Then - kúpiť použité (197)

Stav: nový, Rok výroby: 2025, prevádzkové hodiny: 3 h, Funkcionalita: plne funkčný, posuv osi X: 7 m/min, hmotnosť obrobku (max.): 1 000 kg, pracovná šírka: 2 500 mm, objemový prietok: 8 000 m³/h, rok poslednej generálnej opravy: 2025, celková hmotnosť: 3 200 kg, typ vstupného prúdu: trojfázový, priechodová výška: 210 mm, celková výška: 2 350 mm, celková dĺžka: 2 450 mm, celková šírka: 3 500 mm, pracovná výška: 950 mm, Ceetec DuoFlex Spray – The Coating Machine for Joiners, Furniture Makers, CLT and Glulam Suppliers, and Much More. Wherever a solid, straightforward yet exceptionally well-equipped machine is needed, the DuoFlex Spray Automatic Flatbed Sprayer comes into play. Coating can be so simple—not only when you have a robust, long-lasting coating machine (made in Denmark, electronics from Germany such as Beckhoff and others), but especially one that puts you, the operator, at the center: Everything is intuitive and easy to use, yet you benefit from features you’ll search for in vain—or only find in much higher price segments—on other machines. Here are some key facts about the DuoFlex Spray automatic flatbed sprayer: 1. Paint changeover in just 3–5 minutes 2. System volume only 2.5–3L of paint/lacquer 3. Suitable for solvent-based and water-based materials 4. Two fully separated circuits: For water/solvent or clear coat/coloured lacquer 5. Maximum reproducibility: Thanks to intelligent programs that automatically save ALL vital parameters. 6. Easy to learn: After just 4–6 hours of training, even a baker can spray better than a manual painter with 10 years of experience. 7. Modular expandability: Drying system, sanding automation, pre-heating, robotic handling – all from one source. 8. Service: We know our field. Our owner was a coatings manager for almost 10 years and brings this hands-on expertise to ensure your success even after purchase. The machines are extremely robust and durable, but should anything arise, we maintain a well-stocked spare parts warehouse in Germany and Denmark. DuoFlex Spray Coating Machine Processing Dimensions: 1. Standard: 1,300 mm width x 200 mm height 2. Larger: 1,800 mm width x 200 mm height 3. Up to: 3,200 mm width x 330 mm height Length: From 250 mm to virtually unlimited. If you wish to coat GLT ceiling panels that are 16, 18, or 20 meters long, we simply build the right automation solution for you. Does that sound interesting? Would you like to try the machine in our technical center? Do you have specific requirements and are unsure if we can meet them? Then I would be pleased to assist you personally! Sincerely, Hfjdpfsffc Tysx Agkjh Martin Bruhn Owner, Bruhn Coating Systems // Exclusive Sales Partner for ceetec A/S – Middelfart, Denmark.

Stav: dobrý (použitý), Rok výroby: 2020, prevádzkové hodiny: 200 h, Funkcionalita: plne funkčný, celková výška: 4 820 mm, celková šírka: 15 000 mm, celková dĺžka: 20 000 mm, typ vstupného prúdu: Klimatizácia, vstupné napätie: 400 V, SOCO SYSTEM End-of-Line Packaging Line with Robot Palletizer, Carton Erectors & Sealers (Year of Manufacture 2020) This offer includes our complete SOCO SYSTEM shipping and end-of-line packaging line, exactly as it was installed in our facility. The system is fully functional, well-maintained, and was used up until recently for pallet shipping. This line is ideal for businesses with high shipping or packaging volumes that require automated, efficient, and modular packaging processes. The system can be acquired in whole or in part upon request – we are happy to provide consultation for optimal configuration. Technical Specifications / Components 2 x Carton Erectors BE-2300 ATS and BE-2200 ATS Automatic carton erectors for folding and gluing bottom flaps (self-adhesive tape B = 50 mm). Longitudinal Flap Opener For precise feeding and alignment of cartons on the main conveyor. Powered Conveyor & Labelling Lines Roller conveyors, curves, and distribution sections with integrated label application. Carton Sealer T-4000 with Tape Alarm Automatic sealing of carton tops with self-adhesive tape. Labeller LOGOPAK Logomatik 415-T (integration ready) Transfer for automatic carton labelling and inspection via scanner. Palletizing Robot SOCO PRS-LRS-1218-H3 Industrial robot for fully automated palletizing according to custom patterns. Pallet Magazine for 14 Pallets Automatic provision of empty pallets. Safety Equipment: Swing doors / light curtains, emergency stop interlocking, Type 2 control, controller, CE certification. Additional Modules: T-55 with conveyor and ball table, F-100 + T-2000 conveyor systems, custom RAL 9006 finish. Complete installation, factory pre-commissioning, assembly, and commissioning included (original system price according to SOCO SYSTEM quote: €243,700). Function Description The line automatically erects cartons, tapes the base, feeds them onto the main packaging conveyor, closes the top, labels and inspects them. Faultless cartons are then picked up by the robotic palletizer and stacked according to predefined pallet layouts. The entire system is modular and can be integrated into existing production or shipping workflows. Hfedpfx Agjxdb Saskjh General Information Year of manufacture: 2020 Manufacturer: SOCO SYSTEM A/S Condition: used / very good / immediately available Location: Norderstedt (near Hamburg) Scope of delivery: complete shipping line including robot, sealer, and conveyor technology

