami na správne upnutie profilu, minimálnym mazacím systémom a mechanickou ochranou reznej zóny. Pozrite si aj naše použité skladové stroje značiek Emmegi, Elumatec, Pressta Eisele a ďalších.

Stav: dobrý (použitý), Vhodné napríklad pre stroje od Emmegi, Elumatec, Pressta-Eisele, Mecal, Fom atď. Merací systém s digitálnym displejom a pohodlným nastavením pomocou ručného kolieska Codpsxy Hb Sofx Alyerb meracia dĺžka 3600 mm namontované na valčekovú dráhu s plastovými valčekmi šírka podložky cca 290 mm ideálne na montáž k existujúcej píle použité, v dobrom stave

Stav: nový, Skladom k dispozícii v rôznych variantoch! Vhodné napríklad pre stroje Emmegi, Elumatec, Pressta-Eisele, Mecal, Fom atď. Na montáž na hliníkové kotúčové píly, ideálne pre dvojgeometrické píly a automatické píliace zariadenia Výkon 2,2 alebo 3,0 kW, s diaľkovým spúšťaním alebo bez neho Zásobník 160 litrov, vyberateľný 2 odsávacie hrdlá Cedpfx Aswczfaolyerb Presúvateľný, s 2 uzamykateľnými kolieskami Hadica, prípojky a redukcie dostupné podľa Vašich požiadaviek

Stav: dobrý (použitý), Rok výroby: 1993, Pokosová píla, pílová jednotka pravá/ľavá, dvojitá pokosová píla, píla na rezanie na dĺžku a pokos, dvojstranný profilovací stroj -Výrobca: Emmegi, Pressta Eisele, dvojitá pokosová píla typ SINGLE 2 HM500 -Rezná dĺžka: 250 až 5000 mm -Pílové jednotky: natáčateľné o 45° -Pílový kotúč: Ø 500 mm -Rezné parametre pri 90°: výška rezu 350 mm, šírka rezu 160 mm -Rezné parametre pri 45°: výška rezu 260 mm, šírka rezu 125 mm -Rozmery: 5750/1220/V1700 mm -Hmotnosť: 1200 kg Cjdpstxkprofx Alyorb

Stav: nový, Rok výroby: 2025, lisovacia sila: 300 t, zdvih: 800 mm, šírka stola: 1 000 mm, dĺžka stola: 1 000 mm, vzdialenosť medzi stĺpmi: 1 000 mm, sila zasunutia: 100 t, prevádzkový tlak: 250 lišta, Výbava: bezpečnostná svetelná závora, dokumentácia / manuál, CRONOSSTECH 300 / 100 TON COLUMN-TYPE HYDRAULIC DRAWING PRESS General Description The CRONOSSTECH 300 / 100 ton column-type hydraulic drawing press is a high-rigidity, four-column hydraulic press solution designed for metal forming, deep drawing, and precision pressing applications. The body is constructed from St52 grade steel, subjected to stress relief via vibration. This ensures parallelism and perpendicularity tolerances remain stable along the full stroke during pressing operations. Ram and die cushion systems operate independently; stroke length and tonnage can be precisely controlled via the touch panel. Utilizing REXROTH or PARKER hydraulic components, an IE3 class motor, and PLC-controlled structure, the machine delivers high efficiency and reliable operation. An automatic lubrication system and electronic filter contamination alerts minimize maintenance requirements. With its 300 / 100 ton capacity, this model is an ideal industrial press solution for medium and high-tonnage metal forming, deep drawing, and tooling applications. Key Advantages - High-rigidity, four-column press frame - Independent stroke and tonnage adjustment for ram and die cushion - Full control via touch panel - High accuracy and repeatability - Long service life, low maintenance design Fields of Application - Metal forming - Deep drawing operations - Tool trial and production lines - Auxiliary pressing processes ⚙️ STANDARD AND TECHNICAL FEATURES Cedpox N Unzefx Alysrb TYPE: 4-Column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 units, induction hardened & chrome plated SLIDE GUIDING: Bronze Zr14 CAPACITY (RAM): 300 Ton CAPACITY (DIE CUSHION): 100 Ton DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m RAM STROKE: 800 mm DIE CUSHION STROKE: 200 mm MIN. DAYLIGHT: 100 mm MAX. DAYLIGHT: 900 mm WELDING STRESS RELIEF: Vibration stress relief WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 30 kW – IE3 MAIN PUMP: 45 cm³ – REXROTH or PARKER MOVING TABLE FAST DESCENT: 150 mm/s FORMING SPEED: 12 mm/s RETURN SPEED: 170 mm/s DIE CUSHION FORWARD SPEED: 30 mm/s MAIN CYLINDER BORE: Ø 390 mm – Ck45 DIE CUSHION CYLINDER BORE: Ø 230 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROXIMATE PRESS DIMENSIONS: 4000 × 1450 × 1450 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1300 mm FRONT CHARGING VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER PLC: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 18 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stav: nový, Rok výroby: 2025, lisovacia sila: 250 t, zdvih: 800 mm, šírka stola: 1 000 mm, dĺžka stola: 1 000 mm, vzdialenosť medzi stĺpmi: 1 000 mm, sila zasunutia: 80 t, prevádzkový tlak: 250 lišta, Výbava: bezpečnostná svetelná závora, dokumentácia / manuál, CRONOSSTECH 250 / 80 TON COLUMN-TYPE HYDRAULIC SPINNING PRESS General Description The CRONOSSTECH 250 / 80 ton column-type hydraulic spinning press is a highly rigid four-column hydraulic press solution, designed for metal spinning, deep drawing, and precision pressing applications. The ST52 grade steel frame undergoes a stress-relief process using vibration techniques, thereby maintaining high parallelism and perpendicularity tolerances during