Faymonville Multimax Satteltieflader (1+3) - Hydr. Gelenkt kúpiť použité (107 605)

Stav: nový, maximálna hmotnosť nákladu: 50 400 kg, celková hmotnosť: 65 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete inventory of vehicles, including immediately and short-term available units, on our website. Excerpt from the specification. Full equipment details on request. GOOSENECK: * Gooseneck in SNT design to optimize loading deck length, approx. 3,700 mm long, rear with bevel approx. 1,000 mm x 10° * For tractor units: 4x2, 6x2 and 6x4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for controlling hydraulic operations (excluding hydraulic winches) * On the gooseneck: 1 pair of removable ALU sideboards, approx. 400 mm high, anodized finish * On the gooseneck: 1 removable ALU tailboard, approx. 400 mm high, anodized finish * Above the gooseneck: approx. 40 mm hardwood covering, chequer plate in the king pin area * 2-inch king pin LOADING AREA: * Loading platform in extendable version, approx. 8,800 mm long, with rear bevel, approx. 500 mm x 10° * Recess in the loading area and extending into the bevel for excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system per ECE R 141. Data transfer to the towing vehicle is via a standardized EBS interface according to ISO 11992. For correct display, the towing vehicle must be capable of transmitting and displaying this data * TPMS tire pressure sensors mounted in all wheels * BPW axles and suspension, 1st axle steerable ahead, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lift/lower valve * Axle tools * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load approx. 50,000 kg * 245/70 R 17.5 3PMSF twin tires. Manufacturer of our choice, load index 143/141J (146/146F) * Loading deck with continuous and between-axles interrupted hardwood covering, approx. 50 mm thick (increasing coefficient of friction) * Platform locking with conically welded locking profiles every approx. 250 mm, including pre-tensioning plate * 1 intermediate table, approx. 300 mm wide, for the large cross-section extension tube * Intermediate table with recessed loading area and extendable drop-in rails for Alu bridging elements * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 8 pairs of recessed lashing rings in the outer frame, fold-out (LC 10,000 daN) * Extendable (galvanized) platform wideners, approx. 230 mm per side (without wooden planks) * Wheel recesses with square climbing strips, approx. 15 x 15 mm, positioned in front of axles, open to the gooseneck cross member, approx. 700 x 410 mm (W x D) * ALU covers for the wheel recesses, usable as bridging elements for extension OR as widening planks (if the vehicle is equipped with extendable wideners) * Wheel recesses with square climbing strips, approx. 15 x 15 mm, between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * 1 pair mechanical rear supports * Steering possible from front and rear via cable remote, with single-track control of the axles Kledpfx Aoyhkrfoc Ner HYDRAULIC LOADING RAMPS: * DR-15/60-900-4350-KG-HV-M: One pair of two-piece steel ramps, each approx. 4,350 mm long and approx. 900 mm wide

Stav: nový, maximálna hmotnosť nákladu: 50 400 kg, celková hmotnosť: 65 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Our complete stock of vehicles, including those available for immediate or short-term delivery, can be found on our website. Excerpt from the equipment. Full equipment details available upon request. GOOSENECK * Gooseneck in SNT design to optimize loading deck length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 10° * Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 * Plug-in steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection strip with sockets * 3 kW electro-hydraulic power pack for hydraulic functions, except for hydraulic winches * 1 pair of plug-in aluminum side walls, approx. 400 mm high, anodized finish * One plug-in aluminum rear wall, approx. 400 mm high, anodized finish * Approximately 40 mm thick hardwood floor covering over gooseneck, checker plate covering over king pin * 2-inch king pin * Rear part of gooseneck with mount for aluminum loading ramps * Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917) LOADING PLATFORM * Extendable loading platform, approx. 8,800 mm long, with rear chamfer approx. 500 mm x 10° * Recess in the platform and into the chamfer for receiving excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, first axle with forced steering, all other axles with hydro-mechanical forced steering * First axle with electromagnetically activated reverse lock, activated via reverse gear and manual control * Technical axle load: 12,000 kg each, air suspension with lift/lower valve * Twin tires 235/75 R 17.5 3PMSF * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B – static test load approx. 50,000 kg * Continuous hardwood floor covering approx. 50 mm thick on loading platform and interrupted between axles (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable (galvanized) side extensions approx. 230 mm per side (without wooden planks) * Wheel recesses with square climbing strips, approx. 15 x 15 mm in front of axles, open to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * Aluminum covers for wheel recesses, also usable as bridging elements for the extendable platform OR as extension planks * Aluminum elements lockable onto the extendable pipes of the extensions * Extendible U-profiles for inserting the aluminum covers: – on the fixed part behind the gooseneck – at the intermediate table – on the extendable platform * Wheel recesses with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * Aluminum covers for wheel recesses, also usable as bridging elements for the extendable platform OR as extension planks * Aluminum elements lockable onto the extendable pipes of the extensions * 1 pair of mechanical rear supports * Remote steering from the front and rear via cable remote control, with single-track monitoring of axles, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-piece steel ramps, type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm long and approx. 900 mm wide * Hydraulically foldable ramp tips * Ramps can be hydraulically shifted individually approx. 235 mm outward and approx. 215 mm inward * Super Grip rubber flooring approx. 25 mm and steel flooring approx. 5 mm as additional Kodstx Nwnepfx Ac Njlr

Stav: nový, celková hmotnosť: 80 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Ďalšie vozidlá na požiadanie. Výber z výbavy. Celková špecifikácia na vyžiadanie. LABUŤOVÝ KRK: * Labuťový krk v SNT dizajne na optimalizáciu dĺžky ložnej plochy, dĺžka cca 3700 mm, vzadu so skosením cca 1000 mm x 10° * Vhodné pre ťahače: 4 x 2, 6 x 2 a 6 x 4 * Predný čelný panel z ocele, zasúvateľný, cca 400 mm vysoký * ASPÖCK-UNIBOX na prednej prípoji s 24N, 24S a 15-pol zásuvkami * 3 kW elektrohydraulická jednotka pre riadenie hydrauliky, okrem hydraulických lanových navijakov * Vonkajšie nosníky labuťového krku s montážnymi otvormi pre skrutkovacie kotviace oká. Prvý otvor cca 200 mm odpredu, potom každých cca 400 mm. 2 páry skrutkovacích kotviacich ôk vrátane (LC 5 000 daN) * 1 pár ležiacich kotviacich ok v zadnej časti labuťového krku (LC 10 000 daN) * Na labuťovom krku 1 pár zasúvateľných ALU bočných stien, cca 400 mm vysokých, eloxované prevedenie * Na labuťovom krku jedna zasúvateľná ALU zadná stena, cca 400 mm vysoká, eloxované prevedenie * Na labuťovom krku cca 40 mm silná povrchová vrstva z tvrdého dreva, nad kráľovským čapom podlahový profilovaný plech * 3,5-palcový kráľovský čap * Vodiaca doska labuťového krku pre sedlovú dosku, cca 500 mm široká * Okrúhla NATO zásuvka na prednej prípoji (Maeler & Kaege VG 96 917) * 2 páry kotviacich ok s pružinou, zavesené na vonkajších nosníkoch labuťového krku (LC 5 000 daN) LOŽNÁ PLOCHA: * Ložná plocha v vysúvateľnom prevedení, dĺžka cca 8800 mm so skosením vzadu cca 500 mm x 10° Kledpoxarmasfx Ac Ner * Pneumatické uzamykanie s kónickým uzamykacím čapom a zosilnené pozície uzamykania, napájacie vedenia sú chránené v teleskopických nosníkoch a automaticky sa prispôsobujú zvolenej dĺžke ložnej plochy * BPW nápravy a zavesenie, 1. náprava riadená dopredu, všetky ostatné nápravy mechanicko-hydraulicky nútene riadené * 1. náprava s elektromagnetickým blokovaním spiatočky cez cúvací systém a manuálne aktivovanie * Technické zaťaženie na nápravu: 12 000 kg * Vzduchové odpruženie so zdvihovým a spúšťacím ventilom * 235/75 R 17.5 3PMSF dvojmontáž – výrobca podľa nášho výberu * Mechanické oporné nohy so 2-stupňovou prevodovkou a kľukou. JOST modul B – statická skúšobná nosnosť = 50 000 kg * Na ložnej ploche súvislá a medzi nápravami prerušená cca 50 mm silná vrstva z tvrdého dreva (tým sa zvyšuje koeficient trenia). – Štrbinové otvory pre zavesiteľné a premiestniteľné premostiace prvky * Vpredu na ložnej ploche – 1 posuvný medzistôl, cca 300 mm široký, pre výsuvnú rúru s veľkým prierezom, s profilovaným plechom. – vpredu a vzadu so štrbinovými otvormi pre zavesiteľné a premiestniteľné premostiace prvky * 1 pár kotviacich ok na prednej priečnej priečke (LC 10 000 daN) * 7 párov zapustených kotviacich ok vo vonkajšom ráme ložnej plochy, vyklápateľné von (LC 10 000 daN) * Rozšírenie (pozinkované) výsuvné o cca 230 mm na každú stranu (bez drevených trámov) * 1 pár mechanických zadných podpier * Riadenie zpredu a zozadu pomocou diaľkového ovládania, s kontrolou vyrovnania náprav, bez inštalácie v ťahači * TPMS snímače tlaku v pneumatikách namontované na všetkých kolesách * Uzamykanie ložnej plochy kónicky navařenými aretačnými profilmi každých 500 mm * Kontrola uzamknutia vľavo a vpravo na návesu * Pre medzistôl, cca 300 mm široký, mechanický zámok na upevnenie medzistola vo vysunutom stave * 5 párov závitových blokov na výsuvnom nosníku na montáž skrutkových ok M20 (LC 5 000 daN) BRZDOVÝ SYSTÉM