Stav: dobrý (použitý), Rok výroby: 2020, prevádzkové hodiny: 200 h, Funkcionalita: plne funkčný, celková šírka: 700 mm, celková dĺžka: 800 mm, celková výška: 2 297 mm, typ vstupného prúdu: Klimatizácia, You will find this and other machines that were part of our shipping line in our listings. If you are looking for a complete solution in this area, or just need several components, please feel free to contact us and we will get back to you promptly. Brief overview of the shipping line and where the offered item was used: The shipping line was used for pallet dispatch. That means cartons were erected (SOCO ATS 2300 + 2200) and sealed at the bottom, then packed on the main shipping line. The finished packages were sealed at the top by a carton sealer (SOCO T-4200) and transferred to a labeler (LOGOPAK LOGOMATIC 415-T). Once the Logomatic scanner approved the parcels, they were passed on to the palletizing robot (SOKO PRS-LRS-1218-H3) to assemble a pallet according to our specified sizes. In our video, you can see the entire shipping line in operation. The item for sale is the LOGOMATIC 415-T labeler from LOGOPAK (marked in the blue circle in the layout image). Summary of all relevant technical specifications for the LOGOMATIC 415 T labeling system: • Machine type: LOGOMATIC 415 T • Print resolution: 300 dpi (12 dot) • Cycle rate: Maximum 20 products per minute • Operation: HMI (10-inch color LC display) in German Hfedpfexdcv Hex Agkjh • Signal lamp: 3-color status indicator (red, blue, green) available • Frame: Standard frame with stainless steel spindle-mounted feet (±50 mm adjustable) • Certification: CE certified (EU) • Power supply: 230V AC / 50 Hz (L,N,PE). The supply voltage should not fluctuate by more than ±5% and must be free from interference. • Power consumption: Maximum approx. 1400 VA • Power connections at installation site: 1x Schuko socket for the labeler and 1x Schuko socket for maintenance purposes • Compressed air: 6 bar, dry and oil-free. The air supply must be permanently installed up to approx. 1 meter before the device • Compressed air consumption: Approx. 250 l/min • Compressed air connection: ½'' fixed line with FESTO quick coupling KD4-½-A and coupling plug KS4-CK-6 • Temperature: Ambient temperature for the labeler should be between +5°C and +37°C. For processing PE labels, a temperature of 25°C is recommended • Applicator stroke length (net): 350 mm, defines the working range for various carton heights • Labeling height: 800 mm (standard setting) • Orientation: Horizontal, labeling from above • Label unwind/carrier material take-up: For rolls up to 600 m length • Label core adapter: 152 mm (6 inches) • Current format (Amazon): 60 mm width x 40 mm height • Future shipping label: Approx. 100 mm width x 200 mm height (these dimensions can vary, depending on label size needed) • Label gap: 8 mm • Printing process: Thermal transfer • Label material: Paper labels (Paper Economy TT) • Ribbon (TTR): Wax quality • Interface: Ethernet (10/100 Mbit). A serial RS-232C interface is also available • Data protocol: ZPL (Zebra) • Data source: Host system • Data transmission: The data to be printed is sent from a PC via Ethernet to the labeler

Stav: použitý, Rok výroby: 2009, Funkcionalita: neoverené, číslo stroja/vozidla: 1-1028-09, merací rozsah os X: 400 mm, merací rozsah osi Y: 400 mm, merací rozsah osi Z: 200 mm, hmotnosť obrobku (max.): 30 kg, celková výška: 1 663 mm, celková šírka: 910 mm, celková dĺžka: 1 232 mm, celková hmotnosť: 30 kg, Výbava: dokumentácia / manuál, We offer this used Mahr / Hexagon Optiv Performance MS 442 coordinate measuring machine, year of manufacture 2009. The machine was factory overhauled in 2023 and has seen very little use since then. Serial number: 1-1028-09 Measuring range: 400x400x200mm Dimensions: 910x1232x1663 Weight: 940kg Maximum workpiece weight on the glass plate: 30kg Incl. camera with 2-step zoom Incl. measuring laser Incl. LED ring light Accuracy: Length measurement deviation: according to VDI/VDE 2617-6.1 MPEE1: 1.4μm+L/200mm MPEE2: 1.5μm+L/150mm Incl. 19" CNC real-time controller based on Windows 10 (32-bit) upgrade kit Incl. Renishaw PI200 probe interface Incl. Renishaw TP200 probe body Incl. Renishaw probe holder Hjdsyf N Iyjpfx Agkefh Incl. various probes & heads Incl. OptiChek3D software If you have any questions or require further information, feel free to send us a message.

Stav: nový, Rok výroby: 2025, Are you looking for quality and expertise for your sheet metal processing machine? Then we are the right partner by your side. Those who know us know that we are a reliable company :) PRESS BRAKE 2.64 m / 1.2 mm Hjdpfx Asdad Adsgkofh New machine. Warranty: 12 months. We deliver the goods with our own truck. CE Certificate Eccentric force transferred to both sides of the machine Working length: 2640 mm STEEL SHEET 1.2 mm Up to 30% higher bending capacity for non-ferrous metals Bending beam: 24 mm Bending angle: 145 degrees Weight: 350 kg Cutting across the entire working length Lifting the upper beam in three stages Maximum clear opening between beams: 80 mm Rear support frame for holding sheet metal, angle gauge, degree scale, gas pressure damper Front cutting gauge for ensuring preset cutting widths Payment terms: Cash on delivery Price: €2,400 Delivery costs: €240 Delivery time: Every week Rotary shear 0.8 mm for an additional €350 We look forward to hearing from you! Invoices are issued with 0% VAT as intra-community delivery or with an additional 19% VAT.