long-term operations. The ram and cushion systems operate independently; stroke and pressure settings can be finely adjusted via a touch panel. Utilizing hydraulic equipment from REXROTH or PARKER, an IE3 motor class, and PLC-controlled structure, it offers high efficiency and reliable operation. The automatic lubrication system and electronic filter contamination alerts minimize maintenance requirements. With its 250 / 80 ton capacity, this model is the ideal industrial press solution for medium and high tonnage metal spinning, deep drawing, and die applications. Key Advantages - High rigidity four-column press frame - Independent stroke and tonnage adjustment for ram and cushion - Full control via touch panel - High precision and repeatability - Long-lasting, low-maintenance design Fields of Application - Metal spinning operations - Deep drawing operations - Die testing and production lines - Auxiliary pressing processes ⚙️ STANDARD & TECHNICAL SPECIFICATIONS TYPE: 4 Column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs, induction hardened, chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 250 tons CAPACITY (CUSHION): 80 tons DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm PARALLELISM TOLERANCE: 120 microns/m PERPENDICULARITY TOLERANCE: 60 microns/m STROKE (RAM): 800 mm STROKE (CUSHION): 200 mm MIN. DAYLIGHT: 100 mm MAX. DAYLIGHT: 900 mm WELDING STRESS RELIEF: Vibration stress relief WELDING PROCEDURE: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 22 kW – IE3 MAIN PUMP: 36 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DESCENT: 150 mm/s SPINNING SPEED: 12 mm/s RETURN SPEED: 170 mm/s CUSHION TABLE FORWARD SPEED: 30 mm/s MAIN CYLINDER BORE: Ø 360 mm – Ck45 CUSHION CYLINDER BORE: Ø 200 mm – Ck45 AUXILIARY SPEEDING CYLINDERS: 2 units APPROX. PRESS DIMENSIONS: 4000 × 1450 × 1450 mm BOTTOM TABLE HEIGHT FROM GROUND: 1300 mm FRONT FILLING VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER PLC: DELTA TOUCH PANEL: DELTA 7” CONTROL COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 16 tons Production Note Codpfjx N Um Rox Alyjrb This machine is manufactured by CRONOSSTECH in Turkey.

Stav: nový, Rok výroby: 2025, lisovacia sila: 200 t, zdvih: 800 mm, šírka stola: 1 000 mm, dĺžka stola: 1 000 mm, vzdialenosť medzi stĺpmi: 1 000 mm, sila zasunutia: 70 t, prevádzkový tlak: 250 lišta, Výbava: bezpečnostná svetelná závora, dokumentácia / manuál, CRONOSSTECH 200 / 70 TON FOUR-COLUMN HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 200 / 70 ton four-column hydraulic deep drawing press is a high-rigidity four-column hydraulic press solution designed for metal spinning, deep drawing, and precision pressing applications. The St52 grade steel construction frame undergoes stress-relieving via vibration method, ensuring high parallelism and perpendicularity tolerances are maintained during prolonged operations. The ram and cushion systems operate independently; stroke and pressure settings can be precisely adjusted via the touch panel. Equipped with REXROTH or PARKER hydraulic components, IE3 motor class, and PLC-controlled architecture, the press provides high efficiency and reliable performance. The automatic lubrication system and electronic filter contamination warnings ensure minimum maintenance requirements. With its 200 / 70 ton capacity, this model is an ideal industrial press solution for medium and high tonnage metal forming, deep drawing, and die applications. Key Advantages - Four-column rigid press frame - Independent stroke and tonnage adjustment for ram and cushion - Full control via touch panel - High precision and repeatability - Durable construction with low maintenance cost Areas of Use - Metal spinning operations - Deep drawing applications - Die trial and production lines - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL FEATURES TYPE: Four-column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs induction hardened, chrome-plated shaft SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 200 Ton CAPACITY (CUSHION): 70 Ton DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm PARALLELISM TOLERANCE: 120 micron/meter PERPENDICULARITY TOLERANCE: 60 micron/meter STROKE (RAM): 800 mm STROKE (CUSHION): 200 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 900 mm WELD STRESS RELIEVING: By vibration method WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 22 kW – IE3 MAIN PUMP: 36 cm³ – REXROTH or PARKER Credsx N Umqepfx Alysb MOVABLE TABLE FAST DESCENT: 150 mm/sec FORMING SPEED: 12 mm/sec RETURN SPEED: 170 mm/sec CUSHION TABLE FORWARD SPEED: 30 mm/sec MAIN CYLINDER BORE DIAMETER: Ø 320 mm – Ck45 CUSHION CYLINDER BORE DIAMETER: Ø 190 mm – Ck45 AUXILIARY FAST CYLINDERS: 2 Units APPROXIMATE PRESS DIMENSIONS: 4000 × 1450 × 1450 mm LOWER TABLE HEIGHT FROM FLOOR: 1300 mm FRONT CHARGE VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER PLC: DELTA TOUCH PANEL: DELTA 7” CONTROL COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 14.