Stav: nový, maximálna hmotnosť nákladu: 67 200 kg, celková hmotnosť: 85 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete vehicle inventory, including immediately and soon-available vehicles, on our website. Excerpt from equipment. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. 3,700 mm long, rear tapered approx. 1,000 mm x 10° * For tractors: 6x2, 6x4, and 8x4 short wheelbase * Steel front wall, removable, approx. 400 mm high * 3 kW electro-hydraulic power pack for controlling hydraulic operations, except for hydraulic winches * Outer beams of gooseneck with mounting holes for bolted lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of removable ALU side walls, approx. 400 mm high, anodized * 1 removable ALU rear wall, approx. 400 mm high, anodized * Over the gooseneck, approx. 40 mm thick hardwood floor; over the king pin, checker plate floor * 3.5-inch king pin * Guide plate from gooseneck for fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. cabling bracket for supply lines (Faymonville couplings) * 2 pairs of stake pockets recessed into the gooseneck for approx. 100 x 50 mm plug-in stakes PLATFORM * Extendable platform, approx. 11,000 mm long, rear tapered approx. 500 mm x 10° * Pneumatic locking with conical lock bolts and reinforced lock positions; supply lines protected within the extendable rails and automatically adjust to the platform length * BPW axles and suspension, 1st axle steered ahead, 2nd axle fixed, all other axles hydraulic-mechanical forced steering * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each Kljdpfxsrgzv No Ac Ner * Air suspension with raise/lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear with two-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Platform with continuous and between the axles interrupted approx. 50 mm thick hardwood flooring (increases friction coefficient) * Long holes for attachable and repositionable bridging elements: – at the fixed section behind the gooseneck – at the front of the platform * 1 sliding intermediate platform, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate floor, front and rear with long holes for attachable and movable bridging elements * 1 pair of recessed flat lashing rings in the fixed front platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the platform, folding outward (LC 10,000 daN) * 1 pair of mechanical rear supports * Steering from front and rear operated via cable remote control, with single-track alignment of the axles, without installation in the tractor * 1st axle with automatic lift-axle function and starting aid in accordance with EU regulation 2021/535 * Under the gooseneck and at the rear cross-member, left and right, each with a 7-pin socket and holder for warning plates * Painted sand coating on the outer frame of the platform as well as on the checker plates and the transition area between the platf

Stav: nový, maximálna hmotnosť nákladu: 36 410 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Celý náš vozový park so vozidlami dostupnými ihneď a v krátkom čase nájdete na našej webovej stránke. Výber zo špecifikácie. Kompletná výbava na vyžiadanie. HUSÍ KRK: * Husí krk v SNT dizajne pre optimalizáciu dĺžky ložnej plochy, dĺžka cca 3 700 mm, vzadu so skosením cca 1 000 mm x 10° * Pre ťahače: 4 x 2, 6 x 2 a 6 x 4 * Čelná stena z ocele, zasúvateľná, výška cca 400 mm * ASPÖCK-UNIBOX * 3 kW elektrohydraulická jednotka na ovládanie hydraulických operácií, s výnimkou hydraulických lanových navijakov * Nad husím krkom cca 40 mm silná tvrdodrevo podlaha * 2-palcový kráľovský čap * Vodiaca doska husieho krku pre sedlový tanier, šírka cca 500 mm * Uchytenie v zadnej časti husieho krku pre ALU najazdové rampy * Okrúhla NATO zásuvka na čelnej prípojnej lište (Maeler & Kaege VG 96 917) * 4 kliny s držiakom pred čelnou stenou * 1 pár zásuvov na kolíky zapustených do husieho krku, pre zasúvacie kolíky cca 100 x 50 mm (vnútri na ráme podvozka) VÝBAVA: * Ložná plocha dĺžka cca 8 800 mm, vo výsuvnom prevedení cca 4 100 mm, so skosením vzadu cca 500 mm x 10° * Jedno vyhĺbenie v ložnej ploche a zasahujúce do skosenia na uloženie ramena lyžice bagra, cca 2 490 x 750 x 210/290 mm (D x Š x V) * Pneumatické uzamykanie s kužeľovým západkovým čapom a zosilnenými uzamykacími pozíciami, prívodné vedenia sú chránené vo výsuvných nosníkoch, automaticky sa prispôsobujú dĺžke ložnej plochy * TPMS systém kontroly tlaku v pneumatikách podľa ECE R 141 * BPW nápravy a zavesenie, 1. a 2. náprava pevná, 3. náprava riadená s výkyvnou koncovkou * 3. náprava s elektromagnetickou spätnou zarážkou cez spiatočku a manuálne aktivovanie * Technické zaťaženie nápravy: po 12 000 kg, vzduchové pruženie so zdvíhacím a znižovacím ventilom * 235/75 R 17.5 3PMSF dvojmontáž. Značka podľa nášho výberu * Mechanické oporné nohy sedlovej časti s dvojstupňovou prevodovkou a kľukou. JOST Modul B, statická skúšobná nosnosť = cca 50 000 kg * Na ložnej ploche súvislá a medzi nápravami prerušená cca 50 mm hrubá tvrdodrevo podlaha (zvýšený koeficient trenia) * 1 priečny stôl cca 300 mm široký pre výsuvnú rúrku s veľkým prierezom. Priečny stôl so zníženou ložnou plochou a výsuvnými závesnými lištami pre ALU premostenie * Uzamykanie ložnej plochy s kužeľovo privarenými profilmi každých cca 250 mm. Vrátane predsadenej platne * 1 pár upínacích krúžkov na prednej priečnej výstuhe (LC 10 000 daN) * 9 párov zapustených upínacích krúžkov v vonkajšom ráme ložnej plochy, vyklopiteľných von (LC 10 000 daN) * 1 pár pevne zabudovaných kolísk na kolesá pred nápravami, otvorených k priečnej výstuhe husieho krku, cca 700 x 410 mm (Š x H) * Kolískové jamy s hranatou protišmykovou lištou cca 15 x 15 mm plus rozšírenia v spodnej časti (ak je vozidlo vybavené výsuvnými rozšíreniami) * 1 pár pevne zabudovaných kolísk na kolesá cca 1 480 x 700 x 410 mm (D x Š x H), na ložnej ploche medzi 1. a 2. nápravou * Kolískové jamy s hranatou protišmykovou lištou cca 15 x 15 mm plus rozšírenia v spodnej časti * Hliníkové kryty kolísk na kolesá pred nápravami a medzi 1. a 2. nápravou, ktoré môžu byť tiež použité ako rozširujúce dosky (ak je vozidlo vybavené výsuvnými rozšíreniami) * Hliníkové prvky uzamykateľné na výsuvných rúrkach rozšírení Kljdpsy Auh Iefx Ac Ner * 1 pár mechanických zadných podpier * 1. náprava s pomocou pri rozjazde * Nalakované pieskové lôžko