Stav: použitý, číslo stroja/vozidla: 1433A, najazdené kilometre: 52 734 km, výkon: 90 kW (122,37 k), prvá registrácia: 07/1994, typ paliva: benzín, kombinovaná spotreba paliva: 14 l/100 km, farba: zelený, typ prevodu: automatický, emisná trieda: euro1, Výbava: pohon všetkých kolies, prípojné zariadenie, TÜV and emissions inspection (AU) will be newly done, and you’ll get a green environmental badge :-) Special army version with long wheelbase, this Mercedes G is in excellent condition—bodywork is also in superb shape (almost like new! Unbelievable how the Swiss keep them)! The hardtop is made of plastic, the interior dimensions are L/W/H 1760/1520/1550 mm. Ready for immediate use, coming directly from the military, very well maintained and serviced! Features include: 2850 mm wheelbase, 4-speed automatic transmission plus low range, all-wheel drive, one G is equipped with a military trailer hitch (this will not be approved by TÜV, but for €250 we can fit a ball hitch with up to 3,500 kg towing capacity), 4-cylinder petrol engine with 2299 cc displacement, fuel consumption on the motorway is about 13 L/100 km and just under 15 L/100 km on short trips (info from my customers), rear axle differential lock; several of these G-models are in stock—truck registration is also possible (then only 2 seats in the front), good tires 205R16, and much more. We also have some accident vehicles in stock at attractive prices! Ideal as a rally or hobby vehicle. I also have the appropriate single-axle off-road trailer with overrun brake for the G; various other all-wheel-drive and military vehicles are available as well. All my vehicles are listed on my website padh. So, you’re running back and forth across Germany from Flensburg to Berchtesgaden to look at different vehicles, but here you’ll find over 150 vehicles of the following types: Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc.—all available with TÜV! Plus, there’s an unbelievable range of spare parts and accessories. Why settle for less? Call me: 0049 (0)2248. Best regards, your Philipp from Hanfbachtal. Hfedpeqx Sx Nsfx Agksh

Stav: použitý, číslo stroja/vozidla: 1391A, najazdené kilometre: 6 678 km, výkon: 90 kW (122,37 k), prvá registrácia: 05/1995, typ paliva: benzín, spotreba paliva (mestská prevádzka): 14 l/100 km, farba: zelený, typ prevodu: automatický, emisná trieda: euro1, Výbava: centrálne zamykanie, pohon všetkých kolies, prípojné zariadenie, TÜV and AU will be renewed and the vehicle receives a green environmental badge :-) Special army version with long wheelbase, this Mercedes G is in excellent condition, the bodywork is also in excellent condition (almost like new! ! ! It's unbelievable how the Swiss maintain their vehicles), the convertible top can be quickly converted from a passenger car with 8 seats to a pick-up with 2 seats, the odometer readings range from 1,461 km to 85,429 km (read from display), approximately 10 vehicles of this specification are in stock, interior dimensions are L/W/H 1760/1520/1250 mm, immediately operational, directly from the military, very well maintained and serviced! Equipped with: 2850 mm wheelbase, 4-speed automatic transmission plus low-range gearing, all-wheel drive, one vehicle features a military trailer coupling, TÜV will not approve for trailer operation, but on request, a ball hitch can be supplied for an extra €250, 4-cylinder petrol engine with 2,299 cc displacement, fuel consumption on the motorway is approx. 13 liters per 100 km and just under 15 liters on short trips (according to customer feedback), rear axle differential lock, (truck registration possible, then only 2 front seats), good 205R16 tires, and much more. We also have some accident vehicles in stock at attractive prices! Ideal as a rally or hobby vehicle, also perfect for hunting. Also available is a matching single-axle off-road trailer with overrun brake. Several other all-wheel-drive and military vehicles are still available. All my vehicles can be viewed on my website. So, instead of rushing back and forth across Germany to check out different cars, here you find over 150 vehicles including: Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Class, Mowag, Mercedes-Benz, etc., all with TÜV! In addition, an unbelievable number of spare parts and accessories are available. Why would you... Hfsdpfx Aoqx Sxhsgkeh

Rok výroby: 2020, stav: nový, T-Shape 3 in1 Multisystem // Year of manufacture 2020 T-Shape combines 3 powerful technologies that work simultaneously to stimulate collagen production, significantly reduce local fat volume, and improve skin elasticity. It enables deep and immediate enhancement of blood circulation and lymphatic drainage, which in turn improves physical fitness. Hsderxri Sspfx Agkjfh - Skin tightening - Cellulite reduction - Reduction of fat deposits - Circumference reduction - Post-liposuction treatments - Facial lifting and skin tightening RF (Radio Frequency) T-Shape generates bipolar, quadripolar, and hexapolar radio frequency signals. When RF energy comes into contact with tissue impedance, heat is generated. With correct heating, the collagen-rich dermis is instantly denatured, fibrils contract and thicken. As a response to initial heating, new collagen is produced, resulting in skin that appears firmer, tighter, and more youthful. Vacuum Suction T-Shape features vacuum therapy technology with variable pulse modes. The vacuum lifts, folds, and compresses the skin to increase local blood circulation and stimulate lymphatic drainage. It promotes fibroblast activity and supports vasodilation. LLLT Laser As the LLLT laser irradiates the adipose tissue, it contributes to the formation of temporary micropores in the fat cells and accelerates the fragmentation of triglycerides into glycerol and fatty acids, which can then escape from the cell, reducing its volume. The released lipids are eliminated via normal metabolic processes. LLLT effectively reduces body circumference at treated areas and has also proven effective in reducing edema. Technical Data Supply voltage: 220/230 Vac 50/60 Hz Power consumption: 1300 W Weight: 45 kg Dimensions: 348x513x1008 mm Low-power laser wavelength: 760 nm Laser class: 3 R Laser density: 8MW/cm² Frequency of bipolar radio frequency: 1500 kHz (1.5 MHz) Maximum RF power: Less than 25 W Max. stimulated suction value: Less than 80 kPa (0.8 bar) Item condition: used, good condition Financing through our partner bank is also possible. komplett-konzept.leasingo.de More new and used items available in our shop! International shipping costs on request!

Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, Rok výroby: 2019, prevádzkové hodiny: 250 h, číslo stroja/vozidla: 0131, typ ovládania: NC riadenie, stupeň automatizácie: poloautomatický, typ ovládania: hydraulický, Priemer rúry (max.): 48 mm, Dĺžka potrubia (max.): 3 000 mm, Maximálna hrúbka steny rúrky: 4 mm, Uhol ohybu (max.): 180 °, celková hmotnosť: 670 kg, vstupné napätie: 400 V, vstupná frekvencia: 50 Hz, počet digitálnych displejov: 1, Výbava: Označovanie CE, centralizovaný mazací systém, dokumentácia / manuál, núdzové zastavenie, T U B O M A T – simply smart. TUB-C G3001 The pipe bending machine is ideally suited for single parts and small batch production. With the included software, individual pipes can be parameterized, simulated, and saved. Bending data is then transmitted to the machine via network (LAN). Hfodex E Rdwepfx Agkjh Standard Features – Bending - Electronic Siemens SIMATIC control system - Function selection and operation via 4.3-inch touch panel - Well-known 4-step bend angle preselection or programmable mode - 80 memory slots for up to 10 sets - Actual/target value display for bend angles - Compact, forward-positioned bending head - Optimized tool concept - Hydraulic bending drive, operated via proven hand lever - Hydraulic pipe clamping - Hydraulic pressure die positioning - Hydraulic mandrel extraction - Mobile machine use - Sawing unit for precise right-angle cuts - Deburring unit for internal and external deburring - Universal base mount as a drive unit for mounting attachments Technical Data - Pipe range up to: 48.3 x 3.25 mm (E235 with Rm = 2 x D) - Bending radius up to: 125 mm - Control: electronic - Maximum bending angle: 180° (+10° overbending) - Bending accuracy: ± 0.2° - Bending speed: 20°/s - Dimensions (L / W / H): 3880 / 800 / 1250 mm - Weight: approx. 700 kg - Power: 2.4 kW - Connection data: 400 V / 50 Hz / 3 phases - Power protection: CEE 16 A - Color: RAL 9006 / 7021 / 5015 Software (Windows 11) Pipe bending software PIPEFAB 4.0 BE Basic Package - Oracle Express database for single-user application - Create isometrics (single pipe) - ConCSVImp – CSV import interface - Calculation of bending data accounting for springback, elongation, and compensation - Checking clamping lengths, start and end lengths - Output of bending data (printout) - BendSim – bending simulation and graphical representation via parametric tool layout - BendCon – creation and transfer of NC bending data for TUBOMAT - Data transfer via LAN Tool Holders 1 adapter set for bending rollers with 25 mm mounting hole 1 clamp adapter with 100 mm installation space 1 mount for stationary pressure die, 100 mm installation space Tools Bending tools consisting of bending die, clamp piece, and stationary pressure die Tube Diameter / Bending Radius - Ø8.0 mm R=20 mm - Ø10.0 mm R=20.5 mm - Ø12.0 mm R=24.0 mm - Ø15.0 mm R=30.0 mm - Ø16.0 mm R=32.0 mm - Ø18.0 mm R=36.0 mm - Ø20.0 mm R=40.0 mm - Ø22.0 mm R=44.0 mm Bending Mandrels 3000 mm for Steel Pipes Design with lubrication channel for minimum-quantity oil lubrication - 18.0 mm x wall thickness - 20.0 mm x wall thickness - 22.0 mm x wall thickness Pre-assembly Stubs for Cutting Ring Connections (L = light, S = heavy duty) Pipe Ø - 6 mm L - 6 mm S - 8 mm L - 8 mm S - 10 mm L - 10 mm S - 12 mm L - 12 mm S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Counterhold Plates for Cutting Ring Pre-assembly with Automatic Pressure Adjustment for Steel and Stainless Steel Pipes Pipe Ø - 6 mm L + S - 8 mm L + S - 10 mm L + S - 12 mm L + S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Additional pipe diameters and wall thicknesses available. The machine is used but is in excellent, like-new condition. Viewing and demonstration available by appointment. Machine must be picked up from our location, but loading can be arranged. Commercial sale only. Price plus 19% VAT. Subject to prior sale and errors.

Stav: nový, maximálna hmotnosť nákladu: 36 400 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment. Full specification available on request. Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 6° * For tractor units: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX at the front junction box with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for controlling hydraulic functions, except for hydraulic winches. Without installation of supply connections on the tractor unit * Gooseneck outer beams with mounting holes for screw-in lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * One mounting hole at the top rear of the gooseneck’s outer beams for a screw-in lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * 3 pairs of recessed lashing rings inside the gooseneck outer beam (LC 5,000 daN) * 3 pairs of recessed lashing rings in the middle of the gooseneck (LC 5,000 daN) * 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) * Grating surface with 5 mm steel plate reinforcement on the gooseneck and rear taper * 2'' kingpin * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * Spiral cable (approx. 35 mm², approx. 3.5 m) to supply the electro-hydraulic unit and/or electric winch between trailer and tractor unit with plug (NATO-NATO) * 1 pair of removable ALU sideboards on the gooseneck, approx. 400 mm high, anodized finish LOADING PLATFORM: * Loading platform, approx. 9,600 mm long, with rear taper approx. 900 mm x 6° Hjdpfx Asyhkqujgksfh * Section after gooseneck hydraulically liftable and lowerable, approx. 3,000 mm, load capacity up to approx. 9,000 kg * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle rear steering. 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: each 12,000 kg * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires, brand of our choice, load index 143/141J (144/144F) * Mechanical landing gear with 2-speed gearbox and crank * Continuous grating surface with approx. 5 mm steel plate reinforcement for extra strength, designed for point loads: on the lift bed and on the loading platform * Painted sand coating on the cover plates of the gooseneck as well as transition areas between neck and lift bed, lift bed and loading platform, as well as between loading platform and ramps * 1 mounting adapter for spare wheel under the loading platform on the right in front of axles * Cut-outs in the outer frame of the loading platform and lift bed for hanging tie-down straps (LC 2,000 daN) * 11 pairs of recessed fold-out lashing rings in the outer frame of the loading platform (LC 10,000 daN): - 3 pairs in the outer frame of the lift bed - 8 pairs in the outer frame of the loading platform * 11 pairs of recessed lashing rings along the central beam (LC 5,000 daN): - 3 pairs in the lift bed - 8 pairs in the rear section of the loading platform * Control valves for the hydraulic ramps on the right side of the vehicle * 1 pair of foldable mechanical rear supports, single-hand operation HYDRAULIC LOADING RAMPS: * 1 pair of two-piece AXS steel ramps with length approx. 4,920 mm and a