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stav: nový, Rok výroby: 2025, lisovacia sila: 150 t, zdvih: 600 mm, šírka stola: 800 mm, dĺžka stola: 800 mm, vzdialenosť medzi stĺpmi: 800 mm, prevádzkový tlak: 250 lišta, Výbava: bezpečnostná svetelná závora, dokumentácia / manuál, CRONOSSTECH 150/50 TON COLUMN-TYPE HYDRAULIC DRAWING PRESS General Description The CRONOSSTECH 150/50 ton column-type hydraulic drawing press is an industrial press solution developed for metal forming, deep drawing, and precision pressing applications, featuring a four-column rigid frame structure. The St52 grade steel construction body undergoes a stress relief process using the vibration method. This ensures high parallelism and perpendicularity tolerances are maintained during prolonged operations. The ram and cushion systems operate independently; stroke and pressure settings can be adjusted precisely via the touchscreen panel. Incorporating REXROTH or PARKER hydraulic components, IE3 motor class, and PLC-controlled structure, the press offers high efficiency, reliability, and an extended service life. Automatic lubrication system and electronic filter contamination alerts minimize maintenance requirements. With a capacity of 150/50 tons, this model is an ideal solution for serial production, die testing, and medium to high tonnage deep drawing applications. Key Advantages - 4-column rigid press frame - Independent stroke and tonnage adjustment for ram and cushion - Full control via touchscreen panel - High accuracy and repeatability - Low maintenance cost and long service life Fields of Application - Metal spinning operations - Deep drawing applications - Die testing and manufacturing processes - Auxiliary pressing operations ⚙️ STANDARD & TECHNICAL SPECIFICATIONS TYPE: 4 Column BODY MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs. Induction-hardened chrome plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 150 Ton CAPACITY (CUSHION): 50 Ton DISTANCE BETWEEN COLUMNS: 800 × 800 mm PARALLELISM TOLERANCE: 120 micron/m. PERPENDICULARITY TOLERANCE: 60 micron/m. STROKE (RAM): 600 mm STROKE (CUSHION): 200 mm MIN. DAYLIGHT: 100 mm MAX. DAYLIGHT: 700 mm STRESS RELIEF: Vibration stress relief WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 18.5 kW – IE3 MAIN PUMP: 36 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DESCENT SPEED: 150 mm/s MOVABLE TABLE DRAWING SPEED: 12 mm/s MOVABLE TABLE RETURN SPEED: 170 mm/s CUSHION TABLE FEED SPEED: 30 mm/s MAIN CYLINDER BORE: Ø 280 mm – Ck45 CUSHION CYLINDER BORE: Ø 160 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROX. HEIGHT OF PRESS: 3800 mm APPROX. WIDTH OF PRESS: 1150 mm APPROX. DEPTH OF PRESS: 1150 mm TABLE HEIGHT FROM FLOOR: 1200 mm MAIN FILL VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (adjustable via screen) RAM / CUSHION STROKE & TONNAGE ADJUSTMENT: Adjustable via screen SYSTEM & PRESS STATUS INFORMATION: Viewable on screen DIE MEMORY: Adjustable via screen LINEAR POSITION TRANSDUCER: NOVATECHNIK or TURCK PLC APPLICATION: DELTA TOUCH CONTROL PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 9 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey. Credpex N Ul Tefx Alysb

Stav: nový, Rok výroby: 2025, lisovacia sila: 100 t, zdvih: 600 mm, šírka stola: 800 mm, dĺžka stola: 800 mm, vzdialenosť medzi stĺpmi: 800 mm, sila zasunutia: 40 t, prevádzkový tlak: 250 lišta, Výbava: bezpečnostná svetelná závora, dokumentácia / manuál, CRONOSSTECH 100/40 TON COLUMN-TYPE HYDRAULIC DEEP DRAW PRESS General Description The CRONOSSTECH 100/40 ton column-type hydraulic deep draw press is an industrial press solution with a four-column rigid frame, specifically designed for metal forming, deep drawing, and precision pressing applications. The St52 grade welded steel frame undergoes a vibration stress relief treatment, ensuring the maintenance of high parallelism and perpendicularity tolerances over long operating periods. The ram and cushion systems operate independently; stroke and pressure settings can be precisely controlled via a touch-screen interface. REXROTH or PARKER hydraulic components, IE3 class motor, and PLC-controlled system architecture deliver high efficiency, reliability, and long service life. An automatic lubrication system and electronic filter contamination warnings minimize maintenance requirements. This model is the ideal solution for medium-scale serial production, die try-out, and precise forming applications. Key Advantages - Rigid four-column press frame - Independent stroke and tonnage adjustment for ram and cushion - Full control via touch-screen panel - High precision and repeatability - Low maintenance costs, long service life Application Areas - Metal deep drawing processes - Deep drawing applications - Die try-out and prototype manufacturing - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-Column FRAME MATERIAL: St52 – ERDEMIR steel COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs, induction-hardened, chrome-plated shafts SLIDE BEARING SYSTEM: Bronze Zr14 CAPACITY (RAM): 100 Tons CAPACITY (CUSHION): 40 Tons Codpfsx