Stav: nový, maximálna hmotnosť nákladu: 51 780 kg, celková hmotnosť: 65 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our entire vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment. Complete specifications available upon request. GOOSENECK: * Gooseneck in SNT design to optimize the loading platform length, length approx. 3,700 mm, sloped at the rear approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high Kedpfjyhkrlex Ac Njlr * ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams on the gooseneck with mounting holes for bolted lashing rings * One mounting hole in the rear upper area of the gooseneck outer beams for a bolted lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * On the gooseneck, 1 pair of plug-in side aluminum drop sides, approx. 400 mm high, anodized finish * On the gooseneck, 1 plug-in rear aluminum drop side, approx. 400 mm high, anodized finish * On the gooseneck, approx. 40 mm thick hardwood flooring * 2-inch kingpin * 1 crosswise stake pocket strip in the gooseneck floor before the slope, for plug-in stakes approx. 100 x 50 mm LOADING PLATFORM: * Retractable loading platform, length approx. 8,800 mm, with rear slope approx. 500 mm x 10° * One depression in the platform and extending into the slope for accommodating excavator dipper stick approx. 2,490 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system complying with ECE R 141 * BPW axles and suspension, 1st and 2nd axles fixed, 3rd and 4th axles trailing steerable * 3rd and 4th axles with electro-magnetic reversing lock, actuated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Mechanical landing legs with 2-speed gearbox and crank * Continuous hardwood flooring on the platform, 50 mm thick, interrupted between the axles (increased coefficient of friction) * 1 intermediate table with offset platform, approx. 300 mm wide, for extension tube with large cross-section, sheet metal covering * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 6 pairs recessed lashing rings in the outer frame of the loading platform, foldable outwards (LC 10,000 daN) * Additionally, 1 pair of lashing rings on the front cross member of the platform, rotated approx. 90° inwards towards the platform (LC 10,000 daN) * Retractable extensions (galvanized) approx. 230 mm per side (without wooden planks) * 1 pair of fixed integrated wheel wells, open up to the extension, approx. 700 x 410 mm (W x D), in the platform ahead of the 1st axle * Between the 2nd and 3rd axles in the platform, 1 pair of fixed integrated wheel wells, approx. 1,695 x 700 x 410 mm (L x W x D) * 1 pair of mechanical rear supports * 245/70 R 17.5 3PMSF dual tires – manufacturer at our discretion HYDRAULIC LOADING RAMPS: * DR-15/60-900-4350-HB-HV-M * One pair of two-piece steel ramps, length approx. 4,350 mm and width approx. 900 mm * Hardwood covering; hydraulically folding ramp tips * Ramps can be hydraulically moved individually approx. 235 mm outwards and approx. 215 mm inwards * Hardwood covering on the slope of the platform * Ramp with hardwood covering BRAKING SYSTEM: * WABCO EBS-E braking system in compliance with EU regulations SURFACE TREATMENT: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum)

Stav: použitý, maximálna hmotnosť nákladu: 51 870 kg, celková hmotnosť: 65 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 03/2025, ďalšia kontrola (TÜV): 03/2026, celková šírka: 2 540 mm, Výbava: ABS, You can find our entire range of vehicles, including models available immediately or on short notice, on our website. Excerpt from the equipment. Complete specification available on request. GOOSENECK • Gooseneck in SNT design for optimized load deck length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 10° • For tractor units: 4 x 2, 6 x 2 and 6 x 4 • Plug-in steel front wall, approx. 400 mm high • Yellow-red air couplings on the front connector rail • ASPÖCK-UNIBOX at the front connector rail with 24N, 24S & 15-pin sockets • 3 kW electro-hydraulic unit for controlling the hydraulic functions • External beams of gooseneck with mounting holes for bolted lashing rings • One mounting hole at the upper rear section of the gooseneck’s external beams for a bolted lashing ring • 1 pair of screw-in lashing rings included (LC 10,000 daN) • 1 pair of plug-in aluminium side walls, approx. 400 mm high, anodized, on the gooseneck • 1 plug-in aluminium rear wall, approx. 400 mm high, anodized, on the gooseneck • Approx. 40 mm hardwood decking on the gooseneck • 2-inch king pin • Gooseneck guide plate for the fifth wheel, approx. 500 mm wide • Mount at the rear section of the gooseneck for aluminium loading ramps • Round NATO socket at the front connector rail (Maeler & Kaege VG 96 917) LOADING DECK • Extendable loading deck, length approx. 8,800 mm, rear chamfer approx. 500 mm x 10° • Recess in the loading deck as well as in the chamfered area for accommodating an excavator dipper stick approx. 2,490 x 750 x 210/290 mm (L x W x H) • TPMS tyre pressure monitoring system according to ECE R 141 • BPW axles and suspension • 1st and 2nd axle rigid, 3rd and 4th axle self-steering • 3rd and 4th axle with electromagnetic reversing lock, can be activated via reverse gear and manually • Technical axle load rating: 12,000 kg each • Air suspension with lifting and lowering valve • 235/75 R 17.5 twin tyres, 3PMSF • Mechanical landing gear with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg • Continuous hardwood decking (approx. 50 mm) on the loading deck and interrupted between axles (increases coefficient of friction) • Loading deck locked with tapered welded locking profiles every approx. 250 mm • Long holes for attachable and repositionable bridging elements at the front of the loading deck • Intermediate platform with stepped loading deck, approx. 300 mm wide, for extraction tube with large cross-section, with steel covering – front and rear with long holes for attachable and repositionable bridging elements – removable cover flush with the loading deck • 1 pair of lashing rings on the front crossmember (LC 10,000 daN) Kledpfx Aoxtc Uhec Njr • 6 pairs of recessed lashing rings in the outer frame of the loading deck, foldable outward (LC 10,000 daN) • Additionally, 1 pair of lashing rings externally on the front crossmember of the loading deck, approx. 90° rotated inward towards the loading deck (LC 10,000 daN) • Extendable bolted steel extensions (galvanized), approx. 230 mm per side • 1 pair of fixed open wheel recesses up to extension, approx. 700 x 410 mm (W x D), in the loading deck ahead of the 1st axle; wheel recesses with steel covering and square climbing bars approx. 15 x 15 mm, every approx. 200 mm • Between 2nd and 3rd axles in the loading deck, 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D); covers for wheel recesses split longitudinally, with wooden top, outer with plug-in locking...