Stav: dobrý (použitý), Sartorius Stedim biotech BioWelder 16370 The BioWelder operates using a thermal welding cycle that does not require laminar flow. During this welding process, the blade remains sterile and free from endotoxins throughout the entire procedure. The inserted tubes are cut with a blade and then fused together inside the unit. The cycle is fully automated and only allows access once the process has been completed. Various programmable holders enable the welding of thermoplastic tubing of the same type (e.g. C-Flex, Sanipure, Pharmed) with outer diameters ranging from 6.4 mm (1/4") to 19.0 mm (3/4"). Features: - Fully automatic operation - Welds thermoplastic tubing up to 3/4” outer diameter - Pre-installed settings for C-Flex, Raumedic FluiSoftTM, AdvantaPure, AdvantaFlex, Pharmed and Sanipure tubing - True thermal weld for superior bond strength - Aseptic connections without the need for laminar flow hoods - Data output via printer - Compact and portable design - Simple validation with validation tools - Capable of welding a wide range of tube diameters Includes: Tube holder SH1 5/8″ 15.9 mm OD inserts (1 set) Manufacturer specifications: - Housing: Stainless steel - Interface: RS232 for printer connection Hfodpfx Ajkq Ay Ijgkoh - Blade: Cr-Ni alloy, single use - Ambient temperature: 20°C–30°C (ideal: 22°C) - Relative humidity: 20%–80% (ideal: 60%) - Temperature sensor: Type K, calibrated - Max. tube OD: 3/4″ - Min. tube OD: 1/4″ - Welding cycle: 60–90 seconds, depending on tube dimension Further BioWelder units – new and used – can be found in our shop! International shipping rates available upon request!

Stav: nový, maximálna hmotnosť nákladu: 25 300 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website. Selection of equipment. Full equipment details available upon request. Gooseneck * Gooseneck in SNT design to optimize loading platform length * Length approx. 3,750 mm, hydraulically liftable/lowerable and detachable gooseneck * Technical fifth wheel load: 25,000 kg. Suitable for tractors: 4 x 2 and 6 x 2 Hfodpfxov Sw E Ae Agkeh Beam Deck * Lowbed designed as an extendable vessel bridge in SUPER LOW design * Length approx. 6,850 mm * With mechanical locking * Supply lines are protected within the extendable beams and automatically adjust to the respective lowbed length Rear Chassis * Short version with closed outer frame and checker plate covering * Chassis includes an excavator trough, which is closed at the rear half to accommodate the air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tyres. Load index 143/141J (146/146F) Braking System * Brand: WABCO, EBS-E according to EU regulations, WITHOUT connecting cable to the tractor unit Paintwork * 6-stage final treatment * Complete steel structure shot-blasted after welding * 1 coat of zinc primer * 1 coat of adhesion primer. Final paint with 2 coats of 2-pack (acrylic) paint in a single color, followed by cavity sealing with special wax Trailer Color * RAL 3002 Carmine red * Rim color: Silver grey * Side wall color: Natural aluminum Included Accessories * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit to control hydraulic operations, except for hydraulic winches. Without installation of supply connections on the tractor * Mounting adapter for 1 spare wheel in front of the gooseneck's front wall * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear bevel of the gooseneck (LC 6,000 daN) * 2" king pin * Hydraulic crossbeam to support the gooseneck on the tractor unit or a dolly * Air connection with air gun on the gooseneck * 1 pair of steel ramps with climbing profiles and locking bolts to bridge the lowbed's hooks * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * On the outer beams of the loading platform, preparation for removable floor panels * Lashing rings with retaining spring approx. every 1,200–1,300 mm outside on the inner beams of the platform * Lashing rings with retaining spring approx. every 1,200–1,300 mm outside on the outer beams of the loading platform (LC 10,000 daN) * Cut-outs on the top flange of the outer beams above the lashing rings * Mechanical pin-tab coupling from lowbed to chassis for exchangeable loading platform or installation of extension beams. Includes electro-pneumatic-hydraulic couplings * Outer beams of the lowbed coated with non-slip sand layer * 2nd driving height for upper drive position, max. ±50 mm from normal driving position, without controls installed on the tractor * 1 pair of lashing rings with retaining spring at the transition from the lowbed to the excavator trough (LC 10,000 daN) * Bevel front and rear a

Stav: dobrý (použitý), Rok výroby: 1990, prevádzkové hodiny: 12 332 h, Funkcionalita: plne funkčný, číslo stroja/vozidla: 1684, celková dĺžka: 5 000 mm, celková šírka: 2 350 mm, celková výška: 3 500 mm, vstupné napätie: 400 V, typ vstupného prúdu: trojfázový, tlak: 7 lišta, vykurovací výkon: 63 kW (85,66 k), prevádzkový tlak: 7 lišta, BvL cleaning system / washing system Hot wash system Chamber / trolley dimensions: 2200 x 800 x 900 mm Was in operation until 04/25, then cleaned and decommissioned. Hsdpfsw Dpk Hex Agkofh Will be dismantled in July 2025. Trolley for suspending components included. Various spare parts are available and included in the sale. See drawing and photos for more details. For further information, please feel free to contact me.