N Ulyex Alyerb DISTANCE BETWEEN COLUMNS: 800 × 800 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m STROKE (RAM): 600 mm STROKE (CUSHION): 200 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 700 mm WELDED STRUCTURE STRESS RELIEF: Vibration stress relief WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 15 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DOWN SPEED: 150 mm/sec MOVABLE TABLE PRESSING SPEED: 12 mm/sec MOVABLE TABLE RETURN SPEED: 170 mm/sec CUSHION FORWARD SPEED: 30 mm/sec MAIN CYLINDER BORE: Ø 230 mm – Ck45 CUSHION CYLINDER BORE: Ø 145 mm – Ck45 AUXILIARY FAST ADVANCE CYLINDERS: 2 units APPROXIMATE PRESS HEIGHT: 3500 mm APPROXIMATE PRESS WIDTH: 1150 mm APPROXIMATE PRESS DEPTH: 1150 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1200 mm MAIN CHARGING VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (adjustable via display) RAM / CUSHION STROKE AND TONNAGE ADJUSTMENT: Adjustable via display SYSTEM & PRESS STATUS MONITORING: Display interface DIE MEMORY: Adjustable via display LINEAR POSITION TRANSDUCER: NOVATECHNIK or TURCK PLC APPLICATION: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 7.5 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Stav: nový, Rok výroby: 2025, lisovacia sila: 80 t, zdvih: 500 mm, šírka stola: 700 mm, dĺžka stola: 700 mm, vzdialenosť medzi stĺpmi: 700 mm, sila zasunutia: 30 t, prevádzkový tlak: 250 lišta, Výbava: bezpečnostná svetelná závora, dokumentácia / manuál, CRONOSSTECH 80/30 TON FOUR-COLUMN HYDRAULIC DRAWING PRESS General Description The CRONOSSTECH 80/30 ton four-column hydraulic drawing press is an industrial press solution designed for applications requiring high precision in metal forming, deep drawing, and die testing. It features a four-column rigid frame structure. The St52 grade steel frame undergoes stress relief through a vibration method, ensuring high parallelism and perpendicularity tolerances during pressing operations. The ram and cushion systems operate independently; stroke and pressure settings can be precisely controlled from the operator panel. Fitted with REXROTH or PARKER hydraulic components, IE3 motor class, and PLC-controlled system, it offers safe, energy-efficient, and durable operation. The automatic lubrication system and filter contamination alerts minimize maintenance requirements. This model provides an ideal solution for small to medium series production, die testing, and precision forming applications. Key Advantages - Rigid four-column press frame structure - Independent stroke and tonnage settings for ram and cushion - Full control via touch panel - High repeatability and precision - Low maintenance costs, long service life Application Areas - Metal forming applications - Deep drawing processes - Die testing and prototype production - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-Column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs. Induction hardened, chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 80 Ton CAPACITY (CUSHION): 30 Ton DISTANCE BETWEEN COLUMNS: 700 × 700 mm PARALLELISM TOLERANCE: 120 micron/meter PERPENDICULARITY TOLERANCE: 60 micron/meter STROKE (RAM): 500 mm STROKE (CUSHION): 150 mm MIN. OPENING HEIGHT: 100 mm MAX. OPENING HEIGHT: 600 mm WELDING STRESS RELIEF: Vibration stress relief WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 11 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVING TABLE FAST DESCENT SPEED: 150 mm/s MOVING TABLE FORMING SPEED: 12 mm/s MOVING TABLE RETURN SPEED: 170 mm/s CUSHION TABLE ADVANCE SPEED: 30 mm/s MAIN CYLINDER BORE DIAMETER: Ø 200 mm – Ck45 CUSHION CYLINDER BORE DIAMETER: Ø 125 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROX. PRESS HEIGHT: 3300 mm APPROX. PRESS WIDTH: 1050 mm APPROX. PRESS DEPTH: 1050 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1100 mm PRE-FILL VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (Adjustable via panel) RAM / CUSHION STROKE & TONNAGE SETTING: Adjustable via panel SYSTEM & PRESS STATUS INFORMATION: Viewable on screen DIE MEMORY: Adjustable via panel LINEAR POSITION ENCODER: NOVATECHNIK or TURCK PLC: DELTA Crsdpfex N Ultjx Alyob TOUCH PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 5.5 Tons

Stav: nový, Rok výroby: 2025, lisovacia sila: 60 t, zdvih: 400 mm, šírka stola: 700 mm, dĺžka stola: 700 mm, vzdialenosť medzi stĺpmi: 700 mm, sila zasunutia: 20 t, prevádzkový tlak: 250 lišta, Výbava: bezpečnostná svetelná závora, dokumentácia / manuál, CRONOSSTECH 60/20 TON COLUMN-TYPE HYDRAULIC SPINNING PRESS General Description The CRONOSSTECH 60/20 ton column-type hydraulic spinning press is a rigid and compact press solution designed for precise metal forming, deep drawing, and spinning applications. Thanks to its four-column construction, parallelism and perpendicularity tolerances are consistently maintained throughout the pressing process. Codsx N Ulgepfx Alyerb The frame, manufactured from St52 grade steel, undergoes stress relieving via vibration method. Ram and pot systems can be controlled