Stav: nový, maximálna hmotnosť nákladu: 38 953 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, MAX100-N-3B-9.30-U Technické údaje Rýchlosť: 80 km/h Celková hmotnosť: 49 500 kg Sedadlová zaťaž: 18 000 kg Zaťaženie náprav: 31 500 kg Prevádzková hmotnosť (+/- 3%): 10 547 kg Užitočné zaťaženie približne: 38 953 kg Dĺžka labutieho krku: 3 850 mm Výška sedla naložená: 1 200 mm Dĺžka ložnej plochy: 9 300 mm Výsuvné o: 0 mm Rázvor náprav: 1 360 mm Polomer prehnutia dozadu: 2 300 mm Výška ložnej plochy pri max. zaťažení: 860 mm Celková šírka: 2 540 mm Rozsah odpruženia: -55/+145 mm Technický popis Kjdpfx Acog Sk Tro Nelr Labučí krk: Labučí krk so zkosenými rohmi vpredu pod uhlom 45° a zadným zkosením cca 750 mm x 10°. 3 páry uchytných krúžkov (LC 5 000 daN). Tvrdé drevené obloženie, hrúbka 30 mm. Ložná plocha: Za labučím krkom hydraulicky zdvíhateľná a spustiteľná plocha, dĺžka cca 2 800 mm, so zadným zkosením cca 1 000 mm x 8°. 6 párov smerom von skladateľných upevňovacích krúžkov (LC 5 000 daN). 2 páry smerom von skladateľných upevňovacích krúžkov (LC 10 000 daN). 1 pár zvnútra skladateľných upevňovacích krúžkov v prednej časti centrálneho nosníka (LC 10 000 daN). Výrezy vo vonkajšom ráme ložnej plochy na zavesenie napínacích pásov (LC 2 000 daN). Tvrdé drevené obloženie približne 48 mm silné, cez nápravy ryhovaná plechová podlaha. Rampa: Dvojdielne oceľové rampy. Jedna sada pozinkovaných dvojdielnych oceľových rámp cca 2 750 + 1 400 x 800 mm s cca 48 mm silným tvrdodreveným obložením. Rampy s hydraulicky sklopnými časťami rampy, hydraulickým zdvíhacím zariadením a hydraulickým posuvom. Maximálne zaťaženie na pár: 40 000 kg Oporné nohy: JOST oporné nohy (mechanické) s 2-stupňovou prevodovkou na zdvih 24 t (testovaná nosnosť 50 t). Pneumatiky: Pneumatiky 235/75 R 17.5 podľa výberu výrobcu. Náprava: SAF nápravy, vzduchovo odpružené, s bubnovými brzdami, so zdvíhateľnou/spúšťateľnou funkciou. Posledná náprava je riadená s elektromagnetickou blokáciou spätného chodu, aktivovaná spätným chodom alebo manuálne. Náradie k náprave. Brzdový systém: Brzdový systém v súlade s predpismi EÚ, s EBS-E (2S2M) bez prepojovacích línií k ťažnému vozidlu. Oceľová konštrukcia: Oceľová konštrukcia z vysokopevnostných jemnozrnných ocelí. Kvalita ocele: S355J2+N/S355MC (medza klzu 355 MPa) S690QL/S700MC (medza klzu 690 MPa) Lak: Prvotriedna a trvácna antikorózna ochrana štandardne tryskaného rámu zvareného rámu zaručená 2K zinkovou základnou farbou. Kvalitný 2K vrchný lak v jednoliatej farbe podľa RAL vzorkovníka podľa výberu. Zadná časť kovovo pokovovaná a lakovaná v RAL 9010 (čistobiela). Metalický lak nie je možný. Elektroinštalácia: Elektroinštalácia podľa predpisov EÚ, LED osvetlenie 24 V ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX na pripojovacej lište vpredu so zástrčkami 24N, 24S & 15 pól. Pripojenie podľa ISO: 24N ISO-1185 24S ISO-3731 15 pólové ISO-12098 Príslušenstvo v cene: 2" kráľovský čap Pozinkovaná oceľová čelná stena cca 400 mm vysoká. Na pozinkovanej pripojovacej lište vpredu žlto-červené vzduchové spojky. 4 kusy klátikov s držiakom na čelnej stene (± 5 kg) Kábel na napájanie elektrohydraulického agregátu a/alebo elektrického lanového navijaka (35 mm², 3,5 m dĺžka, max. 250A) medzi návesom a ťažným vozidlom so zástrčkovým spojením (ANDERSON-ANDERSON) Pozinkované skladacie oporné nohy pod skosením ložnej plochy. Držiak na výstražné majáky vzadu na návesu. Ovládacie ventily pre rampy umiestnené na pravej strane návesu (± 4 kg) Žltý reflexný pás podľa predpisov EÚ po stranách a vzadu na návesu. Elektrohydraulický agregát vzadu pod ložnou plochou (± 45 kg) Na labuťom

Stav: použitý, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2017, * Nápravy SAF * Kolískové vaničky * Hydraulické nakladacie rampy nastaviteľné na šírku * Vzduchové odpruženie Klodpswta Aljfx Ac Njr * Rozšíriteľný * Pohotovostná hmotnosť: 11 020 kg -----Interné číslo vozidla: 11010----Zmena a predaj počas inzerovania vyhradený. Podpora cez WhatsApp k dispozícii! V prípade otázok k vozidlu alebo ďalších informácií nás neváhajte kontaktovať cez WhatsApp. WhatsApp Nemecky, Anglicky -- WhatsApp Nemecky, Anglicky, Arabsky

Stav: použitý, Rok výroby: 2014, Kontaktujte Theo Lelie pro více informací. Kjdpfsxtqkwox Ac Nolr

Stav: nový, maximálna hmotnosť nákladu: 36 500 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our entire inventory of immediately and shortly available vehicles on our website. Excerpt from the equipment list. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design to optimize loading platform length, length approx. 3,700 mm, rear with a bevel of approx. 1,000 mm x 6° * For tractor units: 4 x 2 and 6 x 2 * ASPÖCK UNIBOX * Grating surface with 5 mm steel reinforcement on the gooseneck and rear bevel * 2" king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connector strip (Maeler & Kaege VG 96 917) * On the gooseneck, one pair of detachable ALU side boards, approx. 400 mm high, anodised finish * 1 LED work light each, left and right, mounted on top of the front wall, wired to the connector strip for the tractor unit LOADING PLATFORM: * Loading platform, length approx. 9,600 mm, with a rear bevel approx. 900 mm x 6° * Platform behind the gooseneck hydraulically liftable and lowerable, length approx. 3,000 mm, loadable up to approx. 9,000 kg * Continuous grating surface on the lift bed and loading platform with approx. 5 mm steel underlay for extra reinforcement, designed for point loads TYRES: 235/75 R 17.5 3PMSF, twin tires. Brand of our choice * TPMS tire pressure monitoring system in accordance with ECE R 141 AXLES: * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steerable trailing axle * 3rd axle with electro-magnetic reverse lock, activated via reverse gear or manually * 1st axle with starting aid * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve HYDRAULIC LOADING RAMPS: * 1 pair of two-part AXS steel ramps with grating surface, length approx. 4,920 mm and width approx. 900 mm * Hydraulically folding ramp tips * Ramps can be hydraulically shifted individually approx. 235 mm outward and approx. 365 mm inward * Flashing beacons on the outer edges of the ramp tips, with switch next to the ramp control * Ramp locking for road position via quick coupling Kjdpfx Acey Auhho Njlr * Factory-applied sand coating on the external ramp frame and ramp tips * Mechanical sideways support legs with drop tube design on the ramps for docking to unloading ramps * Hydraulic ramp control valves located on the right side of the vehicle BRAKE SYSTEM: WABCO EBS-E brake system in accordance with EU regulations SURFACE TREATMENT: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection PAINTING: * Trailer carmine red (RAL 3002) * Rims silver-grey * Side boards natural aluminium * Wheel hubs per axle manufacturer specification * Light panel pure white (RAL 9010) EQUIPMENT: * Front wall made of steel, removable, approx. 1,600 mm high, incl. connector strip for supply lines to the tractor unit, positioned approx. 1,000 mm from the lower edge of the external frame profile * Lashing chain attachment points on the inner left and right of the front wall, including aluminium tray below left and right for storing chains or tie-down straps * Behind the front wall: 12 mm thick DELIGNIT floor covering, bolted * 2 additional pairs of bolted lashing rings (LC 5,000 daN) * Electric cable winch, approx. 5,400 kg pulling force, with radio remote control. Steel cable approx. 24 m long, cable diameter approx. 9.5 mm, incl. cable pressure roller * Pulley for the cable winch with shackle and bolted lashing ring