Stav: pripravené na použitie (použité), Funkcionalita: plne funkčný, číslo stroja/vozidla: UB421, najazdené kilometre: 154 542 km, výkon: 95 kW (129,16 k), prvá registrácia: 01/2009, typ paliva: nafta, pohotovostná hmotnosť: 4 010 kg, maximálna hmotnosť nákladu: 1 990 kg, celková hmotnosť: 6 000 kg, konfigurácia náprav: 4x2, ďalšia kontrola (TÜV): 01/2027, palivo: nafta, farba: oranžová, typ prevodu: automatický, emisná trieda: Euro 4, počet sedadiel: 6, dĺžka ložného priestoru: 2 950 mm, šírka ložného priestoru: 2 200 mm, výška ložného priestoru: 1 450 mm, Výbava: ABS, airbag, naklápacia vozík, posuvné dvere, sadzový filter, uzávierka diferenciálu, MB Vario 613 D Tipper Double cab with 6 seats Vehicle from first owner Ex-municipal / government vehicle Low emission Euro 4 (BlueTec4) Green environmental sticker Automatic transmission Twin-tired rear axle Rear axle differential lock Former city service vehicle Amber beacon lights Isri comfort driver’s seat Power steering Driver airbag Electric exterior mirrors Radio with CD Roof hatch (Swedish hatch) Load bed dimensions in mm L: 2150/2950 W: 2200 H: 1450 The load bed is divided into two compartments: 1x 2150L, 1x 800L, but can be converted into one loading space – then 2950L Payload: 1,990 kg Unladen weight: 4,010 kg Gross vehicle weight: 6,000 kg Wheelbase: 3,700 mm Immediately operational Hfodpsrpmwkjfx Agkjh Errors, changes, and prior sale reserved We sell exclusively according to our terms and excluding any warranty whatsoever. Errors, changes, and prior sale reserved. We are available continuously Monday to Friday from 9:00 am to 5:00 pm, Saturday by appointment. Outside these opening hours, appointments can be arranged by phone. We are happy to accept your current used equipment/vehicle as trade-in. Priority is given to sales to commercial customers and exporters; this applies to our entire vehicle inventory. The information given above is non-binding, subject to errors, changes, and prior sale!

Stav: použitý, Funkcionalita: plne funkčný, číslo stroja/vozidla: UB421, najazdené kilometre: 154 542 km, výkon: 95 kW (129,16 k), prvá registrácia: 01/2009, typ paliva: nafta, pohotovostná hmotnosť: 4 010 kg, maximálna hmotnosť nákladu: 1 990 kg, celková hmotnosť: 6 000 kg, konfigurácia náprav: 4x2, ďalšia kontrola (TÜV): 01/2027, palivo: nafta, farba: oranžová, typ prevodu: automatický, emisná trieda: Euro 4, počet sedadiel: 6, dĺžka ložného priestoru: 2 950 mm, šírka ložného priestoru: 2 200 mm, výška ložného priestoru: 1 450 mm, počet predchádzajúcich vlastníkov: 1, Výbava: ABS, airbag, posuvné dvere, sadzový filter, uzávierka diferenciálu, MB Vario 613 D Tipper Double cab with 6 seats Vehicle from first owner Ex-municipal / government vehicle Low emission Euro 4 (BlueTec4) Hodsg R Nzwopfx Agkjfh Green environmental sticker Automatic transmission Twin-tired rear axle Rear axle differential lock Former city service vehicle Amber beacon lights Isri comfort driver’s seat Power steering Driver airbag Electric exterior mirrors Radio with CD Roof hatch (Swedish hatch) Load bed dimensions in mm L: 2150/2950 W: 2200 H: 1450 The load bed is divided into two compartments: 1x 2150L, 1x 800L, but can be converted into one loading space – then 2950L Payload: 1,990 kg Unladen weight: 4,010 kg Gross vehicle weight: 6,000 kg Wheelbase: 3,700 mm Immediately operational Errors, changes, and prior sale reserved We sell exclusively according to our terms and excluding any warranty whatsoever. Errors, changes, and prior sale reserved. We are available continuously Monday to Friday from 9:00 am to 5:00 pm, Saturday by appointment. Outside these opening hours, appointments can be arranged by phone. We are happy to accept your current used equipment/vehicle as trade-in. Priority is given to sales to commercial customers and exporters; this applies to our entire vehicle inventory. The information given above is non-binding, subject to errors, changes, and prior sale!

Stav: takmer ako nový (použitý), Rok výroby: 2013, This floor-standing machine is designed for mixing a large number of dry products. Intensive and homogeneous mixing is achieved due to the planetary movement of the mixing tool. The system consists of a stainless steel container – material 316L mirror polished, Ra < 0.8 µm – and a stainless steel housing that accommodates the container lid with integrated mixing assemblies and drives. The mixing container has a capacity of approx. 90 litres – usable volume approx. 30 to 60 litres – and is placed and fixed onto two arms. The product to be mixed is loaded, and the container is then raised hydraulically, allowing the mixing tool to be immersed in the product. The mixer is equipped with a stainless steel spiral mixing tool (45°), and the speed can be regulated via a gearbox. The mixing speed is adjustable to 48, 82, 135, and 231 rpm. The container is emptied via a central bottom outlet. Operation and control, including recipe and batch management, is performed via a control panel mounted on a separate stainless steel cabinet. The operating language is English. The system is prepared for use in ATEX-rated (explosion-proof) areas. Electrical specifications: 230/400V, 3 phase, 50 Hz, IP55 Footprint: 90 x 130 x 235 cm Hodpfex Antuox Agkefh Weight: approx. 850 kg