independently; stroke and pressure settings are precisely adjusted via the touchscreen panel. Featuring REXROTH or PARKER hydraulic components, IE3 motor class, and automatic lubrication system, the press ensures long-lasting, safe, and efficient operation. The PLC-controlled structure helps minimize operator errors. This model is the ideal solution for small and medium-scale spinning, deep drawing, die testing, and auxiliary pressing applications. Key Advantages - 4-column rigid press frame - Independent stroke and tonnage control for ram and pot - System adjustable via touchscreen panel - High accuracy and repeatability - Low maintenance requirements and long service life Applications - Metal spinning operations - Deep drawing processes - Die testing and prototype production - Metal processing and auxiliary production lines ⚙️ STANDARD AND TECHNICAL FEATURES TYPE: 4 Column FRAME MATERIAL: St52 – ERDEMIR COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs, induction-hardened and chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 60 Ton CAPACITY (POT): 20 Ton DISTANCE BETWEEN COLUMNS: 700 × 700 mm PARALLELISM TOLERANCE: 120 micron/meter PERPENDICULARITY TOLERANCE: 60 micron/meter STROKE (RAM): 400 mm STROKE (POT): 100 mm MIN. DIE OPENING: 100 mm MAX. DIE OPENING: 500 mm WELDING STRESS RELIEF: Vibration stress relieving WELDING APPLICATION: Accredited by TÜRK-AK, WPQR and WPS certified EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 7.5 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVING TABLE FAST DESCENT SPEED: 150 mm/sec MOVING TABLE SPINNING SPEED: 12 mm/sec MOVING TABLE RETURN SPEED: 170 mm/sec POT TABLE FORWARD SPEED: 30 mm/sec MAIN CYLINDER INNER DIAMETER: Ø 175 mm – Ck45 POT CYLINDER INNER DIAMETER: Ø 100 mm – Ck45 AUXILIARY SPEED-UP CYLINDERS: 2 units APPROXIMATE PRESS HEIGHT: 3100 mm APPROXIMATE PRESS WIDTH: 1050 mm APPROXIMATE PRESS DEPTH: 1050 mm LOWER TABLE HEIGHT FROM FLOOR: 1000 mm PRE-FILL VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (adjustable via screen) RAM / POT STROKE AND TONNAGE SETTING: Adjustable via screen SYSTEM & PRESS STATUS INFORMATION: Viewable via screen DIE MEMORY: Adjustable via screen LINEAR POSITION SCALE: NOVATECHNIK or TURCK PLC APPLICATION: DELTA TOUCHSCREEN PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 5 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stav: nový, Rok výroby: 2025, lisovacia sila: 600 t, zdvih: 1 000 mm, šírka stola: 1 200 mm, dĺžka stola: 1 500 mm, sila zasunutia: 200 t, prevádzkový tlak: 250 lišta, Výbava: bezpečnostná svetelná závora, dokumentácia / manuál, CRONOSSTECH CHSP 600/200 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Guideway General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting operating principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. The 8-guideway H-frame structure provides maximum rigidity during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the long stroke. The CHSP 600/200 model, with a 600-ton main ram and 200-ton lower cushion (pot) capacity, is designed to provide full control over the die and workpiece in high-tonnage deep drawing and spinning operations. The frame construction is stress-relieved by vibration for long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guideway H-frame press body - Frame stress-relieved by vibration - Bronze Zr14 slideway bearings - WPQR and WPS approved welding processes accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Monitorable hydraulic unit oil temperature and system status from display - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components Credpfsx N Uhzjx Alyob 📐 Technical Specifications – CHSP 600/200 Type: Steel construction, 8-guideway H-frame press body Frame Material: St52 – ERDEMİR Guideway Bearings: Bronze Zr14 Capacity (Ram): 600 Tons Capacity (Cushion): 200 Tons Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Stroke (Cushion): 350 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Stress Relief: Vibration stress relief Welding Application: WPQR and WPS approved/accredited by TÜRK-AK EN ISO 15614-1/2017 (Welding applications supervised by "welding coordination engineers" certified to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 55 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Cushion Table Forward Speed: 30 mm/s Main Cylinder Bore: Ø550 mm – Ck45 Cushion Cylinder Bore: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Height of Press: 5900 mm Approx. Width of Press: 3250 mm Approx. Depth of Press: 2300 mm Height of Lower Table from Floor: 1400 mm Front Filling Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Ruler: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approx. Weight: 35 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stav: nový, Rok výroby: 2025, lisovacia sila: 500 t, zdvih: 1 000 mm, šírka stola: 1 200 mm, dĺžka stola: 1 500 mm, sila zasunutia: 175 t, prevádzkový tlak: 250 lišta, Výbava: bezpečnostná svetelná závora, dokumentácia / manuál, CRONOSSTECH CHSP 500/175 