Stav: nový, maximálna hmotnosť nákladu: 38 500 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Our complete vehicle inventory with immediately and soon available vehicles can be found on our website. Extract from the equipment. Complete equipment details on request. EQUIPMENT: * Gooseneck, approx. 4,100 mm long, with central beam * Extendable loading platform, approx. 9,400 mm long, with rear bevel approx. 350 mm x 10°, and integrated mounting rail for loose ALU loading ramps * Pneumatic locking with conical locking bolt and reinforced locking positions; supply lines safely routed within the extendable beams and automatically adapting to the current platform length * Technical fifth-wheel load: 18,000 kg * For tractor units: 4 x 2 and 6 x 2 * TPMS tyre pressure monitoring system compliant with ECE R 141 * BPW axles and suspension, all axles hydro-mechanically forced-steered, mounted on turntables * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tyres. Brand at our discretion * ASPÖCK-UNIBOX * 3 kW electro-hydraulic unit for control of hydraulic functions. Without supply connections installation on tractor unit * 4 pairs of recessed lashing rings in the gooseneck outer frame: - Front three pairs flat (LC 10,000 daN) - Rear pair foldable outwards (LC 10,000 daN) * 4 pairs of stake pockets recessed in the gooseneck outer frame, for plug-in stakes approx. 100 x 50 mm * 2-inch kingpin * Mechanical landing legs with 2-speed gearbox and crank. JOST Module B - static test load approx. 50,000 kg * Approx. 32 mm wooden floor encased in ALU Omega profiles on gooseneck and loading area * 10 pairs of recessed flat lashing rings in the loading area outer frame, foldable outwards * 1 pair of lashing rings each before the last axle and at the trailer rear crossmember (LC 10,000 daN) * All other lashing rings (LC 5,000 daN) * 6 pairs of stake pockets recessed in the loading area frame, for plug-in stakes approx. 100 x 50 mm * 1 spare wheel carrier beneath loading platform, right side driving direction * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted on the left under the loading area (driving direction) * Bevel on the vehicle's rear crossmember, approx. 350 mm x 10° * Integrated mounting rail for loose ALU loading ramps at the vehicle's rear crossmember * 1 pair of drop-in tube supports at the rear crossmember * Remote steering from front and rear via cable remote control, axle tracking control, no installation in tractor unit * Round NATO socket at the front connector bracket (Maeler & Kaege VG 96 917) * 1 LED work light each left and right on the front wall, wired to the tractor unit connector bracket * One locking point in extension, every approx. 500 mm * Holder for plug-in stakes inside the gooseneck front wall when not in use * 4 wheel chocks with holder beneath the loading area * (Galvanized) extensions extendable approx. 230 mm per side (without timber planks) * 1 LED work light each left and right in front of axles, wired to connector bracket for tractor unit Kjdpoy Augdsfx Ac Nelr * 2 axle load gauges mounted on the left side including axle load diagram * 1st axle with start-assist * Under gooseneck and at rear crossmember left and right: one holder each for warning panels * Acoustic warning signal for reversing * EU reflector at rear of vehicle

Stav: nový, maximálna hmotnosť nákladu: 42 900 kg, celková hmotnosť: 55 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 29 000 mm, celková šírka: 2 540 mm, Výbava: ABS, Náš kompletný vozový park s okamžite a krátkodobo dostupnými vozidlami nájdete na našej webovej stránke. Výpis z výbavy. Kompletnú výbavu poskytneme na požiadanie. LOŽNÁ PLOCHA: * Labutí krk, dĺžka cca 3 900 mm so stredovým nosníkom * Ložná plocha vo dvojito výsuvnom prevedení, dĺžka cca 9 300 mm * Na stredovom nosníku je pevne privarený cca 200 mm široký podkladový stôl * Pneumatické uzamykanie s kónickým uzamykacím čapom a zosilnenými uzamykacími pozíciami; napájacie vedenia sú chránené vedené vo výsuvných nosníkoch a automaticky sa prispôsobujú aktuálnej dĺžke ložnej plochy (s výnimkou napájania prvej a druhej uzamykacej pozície) * Technická zaťažiteľnosť sedla: 25 000 kg Pre TRZ: 4 x 2, 6 x 2 a 6 x 4 * TPMS – systém kontroly tlaku v pneumatikách podľa ECE R 141 * BPW nápravy a zavesenie; všetky nápravy hydromechanicky nútene riadené, namontované na točni * Technická nosnosť náprav: po 12 000 kg; vzduchové odpruženie so zdvíhacím a spúšťacím ventilom * 275/70 R 22.5 3PMSF dvojmontáž; značka podľa nášho výberu * ASPÖCK-UNIBOX na pripojovacej lište vpredu so zásuvkami 24N, 24S & 15 pin * 3 kW elektrohydraulický agregát na ovládanie hydraulických operácií * 3 páry zapustených upevňovacích ôk v vonkajšom ráme labutieho krku, vyklápacie smerom von * Pri kráľovskom čape 1 pár upevňovacích ôk (LC 10 000 daN) – všetky ostatné upevňovacie oká (LC 5 000 daN) * 3 páry vreciek na stĺpiky zapustených v vonkajšom ráme labutieho krku, pre nasadzovacie stĺpiky cca 100 x 50 mm * 1 priečna lišta na vrecká na stĺpiky namontovaná v podlahe ložnej plochy labutieho krku, pre stĺpiky cca 100 x 50 mm * 1x vzadu na labuťom krku * 2-palcový kráľovský čap * Mechanické sedlové podpery s 2-stupňovou prevodovkou a kľukou * 8 párov vreciek na stĺpiky zapustených v vonkajšom ráme ložnej plochy, pre nasadzovacie stĺpiky cca 100 x 50 mm * 10 párov zapustených upevňovacích ôk v vonkajšom ráme ložnej plochy, vyklápacie smerom von * Dodatočné riadenie zpredu a zozadu ovládateľné pomocou káblového diaľkového ovládania so sledovaním jazdnej stopy náprav, bez inštalácie v ťahači Kljdeyvnd Nspfx Ac Ner * U poslednej nápravy aktivované vyfukovanie vzduchových mechov pri zatiahnutí parkovacej brzdy * Predná stena z ocele, cca 1 600 mm vysoká, certifikované vyhotovenie podľa EN12642:2016 XL * Okrúhla NATO zásuvka na pripojovacej lište vpredu (Maeler & Kaege VG 96 917) * 1 LED pracovné svetlo vľavo a vpravo pri sedlových podperách, s kabelážou na pripojovaciu lištu k ťahaču * Na labuťom krku a ložnej ploche cca 32 mm drevená podlaha * Na výsuvnom profile s veľkým prierezom uzamykacia pozícia každých cca 500 mm * Na výsuvnom profile s malým prierezom uzamykacia pozícia každých cca 1 000 mm, čím vzniká možnosť uzamknutia každých cca 500 mm * Výrezy v vonkajšom ráme ložnej plochy na zavesenie napínacích pásov (LC 2 500 daN) * 4 priečne lišty na vrecká na stĺpiky namontované v podlahe ložnej plochy pre stĺpiky cca 100 x 50 mm * 4 zakladacie kliny s držiakom pod ložnou plochou * 1 uzamykateľný INOX náradový box, cca 2 390 x 800 x 500 mm (D x Š x V), namontovaný pod ložnou plochou vľavo v smere jazdy * 1 dodatočný uzamykateľný INOX náradový box, cca 1 250 x 500 x 550 mm (D x Š x V), namontovaný pod ložnou plochou vpravo v smere jazdy * 1 LED pracovné svetlo vľavo a vpravo pred nápravami, vrátane kabeláže * 2 manometre nápravovej nosnosti namontované na ľavej strane vrátane diagramu zaťaženia náprav * 1. náprava s automatickou funkciou zdvíhacej nápravy a rozjazdovou funkciou