Stav: dobrý (použitý), METTLER TOLEDO TOUCHSGREEN SCALE BUTCHER'S SCALE used Item no.: SEE PHOTO Type: UC3-SPCT-A Rated voltage: 230 V / 50Hz Max 6/15 kg Min 40 g e = 2/5 g -10°C / +40°C METTLER TOLEDO TOUCHSGREEN SCALE BUTCHER'S SCALE SAUSAGE SCALE RETAIL SCALE DELI SCALE COUNTER SCALE DELI COUNTER SAUSAGE COUNTER Hsdsg Dgrxepfx Agkjfh We can only respond to inquiries regarding this item if you provide a telephone number. €490 net / unit plus 19% VAT. 1 unit currently in stock / available for pickup ex stock 47441 Moers We offer as pictured. Inspection is explicitly offered. More equipment in stock. If you wish to receive an offer, please note the following: We require a complete billing and delivery address as well as a telephone number to prepare a quote. An email address is also essential. We will then prepare an offer. Our bank details are listed on the offer. If you accept, please make payment and we will ship immediately upon receipt of payment. An invoice will be automatically sent to you without delay. If you have any further questions, please contact us. Best regards JS Trading GmbH General notes: We offer items from various company liquidations, which we describe to the best of our ability and provide meaningful photos. No further information on the item can be provided. You are welcome to inspect the item on Tuesdays and Fridays from 9 a.m. to 4 p.m. by prior appointment. If required, the item can be taken immediately. Unless expressly stated otherwise, this offer concerns USED EQUIPMENT. Items have been visually inspected and are technically in working order as far as possible. All prices are offered here as net prices. All offers ex stock 47441 Moers. If you wish shipping, please contact us to discuss packaging and shipping costs. All dimensions are approximate. Errors in the text and photos expressly reserved. You will find further offers from the gastronomy, warehouse technology, transport trolleys, etc., also in our shop.

Rok výroby: 2003, stav: veľmi dobrý (použitý), Ceramic Pin Press-Fitting Device for Rotor Shafts Operating Principle: Ceramic pins are fed to an inspection station via a vibratory bowl feeder and pneumatic hose, where the position of any potential unilateral bore is checked by an optical sensor. Incorrectly oriented parts are ejected into a collection container by a pneumatic slide. Properly oriented pins are subsequently delivered to the separator of the press-fitting tool via another pneumatic hose. The actual press-fitting process is also performed pneumatically, using a plunger guided by a rolling bearing. Initially, a manually adjustable pressure p1 ensures that the pin is not inserted into the shaft too easily. A second manually adjustable pressure p2 is then used to press the pin to its stop inside the rotor shaft. A disc spring package, preloaded to 5,000 N, prevents excessive force from being applied to the pin and shaft. The rotor shaft must be manually inserted, removed, and clamped into the tool by an operator. This procedure is safeguarded by a light curtain. Construction: Self-supporting press-fitting station for ceramic pins and balls, integrated into a complete system. Rotor Shafts: Diameter: 5 – 20 mm Length: 50 – 200 mm Ceramic Pin: Hfjdpeib H U Dofx Agksh Diameter: 3 mm Length: 5 ± 0.2 mm Cycle Rate: Output: 15 strokes per minute Safety: Safety door with interlock switch Category 4 light curtain Emergency stop Airborne Noise Emission: Continuous sound pressure level at the workstation: 70 dB(A) Electrical Connection: Voltage: 230 V AC Frequency: 50 Hz Fuse: 10 A Compressed Air Connection: Operating pressure: 5 – 7 bar Dimensions: L x W x H = 850 x 950 x 1020 mm Weight: approx. 110 kg Year of Manufacture: 2003 Electrically height-adjustable worktable Documentation and circuit diagrams available

Stav: generálne opravený (použitý), Rok výroby: 2005, pojazdová vzdialenosť osi X: 4 000 mm, zdvih osi Y: 3 000 mm, zdvih osi Z: 1 200 mm, 5-axis machining center in gantry design. CYPORT CP 4030 (universal gantry machine with 4x3 meter machining area). Retrofit machine from 2005 (completely overhauled) Working "hand in hand" with you towards retrofit. HIGHLIGHTS • 5-axis simultaneous machining thanks to 2-axis fork milling head with direct drives • Powerful milling spindle with 12,000 rpm • Highly rigid twin gantry for optimum machining results • Large working area with minimal footprint • All-round access to the working area • Tool magazine with 48 positions Travel X/Y/Z: 4,000 / 3,000 / 1,200 mm Gantry clearance Y/Z: 3,280 / 1,400 mm Rapid traverse X/Y/Z: 30/30/30 m/min Feed force per axis: 10,000 N 2-axis NC milling head M 21 (CYTEC): Swivel range A-axis: +/-110° Swivel range C-axis: +/-360° Powerful CYTEC milling spindle: Tool holder: HSK-A 100 Speed: 18,000 rpm Power: 42/53 kW (100%/40% duty cycle) Torque: 201/253 Nm (100%/40% duty cycle) Tool magazine: Number of places: 48 HSK-A100 Max. tool diameter: 105/130 mm Max. tool length: 300 mm Max. tool weight: 8 kg CNC: HEIDENHAIN iTNC 530 5-axis path control Wireless electronic handwheel HR 410 Coolant system: Tank volume: 800 L External coolant supply: 20 bar Internal coolant supply: 40 bar Paper band filter Coolant/air blast switching, external Workpiece measuring system: Hfjdpfx Ageivn Eujksh Probe M&H - wireless technology Documentation CE certification Retrofit scope: NEW COMPONENTS New ball screws All bearings replaced New linear guide carriages New tool changer New counterbalance cylinders New lubrication distributors All cables and lines replaced All hoses replaced New bellows New PVC lamellae New safety bumpers Electrics (switches, relays, contactors, etc.) replaced New safety glass New paintwork RECONDITIONED COMPONENTS C-axis A-axis Motor spindle Drive motors Hydraulic unit Hydraulic valves Complete pneumatics * All wear parts within assemblies are replaced by new components. Afterwards, component condition meets the quality standards of the Exchange Program. REFURBISHED COMPONENTS Machine table Slider / Z-ram X and U carriages Y-carriage Y-beam Energy chains and cable carriers Coolant system Central lubrication Sheet metal covering All structural components have been checked, sandblasted, ground/scraped, measured and then repainted. The accuracy of these parts is equivalent to new machines. Machine can be inspected anytime. For over 30 years, EDEL Werkzeugmaschinen GmbH has been manufacturing high-precision machine tools for the complete machining of highly complex workpieces with uncompromising attention to detail. Our machine capabilities range from cutting high-strength materials, to aluminum or plastics. The product portfolio includes 5-axis and 6-axis universal machining centers, 7-axis portal milling machines, and gantry machines for workpieces up to 7 meters long. MADE IN GERMANY