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Gib Guided General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting working principle to provide controlled material flow in sheet metal forming, deep drawing, and spinning applications. Thanks to the 8 gib-guided H-frame structure, maximum rigidity is ensured throughout the pressing process; parallelism and perpendicularity tolerances are stably maintained along the full stroke length. The CHSP 500/175 model, with a 500-ton main ram and a 175-ton cushion (blankholder) capacity, is designed to provide full control over dies and parts in high-tonnage deep drawing and spinning operations. The frame construction is stress-relieved by vibration, ensuring long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8 gib guided H-frame body - Stress-relieved body by vibration - Bronze Zr14 slide bearings - WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - CE compliant design and manufacturing - PLC-controlled hydraulic system - Touchscreen control panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination alarm - Real-time monitoring of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 500/175 Type: Steel construction, 8 gib guided H-frame body Frame Material: St52 – ERDEMİR Gib Bearings: Bronze Zr14 Capacity (Ram): 500 Tons Capacity (Cushion): 175 Tons Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Stroke (Cushion): 350 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Stress Relief: Vibration stress relief Welding Process: WPQR and WPS certified by TÜRK-AK, EN ISO 15614-1/2017 (Welding operations are supervised by "welding coordination engineers" certified according to EN ISO 14731) Max. Working Pressure: 250 Bar Crjdpox N Uhuofx Alyeb Total Motor Power: 45 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/sn Moving Table Drawing Speed: 12 mm/sn Moving Table Return Speed: 170 mm/sn Cushion Table Forward Speed: 30 mm/sn Main Cylinder Bore: Ø500 mm – Ck45 Cushion Cylinder Bore: Ø300 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Machine Height: 5800 mm Approx. Machine Width: 3250 mm Approx. Machine Depth: 2200 mm Table Height Above Ground: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC System: DELTA Touchscreen Panel: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approximate Weight: 26 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stav: nový, Rok výroby: 2025, lisovacia sila: 400 t, zdvih: 1 000 mm, šírka stola: 1 200 mm, dĺžka stola: 1 500 mm, sila zasunutia: 150 t, prevádzkový tlak: 250 lišta, Výbava: bezpečnostná svetelná závora, dokumentácia / manuál, CRONOSSTECH CHSP 400/150 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting operation principle to provide controlled material flow in sheet metal forming, deep drawing, and spinning applications. Thanks to its 8-slide H-frame structure, the machine ensures maximum rigidity throughout the pressing process, maintaining stable parallelism and perpendicularity tolerances along the full stroke length. The CHSP 400/150 model is designed for deep drawing and spinning applications requiring high tonnage, offering a 400-ton main ram and a 150-ton blank holder (cushion) capacity. The machine’s frame construction is stress-relieved by vibration to ensure long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guideway H-frame press body - Stress-relieved frame by vibration - Bronze Zr14 guideway bushings - WPQR and WPS certified welding applications with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Live monitoring of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHSP 400/150 Type: Steel construction, 8-guideway H-frame press body Frame Material: St52 – ERDEMİR Slide Bushings: Bronze Zr14 Capacity (Ram): 400 tons Capacity (Cushion): 150 tons Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Stroke (Cushion): 350 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Weld Stress Relief: Vibratory stress relief Welding Application: WPQR and WPS certified by TÜRK-AK, EN ISO 15614-1/2017 (Welding operations are supervised by “welding coordination engineers” certified to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Cushion Table Forward Speed: 30 mm/s Main Cylinder Bore: Ø450 mm – Ck45 Cushion Cylinder Bore: Ø280 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Credpfx Ajx N Uhhslyob Approx. Press Height: 5600 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1400 mm Pre-Fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Encoder: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switching Components: SIEMENS – SCHNEIDER Approximate Weight: 24 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stav: nový, Rok výroby: 2025, lisovacia sila: 300 t, zdvih: 800 mm, šírka stola: 1 200 mm, dĺžka stola: 1 500 mm, sila zasunutia: 100 t, prevádzkový tlak: 250 lišta, Výbava: bezpečnostná svetelná závora, dokumentácia / manuál, RONOSSTECH CHSP 300/100 H-Type Hydraulic Deep Drawing (Metal Spinning) Press – 8-Guideway General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-action principle to provide controlled