Stav: nový, celková hmotnosť: 55 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Rok výroby: 2025, Výbava: ABS, Our complete vehicle inventory, including immediately and shortly available vehicles, can be found on our website. Excerpt from the equipment list. Complete specification upon request. CARGO AREA: * Gooseneck, length approx. 4,300 mm, with central beam * Cargo area with double extendable design, length approx. 9,300 mm * On the central beam, a fixed support table approx. 200 mm wide is welded * Pneumatic locking with tapered locking bolts and reinforced locking positions, supply lines are protected inside the extendable beams and automatically adapt to the respective platform length (except for the first locking supply) * Technical king pin load: 25,000 kg For tractor units: 4 x 2, 6 x 2, and 6 x 4 * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, all axles hydraulically/mechanically forced-steered, mounted on turntables Kedpfsxc Axxox Ac Nolr * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * 275/70 R 22.5 3PMSF twin tires; brand at our discretion * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S, and 15-pin sockets * 3 kW electro-hydraulic unit for hydraulic operations control. Without supply line installation at the tractor unit * 4 pairs of recessed lashing rings on the gooseneck outer frame, foldable outwards * At the king pin, 1 pair of lashing rings (LC 10,000 daN); all other lashing rings (LC 5,000 daN) * 4 pairs of stake pockets integrated into the gooseneck outer frame for plug-in stakes approx. 100 x 50 mm * 1 crosswise stake pocket rail mounted in the gooseneck floor for plug-in stakes approx. 100 x 50 mm. 1 at the rear of the gooseneck * 2" king pin * Mechanical landing legs with 2-speed gearbox and hand crank * Approx. 32 mm wooden flooring encased in ALU omega profiles on the gooseneck and cargo area * 10 pairs of recessed lashing rings lying in the cargo area outer frame, foldable outwards: - in front of the last axle and at the trailer end crossmember, one pair each of lashing rings (LC 10,000 daN) - all other lashing rings (LC 5,000 daN) * 8 pairs of stake pockets integrated into the cargo area outer frame for plug-in stakes approx. 100 x 50 mm * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the cargo area on the left in direction of travel * Steering from front and rear can be controlled via cable remote, with axle alignment monitoring, without installation into the tractor unit * Steel front wall, approx. 1,800 mm high, certified according to EN12642 : 2016 XL * Circular NATO socket at front connection bar (Maeler & Kaege VG 96 917) * 1 LED work light each left and right at the landing legs, wired to the tractor unit connection bar * 3 crosswise stake pocket rails mounted in the cargo area floor for plug-in stakes approx. 100 x 50 mm * 1 additional removable intermediate table, approx. 500 mm wide, for the large cross-section pull-out pipe, with hardwood covering * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the cargo area on the right in direction of travel * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the cargo area on the left in direction of travel * WADER container pockets in the cargo area for transport of: 1x 20' container at load center, 2x 20' containers, 1x 40' container * 1 LED work light each left and right in front of the axles

Stav: nový, maximálna hmotnosť nákladu: 48 300 kg, celková hmotnosť: 71 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment. Complete equipment details available upon request. GOOSENECK: * Gooseneck with integrated single-axle running gear (pendulum axle) in removable design * Gooseneck hydraulically liftable and lowerable, including hydraulic connection linked with the hydraulic axle compensation of the first axles * Length: approx. 5,200 mm, with a front bevel of approx. 60° * Fifth wheel load according to data sheet: W25-DSR2700-12/22.7 * For tractor units: 6x4 or 8x4 * Front steel bulkhead, removable, approx. 400 mm high, in beveled design * 1 pair mechanical landing legs at the front of the gooseneck * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * 1 spare wheel carrier inside on the front wall of the gooseneck with a crane arm * 2 pairs of flush-mounted lashing rings on the gooseneck (LC 2,500 daN) * 2 pairs of flush-mounted lashing rings in the front external frame of the running gear, fold-out to the outside (LC 10,000 daN) * 1 pair of lashing rings at the transition from the running gear to the loading platform (LC 10,600 daN) * On the gooseneck: 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized finish * On the gooseneck: 1 plug-in aluminum rear board, approx. 400 mm high, anodized finish * 3.5-inch kingpin * TPMS tire pressure monitoring system according to ECE R 141 * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * 1 INOX tool box with 1 lid, mounted on the gooseneck to the right in the direction of travel by the aluminum side wall, approx. 1,350 x 400 x 400 mm (L x W x H) LOADING PLATFORM: * Low bed with externally mounted beams, designed as a telescoping low-height loading platform with a front extension including a fixed approx. 50 mm thick hardwood floor * Length x width approx. 8,000 mm x 2,740 mm * Mechanical bolt and clevis coupling from low bed to running gear for swapping the loading platform or installing extension beams * Locking position approximately every 500 mm on the extension Kodpfx Aoyhkqnoc Njlr * 4 pairs of flush-mounted lashing rings set into the loading platform, distributed along the external frame (LC 10,000 daN) * 1 lashing ring each left and right on the rear cross member (LC 10,000 daN) * Fold-out extensions, approx. 230 mm per side (WITHOUT wooden planks) * Loose extension planks, steel-framed * Prepared for installation of bolt-on container locks for 1x 20' or 1x 40' container on the side beams. Without container locks * 6 pairs of threaded blocks between the lashing rings under the upper flange on the side beams for mounting M24 lashing eyes (LC 8,000 daN) * 2 pairs of M24 lashing eyes (LC 8,000 daN) included REAR RUNNING GEAR: * Rear running gear with closed external frame, checker plate covering, and continuous prism excavator recess, approx. 1,450 x 900 x 505 mm, open at the rear * Pendulum axles, all axles hydro-mechanically force-steered * Hose rupture valve on the axle equalizing cylinders with automatic reset function * Hydraulic cylinders with shut-off valves and pre-insert for securing in raised position * Axles finish-painted with 2 layers of 2K paint, plain in DB 7350 Novagrau * Technical axle load: 12,000 kg each * Hydraulic axle compensation * 245/70 R 17.5 3PMSF. Brand at our discretion * Remote steering from front and rear via cable remote control, with axle alignment control, no installation in the tractor

Stav: nový, maximálna hmotnosť nákladu: 36 400 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment. Full specification available on request. Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 6° * For tractor units: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX at the front junction box with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for controlling hydraulic functions, except for hydraulic winches. Without installation of supply connections on the tractor unit * Gooseneck outer beams with mounting holes for screw-in lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * One mounting hole at the top rear of the gooseneck’s outer beams for a screw-in lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * 3 pairs of recessed lashing rings inside the gooseneck outer beam (LC 5,000 daN) Kljdpfsyhkqujx Ac Ner * 3 pairs of recessed lashing rings in the middle of the gooseneck (LC 5,000 daN) * 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) * Grating surface with 5 mm steel plate reinforcement on the gooseneck and rear taper * 2'' kingpin * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * Spiral cable (approx. 35 mm², approx. 3.5 m) to supply the electro-hydraulic unit and/or electric winch between trailer and tractor unit with plug (NATO-NATO) * 1 pair of removable ALU sideboards on the gooseneck, approx. 400 mm high, anodized finish LOADING PLATFORM: * Loading platform, approx. 9,600 mm long, with rear taper approx. 900 mm x 6° * Section after gooseneck hydraulically liftable and lowerable, approx. 3,000 mm, load capacity up to approx. 9,000 kg * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle rear steering. 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: each 12,000 kg * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires, brand of our choice, load index 143/141J (144/144F) * Mechanical landing gear with 2-speed gearbox and crank * Continuous grating surface with approx. 5 mm steel plate reinforcement for extra strength, designed for point loads: on the lift bed and on the loading platform * Painted sand coating on the cover plates of the gooseneck as well as transition areas between neck and lift bed, lift bed and loading platform, as well as between loading platform and ramps * 1 mounting adapter for spare wheel under the loading platform on the right in front of axles * Cut-outs in the outer frame of the loading platform and lift bed for hanging tie-down straps (LC 2,000 daN) * 11 pairs of recessed fold-out lashing rings in the outer frame of the loading platform (LC 10,000 daN): - 3 pairs in the outer frame of the lift bed - 8 pairs in the outer frame of the loading platform * 11 pairs of recessed lashing rings along the central beam (LC 5,000 daN): - 3 pairs in the lift bed - 8 pairs in the rear section of the loading platform * Control valves for the hydraulic ramps on the right side of the vehicle * 1 pair of foldable mechanical rear supports, single-hand operation HYDRAULIC LOADING RAMPS: * 1 pair of two-piece AXS steel ramps with length approx. 4,920 mm and a