Stav: použitý, Rok výroby: 2011, Funkcionalita: plne funkčný, číslo stroja/vozidla: L3B031, IMA MISTRAL Y 16 bottle/can blowing-out machine – Used, immediately available Machine data: Model: IMA MISTRAL Y 16 Type: Automatic bottle/can blowing-out and extraction machine Serial number: L3B031 Year of manufacture: 2011/2012 Manufacturer: IMA S.p.A. / IMA Swiftpack (Italy) Hsdpsw Sfa Esfx Agkjfh Electrical equipment: 220/380 V, 3 phases, 50 Hz Space requirements: approx. 400 × 140 × 220 cm Description & key features: The rotary blowing-out machine is designed for pharmaceutical and medical applications and is suitable for GMP-compliant internal cleaning of stable, round glass or plastic bottles using sterile compressed air. - Fully automatic bottle cleaning and extraction - Processing of up to 200 containers/minute - Including format sets for plastic bottles Ø 44 mm × height 95 mm - Additional format sets included: Ø 40 × 55 mm, Ø 60 × 130 mm Operating principle: Bottles are fed in single file via a conveyor belt and screw, separated, transferred into a carousel, gripped with tongs, rotated 180°, and cleaned with nozzles (blowing out) and suction heads (extraction). The bottles are then transferred to the conveyor and the downstream machine. - Suitable for bottles and cans made of plastic and glass - High degree of automation, GMP-compliant design Documentation & papers: - Operating manuals (German, English, Italian) - Electrical diagrams - Layout drawings / Guards layout - Spare parts catalogue - Blowing diagram / Electric diagram - FAT and SAT documents - Machine and operating manual in German Scope of supply: - Complete machine - Spare parts as per catalogue - All original documentation (PDFs and printed documents) - Format parts for various bottle sizes Condition: - Used, from pharmaceutical production - Ready for immediate use after installation - Immediately available Location: Çorlu, Turkey Price: On request

Stav: nový, Rok výroby: 2019, Funkcionalita: plne funkčný, číslo stroja/vozidla: 8100332, opakovacia presnosť: 0,076 mm, pojazdová vzdialenosť osi X: 300 mm, zdvih osi Y: 300 mm, zdvih osi Z: 25 mm, hmotnosť obrobku (max.): 245 kg, typ vstupného prúdu: Klimatizácia, vstupné napätie: 230 V, tlak: 2 000 lišta, Do you need a precise and versatile cutting machine that won’t take up your entire workshop floor? Then the OMAX ProtoMAX is the solution. It combines industrial-grade quality with a compact design—perfect for workshops, schools, product development, prototyping, and small-batch production. With water and abrasive, you can cut almost any material—from aluminum, stainless steel, and titanium to carbon fiber, plastics, glass, and stone. All with high precision, and without thermal effects or deformation. 🔹 Cutting area: 304 x 304 mm 🔹 Max material thickness: up to 25 mm 🔹 Working pressure: 2,068 bar 🔹 Power supply: 230 V, single-phase (standard outlet!) 🔹 Ready to run – plug & play Hsdpfxjwl Ipko Agkefh The ProtoMAX comes complete with IntelliMAX software, which lets you design, import, and cut directly from the same interface. Easy to use, yet powerful enough for advanced jobs. Want to show that your workshop means business—even in a small space? Then the OMAX ProtoMAX is the obvious choice.

Stav: veľmi dobrý (použitý), Rok výroby: 2015, Funkcionalita: plne funkčný, dierovacia sila: 330 t, Machine for Die-Cutting, Embossing, Waste Stripping, and Blank Separation - as is - System equipped with a high-performance sheet feeder for fully automatic NON-STOP operation ⦁ for fully automatic die-cutting, creasing, and embossing with or without gripper edge ⦁ for stripping internal waste as well as side and rear sheet margins ⦁ for stack-type delivery of die-cut and stripped sheets with Hedpfx Ageww E Nrjkefh the gripper edges still attached, or ⦁ for separating the gripper edges and then stack-type delivery of the remaining sheets ⦁ with a patented gripper carriage registration system for maximum register accuracy ⦁ with a pile stacker enabling fully automatic separating sheet feed and NON-STOP delivery, which does not require retooling even for the smallest cut sizes (changeover table with comb structure) ⦁ separator sheet magazine with electronic stock control, refillable during production ⦁ with Centerline equipment ⦁ with automatic pallet changer in the delivery section Specification Max. sheet size: 760 x 1060 mm Min. sheet size: 350 x 400 mm Max. die-cutting force: 3.3 MN (330 t) Speed: 9,000 sheets/h Processable materials: Paper min. 80 gsm Cardboard up to 2000 gsm Corrugated board up to 3 mm (max. sheet warp 4%) Features: Optical sheet alignment (Dyset) automatic non-stop feeder stripping section blank separation section Centerline fully automatic pallet changing device at delivery including platform quick-lock frames in all tooling stations