material flow for sheet metal forming, deep drawing, and spinning applications. The 8-guideway H-frame structure delivers maximum rigidity throughout the pressing operation, with stable parallelism and perpendicularity tolerances maintained over the entire stroke. The CHSP 300/100 model, featuring a 300-ton main ram and a 100-ton blankholder (die cushion) capacity, is engineered for high-tonnage deep drawing and spinning applications. The frame construction is stress-relieved by vibration for long life and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guideway H-frame type press body - Vibration stress-relieved frame structure - Bronze Zr14 slideway bearings - Welds certified and accredited by TÜRK-AK for WPQR and WPS (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing according to CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable main ram and die cushion stroke - Adjustable main ram and die cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic oil temperature and system status - Cooling system - Off-line filtration - Operator safety systems - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 300/100 Type: Steel construction, 8-guideway H-frame press body Frame Material: St52 – ERDEMİR Slideway Bearings: Bronze Zr14 Capacity (Main Ram): 300 Ton Capacity (Blankholder): 100 Ton Movable Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Main Ram): 800 mm Stroke (Blankholder): 300 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Stress-Relieving Method: Vibration stress-relief Welding Certification: Accredited by TÜRK-AK (WPQR and WPS) EN ISO 15614-1/2017 (Welds are supervised by "welding coordination engineers" certified to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Movable Table Fast Approach Speed: 150 mm/s Movable Table Drawing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Blankholder Forward Speed: 30 mm/s Main Cylinder Internal Diameter: Ø390 mm – Ck45 Blankholder Cylinder Internal Diameter: Ø230 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Machine Height: 4400 mm Approx. Machine Width: 3250 mm Approx. Machine Depth: 2200 mm Cjdpfx Aljx N Uhbsyjrb Lower Table Height from Floor: 1350 mm Pre-Fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Displacement Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touch Screen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 21 Ton Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Stav: nový, Rok výroby: 2025, lisovacia sila: 250 t, zdvih: 800 mm, šírka stola: 1 200 mm, dĺžka stola: 1 500 mm, sila zasunutia: 80 t, prevádzkový tlak: 250 lišta, Výbava: bezpečnostná svetelná závora, dokumentácia / manuál, CRONOSSTECH CHSP 250/80 H-Type Hydraulic Deep Drawing (Sheet Forming) Press – 8-Gib Design General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to provide controlled material flow for sheet metal forming, deep drawing, and drawing (spinning/flanging) applications. The 8-gib H-frame structure ensures maximum rigidity during pressing operations; parallelism and perpendicularity tolerances are stably maintained throughout the stroke. Crjdpfx Alex N Uaqoysb The CHSP 250/80 model, with a main ram capacity of 250 tons and a cushion/pot capacity of 80 tons, is designed for medium to high tonnage deep drawing and sheet-forming operations. The frame construction is stress-relieved via vibration to guarantee long service life and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-gib H-frame press body - Stress-relieved frame by vibration - Bronze Zr14 gib bearings - WPQR and WPS certified welding applications accredited by TURK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC controlled hydraulic system - Touch panel HMI (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - System and hydraulic oil temperature/status monitoring via display - Cooling unit - Off-line filtering - Operator safety systems - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 250/80 Type: Steel construction, 8-gib H-frame press Frame Material: St52 – ERDEMİR Gib Bearings: Bronze Zr14 Capacity (Ram): 250 Ton Capacity (Cushion/Pot): 80 Ton Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Ram Stroke: 800 mm Cushion Stroke: 300 mm Min. Table Distance: 100 mm Max. Table Distance: 900 mm Stress Relief: By vibration Welding Application: WPQR and WPS certified by TURK-AK Accreditation (EN ISO 15614-1/2017) (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) Maximum Operating Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/sec Moving Table Drawing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Cushion Advance Speed: 30 mm/sec Main Cylinder Bore: Ø360 mm – Ck45 Cushion Cylinder Bore: Ø200 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 4200 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Table Height from Floor: 1350 mm Pilot Operated Pre-fill Valve: NG 125 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Displacement Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 18 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Stav: nový, Rok