Stav: nový, maximálna hmotnosť nákladu: 36 500 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our full range of vehicles, including those available for immediate or short-term delivery, on our website. Extract of equipment features. Full specification available on request. - Gooseneck, approx. 4,100 mm long, with central beam - Platform with double-extendable design, approx. 9,400 mm length - BPW axles and suspension - All axles hydro-mechanically forced steered - Technical axle load: 12,000 kg - Air suspension with lifting/lowering valve - Tyres: 235/75 R 17.5 3PMSF, twin tyres - WABCO brake system, EBS-E - 3 kW electro-hydraulic power unit for hydraulic control operations; supply connections to tractor unit not included - 4 pairs of stake pockets integrated into the outer frame of the gooseneck for insertable stanchions approx. 100 x 50 mm - 2-inch king pin Kjdpswvzg Refx Ac Nolr - 8 pairs of stake pockets integrated into the outer frame of the loading platform for insertable stanchions approx. 100 x 50 mm - 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the platform on the left side in direction of travel - Remote steering from front and rear via cable remote control with pushbuttons, autotraction control for the axles, no installation in tractor unit - 2 axle load gauges mounted on the left side - Front wall made of steel, approx. 1,600 mm high - 3 cross-mounted stanchion pocket strips in the loading platform floor for insertable stanchions approx. 100 x 50 mm - 1 cross-mounted stanchion pocket strip in the floor of the gooseneck for insertable stanchions approx. 100 x 50 mm - 1 additional lockable INOX toolbox mounted under the platform - WADER container pockets in the platform for transport of: 2x 20' containers or 1x 40' container - Central lubrication system with 2 pumps, BEKAMAX brand - Complete HRM metal coating (High Resistance Metallisation)

Stav: použitý, pohotovostná hmotnosť: 10 600 kg, maximálna hmotnosť nákladu: 22 500 kg, celková hmotnosť: 33 100 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 12/1984, dĺžka ložného priestoru: 11 900 mm, šírka ložného priestoru: 2 730 mm, výška ložného priestoru: 950 mm, zavesenie: oceľ, veľkosť pneumatiky: 7.50R15, farba: sivý, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Miesto vozidla: Bovenden, 3-nápravový, nápravy SAF, listové pruženie, upevňovacie oká, dvojdielne nájazdové rampy, mechanické rampy, bočná hliníková ochrana proti podjazdu, podpery, dvojmontáž pneumatík. Kljdpfei Rp A Njx Ac Nsr Nadstavba: 3-nápravový pozdĺžne znížený náves so dvojdielnymi mechanickými nájazdovými rampami, ložná dĺžka spodnej plošiny cca 8 900 mm! Údaje o príslušenstve bez záruky, zmena, medzičasný predaj a omyly vyhradené!

Stav: nový, maximálna hmotnosť nákladu: 37 619 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 240 mm, šírka ložného priestoru: 2 550 mm, celková šírka: 2 550 mm, celková výška: 3 570 mm, Rok výroby: 2025, Výbava: ABS, Kässbohrer K.SLS 3 / 0N ? 18/30 | Year of Manufacture 2025 | NEW | 40t ramps | Top Equipment Location: Germany Condition: New / unused Availability: Immediately Description For sale: a brand new Kässbohrer K.SLS 3 / 0N ? 18/30 low loader trailer, year 2025. Perfect for transporting construction machinery, equipment, and heavy goods. Robust chassis, high-quality axles, heavy-duty ramps – ready for immediate use. Technical Specifications Dimensions • Total length: 13,190 mm • Platform length: 9,240 mm • Platform height: 875 mm • Total width: 2,550 mm (+600 mm with side extensions) • Gooseneck length: 3,950 mm • Unladen weight: approx. 10,381 kg Weights • Perm. total weight at 80 km/h: 48,000 kg • Perm. total weight at 60 km/h: 52,800 kg • Total axle load: 30,000 kg • King pin load: up to 18,000 kg Running Gear & Axles • 3 BPW axles, air-suspended, drum brakes • 1 trailing axle at rear • Lift axle (load-dependent + automatic control from cab) • Tyres: 245/70 R17.5, M+S + 3PMSF • Tyre pressure monitoring R141 • Wabco EBS 4S/3M, ABS + RSS • Wabco Smartboard (axle load, suspension, diagnostics, etc.) Ramps & Loading Area • Folding 40t drive-on ramps • Ramp length: 2,750 mm • Ramp width: 850 mm • Hydraulic sliding system • 45-mm hardwood floor + checker plate over wheel arches Load Securing • Multiple lashing points: 8,000 daN and 13,400 daN • 7×2 stake pockets + plug-in stakes • Container locks for 1×20 ft • Front wall 450 mm, side & rear walls made of aluminium Body & Chassis • High-strength S700 MC steel • Partially metallized (Zn/Al 85/15) – strong corrosion protection • Rear angle: 10°, 500 mm • 2" king pin • Mechanical support legs at front Klsdsx Efzuspfx Ac Ner • 45t supports at rear Equipment • 2× tool boxes • Rotating beacon • LED lighting • Rear work lights • Wheel chocks • Extensions 9×2 (up to +300 mm) • Stake box • Side & rear reflector strips Colour: RAL 3020 Traffic Red For further information, please feel free to contact us.

Stav: použitý, pohotovostná hmotnosť: 11 550 kg, maximálna hmotnosť nákladu: 30 450 kg, celková hmotnosť: 42 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2019, ďalšia kontrola (TÜV): 01/2027, dĺžka ložného priestoru: 13 450 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 700 mm, objem nakladacieho priestoru: 23 m³, zavesenie: vzduch, farba: červená, Rok výroby: 2018, typ prevodu: mechanický, Výbava: ABS, Pohotovostná hmotnosť: 11 550 kg, prípustná celková hmotnosť: 42 000 kg, ložný priestor (D Š V): 13 450 mm x 2 540 mm x 700 mm, objem ložného priestoru: 23 m³, vzduchové odpruženie, zdvíhacia náprava: 1. náprava, elektronický brzdový systém EBS, riadenie nasledovnej nápravy: 3. náprava, dvojmontáž, minimálna dĺžka 13,45 m, maximálna dĺžka 18,20 m, pohotovostná hmotnosť 11 550 kg, záťaž na sedlo 18 000 kg, celková hmotnosť 48 000 kg, výnimka DE, výsuvné, hydraulické nastaviteľné rampy, 3. náprava nútene riadená, pneumatiky 235/75R17,5 dvojité, navijak, STK do 01-2027, YAMT13XXXJ0102830, Nezáväzná ponuka, zmeny a medzičasný predaj vyhradené. Obrázok nemusí zodpovedať ponuke. Ksdpfx Acjy Dng Te Njlr

Stav: použitý, konfigurácia náprav: 3 nápravy, prvá registrácia: 04/2011, dĺžka ložného priestoru: 9 400 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, celková dĺžka: 12 700 mm, celková šírka: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75R17.5, farba: modrá, Rok výroby: 2011, Výbava: ABS, = Additional options and accessories = - Lift axle = Remarks = SAF axle with drum brakes. 1 x lift axle. 1 x self-steering trailing axle. = Further details = Axle configuration Tyre size: 235/75R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tyres; Tyre tread left inner: 40%; Tyre tread left outer: 40%; Tyre tread right inner: 40%; Tyre tread right outer: 40% Rear axle 2: Twin tyres; Tyre tread left inner: 70%; Tyre tread left outer: 70%; Tyre tread right inner: 70%; Tyre tread right outer: 70% Rear axle 3: Twin tyres; Steered; Tyre tread left inner: 50%; Tyre tread left outer: 50%; Tyre tread right inner: 50%; Tyre tread right outer: 50% Weights Unladen weight: 10,500 kg Payload: 44,500 kg Gross vehicle weight: 55,000 kg Identification Type number: STN-3U / HYDRAULIC RAMP / LIFT A = Company information = ALL PRICES ARE NET EXPORT PRICES. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Govorim po russki. We strive to provide correct information, but no rights can be derived from the texts entered. Kljdjy Daxzopfx Ac Njr