výroby: 2025, lisovacia sila: 200 t, zdvih: 800 mm, šírka stola: 1 000 mm, dĺžka stola: 1 200 mm, sila zasunutia: 70 t, prevádzkový tlak: 250 lišta, Výbava: bezpečnostná svetelná závora, dokumentácia / manuál, CRONOSSTECH CHSP 200/70 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Gibbed General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed based on a double-acting working principle to ensure controlled material flow during metal sheet forming, deep drawing, and forming operations. Thanks to the 8-gibbed H-frame structure, maximum rigidity is achieved during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the stroke. The CHSP 200/70 model, with a 200-ton main ram and a 70-ton cushion (blank holder) capacity, is designed for medium to heavy-duty deep drawing and forming operations. The frame construction is stress-relieved by vibration methods for long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-gibbed H-frame press type - Vibration stress-relieved frame structure - Bronze Zr14 gib bearings - WPQR and WPS certified welding procedures accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacture in accordance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter contamination warning - Monitoring of hydraulic unit oil temperature and system status from the screen Cedpox N T U Tjfx Alyorb - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 200/70 Type: Steel construction, 8-gibbed H-frame press type Frame Material: St52 – ERDEMİR Gib Bearings: Bronze Zr14 Capacity (Ram): 200 Ton Capacity (Cushion): 70 Ton Moving Table Dimension: 1000 × 1200 mm Fixed Table Dimension: 1000 × 1200 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 800 mm Stroke (Cushion): 300 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Weld Stress Relief: Via vibration Weld Application: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1:2017 (All welds are supervised by ISO 14731-certified "welding coordination engineers") Max. Working Pressure: 250 Bar Total Motor Power: 22 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Moving Table Fast Descent: 150 mm/s Moving Table Forming Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Cushion Table Forward Speed: 30 mm/s Main Cylinder Bore: Ø320 mm – Ck45 Cushion Cylinder Bore: Ø190 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approximate Height: 3800 mm Approximate Width: 2950 mm Approximate Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Screen: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approximate Weight: 13.5 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stav: nový, Rok výroby: 2025, lisovacia sila: 150 t, zdvih: 600 mm, šírka stola: 1 000 mm, dĺžka stola: 1 200 mm, sila zasunutia: 50 t, prevádzkový tlak: 250 lišta, Výbava: bezpečnostná svetelná závora, dokumentácia / manuál, CRONOSSTECH CHSP 150/50 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to provide controlled material flow in sheet metal forming, deep drawing, and spinning applications. Thanks to the 8-guideway H-frame structure, maximum rigidity is maintained throughout the pressing operation, ensuring stable parallelism and perpendicularity tolerances during the stroke. The CHSP 150/50 model, with a 150-ton main ram and 50-ton cushion ram (pot) capacity, is designed for precision and repeatable deep drawing operations. The frame construction is stress relieved by vibration, aiming for durable and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guideway H-frame press design - Stress-relieved frame structure by vibration - Bronze Zr14 guideway bearing system - WPQR and WPS certified welding applications with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHSP 150/50 - Type: Steel construction, 8-guideway H-frame press Codpfx Alox N T U Hjysrb - Frame Material: St52 – ERDEMİR - Guideway Bearing: Bronze Zr14 - Capacity (Ram): 150 Ton - Capacity (Cushion/ Pot): 50 Ton - Moving Table Size: 1000 × 1200 mm - Fixed Table Size: 1000 × 1200 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Stroke (Ram): 600 mm - Stroke (Cushion/ Pot): 200 mm - Min. Daylight: 100 mm - Max. Daylight: 700 mm - Stress Relieving: Vibration stress release - Welding Application: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1/2017 (Welding applications are supervised by "welding coordination engineers" certified to EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 18.5 kW – IE3 - Main Pump: 32 cm³ – REXROTH or PARKER - Moving Table Rapid Descent Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Cushion Table Forward Speed: 30 mm/sec - Main Cylinder Bore: Ø280 mm – Ck45 - Cushion Cylinder Bore: Ø160 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 3650 mm - Approx. Press Width: 2950 mm - Approx. Press Depth: 2000 mm - Bottom Table Height from Floor: 1250 mm - Pre-fill Valve: NG 100 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC Application: DELTA - Touch Panel Display: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 11 Ton Production Note This machine is manufactured in Turkey by CRONOSSTECH.