Stav: dobrý (použitý), konfigurácia náprav: 3 nápravy, prvá registrácia: 03/2013, zavesenie: vzduch, veľkosť pneumatiky: 235/75R17.5, farba: červená, Rok výroby: 2013, = Further Options and Accessories = - Air suspension = Notes = Faymonville Euro low loader with detachable gooseneck for sale Specifications 4 wheel recesses, each 2 meters Width: 2.55 m Extendable width: 0.25 m Low bed: 8 meters Deck above axles: 4.30 m Gooseneck top: 3.10 m Loading height (driving position): 0.50 m German registration Tyres: 80 percent SAF axles 3 steered axles Robust and well-maintained low loader, immediately ready for heavy-duty transport. = Further Information = Axle configuration Kjdpfxoyw Sxto Ac Nslr Tyre size: 235/75R17.5 Axle brand: SAF Suspension: Air suspension Rear axle 1: Twin tyres; Max. axle load: 10,700 kg; Steered; Tyre tread left inner: 70%; Tyre tread left outer: 70%; Tyre tread right inner: 70%; Tyre tread right outer: 70% Rear axle 2: Twin tyres; Max. axle load: 10,700 kg; Steered; Tyre tread left inner: 70%; Tyre tread left outer: 70%; Tyre tread right inner: 70%; Tyre tread right outer: 70% Rear axle 3: Twin tyres; Max. axle load: 10,700 kg; Steered; Tyre tread left inner: 70%; Tyre tread left outer: 70%; Tyre tread right inner: 70%; Tyre tread right outer: 70% Weights Unladen weight: 14,700 kg Payload: 17,400 kg Gross vehicle weight: 32,100 kg Condition Technical condition: good Visual condition: good Product safety Manufacturer: Faymonville BE Further Information Please contact Gerrit Haverhoek for more information.

Stav: nový, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Ďalšie informácie tu: Kodev D Abmjpfx Ac Njlr

Stav: nový, maximálna hmotnosť nákladu: 36 461 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 480 mm, celková výška: 860 mm, Rok výroby: 2026, Technical Description Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). 30 mm thick hardwood flooring. Loading Platform: Loading area behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer of approx. 1,000 mm x 8°. 6 pairs of fold-out lashing rings on the outside (LC 5,000 daN). 2 pairs of fold-out lashing rings on the outside (LC 10,000 daN). 1 pair of fold-out lashing rings on the inside at the front center beam (LC 10,000 daN). Grating surface C40/4 (point load 2.3 tons on an area of 20 x 20 cm), tread plate covering above the axles. Two-Part Steel Ramps: One pair of galvanized two-piece steel ramps approx. 3,185 + 1,420 x 1,250 mm with C40/5 grating (point load 8 tons on an area of 20 x 20 cm). Ramp with hydraulically folding ramp sections, hydraulic lifting device. Maximum load per pair: 40,000 kg. According to Regulation 1230/2012/EU, ramps with a length less than 300 mm do not need to be included in the overall vehicle length of 16,500 mm in transport position. Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load). Tyres: 235/75 R17.5 3PMSF tyres as per manufacturer's choice. TPMS: TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the towing vehicle is via the standard EBS interface according to ISO 11992. For proper display, the towing vehicle must be capable of transmitting and displaying this data. Axles: BPW axles and suspension, 2 rigid axles, 1 self-steering axle. Technical axle load: 12,000 kg Electromagnetic reverse lock, activated via reverse gear and manually. Air suspension with lift and lower valve. Axle tool kit. Brake System: WABCO brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Electrical System: Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) LED lighting. All LED side marker lamps flash with the indicator. ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets. Connections according to ISO: 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Steel Construction: Steel construction from high-strength fine-grained steels. Kljdpfsw Dl Hwjx Ac Ner Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Curtainsider Body (Tarp Body): Curtainsider body approx. 3,960 mm - Galvanized front wall with tensioning mechanism for sliding curtains. - Roof by "EDSCHA" brand, forward-sliding on aluminium roof rail profiles (bolted to front and rear walls). - 3 pairs of movable stanchions in the loading area. - Rear hydraulically extendable left and right by approx. 750 mm. - Sliding roof with foldable portal support. - Sliding curtain with 700 mm reserve length, lashing straps at approx. 600 mm intervals. - Height of upper edge (loaded): approx. 3,960 mm. - Driving with open sliding roof is not permitted and will damage the tarp. Paintwork: Entire steel structure is automatically shot-blasted using a turbine after welding. Second blasting with corundum for optimal adhesion of coating system. HRM metallizing of the complete vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimum corrosion protection. Final coating with 2 coats of 2K finish paint, single color in a shade of choice according to RAL system 841GL. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint.

Stav: nový, maximálna hmotnosť nákladu: 36 156 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, MAX200-N-3A-13.60-19.5-2.54 Technical Data Speed: 80 km/h Gross vehicle weight: 45,000 kg Fifth-wheel load: 18,000 kg Axle load: 27,000 kg Unladen weight (+/- 3%): 8,844 kg Payload approx.: 36,156 kg Loading platform length: 13,600 mm Loaded saddle height: 950 -> 1,050 mm Rear overhang radius: 2,300 mm Extendable by: 3,400 mm Axle spacing: 1,360 / 1,405 mm Overall width: 2,540 mm Technical Description Loading Platform: Extendable loading platform with pneumatically operated locking. 2 pairs of lashing rings (LC 5,000 daN). 1 pair of lashing rings (LC 10,000 daN). 6 pairs of fold-out lashing rings (LC 5,000 daN). 2 pairs of fold-out lashing rings (LC 10,000 daN). Cut-outs in the outer frame of the loading platform for attaching lashing straps. (LC 2,000 daN) Landing Gear: JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (test load: 50t). Axles: SAF axles: SAF CD axles, air suspension, disc brakes (377 mm), lifting/lowering function. (ET 120). Trailing steering axles with electro-magnetic reverse lock, can be activated via reverse gear or manually. Axle tools. (± 80kg) Brake System: Brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor unit. Steel Construction: Frame made of high-strength fine-grained steels. Steel grades: S355J2+N / S355MC (yield strength 355MPa) S690QL / S700MC (yield strength 690MPa) Painting: Kljdpfjg Sk Tvjx Ac Nor First-class and durable corrosion protection of the standard shot-blasted welded frame ensured by a 2-component (2K) zinc dust primer. High-quality single-colour 2-component (2K) top coat, in a RAL colour of your choice. Rear section metallized and painted RAL 9010 (pure white). No metallic paint possible. Electrical Equipment: Electrical system in accordance with EU regulations, LED lighting 24V ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets. Wiring according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Included Accessories: At the galvanized front connection strip yellow-red air couplings. 2 wheel chocks with holder. 2" kingpin Galvanized steel headboard approx. 2,200 mm high (± 105kg) EN12642-XL. Yellow reflector tape according to EU regulations at sides, extension, and rear of trailer. European reflector plates (red-yellow) at rear of trailer. Loading platform with approx. 38 mm thick hardwood floor (± 320kg). 10 pairs of socket pockets for 100 x 50 mm drop-in stakes in the outer frame (± 30kg). 1 spare wheel holder under the cargo bed, right-hand side. Tyres 435/50 R 19.5, manufacturer’s choice. One mudflap at the rear of the trailer. Manual and description on USB stick. Bracket for rotating beacon at rear. Mountings for warning signs with socket at gooseneck and rear panel, left and right. One INOX toolbox crosswise under the loading platform (1,000 x 400 x 2,500 mm) (± 135kg). 6 pairs WADER container pockets on the loading area, for 1x20' container, 2 x 20' containers, or 1 x 40' container. Extension with an additional locking point for a 45' container. (± 90kg) 4 pairs WADER container locks (± 60kg). 10 pairs zinc-plated drop-in stakes approx. 100 x 50 mm, 1,000 mm high (± 220kg). 3 pairs stake pocket bars, mounted crosswise in the loading platform for 100 x 50 mm drop-in stakes (± 95kg). Storage for 1,000 mm drop-in stakes (± 45kg). 1 spare wheel 435/50.